Fix profiles #35

PrusaSlicer/filament/ColorFabb nGen Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.1.1+win64 on 2019-12-16 at 23:20:59 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-06-06 at 01:06:05 UTC
 bed_temperature = 90
 bridge_fan_speed = 100
 compatible_printers = 
@@ -42,6 +42,7 @@ filament_type = NGEN
 filament_unload_time = 0
 filament_unloading_speed = 90
 filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
 filament_wipe = nil
 first_layer_bed_temperature = 85
 first_layer_temperature = 240
@@ -50,5 +51,5 @@ max_fan_speed = 50
 min_fan_speed = 35
 min_print_speed = 15
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}24{else}45{endif} ; Filament gcode"
-temperature = 240
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4}0.2{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6}0.05{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4}0.12{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.02{else}0{endif} ; Filament gcode LA 1.5"
+temperature = 235

PrusaSlicer/filament/ERYONE PLA Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 04:51:12 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-06-04 at 01:33:10 UTC
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -51,5 +51,5 @@ max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 15
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}18{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}30{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4}0.2{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6}0.04{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4}0.06{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.02{else}0{endif} ; Filament gcode LA 1.5"
 temperature = 215

PrusaSlicer/filament/Generic ABS 240º Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 04:50:58 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-06-04 at 01:31:04 UTC
 bed_temperature = 115
 bridge_fan_speed = 30
 compatible_printers = 
@@ -10,7 +10,7 @@ disable_fan_first_layers = 4
 end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 0
-fan_below_layer_time = 20
+fan_below_layer_time = 30
 filament_colour = #3A80CA
 filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
@@ -51,5 +51,5 @@ max_fan_speed = 30
 min_fan_speed = 30
 min_print_speed = 15
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}15{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}30{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4}0.2{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6}0.02{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4}0.04{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.02{else}0{endif} ; Filament gcode LA 1.5"
 temperature = 240

PrusaSlicer/filament/Generic ABS 255º Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 04:50:36 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-06-04 at 01:31:08 UTC
 bed_temperature = 115
 bridge_fan_speed = 40
 compatible_printers = 
@@ -9,8 +9,8 @@ cooling = 1
 disable_fan_first_layers = 4
 end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
+fan_always_on = 0
+fan_below_layer_time = 30
 filament_colour = #3A80CA
 filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
@@ -51,5 +51,5 @@ max_fan_speed = 30
 min_fan_speed = 30
 min_print_speed = 15
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}15{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}30{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4}0.2{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6}0.02{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4}0.04{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.02{else}0{endif} ; Filament gcode LA 1.5"
 temperature = 255

PrusaSlicer/filament/Generic PETG Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 03:22:23 UTC
+# generated by PrusaSlicer 2.3.0+win64 on 2021-01-16 at 02:16:35 UTC
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -7,7 +7,7 @@ compatible_prints =
 compatible_prints_condition = 
 cooling = 1
 disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
+end_filament_gcode = "; Filament-specific end gcode\n"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 20
@@ -37,6 +37,7 @@ filament_retract_restart_extra = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
+filament_spool_weight = 0
 filament_toolchange_delay = 0
 filament_type = PETG
 filament_unload_time = 0
@@ -46,10 +47,11 @@ filament_vendor = (Unknown)
 filament_wipe = nil
 first_layer_bed_temperature = 85
 first_layer_temperature = 230
+full_fan_speed_layer = 0
 inherits = Generic PETG
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 15
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.1{else}0{endif} ; Filament gcode"
-temperature = 240
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4}0.2{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6}0.05{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4}0.12{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.02{else}0{endif} ; Filament gcode LA 1.5"
+temperature = 230

PrusaSlicer/filament/Generic PLA Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 03:22:54 UTC
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-06 at 16:17:39 UTC
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -11,11 +11,11 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 100
-filament_colour = #FF3232
+filament_colour = #FF8000
 filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
 filament_cooling_moves = 4
-filament_cost = 19
+filament_cost = 25.4
 filament_density = 1.24
 filament_deretract_speed = nil
 filament_diameter = 1.75
@@ -37,6 +37,7 @@ filament_retract_restart_extra = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
+filament_spool_weight = 0
 filament_toolchange_delay = 0
 filament_type = PLA
 filament_unload_time = 0
@@ -46,10 +47,11 @@ filament_vendor = (Unknown)
 filament_wipe = nil
 first_layer_bed_temperature = 60
 first_layer_temperature = 215
+full_fan_speed_layer = 4
 inherits = Generic PLA
 max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}18{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}30{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
+slowdown_below_layer_time = 15
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4}0.2{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6}0.04{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4}0.06{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.02{else}0{endif} ; Filament gcode LA 1.5"
 temperature = 210

PrusaSlicer/filament/PrimaSELECT PETG Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 04:50:00 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-06-04 at 01:33:21 UTC
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -51,5 +51,5 @@ max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 15
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.1{else}0{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4}0.2{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6}0.05{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4}0.12{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.02{else}0{endif} ; Filament gcode LA 1.5"
 temperature = 225

PrusaSlicer/filament/Prusament PETG 0.6 nozzle Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.1.1+win64 on 2019-12-17 at 03:39:37 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-06-04 at 01:32:08 UTC
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -42,6 +42,7 @@ filament_type = PETG
 filament_unload_time = 0
 filament_unloading_speed = 90
 filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
 filament_wipe = nil
 first_layer_bed_temperature = 85
 first_layer_temperature = 240
@@ -50,5 +51,5 @@ max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 15
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.1{else}0{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4}0.2{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6}0.05{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4}0.12{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.02{else}0{endif} ; Filament gcode LA 1.5"
 temperature = 250

PrusaSlicer/filament/SUNLU PLA+ Volcano.ini

@@ -0,0 +1,55 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-12-13 at 21:04:18 UTC
+bed_temperature = 90
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 19
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_diameter = 1.8
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 25
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
+first_layer_bed_temperature = 90
+first_layer_temperature = 215
+inherits = Generic PLA
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 15
+slowdown_below_layer_time = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4}0.2{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6}0.04{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4}0.06{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.02{else}0{endif} ; Filament gcode LA 1.5"
+temperature = 220

PrusaSlicer/print/0.04mm ULTRA DETAIL Ender3.ini

@@ -1,6 +1,7 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:12 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 17:18:39 UTC
 avoid_crossing_perimeters = 1
-bottom_fill_pattern = rectilinear
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 20
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
@@ -21,11 +22,11 @@ external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 20
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.45
 fill_angle = 45
-fill_density = 25%
+fill_density = 20%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.45
@@ -33,8 +34,10 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 20
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -44,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 40
 inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.04
 max_print_speed = 80
 max_volumetric_speed = 8
@@ -63,7 +71,7 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
@@ -85,7 +93,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -95,20 +103,20 @@ support_material_speed = 30
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 20
 top_solid_layers = 25
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.7
 travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.05mm Ender3 Volcano.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:57:57
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:43:00 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 12
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.9
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.84
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 35
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.05
 max_print_speed = 200
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 30
 top_solid_layers = 20
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.06mm 0.6 nozzle MK3 Volcano.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.1.1+win64 on 2020-03-17 at 05:04:01 UTC
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:42 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
-bottom_solid_layers = 8
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 10
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 100
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.06
 max_print_speed = 100
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 30
-top_solid_min_thickness = 0.6
-top_solid_layers = 14
+top_solid_layers = 15
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.08mm VERY DETAIL Ender3.ini

@@ -1,6 +1,7 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:29 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 17:19:02 UTC
 avoid_crossing_perimeters = 1
-bottom_fill_pattern = rectilinear
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 9
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
@@ -21,11 +22,11 @@ external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 20
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.45
 fill_angle = 45
-fill_density = 25%
+fill_density = 20%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.45
@@ -33,8 +34,10 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 20
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -44,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 40
 inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.08
 max_print_speed = 80
 max_volumetric_speed = 8
@@ -63,7 +71,7 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
@@ -85,7 +93,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -95,20 +103,20 @@ support_material_speed = 30
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 30
 top_solid_layers = 12
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.7
 travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:41:27
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:49 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
-bottom_solid_layers = 7
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 8
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 150
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.1
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 10
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:41:22
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:21 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
-bottom_solid_layers = 7
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 8
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 150
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.1
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 10
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:41:18
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:23 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
-bottom_solid_layers = 7
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 8
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 150
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.1
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 10
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.1.1+win64 on 2020-03-17 at 05:04:43 UTC
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:45 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 7
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 150
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.1
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 10
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.10mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:27:21
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:42:12 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 7
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 1.7
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.7
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 120
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.1
 max_print_speed = 110
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 45
 top_solid_layers = 10
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.10mm Ender3 Volcano.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:58:02
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:42:55 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 7
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.9
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.84
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 120
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.1
 max_print_speed = 200
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 10
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.12mm DETAIL Ender3.ini

@@ -1,6 +1,7 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:34 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 17:19:24 UTC
 avoid_crossing_perimeters = 1
-bottom_fill_pattern = rectilinear
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 7
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
@@ -21,8 +22,8 @@ external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
@@ -33,8 +34,10 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 20
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -44,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 60
 inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.12
 max_print_speed = 150
 max_volumetric_speed = 8
@@ -63,7 +71,7 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
@@ -85,7 +93,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -95,20 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 8
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.7
 travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 1.0mm Extrusion.ini

@@ -21,8 +21,8 @@ external_perimeter_extrusion_width = 1
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
@@ -33,7 +33,7 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:15
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:36 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 5
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 150
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.15
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 7
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:19
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:02 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 5
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 150
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.15
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 7
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:48
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:05 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 5
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 150
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.15
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 7
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:10
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:51:12 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 5
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 150
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.15
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 7
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.15mm 0.6 nozzle MK3.ini

@@ -21,8 +21,8 @@ external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -33,7 +33,7 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1

PrusaSlicer/print/0.15mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:03:17
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:43:56 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 5
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 1.7
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.7
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 120
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.15
 max_print_speed = 133
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 45
 top_solid_layers = 7
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.15mm Ender3 Volcano.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:48:25
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:42:44 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 5
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.9
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.84
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 120
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.15
 max_print_speed = 133
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 7
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.16mm OPTIMAL Ender3.ini

@@ -1,6 +1,7 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:39 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 17:19:46 UTC
 avoid_crossing_perimeters = 1
-bottom_fill_pattern = rectilinear
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 6
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
@@ -21,8 +22,8 @@ external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
@@ -33,8 +34,10 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -44,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 80
 inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.16
 max_print_speed = 110
 max_volumetric_speed = 8
@@ -63,7 +71,7 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
@@ -85,7 +93,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -95,20 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 6
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.7
 travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 1.0mm Extrusion.ini

@@ -21,8 +21,8 @@ external_perimeter_extrusion_width = 1
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
@@ -33,7 +33,7 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 04:41:14 UTC
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:51:27 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
-bottom_solid_min_thickness = 0.5
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -21,8 +22,8 @@ external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
@@ -33,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -44,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 150
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.2
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -87,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -98,11 +106,11 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
 top_solid_layers = 5
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:39:41
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:19 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 150
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.2
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 5
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:02
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:23 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 150
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.2
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 5
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:39:03
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:51:22 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 150
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.2
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 5
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.20mm 0.6 nozzle MK3.ini

@@ -21,8 +21,8 @@ external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -33,7 +33,7 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1

PrusaSlicer/print/0.20mm Ender3 @0.8 nozzle.ini

@@ -1,11 +1,12 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-30 at 15:21:46 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 17:26:53 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 5
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 0.8
 bridge_speed = 40
 brim_width = 0
 clip_multipart_objects = 1
@@ -21,8 +22,8 @@ external_perimeter_extrusion_width = 0.85
 external_perimeter_speed = 45
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.85
 fill_angle = 45
 fill_density = 15%
@@ -33,8 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 23
 gap_fill_speed = 20
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.85
@@ -44,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 47
 inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.2
 max_print_speed = 47
 max_volumetric_speed = 8
@@ -63,7 +71,7 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
@@ -79,13 +87,13 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
-support_material_buildplate_only = 1
+support_material_buildplate_only = 0
 support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -93,22 +101,22 @@ support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 47
 support_material_synchronize_layers = 0
-support_material_threshold = 55
-support_material_with_sheath = 1
-support_material_xy_spacing = 80%
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 47
 top_solid_layers = 5
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.7
 travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.20mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:12:07
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:45:08 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 1.7
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.7
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 100
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.2
 max_print_speed = 55
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 45
 top_solid_layers = 5
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.20mm Ender3 Volcano.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-20 at 04:19:38
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:44:37 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.9
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.84
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 100
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.2
 max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,10 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -76,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -92,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 5
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.20mm FAST 0.8 nozzle MK3.ini

@@ -19,8 +19,8 @@ external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%

PrusaSlicer/print/0.20mm NORMAL Ender3.ini

@@ -1,6 +1,7 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:38:58 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 17:17:48 UTC
 avoid_crossing_perimeters = 1
-bottom_fill_pattern = rectilinear
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 5
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
@@ -21,8 +22,8 @@ external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
@@ -33,8 +34,10 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -42,8 +45,13 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 80
-inherits = 0.20mm NORMAL @ENDER3
+inherits = 0.20mm NORMAL @CREALITY
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.2
 max_print_speed = 90
 max_volumetric_speed = 8
@@ -63,7 +71,7 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
@@ -85,7 +93,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -95,20 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 5
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.7
 travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.24mm FAST Ender3.ini

@@ -1,6 +1,7 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:45 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 17:20:06 UTC
 avoid_crossing_perimeters = 1
-bottom_fill_pattern = rectilinear
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
@@ -21,8 +22,8 @@ external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
@@ -33,8 +34,10 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -44,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 74
 inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.24
 max_print_speed = 75
 max_volumetric_speed = 8
@@ -63,7 +71,7 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
@@ -85,7 +93,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -95,20 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 4
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.7
 travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 1.0mm Extrusion.ini

@@ -21,8 +21,8 @@ external_perimeter_extrusion_width = 1
 external_perimeter_speed = 32
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
@@ -33,7 +33,7 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 32
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:38:03
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:31 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 142
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.25
 max_print_speed = 142
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 4
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:38:24
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:34 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 142
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.25
 max_print_speed = 142
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 4
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:38:41
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:38 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 142
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.25
 max_print_speed = 142
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 4
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:37:46
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:51:36 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 142
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.25
 max_print_speed = 142
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 4
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.25mm 0.6 nozzle MK3.ini

@@ -21,8 +21,8 @@ external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -33,7 +33,7 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1

PrusaSlicer/print/0.25mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:47:06
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:45:37 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 1.7
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.7
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 80
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.25
 max_print_speed = 43
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 43
 top_solid_layers = 5
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.25mm Ender3 Volcano.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:42:52
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:45:22 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.9
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.84
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 80
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.25
 max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 5
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.25mm VERY FAST MK3.ini

@@ -19,8 +19,8 @@ external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%

PrusaSlicer/print/0.28mm VERY FAST Ender3.ini

@@ -1,6 +1,7 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:50 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 17:20:27 UTC
 avoid_crossing_perimeters = 1
-bottom_fill_pattern = rectilinear
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
@@ -21,8 +22,8 @@ external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
@@ -33,8 +34,10 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -44,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 64
 inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.28
 max_print_speed = 64
 max_volumetric_speed = 8
@@ -63,7 +71,7 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
@@ -85,7 +93,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -95,20 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 4
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.7
 travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.1.1+win64 on 2020-03-04 at 06:27:26 UTC
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 19:52:22 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,6 +15,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 119
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.3
 max_print_speed = 119
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 4
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:36:19
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 19:55:02 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 119
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.3
 max_print_speed = 119
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 4
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:36:41
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 19:55:49 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 119
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.3
 max_print_speed = 119
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 4
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 04:44:29 UTC
+# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:05 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
-bottom_solid_min_thickness = 0.5
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -33,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -44,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 119
 inherits = 0.30mm QUALITY 0.6 nozzle MK3
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.3
 max_print_speed = 119
 max_volumetric_speed = 25
@@ -59,7 +67,7 @@ perimeter_extrusion_width = 0.65
 perimeter_speed = 50
 perimeters = 2
 post_process = 
-print_settings_id = 
+print_settings_id = 0.30mm 0.6 nozzle MK3 Volcano
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -87,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -98,11 +106,11 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
 top_solid_layers = 4
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10

PrusaSlicer/print/0.30mm 0.6 nozzle MK3.ini

@@ -21,8 +21,8 @@ external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -33,7 +33,7 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1

PrusaSlicer/print/0.30mm Ender3 @0.8 nozzle.ini

@@ -1,11 +1,12 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-30 at 15:03:17 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 17:26:27 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 0.8
 bridge_speed = 31
 brim_width = 0
 clip_multipart_objects = 1
@@ -21,8 +22,8 @@ external_perimeter_extrusion_width = 0.85
 external_perimeter_speed = 31
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.85
 fill_angle = 45
 fill_density = 15%
@@ -33,8 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 23
 gap_fill_speed = 20
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.85
@@ -44,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 31
 inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.3
 max_print_speed = 31
 max_volumetric_speed = 8
@@ -63,7 +71,7 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
@@ -79,13 +87,13 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
-support_material_buildplate_only = 1
+support_material_buildplate_only = 0
 support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -93,22 +101,22 @@ support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 31
 support_material_synchronize_layers = 0
-support_material_threshold = 55
-support_material_with_sheath = 1
-support_material_xy_spacing = 80%
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 31
 top_solid_layers = 4
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.7
 travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.30mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:27:34
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:46:09 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 1.7
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.7
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 67
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.3
 max_print_speed = 45
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 36
 top_solid_layers = 3
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.30mm Ender3 Volcano.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:42:47
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:45:50 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.9
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.84
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 67
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.3
 max_print_speed = 67
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 3
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.30mm FAST 0.8 nozzle MK3.ini

@@ -19,8 +19,8 @@ external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%

PrusaSlicer/print/0.30mm ULTRA FAST MK3.ini

@@ -19,8 +19,8 @@ external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%

PrusaSlicer/print/0.32mm ULTRA FAST Ender3.ini

@@ -1,6 +1,7 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:55 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 17:20:47 UTC
 avoid_crossing_perimeters = 1
-bottom_fill_pattern = rectilinear
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
@@ -21,8 +22,8 @@ external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 25
-extruder_clearance_radius = 45
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
@@ -33,8 +34,10 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -44,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 56
 inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.32
 max_print_speed = 56
 max_volumetric_speed = 8
@@ -63,7 +71,7 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
@@ -85,7 +93,7 @@ support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.35
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -95,20 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 3
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.7
 travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:34:10
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:50 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 102
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.35
 max_print_speed = 102
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:34:31
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:54 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 102
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.35
 max_print_speed = 102
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:34:50
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:57 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 102
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.35
 max_print_speed = 102
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:33:20
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:45 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 102
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.35
 max_print_speed = 102
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.35mm 0.6 nozzle MK3.ini

@@ -21,8 +21,8 @@ external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -33,7 +33,7 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 36
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1

PrusaSlicer/print/0.35mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:41:40
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:46:37 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
 external_perimeter_speed = 31
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 1.7
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.7
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 58
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.35
 max_print_speed = 64
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 31
 top_solid_layers = 3
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.35mm Ender3 Volcano.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:41:27
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:46:21 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.9
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.84
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 58
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.35
 max_print_speed = 64
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 3
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:31:05
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:04 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 89
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.4
 max_print_speed = 89
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-07-18 at 15:38:36
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:09 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 89
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.4
 max_print_speed = 89
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:32:32
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:12 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 89
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.4
 max_print_speed = 89
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:30:14
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:01 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 89
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.4
 max_print_speed = 89
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.40mm 0.6 nozzle MK3.ini

@@ -21,8 +21,8 @@ external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 31
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -33,7 +33,7 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 31
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1

PrusaSlicer/print/0.40mm Ender3 @0.8 nozzle.ini

@@ -1,11 +1,12 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-30 at 15:03:22 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 17:25:55 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
 bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 0.8
 bridge_speed = 23
 brim_width = 0
 clip_multipart_objects = 1
@@ -21,8 +22,8 @@ external_perimeter_extrusion_width = 0.85
 external_perimeter_speed = 23
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.85
 fill_angle = 45
 fill_density = 15%
@@ -33,8 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 23
 gap_fill_speed = 20
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.85
@@ -42,8 +45,13 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 23
-inherits = 
+inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.4
 max_print_speed = 23
 max_volumetric_speed = 8
@@ -63,7 +71,7 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
@@ -79,13 +87,13 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
-support_material_buildplate_only = 1
+support_material_buildplate_only = 0
 support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
-support_material_extruder = 1
+support_material_extruder = 0
 support_material_extrusion_width = 0
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -93,22 +101,22 @@ support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 23
 support_material_synchronize_layers = 0
-support_material_threshold = 55
-support_material_with_sheath = 1
-support_material_xy_spacing = 80%
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 23
 top_solid_layers = 3
-top_solid_min_thickness = 0.6
+top_solid_min_thickness = 0.7
 travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.40mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:28:39
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:46:59 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
 external_perimeter_speed = 27
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 1.7
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.7
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 27
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 50
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.4
 max_print_speed = 50
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 27
 top_solid_layers = 3
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.40mm Ender3 Volcano.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-20 at 04:06:12
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 17:33:04 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.9
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.84
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 50
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.4
 max_print_speed = 55
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,10 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
-single_extruder_multi_material_priming = 1
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -76,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -92,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 3
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.40mm FAST 0.8 nozzle MK3.ini

@@ -19,8 +19,8 @@ external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 28
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:29:24
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:19 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 79
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.45
 max_print_speed = 79
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:29:17
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:23 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 79
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.45
 max_print_speed = 79
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:29:42
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:26 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 79
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.45
 max_print_speed = 79
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 46
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:29:28
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:16 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 30
 gap_fill_speed = 40
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 79
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.45
 max_print_speed = 79
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.45mm 0.6 nozzle MK3.ini

@@ -21,8 +21,8 @@ external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 28
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
@@ -33,7 +33,7 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 28
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1

PrusaSlicer/print/0.45mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:39:00
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:47:46 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
 external_perimeter_speed = 24
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 1.7
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.7
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 45
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.45
 max_print_speed = 50
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 15
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 24
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 24
 top_solid_layers = 2
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.45mm Ender3 Volcano.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 03:58:26
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:47:34 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.9
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.84
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 45
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.45
 max_print_speed = 50
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 15
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 2
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.50mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:37:18
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:48:13 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 500
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
 external_perimeter_speed = 21
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 1.7
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 500
 first_layer_extrusion_width = 1.7
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 21
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 500
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 40
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.5
 max_print_speed = 45
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 15
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 21
 top_solid_layers = 2
+top_solid_min_thickness = 0.7
 travel_speed = 170
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.50mm Ender3 Volcano.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:36:52
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:47:57 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.9
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.84
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 40
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.5
 max_print_speed = 45
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 15
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 2
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.50mm FAST 0.8 nozzle MK3.ini

@@ -19,8 +19,8 @@ external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 22
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%

PrusaSlicer/print/0.55mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:35:42
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:48:44 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
 external_perimeter_speed = 20
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 1.7
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.7
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 20
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 36
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.55
 max_print_speed = 20
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 15
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 20
 top_solid_layers = 2
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.55mm Ender3 Volcano.ini

@@ -1,6 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:33:28
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:48:28 UTC
 avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.9
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.84
@@ -31,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -39,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 36
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.55
 max_print_speed = 41
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -62,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 15
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -91,17 +103,20 @@ support_material_speed = 45
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 41
 top_solid_layers = 2
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.60mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,7 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:09:16
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:49:11 UTC
 avoid_crossing_perimeters = 1
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -13,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
 external_perimeter_speed = 18
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 1.7
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.7
@@ -32,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 18
 gap_fill_speed = 18
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -40,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 33
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.6
 max_print_speed = 45
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -63,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 10
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -76,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -92,18 +103,20 @@ support_material_speed = 43
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 18
-top_solid_min_thickness = 0.6
 top_solid_layers = 2
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.60mm Ender3 Volcano.ini

@@ -1,7 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:09:22
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:48:57 UTC
 avoid_crossing_perimeters = 1
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -13,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 33
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.9
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.84
@@ -32,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -40,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 33
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.6
 max_print_speed = 36
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -63,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 10
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -76,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -92,18 +103,20 @@ support_material_speed = 43
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 36
-top_solid_min_thickness = 0.6
 top_solid_layers = 2
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.60mm FAST 0.8 nozzle MK3.ini

@@ -20,8 +20,8 @@ external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 19
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%

PrusaSlicer/print/0.65mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,7 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:08:47
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:49:34 UTC
 avoid_crossing_perimeters = 1
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -13,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
 external_perimeter_speed = 16
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 1.7
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.7
@@ -32,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 16
 gap_fill_speed = 16
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -40,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 30
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.65
 max_print_speed = 16
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -63,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 10
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -76,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -92,18 +103,20 @@ support_material_speed = 40
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 16
-top_solid_min_thickness = 0.6
 top_solid_layers = 2
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/0.65mm Ender3 Volcano.ini

@@ -1,7 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:08:52
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:49:23 UTC
 avoid_crossing_perimeters = 1
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -13,18 +15,18 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
 external_perimeter_speed = 30
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 34
+extruder_clearance_radius = 47
 extrusion_width = 0.9
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.84
@@ -32,7 +34,10 @@ first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 12
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -40,16 +45,19 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 30
-inherits = 
+inherits = 0.40mm Ender3 @0.8 nozzle
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.65
 max_print_speed = 30
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 20
 min_skirt_length = 4
 notes = 
-only_retract_when_crossing_perimeters = 1
+only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
@@ -63,9 +71,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 10
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -76,13 +86,14 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
-support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.7
 support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
+support_material_interface_extruder = 0
 support_material_interface_layers = 2
 support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
@@ -92,18 +103,20 @@ support_material_speed = 40
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 30
-top_solid_min_thickness = 0.6
 top_solid_layers = 2
+top_solid_min_thickness = 0.7
 travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
-wipe_tower_x = 180
+wipe_tower_x = 170
 wipe_tower_y = 140
 xy_size_compensation = 0

PrusaSlicer/print/Lithophanes 0.15mm 0.6 nozzle MK3 Volcano.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.1.1+win64 on 2019-12-20 at 19:32:05 UTC
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:43 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 5
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 30
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.65
 fill_angle = 45
 fill_density = 99%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 25
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 45
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.15
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 25
-top_solid_min_thickness = 0.6
 top_solid_layers = 7
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/Lithophanes 0.20mm 0.6 nozzle MK3 Volcano.ini

@@ -1,8 +1,9 @@
-# generated by PrusaSlicer 2.1.1+win64 on 2019-12-21 at 02:50:16 UTC
+# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:50 UTC
 avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_min_thickness = 0.5
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
 bottom_solid_layers = 5
+bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -14,14 +15,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.61
 external_perimeter_speed = 30
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.61
 fill_angle = 45
 fill_density = 99%
@@ -32,8 +34,10 @@ first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 25
 gcode_comments = 0
-gcode_label_objects = 0
+gcode_label_objects = 1
 infill_acceleration = 1250
+infill_anchor = 2.5
+infill_anchor_max = 15
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -43,6 +47,11 @@ infill_overlap = 25%
 infill_speed = 45
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
 layer_height = 0.2
 max_print_speed = 150
 max_volumetric_speed = 25
@@ -86,7 +95,7 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
+support_material_interface_spacing = 0.3
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
@@ -97,14 +106,15 @@ support_material_with_sheath = 0
 support_material_xy_spacing = 80%
 thin_walls = 0
 threads = 16
-top_fill_pattern = rectilinear
+top_fill_pattern = monotonic
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 25
-top_solid_min_thickness = 0.6
 top_solid_layers = 6
+top_solid_min_thickness = 0.9
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170