Decrese max speeds for solid infill on volcano

PrusaSlicer/filament/Generic ABS 240º Volcano.ini

@@ -1,6 +1,6 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:41:26
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-21 at 16:00:35
 bed_temperature = 115
-bridge_fan_speed = 30
+bridge_fan_speed = 40
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 compatible_prints = 
@@ -21,7 +21,7 @@ filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
-filament_max_volumetric_speed = 28
+filament_max_volumetric_speed = 26
 filament_minimal_purge_on_wipe_tower = 15
 filament_notes = "SUNLU ABS\nDevilDesign ABS"
 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"

PrusaSlicer/filament/Generic ABS 255º Volcano.ini

@@ -1,6 +1,6 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:41:30
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 15:46:48
 bed_temperature = 115
-bridge_fan_speed = 30
+bridge_fan_speed = 40
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 compatible_prints = 
@@ -21,7 +21,7 @@ filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
-filament_max_volumetric_speed = 30
+filament_max_volumetric_speed = 26
 filament_minimal_purge_on_wipe_tower = 15
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"

PrusaSlicer/filament/Generic PET Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:41:03
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-12 at 02:31:59
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -39,5 +39,5 @@ max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 15
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.1{else}0{endif} ; Filament gcode"
 temperature = 240

PrusaSlicer/filament/Generic PLA Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:38:08
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:23:24
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -21,7 +21,7 @@ filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
-filament_max_volumetric_speed = 28
+filament_max_volumetric_speed = 25
 filament_minimal_purge_on_wipe_tower = 15
 filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"

PrusaSlicer/filament/HDGlass PETG Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:40:44
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-12 at 02:31:53
 bed_temperature = 75
 bridge_fan_speed = 50
 compatible_printers = 
@@ -39,5 +39,5 @@ max_fan_speed = 80
 min_fan_speed = 50
 min_print_speed = 5
 slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.1{else}0{endif} ; Filament gcode"
 temperature = 220

PrusaSlicer/filament/PrimaSELECT PETG Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:40:40
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-12 at 02:31:47
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -39,5 +39,5 @@ max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 5
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.1{else}0{endif} ; Filament gcode"
 temperature = 225

PrusaSlicer/filament/Prusament PETG 0.6 nozzle Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:40:33
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-12 at 02:31:39
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -39,5 +39,5 @@ max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 15
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.1{else}0{endif} ; Filament gcode"
 temperature = 250

PrusaSlicer/print/0.06mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:49:42
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:41:34
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 8
@@ -44,7 +44,7 @@ inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.06
 max_print_speed = 100
-max_volumetric_speed = 30
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:52:01
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:41:27
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 7
@@ -44,7 +44,7 @@ inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
 layer_height = 0.1
 max_print_speed = 150
-max_volumetric_speed = 27
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:51:56
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:41:22
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 7
@@ -44,7 +44,7 @@ inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
 layer_height = 0.1
 max_print_speed = 150
-max_volumetric_speed = 27
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:26:39
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:41:18
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 7
@@ -44,7 +44,7 @@ inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
 layer_height = 0.1
 max_print_speed = 150
-max_volumetric_speed = 27
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:22:10
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:41:30
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 7
@@ -44,7 +44,7 @@ inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.1
 max_print_speed = 150
-max_volumetric_speed = 30
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:51:52
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:15
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 5
@@ -44,7 +44,7 @@ inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
 layer_height = 0.15
 max_print_speed = 150
-max_volumetric_speed = 27
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:51:48
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:19
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 5
@@ -44,7 +44,7 @@ inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
 layer_height = 0.15
 max_print_speed = 150
-max_volumetric_speed = 27
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:26:30
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:48
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 5
@@ -44,7 +44,7 @@ inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
 layer_height = 0.15
 max_print_speed = 150
-max_volumetric_speed = 27
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 150
+solid_infill_speed = 138
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:25:00
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:10
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 5
@@ -15,13 +15,13 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.61
+external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
@@ -44,7 +44,7 @@ inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.15
 max_print_speed = 150
-max_volumetric_speed = 30
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -70,7 +70,7 @@ small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.7
 solid_infill_speed = 150
 spiral_vase = 0
 standby_temperature_delta = -5

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:51:43
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:39:07
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
@@ -44,7 +44,7 @@ inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
 layer_height = 0.2
 max_print_speed = 150
-max_volumetric_speed = 27
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:51:39
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:39:41
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
@@ -44,7 +44,7 @@ inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
 layer_height = 0.2
 max_print_speed = 150
-max_volumetric_speed = 27
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1
-solid_infill_speed = 134
+solid_infill_speed = 124
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:27:39
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:02
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
@@ -44,7 +44,7 @@ inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
 layer_height = 0.2
 max_print_speed = 150
-max_volumetric_speed = 27
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 112
+solid_infill_speed = 104
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:25:11
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:39:03
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
@@ -44,7 +44,7 @@ inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.2
 max_print_speed = 150
-max_volumetric_speed = 30
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:51:34
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:38:03
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 154
+infill_speed = 142
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
 layer_height = 0.25
-max_print_speed = 154
-max_volumetric_speed = 27
+max_print_speed = 142
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.8
-solid_infill_speed = 134
+solid_infill_speed = 124
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:51:31
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:38:24
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 154
+infill_speed = 142
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
 layer_height = 0.25
-max_print_speed = 154
-max_volumetric_speed = 27
+max_print_speed = 142
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1
-solid_infill_speed = 107
+solid_infill_speed = 99
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:38:22
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:38:41
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 154
+infill_speed = 142
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
 layer_height = 0.25
-max_print_speed = 154
-max_volumetric_speed = 27
+max_print_speed = 142
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 89
+solid_infill_speed = 83
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 00:41:47
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:37:46
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 154
+infill_speed = 142
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.25
-max_print_speed = 154
-max_volumetric_speed = 30
+max_print_speed = 142
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.7
-solid_infill_speed = 154
+solid_infill_speed = 142
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:51:26
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:35:51
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 128
+infill_speed = 119
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.3
-max_print_speed = 128
-max_volumetric_speed = 27
+max_print_speed = 119
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.8
-solid_infill_speed = 112
+solid_infill_speed = 104
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:51:23
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:36:19
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 128
+infill_speed = 119
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.3
-max_print_speed = 128
-max_volumetric_speed = 27
+max_print_speed = 119
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1
-solid_infill_speed = 90
+solid_infill_speed = 83
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:20:23
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:36:41
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 128
+infill_speed = 119
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.3
-max_print_speed = 128
-max_volumetric_speed = 27
+max_print_speed = 119
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 75
+solid_infill_speed = 69
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:39:07
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:35:17
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 128
+infill_speed = 119
 inherits = 0.30mm QUALITY 0.6 nozzle MK3
 interface_shells = 0
 layer_height = 0.3
-max_print_speed = 128
-max_volumetric_speed = 30
+max_print_speed = 119
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.7
-solid_infill_speed = 128
+solid_infill_speed = 119
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:51:17
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:34:10
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 110
+infill_speed = 102
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
 layer_height = 0.35
-max_print_speed = 110
-max_volumetric_speed = 27
+max_print_speed = 102
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.8
-solid_infill_speed = 96
+solid_infill_speed = 89
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:51:13
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:34:31
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 110
+infill_speed = 102
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
 layer_height = 0.35
-max_print_speed = 110
-max_volumetric_speed = 27
+max_print_speed = 102
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1
-solid_infill_speed = 77
+solid_infill_speed = 69
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:31:49
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:34:50
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 110
+infill_speed = 102
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
 layer_height = 0.35
-max_print_speed = 110
-max_volumetric_speed = 27
+max_print_speed = 102
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 64
+solid_infill_speed = 59
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 00:53:57
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:33:20
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 110
+infill_speed = 102
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.35
-max_print_speed = 110
-max_volumetric_speed = 30
+max_print_speed = 102
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.7
-solid_infill_speed = 110
+solid_infill_speed = 102
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:51:08
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:31:05
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 96
+infill_speed = 89
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
 layer_height = 0.4
-max_print_speed = 96
-max_volumetric_speed = 27
+max_print_speed = 89
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:51:04
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:31:51
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 96
+infill_speed = 89
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
 layer_height = 0.4
-max_print_speed = 96
-max_volumetric_speed = 27
+max_print_speed = 89
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1
-solid_infill_speed = 67
+solid_infill_speed = 62
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:33:23
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:32:32
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 96
+infill_speed = 89
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
 layer_height = 0.4
-max_print_speed = 96
-max_volumetric_speed = 27
+max_print_speed = 89
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 56
+solid_infill_speed = 52
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:40:14
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:30:14
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 96
+infill_speed = 89
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.4
-max_print_speed = 96
-max_volumetric_speed = 30
+max_print_speed = 89
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.7
-solid_infill_speed = 96
+solid_infill_speed = 89
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:50:54
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:29:24
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 86
+infill_speed = 79
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion
 interface_shells = 0
 layer_height = 0.45
-max_print_speed = 86
-max_volumetric_speed = 27
+max_print_speed = 79
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.8
-solid_infill_speed = 74
+solid_infill_speed = 69
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:50:50
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:29:17
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 86
+infill_speed = 79
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
 interface_shells = 0
 layer_height = 0.45
-max_print_speed = 86
-max_volumetric_speed = 27
+max_print_speed = 79
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1
-solid_infill_speed = 50
+solid_infill_speed = 55
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:22:01
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:29:42
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 86
+infill_speed = 79
 inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
 layer_height = 0.45
-max_print_speed = 86
-max_volumetric_speed = 27
+max_print_speed = 79
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -54,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 49
+perimeter_speed = 46
 perimeters = 1
 post_process = 
 print_settings_id = 
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 49
+solid_infill_speed = 46
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -98,7 +98,7 @@ thin_walls = 0
 threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1.2
-top_solid_infill_speed = 49
+top_solid_infill_speed = 46
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:50:18
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:29:28
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -39,12 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 86
+infill_speed = 79
 inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.45
-max_print_speed = 86
-max_volumetric_speed = 30
+max_print_speed = 79
+max_volumetric_speed = 25
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -71,7 +71,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.7
-solid_infill_speed = 86
+solid_infill_speed = 79
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0