Enable LA, set your own value on filament tab

PrusaSlicer/filament/FILAFLEX 82A Original.ini

@@ -1,8 +1,10 @@
-# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-13 at 06:00:30
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:42:08
 bed_temperature = 0
 bridge_fan_speed = 100
 compatible_printers = 
 compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1
+compatible_prints = 
+compatible_prints_condition = 
 cooling = 1
 disable_fan_first_layers = 2
 end_filament_gcode = "; Filament-specific end gcode"
@@ -10,18 +12,26 @@ extrusion_multiplier = 1.1
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_colour = #00CA0A
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
 filament_cost = 35
 filament_density = 1.2
 filament_diameter = 1.75
+filament_load_time = 0
 filament_loading_speed = 28
+filament_loading_speed_start = 3
 filament_max_volumetric_speed = 1.5
+filament_minimal_purge_on_wipe_tower = 15
 filament_notes = "FILAFLEX 82A"
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
 filament_type = FLEX
+filament_unload_time = 0
 filament_unloading_speed = 90
+filament_unloading_speed_start = 100
 first_layer_bed_temperature = 0
 first_layer_temperature = 220
 inherits = 
@@ -29,5 +39,5 @@ max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 20
 slowdown_below_layer_time = 5
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}10{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}10{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
 temperature = 215

PrusaSlicer/filament/FILAFLEX 95A.ini

@@ -1,8 +1,10 @@
-# generated by Slic3r Prusa Edition 1.39.2+win64 on 2018-06-06 at 18:35:48
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:42:11
 bed_temperature = 0
 bridge_fan_speed = 100
 compatible_printers = 
 compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1
+compatible_prints = 
+compatible_prints_condition = 
 cooling = 1
 disable_fan_first_layers = 2
 end_filament_gcode = "; Filament-specific end gcode"
@@ -10,19 +12,32 @@ extrusion_multiplier = 1.15
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_colour = #00CA0A
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
 filament_cost = 35
 filament_density = 1.15
 filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
 filament_max_volumetric_speed = 1.5
+filament_minimal_purge_on_wipe_tower = 15
 filament_notes = "FILAFLEX 95A"
-filament_settings_id = 
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
 filament_soluble = 0
+filament_toolchange_delay = 0
 filament_type = FLEX
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
 first_layer_bed_temperature = 0
 first_layer_temperature = 235
+inherits = 
 max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 20
 slowdown_below_layer_time = 5
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}10{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}10{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
 temperature = 228

PrusaSlicer/filament/Generic ABS 240º Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:36:23
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:41:26
 bed_temperature = 115
 bridge_fan_speed = 30
 compatible_printers = 
@@ -39,5 +39,5 @@ max_fan_speed = 30
 min_fan_speed = 30
 min_print_speed = 5
 slowdown_below_layer_time = 25
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}15{else}30{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}15{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}30{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
 temperature = 240

PrusaSlicer/filament/Generic ABS 255º Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:37:29
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:41:30
 bed_temperature = 115
 bridge_fan_speed = 30
 compatible_printers = 
@@ -39,5 +39,5 @@ max_fan_speed = 30
 min_fan_speed = 30
 min_print_speed = 5
 slowdown_below_layer_time = 25
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}15{else}30{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}15{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}30{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
 temperature = 255

PrusaSlicer/filament/Generic PET Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:30:01
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:41:03
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -39,5 +39,5 @@ max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 15
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}22{else}45{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
 temperature = 240

PrusaSlicer/filament/Generic PLA Volcano.ini

@@ -1,8 +1,10 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-10-17 at 19:12:37
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:38:08
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+compatible_prints = 
+compatible_prints_condition = 
 cooling = 1
 disable_fan_first_layers = 1
 end_filament_gcode = "; Filament-specific end gcode"
@@ -14,7 +16,7 @@ filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
 filament_cooling_moves = 4
 filament_cost = 19
-filament_density = 1.25
+filament_density = 1.24
 filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
@@ -37,5 +39,5 @@ max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 10
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}18{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}30{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
 temperature = 210

PrusaSlicer/filament/HDGlass PETG Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:30:22
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:40:44
 bed_temperature = 75
 bridge_fan_speed = 50
 compatible_printers = 
@@ -39,5 +39,5 @@ max_fan_speed = 80
 min_fan_speed = 50
 min_print_speed = 5
 slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}22{else}45{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
 temperature = 220

PrusaSlicer/filament/PrimaSELECT PETG Volcano.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.42.0-beta2+win64 on 2019-05-06 at 20:38:39
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:40:40
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -39,5 +39,5 @@ max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 5
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}22{else}45{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
 temperature = 225

PrusaSlicer/filament/Prusament PETG 0.6 nozzle Volcano.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.42.0-beta2+win64 on 2019-04-23 at 15:14:23
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:40:33
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -39,5 +39,5 @@ max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 15
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}22{else}45{endif} ; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
 temperature = 250

PrusaSlicer/print/0.06mm 0.6 nozzle MK3 Volcano.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-24 at 15:50:07
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:22:01
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano.ini

@@ -9,7 +9,7 @@ bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1

PrusaSlicer/printer/Creality Ender-3 DirectDrive Volcano 0.6 Nozzle + BLTouch RECALL.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:46:51
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:27:49
 bed_shape = 0x0,220x0,220x220,0x220
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
 between_objects_gcode = 
@@ -39,7 +39,7 @@ nozzle_diameter = 0.6
 parking_pos_retraction = 92
 print_host = 192.168.1.35
 printer_model = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_VOLCANO\nPRINTER_HAS_DIRECT_DRIVE\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\nMAX_VOLUMETRIC_25\nMAX_SPEED_85
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_FULLMODEL_ENDER3_DD_06\nPRINTER_HAS_VOLCANO\nPRINTER_HAS_DIRECT_DRIVE\nMAX_VOLUMETRIC_25
 printer_settings_id = 
 printer_technology = FFF
 printer_variant = 

PrusaSlicer/printer/Creality Ender-3 DirectDrive Volcano 0.6 Nozzle + BLTouch.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:46:27
+# generated by PrusaSlicer 2.0.0+win64 on 2019-06-04 at 01:27:44
 bed_shape = 0x0,220x0,220x220,0x220
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
 between_objects_gcode = 
@@ -23,8 +23,8 @@ machine_max_acceleration_x = 1000,500
 machine_max_acceleration_y = 1000,500
 machine_max_acceleration_z = 100,100
 machine_max_feedrate_e = 120,50
-machine_max_feedrate_x = 200,200
-machine_max_feedrate_y = 200,200
+machine_max_feedrate_x = 500,200
+machine_max_feedrate_y = 500,200
 machine_max_feedrate_z = 15,10
 machine_max_jerk_e = 5,5
 machine_max_jerk_x = 10,10
@@ -39,7 +39,7 @@ nozzle_diameter = 0.6
 parking_pos_retraction = 92
 print_host = 192.168.1.35
 printer_model = 
-printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_VOLCANO\nPRINTER_HAS_DIRECT_DRIVE\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\nMAX_VOLUMETRIC_25\nMAX_SPEED_85
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_FULLMODEL_ENDER3_DD_06\nPRINTER_HAS_VOLCANO\nPRINTER_HAS_DIRECT_DRIVE\nMAX_VOLUMETRIC_25
 printer_settings_id = 
 printer_technology = FFF
 printer_variant =