Add more profiles and 0.6mm Nozzle with direct drive

Slic3rPE/print/0.04mm ULTRA DETAIL Ender3.ini

@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.45
 fill_angle = 45
 fill_density = 25%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.45
 first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 20
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 30
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 20
 top_solid_layers = 25
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.05mm Ender3 Volcano.ini

@@ -1,7 +1,7 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:57:57
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 12
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.84
 first_layer_height = 0.4
 first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.9
 perimeter_speed = 30
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 30
 top_solid_layers = 20
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.06mm 0.6 nozzle MK3 Volcano.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-10-28 at 03:45:50
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 8
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 25
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 100
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.06
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 30
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 100
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 30
+top_solid_layers = 14
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.08mm VERY DETAIL Ender3.ini

@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.45
 fill_angle = 45
 fill_density = 25%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.45
 first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 20
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 30
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 30
 top_solid_layers = 12
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.10mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:09:56
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.2
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1.2
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 200
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.2
+solid_infill_speed = 200
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 9
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.10mm 0.6 nozzle MK3 Volcano.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-10-28 at 03:48:28
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 200
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 200
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 10
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.10mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:27:21
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 7
+bridge_acceleration = 1500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 1500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.7
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.7
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1500
+first_layer_extrusion_width = 1.7
+first_layer_height = 0.4
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 120
+inherits = 
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 110
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1.7
+perimeter_speed = 45
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.7
+solid_infill_speed = 110
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 1.7
+top_solid_infill_speed = 45
+top_solid_layers = 10
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.10mm Ender3 Volcano.ini

@@ -1,7 +1,7 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:58:02
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 7
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.84
 first_layer_height = 0.4
-first_layer_speed = 25
+first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.9
 perimeter_speed = 45
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 10
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.12mm DETAIL Ender3.ini

@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.45
 first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 20
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 45
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 8
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.15mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:10:05
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.2
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1.2
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 200
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.2
+solid_infill_speed = 166
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 6
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.15mm 0.6 nozzle MK3 Volcano.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:24:08
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 200
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 200
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 6
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.15mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:03:17
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 5
+bridge_acceleration = 1500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 1500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.7
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.7
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1500
+first_layer_extrusion_width = 1.7
+first_layer_height = 0.4
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 120
+inherits = 
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 133
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1.7
+perimeter_speed = 45
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.7
+solid_infill_speed = 71
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 1.7
+top_solid_infill_speed = 45
+top_solid_layers = 7
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.15mm Ender3 Volcano.ini

@@ -1,7 +1,7 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:48:25
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 5
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.84
 first_layer_height = 0.4
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.9
 perimeter_speed = 45
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 7
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.16mm OPTIMAL Ender3.ini

@@ -1,7 +1,7 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:49:15
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 6
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.45
 first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 45
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 6
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.20mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:10:09
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.2
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1.2
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 200
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.2
+solid_infill_speed = 125
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.20mm 0.6 nozzle MK3 Volcano.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:26:46
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 200
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 200
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.20mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:12:07
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 4
+bridge_acceleration = 1500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 1500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.7
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.7
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1500
+first_layer_extrusion_width = 1.7
+first_layer_height = 0.4
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 100
+inherits = 
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 55
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1.7
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.7
+solid_infill_speed = 55
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 1.7
+top_solid_infill_speed = 45
+top_solid_layers = 5
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.20mm Ender3 Volcano.ini

@@ -1,7 +1,7 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:44:57
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-20 at 04:19:38
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 4
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.84
 first_layer_height = 0.4
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.9
 perimeter_speed = 45
@@ -62,6 +62,7 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
@@ -97,7 +98,7 @@ threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 5
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.20mm FAST 0.8 nozzle MK3.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.39.1-prusa3d-win64 on 2018-05-07 at 06:12:19
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 15
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.8
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.9
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 56
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 56
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 10
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 56
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 50
+top_solid_layers = 5
+travel_speed = 250
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.20mm NORMAL Ender3.ini

@@ -1,7 +1,7 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:47:10
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 5
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.45
 first_layer_height = 0.2
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 45
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 5
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.24mm FAST Ender3.ini

@@ -1,7 +1,7 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:48:33
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 4
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.45
 first_layer_height = 0.2
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 45
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 4
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.25mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:10:14
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.2
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1.2
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 166
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.25
+max_print_speed = 166
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.2
+solid_infill_speed = 100
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.25mm 0.6 nozzle MK3 Volcano.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:26:31
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 166
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.25
+max_print_speed = 166
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 166
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.25mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:47:06
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 4
+bridge_acceleration = 1500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 1500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.7
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.7
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1500
+first_layer_extrusion_width = 1.7
+first_layer_height = 0.4
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 80
+inherits = 
+interface_shells = 0
+layer_height = 0.25
+max_print_speed = 43
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1.7
+perimeter_speed = 43
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.7
+solid_infill_speed = 43
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 1.7
+top_solid_infill_speed = 43
+top_solid_layers = 5
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.25mm Ender3 Volcano.ini

@@ -1,7 +1,7 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:42:52
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 4
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.84
 first_layer_height = 0.4
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.9
 perimeter_speed = 45
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 5
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.25mm VERY FAST MK3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.0+win64 on 2018-06-14 at 19:47:59
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 88
+inherits = 0.20mm FAST MK3
+interface_shells = 0
+layer_height = 0.25
+max_print_speed = 88
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 10
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 88
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.28mm VERY FAST Ender3.ini

@@ -1,7 +1,7 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:50:50
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 4
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.45
 first_layer_height = 0.2
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 45
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 4
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:10:18
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.2
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1.2
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 138
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.3
+max_print_speed = 138
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.2
+solid_infill_speed = 83
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.30mm 0.6 nozzle MK3 Volcano.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:27:22
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 138
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.3
+max_print_speed = 138
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 138
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.30mm 0.6 nozzle MK3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-01 at 17:21:43
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 50
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.3
+max_print_speed = 50
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.30mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:27:34
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 3
+bridge_acceleration = 1500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 1500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.7
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.7
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1500
+first_layer_extrusion_width = 1.7
+first_layer_height = 0.4
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 67
+inherits = 
+interface_shells = 0
+layer_height = 0.3
+max_print_speed = 45
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1.7
+perimeter_speed = 36
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.7
+solid_infill_speed = 36
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 1.7
+top_solid_infill_speed = 36
+top_solid_layers = 3
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.30mm Ender3 Volcano.ini

@@ -1,7 +1,7 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:42:47
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 3
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.84
 first_layer_height = 0.4
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.9
 perimeter_speed = 45
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 3
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.30mm FAST 0.8 nozzle MK3.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.39.1-prusa3d-win64 on 2018-05-07 at 06:15:09
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 15
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.8
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.9
+first_layer_height = 0.3
+first_layer_speed = 30
+gap_fill_speed = 37
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 37
+interface_shells = 0
+layer_height = 0.3
+max_print_speed = 37
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 10
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 37
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 37
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 37
+top_solid_layers = 3
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.30mm ULTRA FAST MK3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.0+win64 on 2018-06-14 at 19:50:01
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 74
+inherits = 0.20mm FAST MK3
+interface_shells = 0
+layer_height = 0.3
+max_print_speed = 74
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 10
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 74
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.32mm ULTRA FAST Ender3.ini

@@ -1,7 +1,7 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:52:49
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 3
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.45
 first_layer_height = 0.2
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.45
 perimeter_speed = 45
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 3
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.35mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:10:23
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.2
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1.2
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 118
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.35
+max_print_speed = 118
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.2
+solid_infill_speed = 71
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.35mm 0.6 nozzle MK3 Volcano.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:27:53
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 118
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.35
+max_print_speed = 118
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 118
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.35mm 0.6 nozzle MK3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-01 at 17:21:38
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 40
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.35
+max_print_speed = 50
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 43
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 43
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 47
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.35mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:41:40
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 3
+bridge_acceleration = 1500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 1500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.7
+external_perimeter_speed = 31
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.7
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1500
+first_layer_extrusion_width = 1.7
+first_layer_height = 0.4
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 58
+inherits = 
+interface_shells = 0
+layer_height = 0.35
+max_print_speed = 64
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1.7
+perimeter_speed = 31
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.7
+solid_infill_speed = 31
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 1.7
+top_solid_infill_speed = 31
+top_solid_layers = 3
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.35mm Ender3 Volcano.ini

@@ -1,7 +1,7 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:41:27
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 3
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0.1
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.84
 first_layer_height = 0.4
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.9
 perimeter_speed = 45
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 3
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.40mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:10:27
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.2
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1.2
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 104
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.4
+max_print_speed = 104
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.2
+solid_infill_speed = 62
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.40mm 0.6 nozzle MK3 Volcano.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-21 at 02:29:36
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 104
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.4
+max_print_speed = 104
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 104
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.40mm 0.6 nozzle MK3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-01 at 17:33:55
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 2
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 38
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 35
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.4
+max_print_speed = 50
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 38
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 38
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 41
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.40mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:28:39
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 3
+bridge_acceleration = 1500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 27
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 1500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.7
+external_perimeter_speed = 27
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.7
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1500
+first_layer_extrusion_width = 1.7
+first_layer_height = 0.4
+first_layer_speed = 20
+gap_fill_speed = 27
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 50
+inherits = 
+interface_shells = 0
+layer_height = 0.4
+max_print_speed = 50
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1.7
+perimeter_speed = 27
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.7
+solid_infill_speed = 27
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 1.7
+top_solid_infill_speed = 27
+top_solid_layers = 3
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.40mm Ender3 Volcano.ini

@@ -1,7 +1,7 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:41:33
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-20 at 04:06:12
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 3
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0.1
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.84
 first_layer_height = 0.4
-first_layer_speed = 30
-gap_fill_speed = 40
+first_layer_speed = 20
+gap_fill_speed = 30
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.9
 perimeter_speed = 45
@@ -62,6 +62,7 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
@@ -97,7 +98,7 @@ threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 3
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.40mm FAST 0.8 nozzle MK3.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.39.1-prusa3d-win64 on 2018-05-07 at 06:14:39
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 15
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.8
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 28
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.9
+first_layer_height = 0.4
+first_layer_speed = 28
+gap_fill_speed = 28
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 28
+interface_shells = 0
+layer_height = 0.4
+max_print_speed = 28
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 10
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 28
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 28
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 28
+top_solid_layers = 3
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.45mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-17 at 19:28:49
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.2
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.2
+fill_angle = 45
+fill_density = 15%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1.2
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 92
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.45
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.2
+solid_infill_speed = 52
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 1.2
+top_solid_infill_speed = 50
+top_solid_layers = 2
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.45mm 0.6 nozzle MK3 Volcano.ini

@@ -0,0 +1,108 @@
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:29:38
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 92
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.45
+max_print_speed = 92
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 92
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 2
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.45mm 0.6 nozzle MK3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-01 at 17:33:34
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 2
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 36
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 10%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 33
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 31
+inherits = 0.20mm FAST 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.45
+max_print_speed = 50
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 33
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 34
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 36
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.45mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:39:00
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 2
+bridge_acceleration = 1500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 1500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.7
+external_perimeter_speed = 24
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.7
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1500
+first_layer_extrusion_width = 1.7
+first_layer_height = 0.4
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 45
+inherits = 
+interface_shells = 0
+layer_height = 0.45
+max_print_speed = 50
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1.7
+perimeter_speed = 24
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.7
+solid_infill_speed = 24
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 24
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 1.7
+top_solid_infill_speed = 24
+top_solid_layers = 2
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.45mm Ender3 Volcano.ini

@@ -1,7 +1,7 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:41:37
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 03:58:26
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 2
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0.1
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.84
 first_layer_height = 0.4
-first_layer_speed = 30
-gap_fill_speed = 40
+first_layer_speed = 20
+gap_fill_speed = 30
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.9
 perimeter_speed = 45
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 2
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.50mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:37:18
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 2
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 21
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.7
+external_perimeter_speed = 21
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.7
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 1.7
+first_layer_height = 0.4
+first_layer_speed = 20
+gap_fill_speed = 21
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 40
+inherits = 
+interface_shells = 0
+layer_height = 0.5
+max_print_speed = 45
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 1.7
+perimeter_speed = 21
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.7
+solid_infill_speed = 21
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 1.7
+top_solid_infill_speed = 21
+top_solid_layers = 2
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.50mm Ender3 Volcano.ini

@@ -1,7 +1,7 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:36:52
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 2
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0.1
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.84
 first_layer_height = 0.4
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.9
 perimeter_speed = 40
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 45
 top_solid_layers = 2
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.50mm FAST 0.8 nozzle MK3.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.39.1-prusa3d-win64 on 2018-05-07 at 06:16:28
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 2
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 15
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.8
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 22
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.9
+first_layer_height = 0.5
+first_layer_speed = 22
+gap_fill_speed = 22
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 22
+interface_shells = 0
+layer_height = 0.5
+max_print_speed = 22
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 10
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 22
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 22
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 36
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 22
+top_solid_layers = 2
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.55mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 04:35:42
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 2
+bridge_acceleration = 1500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 1500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.7
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.7
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1500
+first_layer_extrusion_width = 1.7
+first_layer_height = 0.4
+first_layer_speed = 20
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 36
+inherits = 
+interface_shells = 0
+layer_height = 0.55
+max_print_speed = 20
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1.7
+perimeter_speed = 20
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.7
+solid_infill_speed = 20
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 1.7
+top_solid_infill_speed = 20
+top_solid_layers = 2
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.55mm Ender3 Volcano.ini

@@ -1,7 +1,7 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:33:28
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 2
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0.1
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.84
 first_layer_height = 0.4
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.9
 perimeter_speed = 36
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 41
 top_solid_layers = 2
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.60mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:09:16
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 2
+bridge_acceleration = 1500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 18
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 1500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.7
+external_perimeter_speed = 18
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.7
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1500
+first_layer_extrusion_width = 1.7
+first_layer_height = 0.4
+first_layer_speed = 18
+gap_fill_speed = 18
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 33
+inherits = 
+interface_shells = 0
+layer_height = 0.6
+max_print_speed = 45
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1.7
+perimeter_speed = 18
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 10
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.7
+solid_infill_speed = 18
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 43
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 1.7
+top_solid_infill_speed = 18
+top_solid_layers = 2
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.60mm Ender3 Volcano.ini

@@ -1,7 +1,7 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:36:25
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:09:22
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 2
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0.1
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.84
 first_layer_height = 0.4
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.9
 perimeter_speed = 33
@@ -87,7 +87,7 @@ support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
-support_material_speed = 45
+support_material_speed = 43
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 36
 top_solid_layers = 2
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0

Slic3rPE/print/0.60mm FAST 0.8 nozzle MK3.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.39.1-prusa3d-win64 on 2018-05-08 at 15:29:05
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 2
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 15
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.8
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 19
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.9
+first_layer_height = 0.6
+first_layer_speed = 19
+gap_fill_speed = 19
+gcode_comments = 0
+infill_acceleration = 1500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 19
+interface_shells = 0
+layer_height = 0.6
+max_print_speed = 19
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 10
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 19
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 19
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 30
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 19
+top_solid_layers = 2
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.65mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:08:47
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 2
+bridge_acceleration = 1500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 16
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 1500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 1.7
+external_perimeter_speed = 16
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.7
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 1500
+first_layer_extrusion_width = 1.7
+first_layer_height = 0.4
+first_layer_speed = 16
+gap_fill_speed = 16
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 30
+inherits = 
+interface_shells = 0
+layer_height = 0.65
+max_print_speed = 16
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1.7
+perimeter_speed = 16
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 10
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.7
+solid_infill_speed = 16
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 40
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 1.7
+top_solid_infill_speed = 16
+top_solid_layers = 2
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.65mm Ender3 Volcano.ini

@@ -1,7 +1,7 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:31:35
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:08:52
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 2
-bridge_acceleration = 500
+bridge_acceleration = 1500
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -10,7 +10,7 @@ clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 complete_objects = 0
-default_acceleration = 500
+default_acceleration = 1500
 dont_support_bridges = 1
 elefant_foot_compensation = 0.1
 ensure_vertical_shell_thickness = 1
@@ -25,13 +25,13 @@ extrusion_width = 0.9
 fill_angle = 45
 fill_density = 20%
 fill_pattern = grid
-first_layer_acceleration = 500
+first_layer_acceleration = 1500
 first_layer_extrusion_width = 0.84
 first_layer_height = 0.4
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 30
 gcode_comments = 0
-infill_acceleration = 500
+infill_acceleration = 2000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.9
@@ -52,7 +52,7 @@ only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
 overhangs = 0
-perimeter_acceleration = 500
+perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.9
 perimeter_speed = 30
@@ -87,7 +87,7 @@ support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
-support_material_speed = 45
+support_material_speed = 40
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
@@ -97,7 +97,7 @@ threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 30
 top_solid_layers = 2
-travel_speed = 170
+travel_speed = 200
 wipe_tower = 0
 wipe_tower_bridging = 10
 wipe_tower_rotation_angle = 0