Improve ABS auto cooling and add test objects

README.md

@@ -22,7 +22,10 @@ Modify at your needs.
 3. Close Slic3rPE
 4. Open "%AppData%\Slic3rPE\", if not exists try: "C:\Users\Public\Documents\Prusa3D\Slic3r settings xxxx",
 5. Copy GitHub Slic3rPE subfolders ("printer", "filament", "print") to the folder above
-6. Done
+7. Open Slic3rPE and check if profiles are there
+8. To clean up interface remove profiles that you will not use: Printers you will not use (OPTIONAL)
+9. Go under printer and use your current values for your printer, like max Z, limits, start gcodes or other things you may need to tune
+10. Do a simple test print
 
 ## 2. Hardware
 

Slic3rPE/filament/FilaFarm ABS Volcano.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:38:08
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:31:33
 bed_temperature = 115
 bridge_fan_speed = 30
 compatible_printers = 
@@ -10,18 +10,26 @@ extrusion_multiplier = 1.04
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_colour = #3A80CA
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
 filament_cost = 19
 filament_density = 1.04
 filament_diameter = 1.75
+filament_load_time = 0
 filament_loading_speed = 28
+filament_loading_speed_start = 3
 filament_max_volumetric_speed = 32
+filament_minimal_purge_on_wipe_tower = 15
 filament_notes = "FilaFarm ABS"
 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
 filament_type = ABS
+filament_unload_time = 0
 filament_unloading_speed = 90
+filament_unloading_speed_start = 100
 first_layer_bed_temperature = 110
 first_layer_temperature = 250
 inherits = Prusa ABS

Slic3rPE/filament/Generic ABS Volcano.ini

@@ -1,31 +1,39 @@
-# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-15 at 02:30:39
-bed_temperature = 110
+# generated by Slic3r Prusa Edition 1.41.2+win64 on 2018-12-11 at 18:49:32
+bed_temperature = 115
 bridge_fan_speed = 30
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
-cooling = 0
+cooling = 1
 disable_fan_first_layers = 3
 end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 0
-fan_below_layer_time = 60
+fan_below_layer_time = 20
 filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 16
+filament_density = 1.04
 filament_diameter = 1.75
+filament_load_time = 0
 filament_loading_speed = 28
+filament_loading_speed_start = 3
 filament_max_volumetric_speed = 32
+filament_minimal_purge_on_wipe_tower = 15
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
 filament_type = ABS
+filament_unload_time = 0
 filament_unloading_speed = 90
+filament_unloading_speed_start = 100
 first_layer_bed_temperature = 110
 first_layer_temperature = 255
 inherits = Generic ABS
-max_fan_speed = 25
+max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
 slowdown_below_layer_time = 25

Slic3rPE/filament/Generic PET Volcano.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.40.0+win64 on 2018-06-18 at 18:46:12
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:32:03
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -10,18 +10,26 @@ extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 20
 filament_colour = #FF8000
-filament_cost = 0
-filament_density = 0
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 25
+filament_density = 1.2
 filament_diameter = 1.75
+filament_load_time = 0
 filament_loading_speed = 28
+filament_loading_speed_start = 3
 filament_max_volumetric_speed = 24
+filament_minimal_purge_on_wipe_tower = 15
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
 filament_type = PET
+filament_unload_time = 0
 filament_unloading_speed = 90
+filament_unloading_speed_start = 100
 first_layer_bed_temperature = 85
 first_layer_temperature = 230
 inherits = Generic PET

Slic3rPE/filament/Generic PLA Volcano.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-13 at 19:53:52
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-10-17 at 19:12:37
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -10,24 +10,32 @@ extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 100
 filament_colour = #FF3232
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
 filament_cost = 19
 filament_density = 1.25
 filament_diameter = 1.75
+filament_load_time = 0
 filament_loading_speed = 28
+filament_loading_speed_start = 3
 filament_max_volumetric_speed = 28
+filament_minimal_purge_on_wipe_tower = 15
 filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
 filament_type = PLA
+filament_unload_time = 0
 filament_unloading_speed = 90
+filament_unloading_speed_start = 100
 first_layer_bed_temperature = 60
 first_layer_temperature = 215
 inherits = Generic PLA
 max_fan_speed = 100
 min_fan_speed = 100
-min_print_speed = 15
+min_print_speed = 10
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
 temperature = 210

Slic3rPE/filament/HDGlass PETG.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:33:24
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:32:15
 bed_temperature = 75
 bridge_fan_speed = 50
 compatible_printers = 
@@ -10,18 +10,26 @@ extrusion_multiplier = 1.02
 fan_always_on = 1
 fan_below_layer_time = 20
 filament_colour = #FF8000
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
 filament_cost = 39
 filament_density = 1.27
 filament_diameter = 1.75
+filament_load_time = 0
 filament_loading_speed = 28
+filament_loading_speed_start = 3
 filament_max_volumetric_speed = 24
+filament_minimal_purge_on_wipe_tower = 15
 filament_notes = HDGlass
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
 filament_type = PET
+filament_unload_time = 0
 filament_unloading_speed = 90
+filament_unloading_speed_start = 100
 first_layer_bed_temperature = 70
 first_layer_temperature = 220
 inherits = Prusa PET

Slic3rPE/filament/SAKATA ABS Volcano.ini

@@ -1,31 +1,39 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:37:04
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-10-14 at 04:50:56
 bed_temperature = 115
 bridge_fan_speed = 30
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
-cooling = 0
+cooling = 1
 disable_fan_first_layers = 3
 end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1.01
 fan_always_on = 0
-fan_below_layer_time = 60
+fan_below_layer_time = 20
 filament_colour = #3A80CA
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
 filament_cost = 19
 filament_density = 1.04
 filament_diameter = 1.75
+filament_load_time = 0
 filament_loading_speed = 28
+filament_loading_speed_start = 3
 filament_max_volumetric_speed = 32
+filament_minimal_purge_on_wipe_tower = 15
 filament_notes = "SAKATA ABS"
 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
 filament_type = ABS
+filament_unload_time = 0
 filament_unloading_speed = 90
+filament_unloading_speed_start = 100
 first_layer_bed_temperature = 110
 first_layer_temperature = 245
 inherits = Prusa ABS
-max_fan_speed = 25
+max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
 slowdown_below_layer_time = 25

Slic3rPE/filament/SUNLU ABS Volcano.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:34:08
+# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-10-14 at 04:50:38
 bed_temperature = 115
 bridge_fan_speed = 30
 compatible_printers = 
@@ -8,24 +8,32 @@ disable_fan_first_layers = 3
 end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 0
-fan_below_layer_time = 60
+fan_below_layer_time = 20
 filament_colour = #3A80CA
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
 filament_cost = 19
 filament_density = 1.04
 filament_diameter = 1.75
+filament_load_time = 0
 filament_loading_speed = 28
+filament_loading_speed_start = 3
 filament_max_volumetric_speed = 32
+filament_minimal_purge_on_wipe_tower = 15
 filament_notes = "SUNLU ABS"
 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
 filament_type = ABS
+filament_unload_time = 0
 filament_unloading_speed = 90
+filament_unloading_speed_start = 100
 first_layer_bed_temperature = 110
 first_layer_temperature = 240
 inherits = Prusa ABS
-max_fan_speed = 25
+max_fan_speed = 30
 min_fan_speed = 10
 min_print_speed = 5
 slowdown_below_layer_time = 25