Home Explore Help
Sign In
3DPrinting
/
Tips
2
0
Fork 0
Files Issues 0 Pull Requests 0 Wiki
Branch: master
Branches Tags
Tips
/
firmwares
/
marlin
/
Touch Mi - Marlin-bugfix-1.1.x
/
Marlin
/
pins_TRIGORILLA_14.h

pins_TRIGORILLA_14.h 2.3 KB
Permalink History Raw

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081 
  1. /**
    2. 

  2.  * Marlin 3D Printer Firmware
    3. 

  3.  * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
    4. 

  4.  *
    5. 

  5.  * Based on Sprinter and grbl.
    6. 

  6.  * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
    7. 

  7.  *
    8. 

  8.  * This program is free software: you can redistribute it and/or modify
    9. 

  9.  * it under the terms of the GNU General Public License as published by
    10. 

  10.  * the Free Software Foundation, either version 3 of the License, or
    11. 

  11.  * (at your option) any later version.
    12. 

  12.  *
    13. 

  13.  * This program is distributed in the hope that it will be useful,
    14. 

  14.  * but WITHOUT ANY WARRANTY; without even the implied warranty of
    15. 

  15.  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    16. 

  16.  * GNU General Public License for more details.
    17. 

  17.  *
    18. 

  18.  * You should have received a copy of the GNU General Public License
    19. 

  19.  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
    20. 

  20.  *
    21. 

  21.  */
    22. 

  22. 

  23. /**
    24. 

  24.  * Arduino Mega with RAMPS v1.4 for Anycubic
    25. 

  25.  */
    26. 

  26. 

  27. #ifndef BOARD_NAME
    28. 

  28.   #define BOARD_NAME "Anycubic RAMPS 1.4"
    29. 

  29. #endif
    30. 

  30. 

  31. #define IS_RAMPS_EFB
    32. 

  32. 

  33. // FAN0 / D9  - Typically used for the part fan on Anycubic Delta devices
    34. 

  34. #define FAN_PIN 9
    35. 

  35. 

  36. // FAN1 / D7  - Typically unused, can be allocated as Case Fan
    37. 

  37. 

  38. // FAN2 / D44 - Typical Extruder Fan on Anycubic Delta devices
    39. 

  39. #define FAN2_PIN              44
    40. 

  40. #define ORIG_E0_AUTO_FAN_PIN  44
    41. 

  41. 

  42. #include "pins_RAMPS.h"
    43. 

  43. 

  44. // TODO 1.4 boards do have an E1 stepper driver. However the pin definitions
    45. 

  45. // from pins_RAMPS.h are incorrect for this board. e.g., Pin 44 is the Extruder fan.
    46. 

  46. #undef E1_STEP_PIN
    47. 

  47. #undef E1_DIR_PIN
    48. 

  48. #undef E1_ENABLE_PIN
    49. 

  49. #undef E1_CS_PIN
    50. 

  50. 

  51. //
    52. 

  52. // AnyCubic made the following changes to 1.1.0-RC8
    53. 

  53. // If these are appropriate for your LCD let us know.
    54. 

  54. //
    55. 

  55. #if 0 && ENABLED(ULTRA_LCD)
    56. 

  56. 

  57.   // LCD Display output pins
    58. 

  58.   #if ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
    59. 

  59.     #undef LCD_PINS_D6
    60. 

  60.     #define LCD_PINS_D6    57
    61. 

  61.   #endif
    62. 

  62. 

  63.   // LCD Display input pins
    64. 

  64.   #if ENABLED(NEWPANEL)
    65. 

  65.     #if ENABLED(VIKI2) || ENABLED(miniVIKI)
    66. 

  66.       #undef DOGLCD_A0
    67. 

  67.       #define DOGLCD_A0    23
    68. 

  68.     #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
    69. 

  69.       #undef BEEPER_PIN
    70. 

  70.       #define BEEPER_PIN   33
    71. 

  71.       #undef LCD_BACKLIGHT_PIN
    72. 

  72.       #define LCD_BACKLIGHT_PIN 67
    73. 

  73.     #endif
    74. 

  74.   #elif ENABLED(MINIPANEL)
    75. 

  75.     #undef BEEPER_PIN
    76. 

  76.     #define BEEPER_PIN     33
    77. 

  77.     #undef DOGLCD_A0
    78. 

  78.     #define DOGLCD_A0      42
    79. 

  79.   #endif
    80. 

  80. 

  81. #endif // ULTRA_LCD
    82.