| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687 |
- /**
- * Marlin 3D Printer Firmware
- * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- *
- */
- /**
- * Arduino Mega with RAMPS v1.4Plus, also known as 3DYMY version, pin assignments
- * The differences to the RAMPS v1.4 are:
- * - Swap heater E0 with E1
- * - Swap pins 8 and 10. Bed/Fan/Hotend as labeled on the board are on pins 8/9/10.
- * - Change pins 16->42, 17->44 and 29->53 used for display.
- *
- * Applies to the following boards:
- *
- * RAMPS_PLUS_EFB (Extruder, Fan, Bed)
- * RAMPS_PLUS_EEB (Extruder, Extruder, Bed)
- * RAMPS_PLUS_EFF (Extruder, Fan, Fan)
- * RAMPS_PLUS_EEF (Extruder, Extruder, Fan)
- * RAMPS_PLUS_SF (Spindle, Controller Fan)
- *
- */
- #if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
- #error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
- #endif
- #ifndef BOARD_NAME
- #define BOARD_NAME "RAMPS 1.4 Plus"
- #endif
- #define RAMPS_D8_PIN 10
- #define RAMPS_D10_PIN 8
- #include "pins_RAMPS.h"
- //
- // Steppers - Swap E0 / E1 on 3DYMY
- //
- #undef E0_STEP_PIN
- #undef E0_DIR_PIN
- #undef E0_ENABLE_PIN
- #undef E1_STEP_PIN
- #undef E1_DIR_PIN
- #undef E1_ENABLE_PIN
- #define E0_STEP_PIN 36
- #define E0_DIR_PIN 34
- #define E0_ENABLE_PIN 30
- #define E1_STEP_PIN 26
- #define E1_DIR_PIN 28
- #define E1_ENABLE_PIN 24
- #undef X_CS_PIN
- #undef Y_CS_PIN
- #undef Z_CS_PIN
- #undef E0_CS_PIN
- #undef E1_CS_PIN
- #if ENABLED(ULTRA_LCD) && DISABLED(REPRAPWORLD_GRAPHICAL_LCD) && (DISABLED(NEWPANEL) || DISABLED(PANEL_ONE)) && DISABLED(CR10_STOCKDISPLAY)
- #if DISABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)
- #undef LCD_PINS_RS
- #define LCD_PINS_RS 42 // 3DYMY boards pin 16 -> 42
- #undef LCD_PINS_ENABLE
- #define LCD_PINS_ENABLE 44 // 3DYMY boards pin 17 -> 44
- #endif
- #undef LCD_PINS_D7
- #define LCD_PINS_D7 53 // 3DYMY boards pin 29 -> 53
- #endif
|
