|
|
@@ -4,11 +4,12 @@
|
|
|
|
|
|
I use this one on my Ender 3 with a [Touch Mi](http://www.hotends.fr/fr/home/64-capteur-auto-leveling-touch-mi.html)
|
|
|
|
|
|
-`Configuration.h` and `Configuration_adv.h` are based on Hotends.fr docs with some more modifications. I used `Marling-bugfix-1.1.x` and not the sources provided by `hotends.fr`, so i don't have the Touch Mi custom menus.
|
|
|
+`Configuration.h` and `Configuration_adv.h` are based on Hotends.fr docs with some more modifications. I used `Marlin-bugfix-1.1.x` and not the sources provided by `hotends.fr`, so i don't have the Touch Mi custom menus.
|
|
|
|
|
|
-* `S_CURVE_ACCELERATION` is enabled (see https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained)
|
|
|
-* `PIDTEMPBED` is enabled
|
|
|
+* `S_CURVE_ACCELERATION` is enabled (see https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained)
|
|
|
+* `PIDTEMPBED` is enabled
|
|
|
* `RESTORE_LEVELING_AFTER_G28` is enabled (see [G29 ABL](http://marlinfw.org/docs/gcode/G029-abl.html) for details)
|
|
|
+* `ENABLE_LEVELING_FADE_HEIGHT` is enabled (see [Marlin issue #7562](https://github.com/MarlinFirmware/Marlin/issues/7562) for details)
|
|
|
* as I need moar `PROGMEM` and use[OctoPrint](https://octoprint.org/), `SDSUPPORT` is disabled but i can keep `DISABLE_M503` unused
|
|
|
* Step/mm, PIDs are feeded from my own values.
|
|
|
* `GRID_MAX_POINTS_X` & `GRID_MAX_POINTS_Y` are set to 5
|
|
|
@@ -24,4 +25,4 @@ I've modified the `*_PROBE_BED_POSITION` defines to use probe offsets
|
|
|
#define BACK_PROBE_BED_POSITION (Y_BED_SIZE + Y_PROBE_OFFSET_FROM_EXTRUDER - MIN_PROBE_EDGE)
|
|
|
```
|
|
|
|
|
|
-> NOTES : PID values are for my 0.4mm steel nozzle and borosillicate bed.
|
|
|
+> NOTES : PID values are for my 0.4mm steel nozzle and borosillicate bed. Ender 3 is mainly stock, the only hardware updates atm are dampers on all stepper and TLSmoothers on X,Y & Z.
|
