| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155 |
- # generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:14:57 UTC
- avoid_crossing_perimeters = 0
- avoid_crossing_perimeters_max_detour = 0
- bottom_fill_pattern = monotonic
- bottom_solid_layers = 4
- bottom_solid_min_thickness = 0.6
- bridge_acceleration = 1000
- bridge_angle = 0
- bridge_flow_ratio = 1
- bridge_speed = 25
- brim_separation = 0.1
- brim_type = outer_only
- brim_width = 0
- clip_multipart_objects = 1
- compatible_printers =
- compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
- complete_objects = 0
- default_acceleration = 1000
- dont_support_bridges = 1
- draft_shield = disabled
- elefant_foot_compensation = 0.2
- ensure_vertical_shell_thickness = 1
- external_perimeter_extrusion_width = 0.8
- external_perimeter_speed = 40
- external_perimeters_first = 0
- extra_perimeters = 0
- extruder_clearance_height = 25
- extruder_clearance_radius = 45
- extrusion_width = 0.8
- fill_angle = 45
- fill_density = 15%
- fill_pattern = gyroid
- first_layer_acceleration = 800
- first_layer_acceleration_over_raft = 0
- first_layer_extrusion_width = 0.8
- first_layer_height = 0.3
- first_layer_speed = 20
- first_layer_speed_over_raft = 30
- fuzzy_skin = none
- fuzzy_skin_point_dist = 0.8
- fuzzy_skin_thickness = 0.3
- gap_fill_enabled = 1
- gap_fill_speed = 40
- gcode_comments = 0
- gcode_label_objects = 1
- gcode_resolution = 0.0125
- gcode_substitutions =
- infill_acceleration = 1000
- infill_anchor = 2.5
- infill_anchor_max = 15
- infill_every_layers = 1
- infill_extruder = 1
- infill_extrusion_width = 0.7
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 25%
- infill_speed = 119
- inherits = 0.30mm 0.6 nozzle MK3 Volcano
- interface_shells = 0
- ironing = 0
- ironing_flowrate = 15%
- ironing_spacing = 0.1
- ironing_speed = 15
- ironing_type = top
- layer_height = 0.3
- max_print_speed = 119
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- max_volumetric_speed = 25
- min_bead_width = 85%
- min_feature_size = 25%
- min_skirt_length = 4
- mmu_segmented_region_max_width = 0
- notes =
- only_retract_when_crossing_perimeters = 0
- ooze_prevention = 0
- output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
- overhangs = 1
- perimeter_acceleration = 800
- perimeter_extruder = 1
- perimeter_extrusion_width = 0.8
- perimeter_generator = arachne
- perimeter_speed = 50
- perimeters = 2
- post_process =
- print_settings_id =
- raft_contact_distance = 0.25
- raft_expansion = 1.5
- raft_first_layer_density = 90%
- raft_first_layer_expansion = 3
- raft_layers = 0
- resolution = 0
- seam_position = nearest
- single_extruder_multi_material_priming = 0
- skirt_distance = 2
- skirt_height = 3
- skirts = 1
- slice_closing_radius = 0.049
- slicing_mode = regular
- small_perimeter_speed = 25
- solid_infill_below_area = 0
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- solid_infill_extrusion_width = 0.8
- solid_infill_speed = 104
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_angle = 0
- support_material_auto = 1
- support_material_bottom_contact_distance = 0
- support_material_bottom_interface_layers = 0
- support_material_buildplate_only = 1
- support_material_closing_radius = 2
- support_material_contact_distance = 0.30
- support_material_enforce_layers = 0
- support_material_extruder = 0
- support_material_extrusion_width = 0.55
- support_material_interface_contact_loops = 0
- support_material_interface_extruder = 0
- support_material_interface_layers = 2
- support_material_interface_pattern = rectilinear
- support_material_interface_spacing = 0.3
- support_material_interface_speed = 80%
- support_material_pattern = rectilinear
- support_material_spacing = 2
- support_material_speed = 50
- support_material_style = grid
- support_material_synchronize_layers = 0
- support_material_threshold = 50
- support_material_with_sheath = 0
- support_material_xy_spacing = 80%
- thick_bridges = 0
- thin_walls = 0
- threads = 16
- top_fill_pattern = monotonic
- top_infill_extrusion_width = 0.8
- top_solid_infill_speed = 50
- top_solid_layers = 4
- top_solid_min_thickness = 0.9
- travel_speed = 180
- travel_speed_z = 12
- wall_distribution_count = 1
- wall_transition_angle = 10
- wall_transition_filter_deviation = 25%
- wall_transition_length = 0.6
- wipe_tower = 1
- wipe_tower_bridging = 10
- wipe_tower_brim_width = 2
- wipe_tower_no_sparse_layers = 0
- wipe_tower_rotation_angle = 0
- wipe_tower_width = 60
- wipe_tower_x = 170
- wipe_tower_y = 125
- xy_size_compensation = 0
|
