| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122 |
- # generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 17:19:02 UTC
- avoid_crossing_perimeters = 1
- avoid_crossing_perimeters_max_detour = 0
- bottom_fill_pattern = monotonic
- bottom_solid_layers = 9
- bottom_solid_min_thickness = 0.5
- bridge_acceleration = 1000
- bridge_angle = 0
- bridge_flow_ratio = 0.8
- bridge_speed = 20
- brim_width = 0
- clip_multipart_objects = 1
- compatible_printers =
- compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
- complete_objects = 0
- default_acceleration = 1000
- dont_support_bridges = 1
- draft_shield = 0
- elefant_foot_compensation = 0.2
- ensure_vertical_shell_thickness = 1
- external_perimeter_extrusion_width = 0.45
- external_perimeter_speed = 20
- external_perimeters_first = 0
- extra_perimeters = 0
- extruder_clearance_height = 34
- extruder_clearance_radius = 47
- extrusion_width = 0.45
- fill_angle = 45
- fill_density = 20%
- fill_pattern = gyroid
- first_layer_acceleration = 1000
- first_layer_extrusion_width = 0.45
- first_layer_height = 0.2
- first_layer_speed = 20
- gap_fill_speed = 20
- gcode_comments = 0
- gcode_label_objects = 1
- infill_acceleration = 1000
- infill_anchor = 2.5
- infill_anchor_max = 12
- infill_every_layers = 1
- infill_extruder = 1
- infill_extrusion_width = 0.45
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 25%
- infill_speed = 40
- inherits = 0.20mm NORMAL Ender3
- interface_shells = 0
- ironing = 0
- ironing_flowrate = 15%
- ironing_spacing = 0.1
- ironing_speed = 15
- ironing_type = top
- layer_height = 0.08
- max_print_speed = 80
- max_volumetric_speed = 8
- min_skirt_length = 4
- notes =
- only_retract_when_crossing_perimeters = 1
- ooze_prevention = 0
- output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
- overhangs = 1
- perimeter_acceleration = 800
- perimeter_extruder = 1
- perimeter_extrusion_width = 0.45
- perimeter_speed = 30
- perimeters = 3
- post_process =
- print_settings_id =
- raft_layers = 0
- resolution = 0
- seam_position = nearest
- single_extruder_multi_material_priming = 0
- skirt_distance = 2
- skirt_height = 3
- skirts = 1
- slice_closing_radius = 0.049
- small_perimeter_speed = 20
- solid_infill_below_area = 0
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- solid_infill_extrusion_width = 0.45
- solid_infill_speed = 30
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_angle = 0
- support_material_auto = 1
- support_material_buildplate_only = 0
- support_material_contact_distance = 0.15
- support_material_enforce_layers = 0
- support_material_extruder = 0
- support_material_extrusion_width = 0.35
- support_material_interface_contact_loops = 0
- support_material_interface_extruder = 0
- support_material_interface_layers = 2
- support_material_interface_spacing = 0.2
- support_material_interface_speed = 100%
- support_material_pattern = rectilinear
- support_material_spacing = 2
- support_material_speed = 30
- support_material_synchronize_layers = 0
- support_material_threshold = 45
- support_material_with_sheath = 0
- support_material_xy_spacing = 50%
- thin_walls = 0
- threads = 16
- top_fill_pattern = monotonic
- top_infill_extrusion_width = 0.4
- top_solid_infill_speed = 30
- top_solid_layers = 12
- top_solid_min_thickness = 0.7
- travel_speed = 150
- wipe_tower = 0
- wipe_tower_bridging = 10
- wipe_tower_no_sparse_layers = 0
- wipe_tower_rotation_angle = 0
- wipe_tower_width = 60
- wipe_tower_x = 170
- wipe_tower_y = 140
- xy_size_compensation = 0
|
