| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455 |
- # generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 04:50:00 UTC
- bed_temperature = 90
- bridge_fan_speed = 50
- compatible_printers =
- compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
- compatible_prints =
- compatible_prints_condition =
- cooling = 1
- disable_fan_first_layers = 3
- end_filament_gcode = "; Filament-specific end gcode"
- extrusion_multiplier = 1
- fan_always_on = 1
- fan_below_layer_time = 20
- filament_colour = #0080C0
- filament_cooling_final_speed = 3.4
- filament_cooling_initial_speed = 2.2
- filament_cooling_moves = 4
- filament_cost = 25
- filament_density = 1.27
- filament_deretract_speed = nil
- filament_diameter = 1.75
- filament_load_time = 0
- filament_loading_speed = 28
- filament_loading_speed_start = 3
- filament_max_volumetric_speed = 24
- filament_minimal_purge_on_wipe_tower = 15
- filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nprimaSELECT PETG"
- filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
- filament_retract_before_travel = nil
- filament_retract_before_wipe = nil
- filament_retract_layer_change = nil
- filament_retract_length = 1.4
- filament_retract_lift = 0.2
- filament_retract_lift_above = nil
- filament_retract_lift_below = nil
- filament_retract_restart_extra = nil
- filament_retract_speed = nil
- filament_settings_id = ""
- filament_soluble = 0
- filament_toolchange_delay = 0
- filament_type = PETG
- filament_unload_time = 0
- filament_unloading_speed = 90
- filament_unloading_speed_start = 100
- filament_vendor = (Unknown)
- filament_wipe = nil
- first_layer_bed_temperature = 80
- first_layer_temperature = 220
- inherits = Generic PETG Volcano
- max_fan_speed = 50
- min_fan_speed = 30
- min_print_speed = 15
- slowdown_below_layer_time = 20
- start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.1{else}0{endif} ; Filament gcode"
- temperature = 225
|
