| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107 |
- # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:57:57
- avoid_crossing_perimeters = 1
- bottom_solid_layers = 12
- bridge_acceleration = 1500
- bridge_angle = 0
- bridge_flow_ratio = 0.8
- bridge_speed = 30
- brim_width = 0
- clip_multipart_objects = 1
- compatible_printers =
- compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
- complete_objects = 0
- default_acceleration = 1000
- dont_support_bridges = 1
- elefant_foot_compensation = 0.2
- ensure_vertical_shell_thickness = 1
- external_fill_pattern = rectilinear
- external_perimeter_extrusion_width = 0.9
- external_perimeter_speed = 35
- external_perimeters_first = 0
- extra_perimeters = 0
- extruder_clearance_height = 20
- extruder_clearance_radius = 20
- extrusion_width = 0.9
- fill_angle = 45
- fill_density = 20%
- fill_pattern = gyroid
- first_layer_acceleration = 1000
- first_layer_extrusion_width = 0.84
- first_layer_height = 0.4
- first_layer_speed = 20
- gap_fill_speed = 30
- gcode_comments = 0
- infill_acceleration = 1250
- infill_every_layers = 1
- infill_extruder = 1
- infill_extrusion_width = 0.9
- infill_first = 0
- infill_only_where_needed = 0
- infill_overlap = 25%
- infill_speed = 35
- inherits =
- interface_shells = 0
- layer_height = 0.05
- max_print_speed = 200
- max_volumetric_extrusion_rate_slope_negative = 0
- max_volumetric_extrusion_rate_slope_positive = 0
- max_volumetric_speed = 20
- min_skirt_length = 4
- notes =
- only_retract_when_crossing_perimeters = 1
- ooze_prevention = 0
- output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
- overhangs = 1
- perimeter_acceleration = 800
- perimeter_extruder = 1
- perimeter_extrusion_width = 0.9
- perimeter_speed = 30
- perimeters = 2
- post_process =
- print_settings_id =
- raft_layers = 0
- resolution = 0
- seam_position = nearest
- skirt_distance = 2
- skirt_height = 2
- skirts = 1
- small_perimeter_speed = 25
- solid_infill_below_area = 0
- solid_infill_every_layers = 0
- solid_infill_extruder = 1
- solid_infill_extrusion_width = 0.9
- solid_infill_speed = 35
- spiral_vase = 0
- standby_temperature_delta = -5
- support_material = 0
- support_material_angle = 0
- support_material_buildplate_only = 1
- support_material_contact_distance = 0.15
- support_material_enforce_layers = 0
- support_material_extruder = 0
- support_material_extrusion_width = 0.7
- support_material_interface_contact_loops = 0
- support_material_interface_extruder = 1
- support_material_interface_layers = 2
- support_material_interface_spacing = 0.2
- support_material_interface_speed = 100%
- support_material_pattern = rectilinear
- support_material_spacing = 2
- support_material_speed = 45
- support_material_synchronize_layers = 0
- support_material_threshold = 45
- support_material_with_sheath = 0
- support_material_xy_spacing = 60%
- thin_walls = 0
- threads = 12
- top_infill_extrusion_width = 0.8
- top_solid_infill_speed = 30
- top_solid_layers = 20
- travel_speed = 200
- wipe_tower = 0
- wipe_tower_bridging = 10
- wipe_tower_rotation_angle = 0
- wipe_tower_width = 60
- wipe_tower_x = 180
- wipe_tower_y = 140
- xy_size_compensation = 0
|
