| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273 |
- # generated by PrusaSlicer 2.1.0+win64 on 2019-10-14 at 02:07:42 UTC
- bed_custom_model = ender3_bed.stl
- bed_shape = 0x0,235x0,235x235,0x235
- before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
- between_objects_gcode =
- cooling_tube_length = 5
- cooling_tube_retraction = 91.5
- default_filament_profile =
- default_print_profile =
- deretract_speed = 0
- end_gcode = G4 ; wait\nM221 S100\nM106 S0 ; turn off cooling fan\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nG91\nG1 F1800 E-3\nG90\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG28 X0 ; home x and y axis\nG1 Y180; Remove Print Position\nM84 ; disable motors\n;M300 S2600 P100; Beep
- extra_loading_move = -2
- extruder_colour = #FFFF00
- extruder_offset = 0x0
- gcode_flavor = marlin
- high_current_on_filament_swap = 0
- host_type = octoprint
- inherits = Original Prusa i3 MK3
- layer_gcode = ;AFTER_LAYER_CHANGE\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
- machine_max_acceleration_e = 5000,5000
- machine_max_acceleration_extruding = 1250,1250
- machine_max_acceleration_retracting = 1250,1250
- machine_max_acceleration_x = 1000,960
- machine_max_acceleration_y = 1000,960
- machine_max_acceleration_z = 1000,1000
- machine_max_feedrate_e = 120,120
- machine_max_feedrate_x = 200,100
- machine_max_feedrate_y = 200,100
- machine_max_feedrate_z = 12,12
- machine_max_jerk_e = 1.5,1.5
- machine_max_jerk_x = 8,8
- machine_max_jerk_y = 8,8
- machine_max_jerk_z = 0.4,0.4
- machine_min_extruding_rate = 0,0
- machine_min_travel_rate = 0,0
- max_layer_height = 0.25
- max_print_height = 250
- min_layer_height = 0.07
- nozzle_diameter = 0.4
- parking_pos_retraction = 92
- print_host =
- printer_model =
- printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN\nPRINTER_NOT_VOLCANO
- printer_settings_id =
- printer_technology = FFF
- printer_variant =
- printer_vendor =
- printhost_apikey =
- printhost_cafile =
- remaining_times = 0
- retract_before_travel = 1.5
- retract_before_wipe = 60%
- retract_layer_change = 1
- retract_length = 6.8
- retract_length_toolchange = 4
- retract_lift = 0.6
- retract_lift_above = 0
- retract_lift_below = 239
- retract_restart_extra = 0
- retract_restart_extra_toolchange = 0
- retract_speed = 60
- serial_port =
- serial_speed = 250000
- silent_mode = 1
- single_extruder_multi_material = 0
- start_gcode = M117 Heating... ;Put printing message on LCD screen\n;M300 S2500 P100; Beep\nM221 S{if layer_height<0.075}100{else}95{endif} ; Set flow\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n\n\n;G1 Z50 ; this is a good start heating position\n;G28 X Y; Home X\n;G1 Y100 ; this is a good start heating position\nM84 ; disable motors\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; Auto Leveling\n;M280 P0 S160 ; BLTouch alarm release\n;G4 P100 ; delay for BLTouch\nG28 ; home\n;G29 ; auto bed leveling ONLY UNCOMMENT THIS IF BED LEVELING WITH BLTOUCH REMOVE\n; // M500 ; ONLY UNCOMMENT THIS IF BED LEVELING WITH BLTOUCH REMOVE\nM420 S1 ; Load Saved Eeprom From Auto Level\n\n; Start of print\nG21; metric values\nG90 ; absolute positioning\nM82; set extruder to absolute mode\n\n\n; Prepare nozzle\nG91;\nG92 E0 ; Set extrusion distance to 0\nG1 F1800 E3;\nG92 E0 ; Set extrusion distance to 0\nG90;\n\n; You may want to adjust the X and Y here so the nozzle is really above the bed!\nG1 X5 Y18 F7200 ; Move to a position in the left front of the bed\nG1 Z0.6; Move nozzle above 0.6 mm of the bed\n\nG91 ; Use relative mode\n; Make some jerky zick-zack move at the beginning\n; This is supposed to get rid of residue at the nozzle\nG1 X1.0 Y5.0 Z-0.1 E-1.0 F7200 ; X6 Y10 Z0.1, retract a tiny bit / 120mm/s\nG1 X1.0 Y-5.0 Z0.1 E2.0 F7200 ; X7 Y5 Z0.2 extrude a tiny bit\nG1 X2.0 Y5.0 Z-0.1 F7200 ; X9 Y10 Z0.1\nG1 X2.0 Y-5.0 Z0.1 F7200 ; X11 Y5 Z0.2\nG1 X2.0 Y5.0 F7200 ; X13 Y10\nG1 X2.0 Y-5.0 F7200 ; X15 Y5\n\n; now print a line of filament to prepare extrusion\nG1 X200 E40 F1000 ; prints a line in the front\n\n; Done with the dancing :)\nG92 E0 ; Set extrusion distance to 0\nG90 ; switch back to absolute mode\n\nM117 Printing... ;Put printing message on LCD screen\n; Start of actual GCode for the print
- toolchange_gcode =
- use_firmware_retraction = 0
- use_relative_e_distances = 1
- use_volumetric_e = 0
- variable_layer_height = 1
- wipe = 1
- z_offset = 0
|
