Accueil Explorer Aide
Connexion
3DPrinting
/
Slic3rPE-ender3
miroir de https://github.com/sn4k3/Ender3.git
2
0
Fork 0
Fichiers Tickets 0 Wiki
Aborescence: 09d6a03d54
Branches Tags
Slic3rPE-end...
/
PrusaSlicer
/
printer
/
Creality Ender-3 DirectDrive Volcano 0.6 Nozzle + BLTouch.ini

Creality Ender-3 DirectDrive Volcano 0.6 Nozzle + BLTouch.ini 4.4 KB
Historique Raw

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273 
  1. # generated by PrusaSlicer 2.0.0+win64 on 2019-08-12 at 03:42:11
    2. 

  2. bed_custom_model = ender3_bed.stl
    3. 

  3. bed_shape = 0x0,217x0,217x200,0x200
    4. 

  4. before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
    5. 

  5. between_objects_gcode = 
    6. 

  6. cooling_tube_length = 5
    7. 

  7. cooling_tube_retraction = 91.5
    8. 

  8. default_filament_profile = 
    9. 

  9. default_print_profile = 
    10. 

  10. deretract_speed = 0
    11. 

  11. end_gcode = G4 ; wait\nM221 S100\nM106 S0 ; turn off cooling fan\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nG91\nG1 F1800 E-3\nG90\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG28 X0 ; home x and y axis\nG1 Y180; Remove Print Position\nM84 ; disable motors\nM300 S2600 P100; Beep
    12. 

  12. extra_loading_move = -2
    13. 

  13. extruder_colour = #FFFF00
    14. 

  14. extruder_offset = 0x0
    15. 

  15. gcode_flavor = marlin
    16. 

  16. high_current_on_filament_swap = 0
    17. 

  17. host_type = octoprint
    18. 

  18. inherits = Original Prusa i3 MK3
    19. 

  19. layer_gcode = ;AFTER_LAYER_CHANGE\nG92 E0.0\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
    20. 

  20. machine_max_acceleration_e = 5000,5000
    21. 

  21. machine_max_acceleration_extruding = 1250,1250
    22. 

  22. machine_max_acceleration_retracting = 1250,1250
    23. 

  23. machine_max_acceleration_x = 1000,960
    24. 

  24. machine_max_acceleration_y = 1000,960
    25. 

  25. machine_max_acceleration_z = 1000,1000
    26. 

  26. machine_max_feedrate_e = 120,120
    27. 

  27. machine_max_feedrate_x = 200,100
    28. 

  28. machine_max_feedrate_y = 200,100
    29. 

  29. machine_max_feedrate_z = 12,12
    30. 

  30. machine_max_jerk_e = 1.5,1.5
    31. 

  31. machine_max_jerk_x = 8,8
    32. 

  32. machine_max_jerk_y = 8,8
    33. 

  33. machine_max_jerk_z = 0.4,0.4
    34. 

  34. machine_min_extruding_rate = 0,0
    35. 

  35. machine_min_travel_rate = 0,0
    36. 

  36. max_layer_height = 0.45
    37. 

  37. max_print_height = 237
    38. 

  38. min_layer_height = 0.1
    39. 

  39. nozzle_diameter = 0.6
    40. 

  40. parking_pos_retraction = 92
    41. 

  41. print_host = 192.168.1.35
    42. 

  42. printer_model = 
    43. 

  43. printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_FULLMODEL_ENDER3_DD_06\nPRINTER_HAS_VOLCANO\nPRINTER_HAS_DIRECT_DRIVE\nMAX_VOLUMETRIC_25
    44. 

  44. printer_settings_id = 
    45. 

  45. printer_technology = FFF
    46. 

  46. printer_variant = 
    47. 

  47. printer_vendor = 
    48. 

  48. printhost_apikey = 852FD1ED19874F178DF73B325E3E8640
    49. 

  49. printhost_cafile = 
    50. 

  50. remaining_times = 1
    51. 

  51. retract_before_travel = 1
    52. 

  52. retract_before_wipe = 0%
    53. 

  53. retract_layer_change = 1
    54. 

  54. retract_length = 0.8
    55. 

  55. retract_length_toolchange = 4
    56. 

  56. retract_lift = 0.6
    57. 

  57. retract_lift_above = 0
    58. 

  58. retract_lift_below = 236
    59. 

  59. retract_restart_extra = 0
    60. 

  60. retract_restart_extra_toolchange = 0
    61. 

  61. retract_speed = 35
    62. 

  62. serial_port = 
    63. 

  63. serial_speed = 250000
    64. 

  64. silent_mode = 1
    65. 

  65. single_extruder_multi_material = 0
    66. 

  66. start_gcode = M117 Heating... ;Put printing message on LCD screen\nM300 S2500 P100; Beep\nM204 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2\nM221 S{if layer_height<0.075}100{else}100{endif} ; Set flow\nM104 S140 ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n\n;G1 Z50 ; this is a good start heating position\nG28 X Y; Home X Y\nG1 Y10 ; this is a good start heating position\nM84 ; disable motors\n\nM109 S140; wait for extruder temp\n\n; Auto Leveling\nM280 P0 S160 ; BLTouch alarm release\nG4 P100 ; delay for BLTouch\nG28 ; home\nG29 ; auto bed leveling ONLY UNCOMMENT THIS IF BED LEVELING WITH BLTOUCH REMOVE\nM500 ; ONLY UNCOMMENT THIS IF BED LEVELING WITH BLTOUCH REMOVE\n;M420 S1 ; Load Saved Eeprom From Auto Level\n\nM104 S[first_layer_temperature] ; set extruder temp\n\n; Start of print\nG21; metric values\nG90 ; absolute positioning\nM83 ; use relative distances for extrusion\n\n; You may want to adjust the X and Y here so the nozzle is really above the bed!\nG1 X0 Y0 F7200 ; Move to a position in the left front of the bed\nG1 Z0.6; Move nozzle above 0.6 mm of the bed\nG91 ; Use relative mode\n\nM109 S[first_layer_temperature] ; wait for extruder temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\n\n\n; now print a line of filament to prepare extrusion\nG1 F1800 E3\nG1 Y40 E20 F1000 ; prints a line in the front\nG1 Y40 E20 F800 ; prints a line in the front\n\n; Done with the dancing :)\nG92 E0 ; Set extrusion distance to 0\nG90 ; switch back to absolute mode\n\nM117 Printing... ;Put printing message on LCD screen\n; Start of actual GCode for the print
    67. 

  67. toolchange_gcode = 
    68. 

  68. use_firmware_retraction = 0
    69. 

  69. use_relative_e_distances = 1
    70. 

  70. use_volumetric_e = 0
    71. 

  71. variable_layer_height = 1
    72. 

  72. wipe = 1
    73. 

  73. z_offset = 0
    74.