# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:50:05 UTC
bed_custom_model = 
bed_custom_texture = 
bed_shape = 0x0,220x0,220x220,0x220
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
between_objects_gcode = 
color_change_gcode = M600
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = 
default_print_profile = 
deretract_speed = 0
end_gcode = G4 ; wait\nM221 S100\nM106 S0 ; turn off cooling fan\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nG91\nG1 F1800 E-3\nG90\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+30, max_print_height)}{endif} ; Move print head up\nG28 X0 ; home x and y axis\nG1 Y180; Remove Print Position\nM84 ; disable motors\n;M300 S2600 P100; Beep
extra_loading_move = -2
extruder_colour = #FFFF00
extruder_offset = 0x0
gcode_flavor = marlin
high_current_on_filament_swap = 0
host_type = octoprint
inherits = Creality ENDER-3
layer_gcode = ;AFTER_LAYER_CHANGE\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
machine_limits_usage = emit_to_gcode
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1250,1250
machine_max_acceleration_retracting = 1250,1250
machine_max_acceleration_x = 1000,960
machine_max_acceleration_y = 1000,960
machine_max_acceleration_z = 1000,1000
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 200,100
machine_max_feedrate_y = 200,100
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 1.5,1.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.25
max_print_height = 250
min_layer_height = 0.07
nozzle_diameter = 0.4
parking_pos_retraction = 92
pause_print_gcode = M601
print_host = 
printer_model = Ender3
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN\nPRINTER_NOT_VOLCANO
printer_settings_id = 
printer_technology = FFF
printer_variant = 
printer_vendor = 
printhost_apikey = 
printhost_cafile = 
remaining_times = 0
retract_before_travel = 1.5
retract_before_wipe = 60%
retract_layer_change = 1
retract_length = 6.8
retract_length_toolchange = 4
retract_lift = 0.6
retract_lift_above = 0
retract_lift_below = 239
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
silent_mode = 0
single_extruder_multi_material = 0
start_gcode = M117 Heating... ;Put printing message on LCD screen\nM300 S2500 P100; Beep\nM204 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2\nM221 S{if layer_height<0.075}100{else}100{endif} ; Set flow\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\n\n;G1 Z50 ; this is a good start heating position\n;G28 X Y; Home X\n;G1 Y100 ; this is a good start heating position\n;M84 ; disable motors\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\n\n; Auto Leveling\n;M280 P0 S160 ; BLTouch alarm release\n;G4 P100 ; delay for BLTouch\nG28 ; home\n;G29 ; auto bed leveling ONLY UNCOMMENT THIS IF BED LEVELING WITH BLTOUCH REMOVE\n; // M500 ; ONLY UNCOMMENT THIS IF BED LEVELING WITH BLTOUCH REMOVE\nM420 S1 ; Load Saved Eeprom From Auto Level\n\n; Start of print\nG21; metric values\nG90 ; absolute positioning\nM83 ; use relative distances for extrusion\n\n; You may want to adjust the X and Y here so the nozzle is really above the bed!\nG1 X5 Y18 F7200 ; Move to a position in the left front of the bed\nG1 Z0.6; Move nozzle above 0.6 mm of the bed\n\nG91 ; Use relative mode\n; now print a line of filament to prepare extrusion\nG1 Y50 E40 F1000 ; prints a line in the front\nG1 Y50 E20 F1000 ; prints a line in the front\n\n; Done with the dancing :)\nG92 E0 ; Set extrusion distance to 0\nG90 ; switch back to absolute mode\n\nM117 Printing... ;Put printing message on LCD screen\n; Start of actual GCode for the print
template_custom_gcode = 
thumbnails = 
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0