Added 0.8mm nozzle direct drive (Test)

PrusaSlicer/print/0.30mm Ender3 @0.8 nozzle.ini

@@ -0,0 +1,114 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-30 at 05:58:39 UTC
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 31
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+draft_shield = 0
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.85
+external_perimeter_speed = 31
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.85
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.85
+first_layer_height = 0.4
+first_layer_speed = 23
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.85
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 31
+inherits = 
+interface_shells = 0
+layer_height = 0.3
+max_print_speed = 31
+max_volumetric_speed = 8
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.85
+perimeter_speed = 31
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 1
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.85
+solid_infill_speed = 31
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 31
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 1
+support_material_xy_spacing = 80%
+thin_walls = 1
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 31
+top_solid_layers = 4
+top_solid_min_thickness = 0.6
+travel_speed = 150
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

PrusaSlicer/print/0.40mm Ender3 @0.8 nozzle.ini

@@ -0,0 +1,114 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-30 at 05:56:06 UTC
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 23
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+draft_shield = 0
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.85
+external_perimeter_speed = 23
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.85
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.85
+first_layer_height = 0.4
+first_layer_speed = 23
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.85
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 23
+inherits = 
+interface_shells = 0
+layer_height = 0.4
+max_print_speed = 23
+max_volumetric_speed = 8
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.85
+perimeter_speed = 23
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 1
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.85
+solid_infill_speed = 23
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 23
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 1
+support_material_xy_spacing = 80%
+thin_walls = 1
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 23
+top_solid_layers = 3
+top_solid_min_thickness = 0.6
+travel_speed = 150
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0