0.6mm nozzle DD

PrusaSlicer/print/0.30mm 0.6 nozzle MK3.ini

@@ -1,7 +1,8 @@
-# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-01 at 17:21:43
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-30 at 15:43:09 UTC
 avoid_crossing_perimeters = 0
-bottom_solid_min_thickness = 0.5
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -9,13 +10,13 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.61
 external_perimeter_speed = 35
 external_perimeters_first = 0
@@ -24,15 +25,16 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0.67
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 1500
+gcode_label_objects = 0
+infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -44,8 +46,6 @@ inherits = 0.20mm FAST 0.6 nozzle MK3
 interface_shells = 0
 layer_height = 0.3
 max_print_speed = 50
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
 min_skirt_length = 4
 notes = 
@@ -63,9 +63,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -76,11 +78,12 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
 support_material_extruder = 0
-support_material_extrusion_width = 0.35
+support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
@@ -94,14 +97,16 @@ support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.6
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180

PrusaSlicer/print/0.35mm 0.6 nozzle MK3.ini

@@ -1,7 +1,8 @@
-# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-01 at 17:21:38
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-30 at 15:43:03 UTC
 avoid_crossing_perimeters = 0
-bottom_solid_min_thickness = 0.5
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -9,13 +10,13 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.61
 external_perimeter_speed = 35
 external_perimeters_first = 0
@@ -24,15 +25,16 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0.67
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 1500
+gcode_label_objects = 0
+infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -44,8 +46,6 @@ inherits = 0.20mm FAST 0.6 nozzle MK3
 interface_shells = 0
 layer_height = 0.35
 max_print_speed = 50
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
 min_skirt_length = 4
 notes = 
@@ -63,9 +63,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -76,11 +78,12 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
 support_material_extruder = 0
-support_material_extrusion_width = 0.35
+support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
@@ -94,14 +97,16 @@ support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 47
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.6
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180

PrusaSlicer/print/0.40mm 0.6 nozzle MK3.ini

@@ -1,7 +1,8 @@
-# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-01 at 17:33:55
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-30 at 15:42:58 UTC
 avoid_crossing_perimeters = 0
-bottom_solid_min_thickness = 0.5
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -9,13 +10,13 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.61
 external_perimeter_speed = 35
 external_perimeters_first = 0
@@ -24,15 +25,16 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0.67
 fill_angle = 45
-fill_density = 20%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.4
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 38
 gcode_comments = 0
-infill_acceleration = 1500
+gcode_label_objects = 0
+infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -44,8 +46,6 @@ inherits = 0.20mm FAST 0.6 nozzle MK3
 interface_shells = 0
 layer_height = 0.4
 max_print_speed = 50
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
 min_skirt_length = 4
 notes = 
@@ -63,9 +63,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -76,11 +78,12 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
 support_material_extruder = 0
-support_material_extrusion_width = 0.35
+support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
@@ -94,14 +97,16 @@ support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 41
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.6
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180

PrusaSlicer/print/0.45mm 0.6 nozzle MK3.ini

@@ -1,7 +1,8 @@
-# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-01 at 17:33:34
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-30 at 15:42:54 UTC
 avoid_crossing_perimeters = 0
-bottom_solid_min_thickness = 0.5
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 2
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -9,13 +10,13 @@ bridge_speed = 30
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
+draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.61
 external_perimeter_speed = 36
 external_perimeters_first = 0
@@ -24,15 +25,16 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0.67
 fill_angle = 45
-fill_density = 10%
+fill_density = 15%
 fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.4
-first_layer_speed = 30
+first_layer_speed = 20
 gap_fill_speed = 33
 gcode_comments = 0
-infill_acceleration = 1500
+gcode_label_objects = 0
+infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.7
@@ -44,8 +46,6 @@ inherits = 0.20mm FAST 0.6 nozzle MK3
 interface_shells = 0
 layer_height = 0.45
 max_print_speed = 50
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 0
 min_skirt_length = 4
 notes = 
@@ -63,9 +63,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -76,11 +78,12 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
 support_material_extruder = 0
-support_material_extrusion_width = 0.35
+support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
@@ -94,14 +97,16 @@ support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 36
-top_solid_min_thickness = 0.6
 top_solid_layers = 3
+top_solid_min_thickness = 0.6
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180