Preparation for new slicer version

PrusaSlicer/filament/ERYONE PLA Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.1.1+win64 on 2019-12-20 at 18:36:17 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 04:51:12 UTC
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -42,13 +42,14 @@ filament_type = PLA
 filament_unload_time = 0
 filament_unloading_speed = 90
 filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
 filament_wipe = nil
 first_layer_bed_temperature = 60
 first_layer_temperature = 220
 inherits = Generic PLA
 max_fan_speed = 100
 min_fan_speed = 100
-min_print_speed = 10
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}18{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}30{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
 temperature = 215

PrusaSlicer/filament/Generic ABS.ini

@@ -1,33 +0,0 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:45:46
-bed_temperature = 110
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_colour = #3A80CA
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_loading_speed = 28
-filament_max_volumetric_speed = 11
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
-filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = ABS
-filament_unloading_speed = 90
-first_layer_bed_temperature = 100
-first_layer_temperature = 255
-inherits = Generic ABS
-max_fan_speed = 25
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 25
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 255

PrusaSlicer/filament/Generic PET.ini

@@ -1,43 +0,0 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-08-09 at 19:59:43
-bed_temperature = 90
-bridge_fan_speed = 50
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FF8000
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 27.82
-filament_density = 1.27
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 8
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PET
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-first_layer_bed_temperature = 85
-first_layer_temperature = 230
-inherits = Generic PET
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 240

PrusaSlicer/filament/Generic PLA.ini

@@ -1,33 +0,0 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:44:39
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
-cooling = 1
-disable_fan_first_layers = 1
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF3232
-filament_cost = 0
-filament_density = 0
-filament_diameter = 1.75
-filament_loading_speed = 28
-filament_max_volumetric_speed = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unloading_speed = 90
-first_layer_bed_temperature = 60
-first_layer_temperature = 215
-inherits = Generic PLA
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 15
-slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 210

PrusaSlicer/filament/Generic ABS 240º Volcano.ini

@@ -1,30 +1,40 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-21 at 16:00:35
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 04:50:58 UTC
 bed_temperature = 115
-bridge_fan_speed = 40
+bridge_fan_speed = 30
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 compatible_prints = 
 compatible_prints_condition = 
 cooling = 1
-disable_fan_first_layers = 3
+disable_fan_first_layers = 4
 end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
-fan_always_on = 1
+fan_always_on = 0
 fan_below_layer_time = 20
 filament_colour = #3A80CA
 filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
 filament_cooling_moves = 4
-filament_cost = 19
+filament_cost = 27.82
 filament_density = 1.04
+filament_deretract_speed = nil
 filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 26
 filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "SUNLU ABS\nDevilDesign ABS"
+filament_notes = "List of materials tested with standard ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS"
 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
@@ -32,12 +42,14 @@ filament_type = ABS
 filament_unload_time = 0
 filament_unloading_speed = 90
 filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
 first_layer_bed_temperature = 115
 first_layer_temperature = 240
 inherits = Generic ABS 255º Volcano
 max_fan_speed = 30
 min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 25
+min_print_speed = 15
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}15{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}30{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
 temperature = 240

PrusaSlicer/filament/Generic ABS 255º Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 15:46:48
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 04:50:36 UTC
 bed_temperature = 115
 bridge_fan_speed = 40
 compatible_printers = 
@@ -6,7 +6,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 compatible_prints = 
 compatible_prints_condition = 
 cooling = 1
-disable_fan_first_layers = 3
+disable_fan_first_layers = 4
 end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
@@ -17,14 +17,24 @@ filament_cooling_initial_speed = 2.2
 filament_cooling_moves = 4
 filament_cost = 27.82
 filament_density = 1.04
+filament_deretract_speed = nil
 filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 26
 filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
+filament_notes = "List of materials tested with standard ABS print settings:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladec ABS"
 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
@@ -32,12 +42,14 @@ filament_type = ABS
 filament_unload_time = 0
 filament_unloading_speed = 90
 filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
 first_layer_bed_temperature = 110
 first_layer_temperature = 255
 inherits = Generic ABS
 max_fan_speed = 30
 min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 25
+min_print_speed = 15
+slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}15{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}30{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
 temperature = 255

PrusaSlicer/filament/Generic PET Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.1.1+win64 on 2019-12-17 at 03:40:09 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 03:22:23 UTC
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -24,7 +24,7 @@ filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 24
 filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "List of manufacturers tested with standard PET print settings:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladec PETG"
+filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
@@ -42,10 +42,11 @@ filament_type = PETG
 filament_unload_time = 0
 filament_unloading_speed = 90
 filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
 filament_wipe = nil
 first_layer_bed_temperature = 85
 first_layer_temperature = 230
-inherits = Generic PET
+inherits = Generic PETG
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 15

PrusaSlicer/filament/Generic PLA Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:23:24
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 03:22:54 UTC
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -17,14 +17,24 @@ filament_cooling_initial_speed = 2.2
 filament_cooling_moves = 4
 filament_cost = 19
 filament_density = 1.24
+filament_deretract_speed = nil
 filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
 filament_max_volumetric_speed = 25
 filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
+filament_notes = ""
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
@@ -32,12 +42,14 @@ filament_type = PLA
 filament_unload_time = 0
 filament_unloading_speed = 90
 filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
+filament_wipe = nil
 first_layer_bed_temperature = 60
 first_layer_temperature = 215
 inherits = Generic PLA
 max_fan_speed = 100
 min_fan_speed = 100
-min_print_speed = 10
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}18{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}30{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.04{else}0{endif} ; Filament gcode"
 temperature = 210

PrusaSlicer/filament/HDGlass PETG Volcano.ini

@@ -45,7 +45,7 @@ filament_unloading_speed_start = 100
 filament_wipe = nil
 first_layer_bed_temperature = 70
 first_layer_temperature = 220
-inherits = Generic PET Volcano
+inherits = Generic PETG Volcano
 max_fan_speed = 80
 min_fan_speed = 50
 min_print_speed = 5

PrusaSlicer/filament/PrimaSELECT PETG Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.1.1+win64 on 2019-12-17 at 03:40:22 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 04:50:00 UTC
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -42,13 +42,14 @@ filament_type = PETG
 filament_unload_time = 0
 filament_unloading_speed = 90
 filament_unloading_speed_start = 100
+filament_vendor = (Unknown)
 filament_wipe = nil
 first_layer_bed_temperature = 80
 first_layer_temperature = 220
-inherits = Generic PET Volcano
+inherits = Generic PETG Volcano
 max_fan_speed = 50
 min_fan_speed = 30
-min_print_speed = 5
+min_print_speed = 15
 slowdown_below_layer_time = 20
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.6}24{elsif printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and nozzle_diameter[0]==0.4}45{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.1{else}0{endif} ; Filament gcode"
 temperature = 225

PrusaSlicer/print/0.06mm 0.6 nozzle MK3 Volcano.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.1.1+win64 on 2020-03-17 at 05:04:01 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 8
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 30
+top_solid_min_thickness = 0.6
 top_solid_layers = 14
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:41:27
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 7
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 10
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:41:22
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 7
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 10
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:41:18
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 7
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 10
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.1.1+win64 on 2020-03-17 at 05:04:43 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 7
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 10
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:15
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 5
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 7
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:19
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 5
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 7
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:48
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 5
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 7
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:10
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 5
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 7
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,7 +1,8 @@
-# generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:39:07
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 04:41:14 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -13,7 +14,8 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+draft_shield = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
@@ -100,9 +102,11 @@ top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
 top_solid_layers = 5
+top_solid_min_thickness = 0.6
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:39:41
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 5
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:40:02
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 5
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:39:03
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 5
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:38:03
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 4
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:38:24
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 4
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:38:41
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 4
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:37:46
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 4
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.1.1+win64 on 2020-03-04 at 06:27:26 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 4
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:36:19
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 4
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:36:41
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 4
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano.ini

@@ -1,7 +1,8 @@
-# generated by PrusaSlicer 2.1.1+win64 on 2020-03-07 at 02:54:26 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-22 at 04:44:29 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
@@ -13,7 +14,8 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+draft_shield = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
@@ -100,9 +102,11 @@ top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
 top_solid_layers = 4
+top_solid_min_thickness = 0.6
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 170

PrusaSlicer/print/0.30mm 0.6 nozzle MK3.ini

@@ -1,5 +1,6 @@
 # generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-01 at 17:21:43
 avoid_crossing_perimeters = 0
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -12,7 +13,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.61
@@ -96,6 +97,7 @@ thin_walls = 0
 threads = 12
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:34:10
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:34:31
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:34:50
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:33:20
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3.ini

@@ -1,5 +1,6 @@
 # generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-01 at 17:21:38
 avoid_crossing_perimeters = 0
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -12,7 +13,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.61
@@ -96,6 +97,7 @@ thin_walls = 0
 threads = 12
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 47
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:31:05
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-07-18 at 15:38:36
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:32:32
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:30:14
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3.ini

@@ -1,5 +1,6 @@
 # generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-01 at 17:33:55
 avoid_crossing_perimeters = 0
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 2
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -12,7 +13,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.61
@@ -96,6 +97,7 @@ thin_walls = 0
 threads = 12
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 41
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:29:24
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:29:17
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:29:42
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 46
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.0.0+win64 on 2019-06-22 at 17:29:28
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 40
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3.ini

@@ -1,5 +1,6 @@
 # generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-01 at 17:33:34
 avoid_crossing_perimeters = 0
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 2
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -12,7 +13,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.61
@@ -96,6 +97,7 @@ thin_walls = 0
 threads = 12
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 36
+top_solid_min_thickness = 0.6
 top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/0.60mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,5 +1,6 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:09:16
 avoid_crossing_perimeters = 1
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 2
 bridge_acceleration = 1500
 bridge_angle = 0
@@ -12,7 +13,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0.1
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
@@ -96,6 +97,7 @@ thin_walls = 0
 threads = 12
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 18
+top_solid_min_thickness = 0.6
 top_solid_layers = 2
 travel_speed = 200
 wipe_tower = 0

PrusaSlicer/print/0.60mm Ender3 Volcano.ini

@@ -1,5 +1,6 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:09:22
 avoid_crossing_perimeters = 1
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 2
 bridge_acceleration = 1500
 bridge_angle = 0
@@ -12,7 +13,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0.1
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
@@ -96,6 +97,7 @@ thin_walls = 0
 threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 36
+top_solid_min_thickness = 0.6
 top_solid_layers = 2
 travel_speed = 200
 wipe_tower = 0

PrusaSlicer/print/0.60mm FAST 0.8 nozzle MK3.ini

@@ -1,5 +1,6 @@
 # generated by Slic3r Prusa Edition 1.39.1-prusa3d-win64 on 2018-05-08 at 15:29:05
 avoid_crossing_perimeters = 0
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 2
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -12,7 +13,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
@@ -95,6 +96,7 @@ thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 19
+top_solid_min_thickness = 0.6
 top_solid_layers = 2
 travel_speed = 170
 wipe_tower = 0

PrusaSlicer/print/0.65mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -1,5 +1,6 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:08:47
 avoid_crossing_perimeters = 1
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 2
 bridge_acceleration = 1500
 bridge_angle = 0
@@ -12,7 +13,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0.1
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.7
@@ -96,6 +97,7 @@ thin_walls = 0
 threads = 12
 top_infill_extrusion_width = 1.7
 top_solid_infill_speed = 16
+top_solid_min_thickness = 0.6
 top_solid_layers = 2
 travel_speed = 200
 wipe_tower = 0

PrusaSlicer/print/0.65mm Ender3 Volcano.ini

@@ -1,5 +1,6 @@
 # generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-28 at 05:08:52
 avoid_crossing_perimeters = 1
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 2
 bridge_acceleration = 1500
 bridge_angle = 0
@@ -12,7 +13,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0.1
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.9
@@ -96,6 +97,7 @@ thin_walls = 0
 threads = 12
 top_infill_extrusion_width = 0.8
 top_solid_infill_speed = 30
+top_solid_min_thickness = 0.6
 top_solid_layers = 2
 travel_speed = 200
 wipe_tower = 0

PrusaSlicer/print/Lithophanes 0.15mm 0.6 nozzle MK3 Volcano.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.1.1+win64 on 2019-12-20 at 19:32:05 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 5
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 30
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 25
+top_solid_min_thickness = 0.6
 top_solid_layers = 7
 travel_speed = 180
 wipe_tower = 1

PrusaSlicer/print/Lithophanes 0.20mm 0.6 nozzle MK3 Volcano.ini

@@ -1,6 +1,7 @@
 # generated by PrusaSlicer 2.1.1+win64 on 2019-12-21 at 02:50:16 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
+bottom_solid_min_thickness = 0.5
 bottom_solid_layers = 5
 bridge_acceleration = 1000
 bridge_angle = 0
@@ -13,7 +14,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.61
 external_perimeter_speed = 30
@@ -99,6 +100,7 @@ threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 25
+top_solid_min_thickness = 0.6
 top_solid_layers = 6
 travel_speed = 180
 wipe_tower = 1