Add model and change output filename

PrusaSlicer/print/0.04mm ULTRA DETAIL Ender3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.05mm Ender3 Volcano.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.06mm 0.6 nozzle MK3 Volcano.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.08mm VERY DETAIL Ender3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.10mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.10mm Ender3 Volcano.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.12mm DETAIL Ender3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.15mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.15mm Ender3 Volcano.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.16mm OPTIMAL Ender3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.20mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.20mm Ender3 Volcano.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.20mm FAST 0.8 nozzle MK3.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.20mm NORMAL Ender3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.24mm FAST Ender3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.25mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.25mm Ender3 Volcano.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.25mm VERY FAST MK3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.28mm VERY FAST Ender3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.30mm 0.6 nozzle MK3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.30mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.30mm Ender3 Volcano.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.30mm FAST 0.8 nozzle MK3.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.30mm ULTRA FAST MK3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.32mm ULTRA FAST Ender3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.35mm 0.6 nozzle MK3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.35mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.35mm Ender3 Volcano.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.40mm 0.6 nozzle MK3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.40mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.40mm Ender3 Volcano.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.40mm FAST 0.8 nozzle MK3.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.45mm 0.6 nozzle MK3.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.45mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.45mm Ender3 Volcano.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.50mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 500
 perimeter_extruder = 1

PrusaSlicer/print/0.50mm Ender3 Volcano.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.50mm FAST 0.8 nozzle MK3.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.55mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.55mm Ender3 Volcano.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.60mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.60mm Ender3 Volcano.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.60mm FAST 0.8 nozzle MK3.ini

@@ -49,7 +49,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.65mm Ender3 Volcano 1.7mm Extrusion.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/print/0.65mm Ender3 Volcano.ini

@@ -50,7 +50,7 @@ min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
 overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1

PrusaSlicer/printer/Creality Ender-3 DirectDrive Volcano 0.6 Nozzle + BLTouch RECALL.ini

@@ -39,7 +39,7 @@ min_layer_height = 0.1
 nozzle_diameter = 0.6
 parking_pos_retraction = 92
 print_host = 192.168.1.35
-printer_model = 
+printer_model = Ender3
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_FULLMODEL_ENDER3_DD_06\nPRINTER_HAS_VOLCANO\nPRINTER_HAS_DIRECT_DRIVE\nMAX_VOLUMETRIC_25
 printer_settings_id = 
 printer_technology = FFF

PrusaSlicer/printer/Creality Ender-3 DirectDrive Volcano 0.6 Nozzle + BLTouch.ini

@@ -39,7 +39,7 @@ min_layer_height = 0.1
 nozzle_diameter = 0.6
 parking_pos_retraction = 92
 print_host = 192.168.1.35
-printer_model = 
+printer_model = Ender3
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_FULLMODEL_ENDER3_DD_06\nPRINTER_HAS_VOLCANO\nPRINTER_HAS_DIRECT_DRIVE\nMAX_VOLUMETRIC_25
 printer_settings_id = 
 printer_technology = FFF

PrusaSlicer/printer/Creality Ender-3 Stock + BLTouch RECALL.ini

@@ -1,5 +1,6 @@
 # generated by PrusaSlicer 2.1.0+win64 on 2019-10-14 at 02:07:42 UTC
 bed_custom_model = ender3_bed.stl
+bed_custom_texture = 
 bed_shape = 0x0,235x0,235x235,0x235
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
 between_objects_gcode = 
@@ -39,7 +40,7 @@ min_layer_height = 0.07
 nozzle_diameter = 0.4
 parking_pos_retraction = 92
 print_host = 
-printer_model = 
+printer_model = Ender3
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN\nPRINTER_NOT_VOLCANO
 printer_settings_id = 
 printer_technology = FFF

PrusaSlicer/printer/Creality Ender-3 Stock + BLTouch.ini

@@ -40,7 +40,7 @@ min_layer_height = 0.07
 nozzle_diameter = 0.4
 parking_pos_retraction = 92
 print_host = 
-printer_model = 
+printer_model = Ender3
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN\nPRINTER_NOT_VOLCANO
 printer_settings_id = 
 printer_technology = FFF

PrusaSlicer/printer/Creality Ender-3 Stock.ini

@@ -40,7 +40,7 @@ min_layer_height = 0.07
 nozzle_diameter = 0.4
 parking_pos_retraction = 92
 print_host = 
-printer_model = 
+printer_model = Ender3
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN\nPRINTER_NOT_VOLCANO
 printer_settings_id = 
 printer_technology = FFF

PrusaSlicer/printer/Creality Ender-3 Volcano 0.8 Nozzle + BLTouch RECALL.ini

@@ -39,7 +39,7 @@ min_layer_height = 0.07
 nozzle_diameter = 0.8
 parking_pos_retraction = 92
 print_host = 192.168.1.35
-printer_model = 
+printer_model = Ender3
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN\nPRINTER_HAS_VOLCANO
 printer_settings_id = 
 printer_technology = FFF

PrusaSlicer/printer/Creality Ender-3 Volcano 0.8 Nozzle + BLTouch.ini

@@ -39,7 +39,7 @@ min_layer_height = 0.08
 nozzle_diameter = 0.8
 parking_pos_retraction = 92
 print_host = 192.168.1.35
-printer_model = 
+printer_model = Ender3
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN\nPRINTER_HAS_VOLCANO
 printer_settings_id = 
 printer_technology = FFF

PrusaSlicer/printer/Creality Ender-3 Volcano 0.8 Nozzle.ini

@@ -39,7 +39,7 @@ min_layer_height = 0.07
 nozzle_diameter = 0.8
 parking_pos_retraction = 92
 print_host = 192.168.1.35
-printer_model = 
+printer_model = Ender3
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN\nPRINTER_HAS_VOLCANO
 printer_settings_id = 
 printer_technology = FFF