Updates

PrusaSlicer/filament/Generic ABS 240º Volcano.ini

@@ -1,6 +1,6 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-06-04 at 01:31:04 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-26 at 13:31:48 UTC
 bed_temperature = 115
-bridge_fan_speed = 30
+bridge_fan_speed = 40
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
 compatible_prints = 
@@ -37,6 +37,7 @@ filament_retract_restart_extra = nil
 filament_retract_speed = nil
 filament_settings_id = ""
 filament_soluble = 0
+filament_spool_weight = 0
 filament_toolchange_delay = 0
 filament_type = ABS
 filament_unload_time = 0
@@ -46,6 +47,7 @@ filament_vendor = (Unknown)
 filament_wipe = nil
 first_layer_bed_temperature = 115
 first_layer_temperature = 240
+full_fan_speed_layer = 0
 inherits = Generic ABS 255º Volcano
 max_fan_speed = 30
 min_fan_speed = 30

PrusaSlicer/filament/Generic PETG Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-01-16 at 02:16:35 UTC
+# generated by PrusaSlicer 2.3.1+win64 on 2021-04-25 at 23:31:19 UTC
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -47,11 +47,11 @@ filament_vendor = (Unknown)
 filament_wipe = nil
 first_layer_bed_temperature = 85
 first_layer_temperature = 230
-full_fan_speed_layer = 0
+full_fan_speed_layer = 5
 inherits = Generic PETG
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 15
-slowdown_below_layer_time = 20
+slowdown_below_layer_time = 15
 start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.4}0.2{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.6}0.05{elsif printer_notes=~/.*PRINTER_MODEL_MK3.*/ and nozzle_diameter[0]==0.4}0.12{elsif printer_notes=~/.*PRINTER_FULLMODEL_ENDER3_DD_06.*/}0.02{else}0{endif} ; Filament gcode LA 1.5"
 temperature = 230

PrusaSlicer/print/0.06mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:42 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:17:43 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 10
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
@@ -28,14 +30,22 @@ extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.06
 max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 30
 top_solid_layers = 15
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:49 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:19:09 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 8
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
@@ -28,14 +30,22 @@ extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.8
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.1
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.8
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 10
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:21 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:19:42 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 8
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
@@ -28,14 +30,22 @@ extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.1
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 1
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 10
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:23 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:20:19 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 8
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
@@ -28,14 +30,22 @@ extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.1
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 1
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 10
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:45 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:18:29 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 7
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
@@ -28,14 +30,22 @@ extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.1
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 10
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:36 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:21:28 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 5
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
@@ -28,14 +30,22 @@ extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.8
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.15
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.8
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 7
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:02 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:21:54 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 5
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
@@ -28,14 +30,22 @@ extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.15
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 1
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 7
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:05 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:22:25 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 5
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
@@ -28,14 +30,22 @@ extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.15
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 1
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 7
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:51:12 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:20:52 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 5
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
@@ -28,14 +30,22 @@ extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.15
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 7
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:51:27 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:23:19 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
@@ -28,14 +30,22 @@ extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.8
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.8
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 5
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:19 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:23:39 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
@@ -28,14 +30,22 @@ extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 1
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 5
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:23 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:23:52 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
@@ -28,14 +30,22 @@ extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 1
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,7 +108,10 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
 support_material_buildplate_only = 1
+support_material_closing_radius = 2
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
 support_material_extruder = 0
@@ -95,15 +119,18 @@ support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
 support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 1
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 5
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:51:22 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:22:57 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
@@ -28,14 +30,22 @@ extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 5
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:31 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:24:34 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
@@ -28,14 +30,22 @@ extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.8
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.25
 max_print_speed = 142
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.8
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 4
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:34 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:24:57 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
@@ -28,14 +30,22 @@ extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.25
 max_print_speed = 142
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 1
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 4
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:38 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:25:20 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
@@ -28,14 +30,22 @@ extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.25
 max_print_speed = 142
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 1
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 4
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:51:36 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:24:14 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
@@ -28,14 +30,22 @@ extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.25
 max_print_speed = 142
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 4
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 19:52:22 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:14:57 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
@@ -28,14 +30,22 @@ extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.8
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.3
 max_print_speed = 119
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.8
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 4
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 19:55:02 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:15:50 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
@@ -28,14 +30,22 @@ extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.3
 max_print_speed = 119
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 1
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 4
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 19:55:49 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:17:06 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
@@ -28,14 +30,22 @@ extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.3
 max_print_speed = 119
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 1
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 4
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-03-28 at 02:50:05 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-11-22 at 18:47:04 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,16 +6,18 @@ bottom_solid_layers = 4
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
-dont_support_bridges = 1
-draft_shield = 0
+dont_support_bridges = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
@@ -28,13 +30,21 @@ extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
+gcode_resolution = 0.0125
+gcode_substitutions = 
 infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.3
 max_print_speed = 119
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 0.30mm 0.6 nozzle MK3 Volcano
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 4
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:50 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:26:02 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 3
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
@@ -28,14 +30,22 @@ extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.8
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.35
 max_print_speed = 102
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.8
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 3
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:54 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:26:35 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 3
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
@@ -28,14 +30,22 @@ extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.35
 max_print_speed = 102
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 1
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 3
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:57 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:26:59 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 3
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
@@ -28,14 +30,22 @@ extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.35
 max_print_speed = 102
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 1
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 3
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:09:45 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:25:43 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 3
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
@@ -28,14 +30,22 @@ extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.35
 max_print_speed = 102
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,18 +79,24 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 3
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:04 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:27:45 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 3
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
@@ -28,14 +30,22 @@ extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.8
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.4
 max_print_speed = 89
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.8
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 3
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:09 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:28:11 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 3
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
@@ -28,14 +30,22 @@ extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.4
 max_print_speed = 89
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 1
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 3
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:12 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:28:32 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 3
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
@@ -28,14 +30,22 @@ extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.4
 max_print_speed = 89
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,18 +79,24 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 1
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 3
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:01 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:27:23 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 3
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
@@ -28,14 +30,22 @@ extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.4
 max_print_speed = 89
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,18 +79,24 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 3
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:19 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:30:30 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 3
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.8
@@ -28,14 +30,22 @@ extrusion_width = 0.8
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.8
 first_layer_height = 0.3
-first_layer_speed = 30
+first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.45
 max_print_speed = 79
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.8
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 3
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:23 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:30:36 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -8,6 +8,8 @@ bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1
@@ -28,14 +30,22 @@ extrusion_width = 1
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1
 first_layer_height = 0.3
-first_layer_speed = 30
+first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.45
 max_print_speed = 79
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 1
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 3
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:26 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:30:40 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 3
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 1.2
@@ -28,14 +30,22 @@ extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
-first_layer_speed = 30
+first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.45
 max_print_speed = 79
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,18 +79,24 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 46
 perimeters = 1
 post_process = 
-print_settings_id = 
+print_settings_id = 0.45mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 15
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 46
 top_solid_layers = 3
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:16 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:30:26 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,8 +6,10 @@ bottom_solid_layers = 3
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
+brim_separation = 0.1
+brim_type = outer_only
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -15,7 +17,7 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and noz
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
@@ -28,14 +30,22 @@ extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
-first_layer_speed = 30
+first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 40
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.45
 max_print_speed = 79
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,18 +79,24 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 50
 top_solid_layers = 3
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/Lithophanes 0.15mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:43 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:31:05 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,16 +6,18 @@ bottom_solid_layers = 5
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
-brim_width = 10
+brim_separation = 0.1
+brim_type = outer_only
+brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.65
@@ -28,14 +30,22 @@ extrusion_width = 0.65
 fill_angle = 45
 fill_density = 99%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 25
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.15
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
+perimeter_generator = arachne
 perimeter_speed = 30
 perimeters = 10
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 25
 top_solid_layers = 7
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/print/Lithophanes 0.20mm 0.6 nozzle MK3 Volcano.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.0+win64 on 2021-02-04 at 20:10:50 UTC
+# generated by PrusaSlicer 2.5.0+win64 on 2022-09-09 at 02:31:59 UTC
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters_max_detour = 0
 bottom_fill_pattern = monotonic
@@ -6,16 +6,18 @@ bottom_solid_layers = 5
 bottom_solid_min_thickness = 0.6
 bridge_acceleration = 1000
 bridge_angle = 0
-bridge_flow_ratio = 0.95
+bridge_flow_ratio = 1
 bridge_speed = 25
-brim_width = 10
+brim_separation = 0.1
+brim_type = outer_only
+brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-draft_shield = 0
+draft_shield = disabled
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0.61
@@ -28,14 +30,22 @@ extrusion_width = 0.61
 fill_angle = 45
 fill_density = 99%
 fill_pattern = gyroid
-first_layer_acceleration = 1000
+first_layer_acceleration = 800
+first_layer_acceleration_over_raft = 0
 first_layer_extrusion_width = 0.61
 first_layer_height = 0.3
 first_layer_speed = 20
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
 gap_fill_speed = 25
 gcode_comments = 0
 gcode_label_objects = 1
-infill_acceleration = 1250
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 1000
 infill_anchor = 2.5
 infill_anchor_max = 15
 infill_every_layers = 1
@@ -54,8 +64,13 @@ ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
 max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 25
+min_bead_width = 85%
+min_feature_size = 25%
 min_skirt_length = 4
+mmu_segmented_region_max_width = 0
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -64,10 +79,15 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.61
+perimeter_generator = arachne
 perimeter_speed = 30
 perimeters = 10
 post_process = 
 print_settings_id = 
+raft_contact_distance = 0.25
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
 raft_layers = 0
 resolution = 0
 seam_position = nearest
@@ -76,6 +96,7 @@ skirt_distance = 2
 skirt_height = 3
 skirts = 1
 slice_closing_radius = 0.049
+slicing_mode = regular
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -87,23 +108,29 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = 0
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_closing_radius = 2
+support_material_contact_distance = 0.30
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 0
 support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
 support_material_interface_spacing = 0.3
-support_material_interface_speed = 100%
+support_material_interface_speed = 80%
 support_material_pattern = rectilinear
 support_material_spacing = 2
 support_material_speed = 50
+support_material_style = grid
 support_material_synchronize_layers = 0
-support_material_threshold = 55
+support_material_threshold = 50
 support_material_with_sheath = 0
 support_material_xy_spacing = 80%
+thick_bridges = 0
 thin_walls = 0
 threads = 16
 top_fill_pattern = monotonic
@@ -112,8 +139,14 @@ top_solid_infill_speed = 25
 top_solid_layers = 6
 top_solid_min_thickness = 0.9
 travel_speed = 180
+travel_speed_z = 12
+wall_distribution_count = 1
+wall_transition_angle = 10
+wall_transition_filter_deviation = 25%
+wall_transition_length = 0.6
 wipe_tower = 1
 wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
 wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60

PrusaSlicer/printer/Creality Ender-3 DirectDrive Volcano 0.6 Nozzle + BLTouch.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.3.1+win64 on 2021-04-21 at 22:49:53 UTC
+# generated by PrusaSlicer 2.4.0+win64 on 2022-01-08 at 18:09:45 UTC
 bed_custom_model = 
 bed_custom_texture = 
 bed_shape = 0x0,217x0,217x200,0x200
@@ -14,7 +14,7 @@ end_gcode = G4 ; wait\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM106 S0 ; tur
 extra_loading_move = -2
 extruder_colour = #FFFF00
 extruder_offset = 0x0
-gcode_flavor = marlin
+gcode_flavor = marlin2
 high_current_on_filament_swap = 0
 host_type = octoprint
 inherits = Original Prusa i3 MK3 0.6 nozzle Volcano
@@ -23,6 +23,7 @@ machine_limits_usage = emit_to_gcode
 machine_max_acceleration_e = 5000,5000
 machine_max_acceleration_extruding = 1250,1250
 machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_travel = 1500,1250
 machine_max_acceleration_x = 1000,960
 machine_max_acceleration_y = 1000,960
 machine_max_acceleration_z = 1000,1000