More print profiles for 0.6mm nozzle volcano

* Added more profiles for 0.6mm nozzle volcano
* Modified filaments
* Changed to PrusaSlicer
* Tuned some parameters

Slic3rPE/filament/FilaFarm ABS.ini

@@ -24,7 +24,7 @@ filament_type = ABS
 filament_unloading_speed = 90
 first_layer_bed_temperature = 110
 first_layer_temperature = 250
-inherits = Prusa ABS
+inherits = Generic ABS Volcano
 max_fan_speed = 25
 min_fan_speed = 10
 min_print_speed = 5

Slic3rPE/filament/SUNLU ABS Volcano.ini

@@ -1,13 +1,15 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-10-14 at 04:50:38
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:36:23
 bed_temperature = 115
 bridge_fan_speed = 30
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+compatible_prints = 
+compatible_prints_condition = 
 cooling = 1
 disable_fan_first_layers = 3
 end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
-fan_always_on = 0
+fan_always_on = 1
 fan_below_layer_time = 20
 filament_colour = #3A80CA
 filament_cooling_final_speed = 3.4
@@ -19,9 +21,9 @@ filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
-filament_max_volumetric_speed = 32
+filament_max_volumetric_speed = 28
 filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "SUNLU ABS"
+filament_notes = "SUNLU ABS\nDevilDesign ABS"
 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_settings_id = ""
 filament_soluble = 0
@@ -30,12 +32,12 @@ filament_type = ABS
 filament_unload_time = 0
 filament_unloading_speed = 90
 filament_unloading_speed_start = 100
-first_layer_bed_temperature = 110
+first_layer_bed_temperature = 115
 first_layer_temperature = 240
-inherits = Prusa ABS
+inherits = Generic ABS Volcano
 max_fan_speed = 30
-min_fan_speed = 10
+min_fan_speed = 30
 min_print_speed = 5
 slowdown_below_layer_time = 25
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}15{else}30{endif} ; Filament gcode"
 temperature = 240

Slic3rPE/filament/Generic ABS Volcano.ini

@@ -1,25 +1,27 @@
-# generated by Slic3r Prusa Edition 1.41.2+win64 on 2018-12-11 at 18:49:32
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:37:29
 bed_temperature = 115
 bridge_fan_speed = 30
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+compatible_prints = 
+compatible_prints_condition = 
 cooling = 1
 disable_fan_first_layers = 3
 end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
-fan_always_on = 0
+fan_always_on = 1
 fan_below_layer_time = 20
 filament_colour = #3A80CA
 filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
 filament_cooling_moves = 4
-filament_cost = 16
+filament_cost = 27.82
 filament_density = 1.04
 filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
 filament_loading_speed_start = 3
-filament_max_volumetric_speed = 32
+filament_max_volumetric_speed = 30
 filament_minimal_purge_on_wipe_tower = 15
 filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
 filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
@@ -34,8 +36,8 @@ first_layer_bed_temperature = 110
 first_layer_temperature = 255
 inherits = Generic ABS
 max_fan_speed = 30
-min_fan_speed = 10
+min_fan_speed = 30
 min_print_speed = 5
 slowdown_below_layer_time = 25
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}15{else}30{endif} ; Filament gcode"
 temperature = 255

Slic3rPE/filament/Generic PET Volcano.ini

@@ -1,8 +1,10 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:32:03
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:30:01
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+compatible_prints = 
+compatible_prints_condition = 
 cooling = 1
 disable_fan_first_layers = 3
 end_filament_gcode = "; Filament-specific end gcode"
@@ -13,8 +15,8 @@ filament_colour = #FF8000
 filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
 filament_cooling_moves = 4
-filament_cost = 25
-filament_density = 1.2
+filament_cost = 27.82
+filament_density = 1.27
 filament_diameter = 1.75
 filament_load_time = 0
 filament_loading_speed = 28
@@ -37,5 +39,5 @@ max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 15
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}22{else}45{endif} ; Filament gcode"
 temperature = 240

Slic3rPE/filament/HDGlass PETG.ini

@@ -1,8 +1,10 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:32:15
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:30:22
 bed_temperature = 75
 bridge_fan_speed = 50
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+compatible_prints = 
+compatible_prints_condition = 
 cooling = 1
 disable_fan_first_layers = 3
 end_filament_gcode = "; Filament-specific end gcode"
@@ -32,10 +34,10 @@ filament_unloading_speed = 90
 filament_unloading_speed_start = 100
 first_layer_bed_temperature = 70
 first_layer_temperature = 220
-inherits = Prusa PET
+inherits = Generic PET Volcano
 max_fan_speed = 80
 min_fan_speed = 50
 min_print_speed = 5
 slowdown_below_layer_time = 10
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}22{else}45{endif} ; Filament gcode"
 temperature = 220

Slic3rPE/filament/HDGlass PETG Volcano.ini

@@ -1,8 +1,10 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:38:01
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:32:46
 bed_temperature = 75
 bridge_fan_speed = 50
 compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+compatible_printers_condition = nozzle_diameter[0]!=0.6 and ! (printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+compatible_prints = 
+compatible_prints_condition = 
 cooling = 1
 disable_fan_first_layers = 3
 end_filament_gcode = "; Filament-specific end gcode"
@@ -10,18 +12,26 @@ extrusion_multiplier = 1.02
 fan_always_on = 1
 fan_below_layer_time = 20
 filament_colour = #FF8000
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
 filament_cost = 39
 filament_density = 1.27
 filament_diameter = 1.75
+filament_load_time = 0
 filament_loading_speed = 28
+filament_loading_speed_start = 3
 filament_max_volumetric_speed = 24
+filament_minimal_purge_on_wipe_tower = 15
 filament_notes = HDGlass
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
 filament_type = PET
+filament_unload_time = 0
 filament_unloading_speed = 90
+filament_unloading_speed_start = 100
 first_layer_bed_temperature = 70
 first_layer_temperature = 220
 inherits = Prusa PET

Slic3rPE/filament/PrimaSELECT PETG Volcano.ini

@@ -1,8 +1,10 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:37:42
-bed_temperature = 85
+# generated by Slic3r Prusa Edition 1.42.0-beta2+win64 on 2019-05-06 at 20:38:39
+bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
 compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+compatible_prints = 
+compatible_prints_condition = 
 cooling = 1
 disable_fan_first_layers = 3
 end_filament_gcode = "; Filament-specific end gcode"
@@ -10,24 +12,32 @@ extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 20
 filament_colour = #0080C0
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
 filament_cost = 25
-filament_density = 1.25
+filament_density = 1.27
 filament_diameter = 1.75
+filament_load_time = 0
 filament_loading_speed = 28
+filament_loading_speed_start = 3
 filament_max_volumetric_speed = 24
+filament_minimal_purge_on_wipe_tower = 15
 filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nprimaSELECT PETG"
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_settings_id = ""
 filament_soluble = 0
 filament_toolchange_delay = 0
 filament_type = PET
+filament_unload_time = 0
 filament_unloading_speed = 90
+filament_unloading_speed_start = 100
 first_layer_bed_temperature = 80
-first_layer_temperature = 225
-inherits = 
+first_layer_temperature = 220
+inherits = Generic PET Volcano
 max_fan_speed = 50
 min_fan_speed = 30
 min_print_speed = 5
 slowdown_below_layer_time = 20
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
-temperature = 230
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}22{else}45{endif} ; Filament gcode"
+temperature = 225

PrusaSlicer/filament/Prusament PETG 0.6 nozzle Volcano.ini

@@ -0,0 +1,43 @@
+# generated by Slic3r Prusa Edition 1.42.0-beta2+win64 on 2019-04-23 at 15:14:23
+bed_temperature = 90
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = nozzle_diameter[0]==0.6 and ! (printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK(2.5|3).*/ and single_extruder_multi_material)
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 24.99
+filament_density = 1.27
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 24
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PET
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+first_layer_bed_temperature = 85
+first_layer_temperature = 240
+inherits = Prusament PETG 0.6 nozzle
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 15
+slowdown_below_layer_time = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{elsif nozzle_diameter[0]==0.6}22{else}45{endif} ; Filament gcode"
+temperature = 250

Slic3rPE/print/0.06mm 0.6 nozzle MK3 Volcano.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-10-28 at 03:45:50
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:22:16
 avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 8
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 25
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.65
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
-gap_fill_speed = 30
+gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -39,12 +40,10 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 100
-inherits = 0.20mm FAST 0.6 nozzle MK3
+inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.06
-max_print_speed = 200
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
+max_print_speed = 150
 max_volumetric_speed = 30
 min_skirt_length = 4
 notes = 
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 30
+perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -64,20 +63,22 @@ resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.7
 solid_infill_speed = 100
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,7 +95,8 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 30
 top_solid_layers = 14

PrusaSlicer/print/0.10mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -0,0 +1,110 @@
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:21:38
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 7
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 1
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 150
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 150
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1
+perimeter_speed = 50
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1
+solid_infill_speed = 150
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1
+top_solid_infill_speed = 50
+top_solid_layers = 10
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.10mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:09:56
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:26:39
 avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 7
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.2
-external_perimeter_speed = 35
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 1.2
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,14 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 150
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
 layer_height = 0.1
-max_print_speed = 200
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 30
+max_print_speed = 150
+max_volumetric_speed = 27
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 50
 perimeters = 1
 post_process = 
 print_settings_id = 
@@ -64,20 +63,22 @@ resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 200
+solid_infill_speed = 150
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,10 +95,11 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
-top_infill_extrusion_width = 0.6
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
-top_solid_layers = 9
+top_solid_layers = 10
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10

Slic3rPE/print/0.10mm 0.6 nozzle MK3 Volcano.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-10-28 at 03:48:28
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:22:10
 avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 7
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 35
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.65
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,13 +39,11 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 150
+inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.1
-max_print_speed = 200
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
+max_print_speed = 150
 max_volumetric_speed = 30
 min_skirt_length = 4
 notes = 
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -64,20 +63,22 @@ resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 200
+solid_infill_extrusion_width = 0.7
+solid_infill_speed = 150
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,7 +95,8 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
 top_solid_layers = 10

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -0,0 +1,110 @@
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:23:04
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 1
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 150
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 150
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1
+perimeter_speed = 50
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1
+solid_infill_speed = 150
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1
+top_solid_infill_speed = 50
+top_solid_layers = 7
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -0,0 +1,110 @@
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:26:30
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 1.2
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1.2
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1.2
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 150
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 150
+max_volumetric_speed = 27
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1.2
+solid_infill_speed = 150
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1.2
+top_solid_infill_speed = 50
+top_solid_layers = 7
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.25mm 0.6 nozzle MK3 Volcano.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:26:31
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:25:00
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 35
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0.67
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,13 +39,11 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 166
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 150
+inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
-layer_height = 0.25
-max_print_speed = 166
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
+layer_height = 0.15
+max_print_speed = 150
 max_volumetric_speed = 30
 min_skirt_length = 4
 notes = 
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -64,20 +63,22 @@ resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.65
-solid_infill_speed = 166
+solid_infill_speed = 150
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,10 +95,11 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
-top_solid_layers = 3
+top_solid_layers = 7
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -0,0 +1,110 @@
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:16:10
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 1
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 150
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 150
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1
+perimeter_speed = 50
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1
+solid_infill_speed = 134
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1
+top_solid_infill_speed = 50
+top_solid_layers = 5
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.15mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:10:05
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:27:39
 avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.2
-external_perimeter_speed = 35
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 1.2
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,14 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 150
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
-layer_height = 0.15
-max_print_speed = 200
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
+layer_height = 0.2
+max_print_speed = 150
+max_volumetric_speed = 27
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 50
 perimeters = 1
 post_process = 
 print_settings_id = 
@@ -64,20 +63,22 @@ resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 166
+solid_infill_speed = 112
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,10 +95,11 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
-top_infill_extrusion_width = 0.6
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
-top_solid_layers = 6
+top_solid_layers = 5
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 Volcano.ini

@@ -0,0 +1,110 @@
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:25:11
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 150
+inherits = 0.30mm 0.6 nozzle MK3 Volcano
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 150
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.7
+solid_infill_speed = 150
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 5
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -0,0 +1,110 @@
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:38:17
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 1
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 154
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
+interface_shells = 0
+layer_height = 0.25
+max_print_speed = 154
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1
+perimeter_speed = 50
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1
+solid_infill_speed = 107
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.25mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:10:14
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:38:22
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.2
-external_perimeter_speed = 35
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 1.2
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,14 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 166
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 154
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
 layer_height = 0.25
-max_print_speed = 166
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 30
+max_print_speed = 154
+max_volumetric_speed = 27
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 50
 perimeters = 1
 post_process = 
 print_settings_id = 
@@ -64,20 +63,22 @@ resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 100
+solid_infill_speed = 89
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,10 +95,11 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
-top_infill_extrusion_width = 0.6
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
-top_solid_layers = 3
+top_solid_layers = 4
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 Volcano.ini

@@ -0,0 +1,110 @@
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 00:41:47
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 154
+inherits = 0.30mm 0.6 nozzle MK3 Volcano
+interface_shells = 0
+layer_height = 0.25
+max_print_speed = 154
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.7
+solid_infill_speed = 154
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

PrusaSlicer/print/0.30mm 0.6 nozzle MK3 Volcano 0.8mm Extrusion.ini

@@ -0,0 +1,110 @@
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:41:43
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.8
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.8
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.8
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 128
+inherits = 0.30mm 0.6 nozzle MK3 Volcano
+interface_shells = 0
+layer_height = 0.3
+max_print_speed = 128
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.8
+perimeter_speed = 50
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.8
+solid_infill_speed = 112
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:10:18
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:20:19
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 1.2
-external_perimeter_speed = 35
+external_perimeter_extrusion_width = 1
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 1
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
-first_layer_extrusion_width = 1.2
+first_layer_extrusion_width = 1
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,13 +39,11 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 138
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 128
+inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.3
-max_print_speed = 138
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
+max_print_speed = 128
 max_volumetric_speed = 30
 min_skirt_length = 4
 notes = 
@@ -54,9 +53,9 @@ output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.g
 overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
-perimeter_extrusion_width = 0.65
-perimeter_speed = 45
-perimeters = 1
+perimeter_extrusion_width = 1
+perimeter_speed = 50
+perimeters = 2
 post_process = 
 print_settings_id = 
 raft_layers = 0
@@ -64,20 +63,22 @@ resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 1.2
-solid_infill_speed = 83
+solid_infill_extrusion_width = 1
+solid_infill_speed = 90
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,10 +95,11 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
-top_infill_extrusion_width = 0.6
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1
 top_solid_infill_speed = 50
-top_solid_layers = 3
+top_solid_layers = 4
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10

Slic3rPE/print/0.20mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:10:09
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:20:23
 avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.2
-external_perimeter_speed = 35
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 1.2
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,14 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 128
+inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
-layer_height = 0.2
-max_print_speed = 200
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 30
+layer_height = 0.3
+max_print_speed = 128
+max_volumetric_speed = 27
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 50
 perimeters = 1
 post_process = 
 print_settings_id = 
@@ -64,20 +63,22 @@ resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 125
+solid_infill_speed = 75
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,8 +95,9 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
-top_infill_extrusion_width = 0.6
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
 top_solid_layers = 4
 travel_speed = 180

Slic3rPE/print/0.20mm 0.6 nozzle MK3 Volcano.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:26:46
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:39:07
 avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 35
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.65
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,13 +39,11 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 200
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 128
+inherits = 0.30mm QUALITY 0.6 nozzle MK3
 interface_shells = 0
-layer_height = 0.2
-max_print_speed = 200
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
+layer_height = 0.3
+max_print_speed = 128
 max_volumetric_speed = 30
 min_skirt_length = 4
 notes = 
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -64,20 +63,22 @@ resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 200
+solid_infill_extrusion_width = 0.7
+solid_infill_speed = 128
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,7 +95,8 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
 top_solid_layers = 4

PrusaSlicer/print/0.35mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -0,0 +1,110 @@
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:20:48
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 1
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 110
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
+interface_shells = 0
+layer_height = 0.35
+max_print_speed = 110
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1
+perimeter_speed = 50
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1
+solid_infill_speed = 77
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.35mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:10:23
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:31:49
 avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.2
-external_perimeter_speed = 35
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 1.2
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,14 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 118
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 110
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
 layer_height = 0.35
-max_print_speed = 118
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 30
+max_print_speed = 110
+max_volumetric_speed = 27
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 50
 perimeters = 1
 post_process = 
 print_settings_id = 
@@ -64,20 +63,22 @@ resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 2
+skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 71
+solid_infill_speed = 64
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,8 +95,9 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
-top_infill_extrusion_width = 0.6
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
 top_solid_layers = 3
 travel_speed = 180

Slic3rPE/print/0.35mm 0.6 nozzle MK3 Volcano.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:27:53
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 00:53:57
 avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 35
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.65
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,13 +39,11 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 118
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 110
+inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.35
-max_print_speed = 118
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
+max_print_speed = 110
 max_volumetric_speed = 30
 min_skirt_length = 4
 notes = 
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -66,18 +65,20 @@ single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 118
+solid_infill_extrusion_width = 0.7
+solid_infill_speed = 110
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,7 +95,8 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
 top_solid_layers = 3

PrusaSlicer/print/0.40mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -0,0 +1,110 @@
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:21:14
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 1
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 96
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
+interface_shells = 0
+layer_height = 0.4
+max_print_speed = 96
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1
+perimeter_speed = 50
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1
+solid_infill_speed = 67
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.40mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-12 at 23:10:27
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:33:23
 avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.2
-external_perimeter_speed = 35
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 1.2
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,14 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 104
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 96
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
 layer_height = 0.4
-max_print_speed = 104
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 30
+max_print_speed = 96
+max_volumetric_speed = 27
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 50
 perimeters = 1
 post_process = 
 print_settings_id = 
@@ -66,18 +65,20 @@ single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 62
+solid_infill_speed = 56
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,8 +95,9 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
-top_infill_extrusion_width = 0.6
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1.2
 top_solid_infill_speed = 50
 top_solid_layers = 3
 travel_speed = 180

Slic3rPE/print/0.40mm 0.6 nozzle MK3 Volcano.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-21 at 02:29:36
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:40:14
 avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 35
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.65
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,13 +39,11 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 104
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 96
+inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
 layer_height = 0.4
-max_print_speed = 104
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
+max_print_speed = 96
 max_volumetric_speed = 30
 min_skirt_length = 4
 notes = 
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -66,18 +65,20 @@ single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 104
+solid_infill_extrusion_width = 0.7
+solid_infill_speed = 96
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,7 +95,8 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
 top_solid_layers = 3

PrusaSlicer/print/0.45mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion.ini

@@ -0,0 +1,110 @@
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 01:21:41
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 1
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1250
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 86
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.0mm Extrusion
+interface_shells = 0
+layer_height = 0.45
+max_print_speed = 86
+max_volumetric_speed = 30
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1
+perimeter_speed = 50
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0

Slic3rPE/print/0.45mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-17 at 19:28:49
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:35:38
 avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,9 +15,8 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 1.2
-external_perimeter_speed = 35
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
@@ -24,13 +24,14 @@ extruder_clearance_radius = 20
 extrusion_width = 1.2
 fill_angle = 45
 fill_density = 15%
-fill_pattern = grid
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 1.2
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,14 +39,12 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 92
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 86
+inherits = 0.30mm 0.6 nozzle MK3 Volcano 1.2mm Extrusion
 interface_shells = 0
 layer_height = 0.45
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 30
+max_print_speed = 86
+max_volumetric_speed = 27
 min_skirt_length = 4
 notes = 
 only_retract_when_crossing_perimeters = 0
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 49
 perimeters = 1
 post_process = 
 print_settings_id = 
@@ -64,20 +63,22 @@ resolution = 0
 seam_position = nearest
 single_extruder_multi_material_priming = 0
 skirt_distance = 2
-skirt_height = 1
+skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 15
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 1.2
-solid_infill_speed = 52
+solid_infill_speed = 49
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,10 +95,11 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 1.2
-top_solid_infill_speed = 50
-top_solid_layers = 2
+top_solid_infill_speed = 49
+top_solid_layers = 3
 travel_speed = 180
 wipe_tower = 1
 wipe_tower_bridging = 10

Slic3rPE/print/0.30mm 0.6 nozzle MK3 Volcano.ini

@@ -1,10 +1,11 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:27:22
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-22 at 00:53:44
 avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 25
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -14,23 +15,23 @@ default_acceleration = 1000
 dont_support_bridges = 1
 elefant_foot_compensation = 0
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 35
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 40
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.65
 fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
+fill_density = 15%
+fill_pattern = gyroid
 first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
+gcode_label_objects = 0
 infill_acceleration = 1250
 infill_every_layers = 1
 infill_extruder = 1
@@ -38,13 +39,11 @@ infill_extrusion_width = 0.7
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 138
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 86
+inherits = 0.30mm 0.6 nozzle MK3 Volcano
 interface_shells = 0
-layer_height = 0.3
-max_print_speed = 138
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
+layer_height = 0.45
+max_print_speed = 86
 max_volumetric_speed = 30
 min_skirt_length = 4
 notes = 
@@ -55,7 +54,7 @@ overhangs = 0
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 50
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -66,18 +65,20 @@ single_extruder_multi_material_priming = 0
 skirt_distance = 2
 skirt_height = 2
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.65
-solid_infill_speed = 138
+solid_infill_extrusion_width = 0.7
+solid_infill_speed = 86
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 1
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.1
 support_material_enforce_layers = 0
 support_material_extruder = 0
 support_material_extrusion_width = 0.55
@@ -94,7 +95,8 @@ support_material_threshold = 55
 support_material_with_sheath = 0
 support_material_xy_spacing = 50%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
 top_solid_infill_speed = 50
 top_solid_layers = 3

Slic3rPE/printer/Creality Ender-3 DD Volcano 0.6 Nozzle+BLTouch RECALL.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.41.2+win64 on 2018-12-16 at 17:12:44
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:46:51
 bed_shape = 0x0,220x0,220x220,0x220
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
 between_objects_gcode = 
@@ -12,6 +12,7 @@ extra_loading_move = -2
 extruder_colour = #FFFF00
 extruder_offset = 0x0
 gcode_flavor = marlin
+high_current_on_filament_swap = 0
 host_type = octoprint
 inherits = 
 layer_gcode = ;AFTER_LAYER_CHANGE\nG92 E0.0\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
@@ -32,7 +33,7 @@ machine_max_jerk_z = 0.4,0.4
 machine_min_extruding_rate = 0,0
 machine_min_travel_rate = 0,0
 max_layer_height = 0.45
-max_print_height = 240
+max_print_height = 255
 min_layer_height = 0.1
 nozzle_diameter = 0.6
 parking_pos_retraction = 92
@@ -40,6 +41,7 @@ print_host = 192.168.1.35
 printer_model = 
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_VOLCANO\nPRINTER_HAS_DIRECT_DRIVE\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\nMAX_VOLUMETRIC_25\nMAX_SPEED_85
 printer_settings_id = 
+printer_technology = FFF
 printer_variant = 
 printer_vendor = 
 printhost_apikey = 852FD1ED19874F178DF73B325E3E8640
@@ -52,7 +54,7 @@ retract_length = 0.8
 retract_length_toolchange = 10
 retract_lift = 0.6
 retract_lift_above = 0
-retract_lift_below = 239
+retract_lift_below = 254
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 70

Slic3rPE/printer/Creality Ender-3 Volcano 0.8 Nozzle+BLTouch RECALL.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.41.2+win64 on 2019-02-08 at 18:01:11
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:47:39
 bed_shape = 0x0,220x0,220x220,0x220
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
 between_objects_gcode = 
@@ -12,6 +12,7 @@ extra_loading_move = -2
 extruder_colour = #FFFF00
 extruder_offset = 0x0
 gcode_flavor = marlin
+high_current_on_filament_swap = 0
 host_type = octoprint
 inherits = 
 layer_gcode = ;AFTER_LAYER_CHANGE\nG92 E0.0\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
@@ -40,6 +41,7 @@ print_host = 192.168.1.35
 printer_model = 
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN\nPRINTER_HAS_VOLCANO
 printer_settings_id = 
+printer_technology = FFF
 printer_variant = 
 printer_vendor = 
 printhost_apikey = 852FD1ED19874F178DF73B325E3E8640

Slic3rPE/printer/Creality Ender-3 Volcano 0.8 Nozzle+BLTouch.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.41.2+win64 on 2019-02-08 at 18:01:01
+# generated by PrusaSlicer 2.0.0+win64 on 2019-05-23 at 00:47:21
 bed_shape = 0x0,220x0,220x220,0x220
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
 between_objects_gcode = 
@@ -12,6 +12,7 @@ extra_loading_move = -2
 extruder_colour = #FFFF00
 extruder_offset = 0x0
 gcode_flavor = marlin
+high_current_on_filament_swap = 0
 host_type = octoprint
 inherits = 
 layer_gcode = ;AFTER_LAYER_CHANGE\nG92 E0.0\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
@@ -40,6 +41,7 @@ print_host = 192.168.1.35
 printer_model = 
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_BOWDEN\nPRINTER_HAS_VOLCANO
 printer_settings_id = 
+printer_technology = FFF
 printer_variant = 
 printer_vendor = 
 printhost_apikey = 852FD1ED19874F178DF73B325E3E8640

README.md

@@ -8,7 +8,7 @@ Discussion Groups:
 * https://www.facebook.com/groups/Ender3/
 
 
-## 1. Slic3rPE
+## 1. PrusaSlicer
 
 These profiles are based on a quality/speed balance (Universal).
 Good prints without sacrifice the speed.
@@ -19,17 +19,17 @@ Make sure you have a good leveled printer and bed.
 Modify at your needs.
 
 ### 1.1. Instalation
-1. Download Slic3rPE from: https://github.com/prusa3d/Slic3r/releases
-2. Start and configure Slic3rPE (Wizard)
-3. Close Slic3rPE
+1. Download PrusaSlicer from: https://github.com/prusa3d/Slic3r/releases
+2. Start and configure PrusaSlicer (Wizard)
+3. Close PrusaSlicer
 4. On different operating systems open:
-   * Windows: "%AppData%\Slic3rPE\", if not exists try: "C:\Users\Public\Documents\Prusa3D\Slic3r settings xxxx"
-   * Mac: "/Users/[Username]/Library/Application Support/Slic3rPE"
+   * Windows: "%AppData%\PrusaSlicer\", if not exists try: "C:\Users\Public\Documents\Prusa3D\Slic3r settings xxxx"
+   * Mac: "/Users/[Username]/Library/Application Support/PrusaSlicer"
    * Linux: 
-      * Stable build: "~/.Slic3rPE/"
-      * Alpha build: "~/.Slic3rPE-alpha/"
-5. Copy GitHub Slic3rPE subfolders ("printer", "filament", "print") to the folder above
-7. Open Slic3rPE and check if profiles are there
+      * Stable build: "~/.PrusaSlicer/"
+      * Alpha build: "~/.PrusaSlicer-alpha/"
+5. Copy GitHub PrusaSlicer subfolders ("printer", "filament", "print") to the folder above
+7. Open PrusaSlicer and check if profiles are there
 8. To clean up interface remove profiles that you will not use: Printers you will not use (OPTIONAL)
 9. Go under printer and use your current values for your printer, like max Z, limits, start gcodes or other things you may need to tune
 10. Do a simple test print

Slic3rPE/filament/FilaFarm ABS Volcano.ini

@@ -1,41 +0,0 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-09-02 at 03:31:33
-bed_temperature = 115
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.04
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_colour = #3A80CA
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 19
-filament_density = 1.04
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 32
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "FilaFarm ABS"
-filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = ABS
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-first_layer_bed_temperature = 110
-first_layer_temperature = 250
-inherits = Prusa ABS
-max_fan_speed = 25
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 25
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 250

Slic3rPE/filament/SAKATA ABS Volcano.ini

@@ -1,41 +0,0 @@
-# generated by Slic3r Prusa Edition 1.41.0+win64 on 2018-10-14 at 04:50:56
-bed_temperature = 115
-bridge_fan_speed = 30
-compatible_printers = 
-compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode"
-extrusion_multiplier = 1.01
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 19
-filament_density = 1.04
-filament_diameter = 1.75
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 32
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = "SAKATA ABS"
-filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_settings_id = ""
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = ABS
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-first_layer_bed_temperature = 110
-first_layer_temperature = 245
-inherits = Prusa ABS
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 25
-start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
-temperature = 245