Better values for stock Ender3

PrusaSlicer/print/0.04mm ULTRA DETAIL Ender3.ini

@@ -1,6 +1,8 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:50:05
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:12 UTC
 avoid_crossing_perimeters = 1
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 20
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,15 +14,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+draft_shield = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 20
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 25%
@@ -31,7 +33,8 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 20
 gcode_comments = 0
-infill_acceleration = 1250
+gcode_label_objects = 0
+infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -39,12 +42,10 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 40
-inherits = 
+inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
 layer_height = 0.04
 max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 8
 min_skirt_length = 4
 notes = 
@@ -62,9 +63,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,6 +78,7 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
@@ -93,13 +97,16 @@ support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 20
 top_solid_layers = 25
-travel_speed = 200
+top_solid_min_thickness = 0.6
+travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180

PrusaSlicer/print/0.08mm VERY DETAIL Ender3.ini

@@ -1,6 +1,8 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:49:33
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:29 UTC
 avoid_crossing_perimeters = 1
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 9
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,15 +14,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+draft_shield = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 20
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 25%
@@ -31,7 +33,8 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 20
 gcode_comments = 0
-infill_acceleration = 1250
+gcode_label_objects = 0
+infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -39,12 +42,10 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 40
-inherits = 
+inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
 layer_height = 0.08
 max_print_speed = 80
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 8
 min_skirt_length = 4
 notes = 
@@ -62,9 +63,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 20
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,6 +78,7 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
@@ -93,13 +97,16 @@ support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 30
 top_solid_layers = 12
-travel_speed = 200
+top_solid_min_thickness = 0.6
+travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180

PrusaSlicer/print/0.12mm DETAIL Ender3.ini

@@ -1,6 +1,8 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:49:24
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:34 UTC
 avoid_crossing_perimeters = 1
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 7
+bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
@@ -12,15 +14,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+draft_shield = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
@@ -31,7 +33,8 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 20
 gcode_comments = 0
-infill_acceleration = 1250
+gcode_label_objects = 0
+infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -39,12 +42,10 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 60
-inherits = 
+inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
 layer_height = 0.12
 max_print_speed = 150
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 8
 min_skirt_length = 4
 notes = 
@@ -62,9 +63,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,6 +78,7 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
@@ -93,13 +97,16 @@ support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 8
-travel_speed = 200
+top_solid_min_thickness = 0.6
+travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180

PrusaSlicer/print/0.16mm OPTIMAL Ender3.ini

@@ -1,7 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:49:15
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:39 UTC
 avoid_crossing_perimeters = 1
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 6
-bridge_acceleration = 1500
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -12,15 +14,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+draft_shield = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
@@ -31,7 +33,8 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 1250
+gcode_label_objects = 0
+infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -39,12 +42,10 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 80
-inherits = 
+inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
 layer_height = 0.16
 max_print_speed = 110
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 8
 min_skirt_length = 4
 notes = 
@@ -62,9 +63,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,6 +78,7 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
@@ -93,13 +97,16 @@ support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 6
-travel_speed = 200
+top_solid_min_thickness = 0.6
+travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180

PrusaSlicer/print/0.20mm NORMAL Ender3.ini

@@ -1,7 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:47:10
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:38:58 UTC
 avoid_crossing_perimeters = 1
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 5
-bridge_acceleration = 1500
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -12,15 +14,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+draft_shield = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
@@ -31,7 +33,8 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 1250
+gcode_label_objects = 0
+infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -39,12 +42,10 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 80
-inherits = 
+inherits = 0.20mm NORMAL @ENDER3
 interface_shells = 0
 layer_height = 0.2
 max_print_speed = 90
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 8
 min_skirt_length = 4
 notes = 
@@ -62,9 +63,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,6 +78,7 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
@@ -93,13 +97,16 @@ support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 5
-travel_speed = 200
+top_solid_min_thickness = 0.6
+travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180

PrusaSlicer/print/0.24mm FAST Ender3.ini

@@ -1,7 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:48:33
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:45 UTC
 avoid_crossing_perimeters = 1
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
-bridge_acceleration = 1500
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -12,15 +14,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+draft_shield = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
@@ -31,7 +33,8 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 1250
+gcode_label_objects = 0
+infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -39,12 +42,10 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 74
-inherits = 
+inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
 layer_height = 0.24
 max_print_speed = 75
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 8
 min_skirt_length = 4
 notes = 
@@ -62,9 +63,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,6 +78,7 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
@@ -93,13 +97,16 @@ support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 4
-travel_speed = 200
+top_solid_min_thickness = 0.6
+travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180

PrusaSlicer/print/0.28mm VERY FAST Ender3.ini

@@ -1,7 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:50:50
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:50 UTC
 avoid_crossing_perimeters = 1
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 4
-bridge_acceleration = 1500
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -12,15 +14,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+draft_shield = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
@@ -31,7 +33,8 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 1250
+gcode_label_objects = 0
+infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -39,12 +42,10 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 64
-inherits = 
+inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
 layer_height = 0.28
 max_print_speed = 64
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 8
 min_skirt_length = 4
 notes = 
@@ -62,9 +63,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,6 +78,7 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
@@ -93,13 +97,16 @@ support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 4
-travel_speed = 200
+top_solid_min_thickness = 0.6
+travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180

PrusaSlicer/print/0.32mm ULTRA FAST Ender3.ini

@@ -1,7 +1,9 @@
-# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:52:49
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:39:55 UTC
 avoid_crossing_perimeters = 1
+bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
-bridge_acceleration = 1500
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.8
 bridge_speed = 30
@@ -12,15 +14,15 @@ compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and
 complete_objects = 0
 default_acceleration = 1000
 dont_support_bridges = 1
-elefant_foot_compensation = 0
+draft_shield = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0.45
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
 extrusion_width = 0.45
 fill_angle = 45
 fill_density = 20%
@@ -31,7 +33,8 @@ first_layer_height = 0.2
 first_layer_speed = 20
 gap_fill_speed = 40
 gcode_comments = 0
-infill_acceleration = 1250
+gcode_label_objects = 0
+infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
 infill_extrusion_width = 0.45
@@ -39,12 +42,10 @@ infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
 infill_speed = 56
-inherits = 
+inherits = 0.20mm NORMAL Ender3
 interface_shells = 0
 layer_height = 0.32
 max_print_speed = 56
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
 max_volumetric_speed = 8
 min_skirt_length = 4
 notes = 
@@ -62,9 +63,11 @@ print_settings_id =
 raft_layers = 0
 resolution = 0
 seam_position = nearest
+single_extruder_multi_material_priming = 1
 skirt_distance = 2
 skirt_height = 3
 skirts = 1
+slice_closing_radius = 0.049
 small_perimeter_speed = 25
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
@@ -75,6 +78,7 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
+support_material_auto = 1
 support_material_buildplate_only = 0
 support_material_contact_distance = 0.15
 support_material_enforce_layers = 0
@@ -93,13 +97,16 @@ support_material_threshold = 45
 support_material_with_sheath = 0
 support_material_xy_spacing = 60%
 thin_walls = 0
-threads = 12
+threads = 16
+top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 45
 top_solid_layers = 3
-travel_speed = 200
+top_solid_min_thickness = 0.6
+travel_speed = 150
 wipe_tower = 0
 wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
 wipe_tower_rotation_angle = 0
 wipe_tower_width = 60
 wipe_tower_x = 180

PrusaSlicer/printer/Creality Ender-3 Stock.ini

@@ -1,6 +1,6 @@
-# generated by PrusaSlicer 2.1.0+win64 on 2019-10-14 at 02:15:33 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-03-28 at 01:26:01 UTC
+bed_custom_model = 
 bed_custom_texture = 
-bed_custom_model =
 bed_shape = 0x0,220x0,220x220,0x220
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
 between_objects_gcode = 
@@ -19,8 +19,8 @@ host_type = octoprint
 inherits = Creality ENDER-3
 layer_gcode = ;AFTER_LAYER_CHANGE\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
 machine_max_acceleration_e = 5000,5000
-machine_max_acceleration_extruding = 1250,1250
-machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_extruding = 1000,1250
+machine_max_acceleration_retracting = 1000,1250
 machine_max_acceleration_x = 1000,960
 machine_max_acceleration_y = 1000,960
 machine_max_acceleration_z = 1000,1000
@@ -49,8 +49,8 @@ printer_vendor =
 printhost_apikey = 
 printhost_cafile = 
 remaining_times = 0
-retract_before_travel = 1.5
-retract_before_wipe = 60%
+retract_before_travel = 2
+retract_before_wipe = 70%
 retract_layer_change = 1
 retract_length = 6.8
 retract_length_toolchange = 4