More 0.6 nozzle profiles

PrusaSlicer/print/0.15mm 0.6 nozzle MK3 1.0mm Extrusion.ini

@@ -0,0 +1,114 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-04-06 at 02:01:19 UTC
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 6
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+draft_shield = 0
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 1
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 83
+inherits = 0.30mm 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 83
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1
+perimeter_speed = 45
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 1
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1
+top_solid_infill_speed = 40
+top_solid_layers = 7
+top_solid_min_thickness = 0.6
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

PrusaSlicer/print/0.15mm 0.6 nozzle MK3.ini

@@ -0,0 +1,114 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-04-06 at 02:00:35 UTC
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 6
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+draft_shield = 0
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.65
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 83
+inherits = 0.30mm 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 83
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 1
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 40
+top_solid_layers = 7
+top_solid_min_thickness = 0.6
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

PrusaSlicer/print/0.20mm 0.6 nozzle MK3 1.0mm Extrusion.ini

@@ -0,0 +1,114 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-04-06 at 02:02:07 UTC
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 5
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+draft_shield = 0
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 1
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.65
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 62
+inherits = 0.30mm 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 62
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1
+perimeter_speed = 40
+perimeters = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 1
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1
+top_solid_infill_speed = 40
+top_solid_layers = 5
+top_solid_min_thickness = 0.6
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

PrusaSlicer/print/0.20mm 0.6 nozzle MK3.ini

@@ -0,0 +1,114 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-04-06 at 01:58:05 UTC
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 5
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+draft_shield = 0
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.65
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 62
+inherits = 0.30mm 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 62
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 1
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 40
+top_solid_layers = 5
+top_solid_min_thickness = 0.6
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

PrusaSlicer/print/0.25mm 0.6 nozzle MK3 1.0mm Extrusion.ini

@@ -0,0 +1,114 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-04-06 at 02:03:24 UTC
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 32
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+draft_shield = 0
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 1
+external_perimeter_speed = 32
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 1
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 1
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 32
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.65
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 50
+inherits = 0.30mm 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.25
+max_print_speed = 50
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 1
+perimeter_speed = 32
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 1
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 1
+solid_infill_speed = 32
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 1
+top_solid_infill_speed = 32
+top_solid_layers = 4
+top_solid_min_thickness = 0.6
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

PrusaSlicer/print/0.25mm 0.6 nozzle MK3.ini

@@ -0,0 +1,114 @@
+# generated by PrusaSlicer 2.2.0+win64 on 2020-04-06 at 01:57:38 UTC
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0.5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+draft_shield = 0
+elefant_foot_compensation = 0.2
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 15%
+fill_pattern = gyroid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.3
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 1000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.65
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 50
+inherits = 0.30mm 0.6 nozzle MK3
+interface_shells = 0
+layer_height = 0.25
+max_print_speed = 50
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}{layer_height}mm_{total_weight}g_{nozzle_diameter[0]}n_{printer_model}_{print_time}.gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 1
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 45
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 16
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 40
+top_solid_layers = 4
+top_solid_min_thickness = 0.6
+travel_speed = 180
+wipe_tower = 1
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

PrusaSlicer/print/0.30mm 0.6 nozzle MK3.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-30 at 15:43:09 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-04-06 at 01:57:06 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -17,13 +17,13 @@ dont_support_bridges = 1
 draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.61
+external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
@@ -37,12 +37,12 @@ gcode_label_objects = 0
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.7
+infill_extrusion_width = 0.65
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 50
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 42
+inherits = 
 interface_shells = 0
 layer_height = 0.3
 max_print_speed = 50
@@ -56,7 +56,7 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 45
+perimeter_speed = 42
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -73,7 +73,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.65
-solid_infill_speed = 50
+solid_infill_speed = 42
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -100,7 +100,7 @@ thin_walls = 0
 threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 50
+top_solid_infill_speed = 42
 top_solid_layers = 3
 top_solid_min_thickness = 0.6
 travel_speed = 180

PrusaSlicer/print/0.35mm 0.6 nozzle MK3.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-30 at 15:43:03 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-04-06 at 01:56:11 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 3
@@ -17,13 +17,13 @@ dont_support_bridges = 1
 draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.61
+external_perimeter_extrusion_width = 0.65
 external_perimeter_speed = 35
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
@@ -31,18 +31,18 @@ first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.3
 first_layer_speed = 20
-gap_fill_speed = 40
+gap_fill_speed = 36
 gcode_comments = 0
 gcode_label_objects = 0
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.7
+infill_extrusion_width = 0.65
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 40
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 36
+inherits = 0.30mm 0.6 nozzle MK3
 interface_shells = 0
 layer_height = 0.35
 max_print_speed = 50
@@ -56,7 +56,7 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 43
+perimeter_speed = 36
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -73,7 +73,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.65
-solid_infill_speed = 43
+solid_infill_speed = 36
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -91,7 +91,7 @@ support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
-support_material_speed = 50
+support_material_speed = 42
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
@@ -100,7 +100,7 @@ thin_walls = 0
 threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 47
+top_solid_infill_speed = 36
 top_solid_layers = 3
 top_solid_min_thickness = 0.6
 travel_speed = 180

PrusaSlicer/print/0.40mm 0.6 nozzle MK3.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-30 at 15:42:58 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-04-06 at 01:55:34 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 2
@@ -17,13 +17,13 @@ dont_support_bridges = 1
 draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 35
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 31
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
@@ -31,21 +31,21 @@ first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.4
 first_layer_speed = 20
-gap_fill_speed = 38
+gap_fill_speed = 31
 gcode_comments = 0
 gcode_label_objects = 0
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.7
+infill_extrusion_width = 0.65
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 35
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 31
+inherits = 0.30mm 0.6 nozzle MK3
 interface_shells = 0
 layer_height = 0.4
-max_print_speed = 50
+max_print_speed = 40
 max_volumetric_speed = 0
 min_skirt_length = 4
 notes = 
@@ -56,7 +56,7 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 38
+perimeter_speed = 31
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -73,7 +73,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.65
-solid_infill_speed = 38
+solid_infill_speed = 31
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -91,7 +91,7 @@ support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
-support_material_speed = 50
+support_material_speed = 38
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
@@ -100,7 +100,7 @@ thin_walls = 0
 threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 41
+top_solid_infill_speed = 31
 top_solid_layers = 3
 top_solid_min_thickness = 0.6
 travel_speed = 180

PrusaSlicer/print/0.45mm 0.6 nozzle MK3.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+win64 on 2020-03-30 at 15:42:54 UTC
+# generated by PrusaSlicer 2.2.0+win64 on 2020-04-06 at 01:54:49 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 2
@@ -6,7 +6,7 @@ bottom_solid_min_thickness = 0.5
 bridge_acceleration = 1000
 bridge_angle = 0
 bridge_flow_ratio = 0.95
-bridge_speed = 30
+bridge_speed = 28
 brim_width = 0
 clip_multipart_objects = 1
 compatible_printers = 
@@ -17,13 +17,13 @@ dont_support_bridges = 1
 draft_shield = 0
 elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
-external_perimeter_extrusion_width = 0.61
-external_perimeter_speed = 36
+external_perimeter_extrusion_width = 0.65
+external_perimeter_speed = 28
 external_perimeters_first = 0
 extra_perimeters = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
-extrusion_width = 0.67
+extrusion_width = 0.65
 fill_angle = 45
 fill_density = 15%
 fill_pattern = gyroid
@@ -31,21 +31,21 @@ first_layer_acceleration = 1000
 first_layer_extrusion_width = 0.65
 first_layer_height = 0.4
 first_layer_speed = 20
-gap_fill_speed = 33
+gap_fill_speed = 28
 gcode_comments = 0
 gcode_label_objects = 0
 infill_acceleration = 1000
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 0.7
+infill_extrusion_width = 0.65
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 31
-inherits = 0.20mm FAST 0.6 nozzle MK3
+infill_speed = 28
+inherits = 0.30mm 0.6 nozzle MK3
 interface_shells = 0
 layer_height = 0.45
-max_print_speed = 50
+max_print_speed = 40
 max_volumetric_speed = 0
 min_skirt_length = 4
 notes = 
@@ -56,7 +56,7 @@ overhangs = 1
 perimeter_acceleration = 800
 perimeter_extruder = 1
 perimeter_extrusion_width = 0.65
-perimeter_speed = 33
+perimeter_speed = 28
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -73,7 +73,7 @@ solid_infill_below_area = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0.65
-solid_infill_speed = 34
+solid_infill_speed = 28
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -91,7 +91,7 @@ support_material_interface_spacing = 0.2
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2
-support_material_speed = 50
+support_material_speed = 35
 support_material_synchronize_layers = 0
 support_material_threshold = 45
 support_material_with_sheath = 0
@@ -100,7 +100,7 @@ thin_walls = 0
 threads = 16
 top_fill_pattern = rectilinear
 top_infill_extrusion_width = 0.6
-top_solid_infill_speed = 36
+top_solid_infill_speed = 28
 top_solid_layers = 3
 top_solid_min_thickness = 0.6
 travel_speed = 180