Slic3rPE

README.md

@@ -1,2 +1,11 @@
 # Ender3
 Supercharge your Ender3 with Guides, Mods and Addons
+
+## Slic3rPE
+1. Download Slic3rPE from: https://github.com/prusa3d/Slic3r/releases
+2. Start and configure Slic3rPE (Wizard)
+3. Close Slic3rPE
+4. Open "C:\Users\Public\Documents\Prusa3D\Slic3r settings xxxx"
+5. Copy GitHub Slic3rPE subfolders "printer", "filament", "print"
+6. Done
+

Slic3rPE/filament/FILAFLEX 82A Original.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-13 at 06:00:30
+bed_temperature = 0
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1
+cooling = 1
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #00CA0A
+filament_cost = 35
+filament_density = 1.2
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 1.5
+filament_notes = "FILAFLEX 82A"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = FLEX
+filament_unloading_speed = 90
+first_layer_bed_temperature = 0
+first_layer_temperature = 220
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 20
+slowdown_below_layer_time = 5
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+temperature = 215

Slic3rPE/filament/FILAFLEX 95A.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.39.2+win64 on 2018-06-06 at 18:35:48
+bed_temperature = 0
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1
+cooling = 1
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.15
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #00CA0A
+filament_cost = 35
+filament_density = 1.15
+filament_diameter = 1.75
+filament_max_volumetric_speed = 1.5
+filament_notes = "FILAFLEX 95A"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = FLEX
+first_layer_bed_temperature = 0
+first_layer_temperature = 235
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 20
+slowdown_below_layer_time = 5
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+temperature = 228

Slic3rPE/filament/FilaFarm ABS Volcano.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:38:08
+bed_temperature = 115
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.04
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #3A80CA
+filament_cost = 19
+filament_density = 1.04
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 32
+filament_notes = "FilaFarm ABS"
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = ABS
+filament_unloading_speed = 90
+first_layer_bed_temperature = 110
+first_layer_temperature = 250
+inherits = Prusa ABS
+max_fan_speed = 25
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 25
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 250

Slic3rPE/filament/FilaFarm ABS.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:39:09
+bed_temperature = 115
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.04
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #3A80CA
+filament_cost = 19
+filament_density = 1.04
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 11
+filament_notes = "FilaFarm ABS"
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = ABS
+filament_unloading_speed = 90
+first_layer_bed_temperature = 110
+first_layer_temperature = 250
+inherits = Prusa ABS
+max_fan_speed = 25
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 25
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 250

Slic3rPE/filament/Generic ABS.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:45:46
+bed_temperature = 110
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #3A80CA
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 11
+filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = ABS
+filament_unloading_speed = 90
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+inherits = Generic ABS
+max_fan_speed = 25
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 25
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 255

Slic3rPE/filament/Generic PET.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:44:31
+bed_temperature = 90
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 8
+filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PET
+filament_unloading_speed = 90
+first_layer_bed_temperature = 85
+first_layer_temperature = 230
+inherits = Generic PET
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 15
+slowdown_below_layer_time = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 240

Slic3rPE/filament/Generic PLA.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:44:39
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 15
+filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unloading_speed = 90
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+inherits = Generic PLA
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 15
+slowdown_below_layer_time = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 210

Slic3rPE/filament/Generic ABS Volcano.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-15 at 02:30:39
+bed_temperature = 110
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #3A80CA
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 32
+filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = ABS
+filament_unloading_speed = 90
+first_layer_bed_temperature = 110
+first_layer_temperature = 255
+inherits = Generic ABS
+max_fan_speed = 25
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 25
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 255

Slic3rPE/filament/Generic PET Volcano.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.0+win64 on 2018-06-18 at 18:46:12
+bed_temperature = 90
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 24
+filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PET
+filament_unloading_speed = 90
+first_layer_bed_temperature = 85
+first_layer_temperature = 230
+inherits = Generic PET
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 15
+slowdown_below_layer_time = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 240

Slic3rPE/filament/Generic PLA Volcano.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1-beta+win64 on 2018-07-13 at 19:53:52
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_cost = 19
+filament_density = 1.25
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 28
+filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unloading_speed = 90
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+inherits = Generic PLA
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 15
+slowdown_below_layer_time = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 210

Slic3rPE/filament/HDGlass PETG Volcano.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:38:01
+bed_temperature = 75
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.02
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_cost = 39
+filament_density = 1.27
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 24
+filament_notes = HDGlass
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PET
+filament_unloading_speed = 90
+first_layer_bed_temperature = 70
+first_layer_temperature = 220
+inherits = Prusa PET
+max_fan_speed = 80
+min_fan_speed = 50
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 220

Slic3rPE/filament/HDGlass PETG.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:33:24
+bed_temperature = 75
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.02
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_cost = 39
+filament_density = 1.27
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 24
+filament_notes = HDGlass
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PET
+filament_unloading_speed = 90
+first_layer_bed_temperature = 70
+first_layer_temperature = 220
+inherits = Prusa PET
+max_fan_speed = 80
+min_fan_speed = 50
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 220

Slic3rPE/filament/PrimaSELECT PETG Volcano.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:37:42
+bed_temperature = 85
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #0080C0
+filament_cost = 25
+filament_density = 1.25
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 24
+filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nprimaSELECT PETG"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PET
+filament_unloading_speed = 90
+first_layer_bed_temperature = 80
+first_layer_temperature = 225
+inherits = 
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 230

Slic3rPE/filament/PrimaSELECT PETG.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:41:04
+bed_temperature = 85
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #0080C0
+filament_cost = 25
+filament_density = 1.25
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 8
+filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nprimaSELECT PETG"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PET
+filament_unloading_speed = 90
+first_layer_bed_temperature = 80
+first_layer_temperature = 225
+inherits = 
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 20
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 230

Slic3rPE/filament/SAKATA ABS Volcano.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:37:04
+bed_temperature = 115
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.01
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #3A80CA
+filament_cost = 19
+filament_density = 1.04
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 32
+filament_notes = "SAKATA ABS"
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = ABS
+filament_unloading_speed = 90
+first_layer_bed_temperature = 110
+first_layer_temperature = 245
+inherits = Prusa ABS
+max_fan_speed = 25
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 25
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 245

Slic3rPE/filament/SAKATA ABS.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:39:00
+bed_temperature = 115
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.01
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #3A80CA
+filament_cost = 19
+filament_density = 1.04
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 11
+filament_notes = "SAKATA ABS"
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = ABS
+filament_unloading_speed = 90
+first_layer_bed_temperature = 110
+first_layer_temperature = 245
+inherits = Prusa ABS
+max_fan_speed = 25
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 25
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 245

Slic3rPE/filament/SUNLU ABS Volcano.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:34:08
+bed_temperature = 115
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #3A80CA
+filament_cost = 19
+filament_density = 1.04
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 32
+filament_notes = "SUNLU ABS"
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = ABS
+filament_unloading_speed = 90
+first_layer_bed_temperature = 110
+first_layer_temperature = 240
+inherits = Prusa ABS
+max_fan_speed = 25
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 25
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 240

Slic3rPE/filament/SUNLU ABS.ini

@@ -0,0 +1,33 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 04:38:55
+bed_temperature = 115
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #3A80CA
+filament_cost = 19
+filament_density = 1.04
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_max_volumetric_speed = 11
+filament_notes = "SAKATA ABS"
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = ABS
+filament_unloading_speed = 90
+first_layer_bed_temperature = 110
+first_layer_temperature = 240
+inherits = Prusa ABS
+max_fan_speed = 25
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 25
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 240

Slic3rPE/print/0.04mm ULTRA DETAIL Ender3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:50:05
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 20
+bridge_acceleration = 300
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 25%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 40
+inherits = 
+interface_shells = 0
+layer_height = 0.04
+max_print_speed = 80
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 8
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 30
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 20
+top_solid_layers = 25
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.05mm Ender3 Volcano.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:57:57
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 12
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.84
+first_layer_height = 0.4
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 35
+inherits = 
+interface_shells = 0
+layer_height = 0.05
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 30
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 35
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 30
+top_solid_layers = 20
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.08mm VERY DETAIL Ender3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:49:33
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 9
+bridge_acceleration = 300
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 25%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 40
+inherits = 
+interface_shells = 0
+layer_height = 0.08
+max_print_speed = 80
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 8
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 30
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 30
+top_solid_layers = 12
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.10mm Ender3 Volcano.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:58:02
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 7
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.84
+first_layer_height = 0.4
+first_layer_speed = 25
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 120
+inherits = 
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 200
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 120
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 45
+top_solid_layers = 10
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.12mm DETAIL Ender3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:49:24
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 7
+bridge_acceleration = 300
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+inherits = 
+interface_shells = 0
+layer_height = 0.12
+max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 8
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 45
+top_solid_layers = 8
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.15mm Ender3 Volcano.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:48:25
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 5
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.84
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 120
+inherits = 
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 133
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 120
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 45
+top_solid_layers = 7
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.16mm OPTIMAL Ender3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:49:15
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 6
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 80
+inherits = 
+interface_shells = 0
+layer_height = 0.16
+max_print_speed = 110
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 8
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 80
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 45
+top_solid_layers = 6
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.20mm Ender3 Volcano.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:44:57
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 4
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.84
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 100
+inherits = 
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 100
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 45
+top_solid_layers = 5
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.20mm NORMAL Ender3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:47:10
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 5
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 80
+inherits = 
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 90
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 8
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 80
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 45
+top_solid_layers = 5
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.24mm FAST Ender3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:48:33
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 4
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 74
+inherits = 
+interface_shells = 0
+layer_height = 0.24
+max_print_speed = 75
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 8
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 74
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 45
+top_solid_layers = 4
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.25mm Ender3 Volcano.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:42:52
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 4
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.84
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 80
+inherits = 
+interface_shells = 0
+layer_height = 0.25
+max_print_speed = 80
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 80
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 45
+top_solid_layers = 5
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.28mm VERY FAST Ender3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:50:50
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 4
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 64
+inherits = 
+interface_shells = 0
+layer_height = 0.28
+max_print_speed = 64
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 8
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 64
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 45
+top_solid_layers = 4
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.30mm Ender3 Volcano.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:42:47
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 3
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.84
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 67
+inherits = 
+interface_shells = 0
+layer_height = 0.3
+max_print_speed = 67
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 67
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 45
+top_solid_layers = 3
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.32mm ULTRA FAST Ender3.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 02:52:49
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 3
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*PRINTER_NOT_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 56
+inherits = 
+interface_shells = 0
+layer_height = 0.32
+max_print_speed = 56
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 8
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 56
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 45
+top_solid_layers = 3
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.35mm Ender3 Volcano.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:41:27
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 3
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.84
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 58
+inherits = 
+interface_shells = 0
+layer_height = 0.35
+max_print_speed = 64
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 58
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 45
+top_solid_layers = 3
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.40mm Ender3 Volcano.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:41:33
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 3
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.84
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 50
+inherits = 
+interface_shells = 0
+layer_height = 0.4
+max_print_speed = 55
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 45
+top_solid_layers = 3
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.45mm Ender3 Volcano.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:41:37
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 2
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.84
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 45
+inherits = 
+interface_shells = 0
+layer_height = 0.45
+max_print_speed = 50
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 45
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 45
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 45
+top_solid_layers = 2
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.50mm Ender3 Volcano.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:36:52
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 2
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.84
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 40
+inherits = 
+interface_shells = 0
+layer_height = 0.5
+max_print_speed = 45
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 45
+top_solid_layers = 2
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.55mm Ender3 Volcano.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:33:28
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 2
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 35
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.84
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 36
+inherits = 
+interface_shells = 0
+layer_height = 0.55
+max_print_speed = 41
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 36
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 36
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 41
+top_solid_layers = 2
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.60mm Ender3 Volcano.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:36:25
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 2
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 33
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.84
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 33
+inherits = 
+interface_shells = 0
+layer_height = 0.6
+max_print_speed = 36
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 33
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 10
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 33
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 36
+top_solid_layers = 2
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

Slic3rPE/print/0.65mm Ender3 Volcano.ini

@@ -0,0 +1,107 @@
+# generated by Slic3r Prusa Edition 1.40.1+win64 on 2018-08-21 at 03:31:35
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 2
+bridge_acceleration = 500
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_CREALITY.*/ and printer_notes=~/.*PRINTER_MODEL_ENDER3.*/ and nozzle_diameter[0]==0.8 and printer_notes=~/.*PRINTER_HAS_VOLCANO.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.9
+external_perimeter_speed = 30
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.9
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.84
+first_layer_height = 0.4
+first_layer_speed = 30
+gap_fill_speed = 30
+gcode_comments = 0
+infill_acceleration = 500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.9
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 30
+inherits = 
+interface_shells = 0
+layer_height = 0.65
+max_print_speed = 30
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 20
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]_[filament_type][layer_height]mm.gcode
+overhangs = 0
+perimeter_acceleration = 500
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.9
+perimeter_speed = 30
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 2
+skirts = 1
+small_perimeter_speed = 10
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.9
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 1
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.7
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 45
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 12
+top_infill_extrusion_width = 0.8
+top_solid_infill_speed = 30
+top_solid_layers = 2
+travel_speed = 170
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0