Fix missing G28 for home Z and prime at Y

README.md

@@ -13,6 +13,7 @@ Discussion Groups:
 These profiles are based on a quality/speed balance (Universal).
 Good prints without sacrifice the speed.
 Make sure you have a good leveled printer and bed.
+**NOTE:** Fine tune the start gcode for your printer! This is very important since i can't provide a all case profile for every modification and printer.
 
 Modify at your needs.
 

Slic3rPE/printer/Creality Ender-3 DD Volcano 0.6 Nozzle+BLTouch RECALL.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.41.2+win64 on 2018-12-16 at 17:09:55
+# generated by Slic3r Prusa Edition 1.41.2+win64 on 2018-12-16 at 17:12:44
 bed_shape = 0x0,220x0,220x220,0x220
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
 between_objects_gcode = 
@@ -36,13 +36,13 @@ max_print_height = 240
 min_layer_height = 0.1
 nozzle_diameter = 0.6
 parking_pos_retraction = 92
-print_host = 
+print_host = 192.168.1.35
 printer_model = 
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_VOLCANO\nPRINTER_HAS_DIRECT_DRIVE\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\nMAX_VOLUMETRIC_25\nMAX_SPEED_85
 printer_settings_id = 
 printer_variant = 
 printer_vendor = 
-printhost_apikey = 
+printhost_apikey = 852FD1ED19874F178DF73B325E3E8640
 printhost_cafile = 
 remaining_times = 1
 retract_before_travel = 1

Slic3rPE/printer/Creality Ender-3 DD Volcano 0.6 Nozzle+BLTouch.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.41.1+win64 on 2018-11-11 at 06:07:51
+# generated by Slic3r Prusa Edition 1.41.2+win64 on 2018-12-16 at 17:12:38
 bed_shape = 0x0,220x0,220x220,0x220
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0.0\n;Layer [layer_num]\n;[layer_z]mm\n;Printing layer [layer_num] at [layer_z]mm\n\n
 between_objects_gcode = 
@@ -36,13 +36,13 @@ max_print_height = 240
 min_layer_height = 0.1
 nozzle_diameter = 0.6
 parking_pos_retraction = 92
-print_host = 
+print_host = 192.168.1.35
 printer_model = 
 printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_CREALITY\nPRINTER_MODEL_ENDER3\nPRINTER_HAS_VOLCANO\nPRINTER_HAS_DIRECT_DRIVE\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\nMAX_VOLUMETRIC_25\nMAX_SPEED_85
 printer_settings_id = 
 printer_variant = 
 printer_vendor = 
-printhost_apikey = 
+printhost_apikey = 852FD1ED19874F178DF73B325E3E8640
 printhost_cafile = 
 remaining_times = 1
 retract_before_travel = 1