update English firmware to 2019-04-29 version

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/BlinkM.cpp

@@ -1,29 +0,0 @@
-/*
-  BlinkM.cpp - Library for controlling a BlinkM over i2c
-  Created by Tim Koster, August 21 2013.
-*/
-#include "Marlin.h"
-#ifdef BLINKM
-
-#if (ARDUINO >= 100)
-  # include "Arduino.h"
-#else
-  # include "WProgram.h"
-#endif
-
-#include "BlinkM.h"
-
-void SendColors(byte red, byte grn, byte blu)
-{
-  Wire.begin(); 
-  Wire.beginTransmission(0x09);
-  Wire.write('o');                    //to disable ongoing script, only needs to be used once
-  Wire.write('n');
-  Wire.write(red);
-  Wire.write(grn);
-  Wire.write(blu);
-  Wire.endTransmission();
-}
-
-#endif //BLINKM
-

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/BlinkM.h

@@ -1,14 +0,0 @@
-/*
-  BlinkM.h
-  Library header file for BlinkM library
- */
-#if (ARDUINO >= 100)
-  # include "Arduino.h"
-#else
-  # include "WProgram.h"
-#endif
-
-#include "Wire.h"
-
-void SendColors(byte red, byte grn, byte blu);
-

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/Conditionals.h

@@ -0,0 +1,27 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Conditionals.h
+ * OBSOLETE: Replaced by Conditionals_LCD.h and Conditionals_post.h
+ */
+#error "Old configurations? Please delete all #include lines from Configuration.h and Configuration_adv.h."

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/Conditionals_LCD.h

@@ -0,0 +1,480 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Conditionals_LCD.h
+ * Conditionals that need to be set before Configuration_adv.h or pins.h
+ */
+
+#ifndef CONDITIONALS_LCD_H // Get the LCD defines which are needed first
+#define CONDITIONALS_LCD_H
+
+  #define LCD_HAS_DIRECTIONAL_BUTTONS (BUTTON_EXISTS(UP) || BUTTON_EXISTS(DWN) || BUTTON_EXISTS(LFT) || BUTTON_EXISTS(RT))
+
+  #if ENABLED(CARTESIO_UI)
+
+    #define DOGLCD
+    #define ULTIPANEL
+    #define DEFAULT_LCD_CONTRAST 90
+    #define LCD_CONTRAST_MIN 60
+    #define LCD_CONTRAST_MAX 140
+
+  #elif ENABLED(MAKRPANEL)
+
+    #define U8GLIB_ST7565_64128N
+
+  #elif ENABLED(ANET_KEYPAD_LCD)
+
+    #define REPRAPWORLD_KEYPAD
+    #define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
+    #define ADC_KEYPAD
+    #define ADC_KEY_NUM 8
+    #define ULTIPANEL
+
+    // this helps to implement ADC_KEYPAD menus
+    #define ENCODER_PULSES_PER_STEP 1
+    #define ENCODER_STEPS_PER_MENU_ITEM 1
+    #define REVERSE_MENU_DIRECTION
+
+  #elif ENABLED(ANET_FULL_GRAPHICS_LCD)
+
+    #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+
+  #elif ENABLED(BQ_LCD_SMART_CONTROLLER)
+
+    #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+    #define LONG_FILENAME_HOST_SUPPORT
+
+  #elif ENABLED(miniVIKI) || ENABLED(VIKI2) || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+
+    #define ULTRA_LCD  //general LCD support, also 16x2
+    #define DOGLCD  // Support for SPI LCD 128x64 (Controller ST7565R graphic Display Family)
+    #define ULTIMAKERCONTROLLER //as available from the Ultimaker online store.
+
+    #if ENABLED(miniVIKI)
+      #define LCD_CONTRAST_MIN      75
+      #define LCD_CONTRAST_MAX     115
+      #define DEFAULT_LCD_CONTRAST  95
+      #define U8GLIB_ST7565_64128N
+    #elif ENABLED(VIKI2)
+      #define LCD_CONTRAST_MIN       0
+      #define LCD_CONTRAST_MAX     255
+      #define DEFAULT_LCD_CONTRAST 140
+      #define U8GLIB_ST7565_64128N
+    #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+      #define LCD_CONTRAST_MIN      90
+      #define LCD_CONTRAST_MAX     130
+      #define DEFAULT_LCD_CONTRAST 110
+      #define U8GLIB_LM6059_AF
+      #define SD_DETECT_INVERTED
+    #endif
+
+  #elif ENABLED(OLED_PANEL_TINYBOY2)
+
+    #define U8GLIB_SSD1306
+    #define ULTIPANEL
+    #define REVERSE_ENCODER_DIRECTION
+    #define REVERSE_MENU_DIRECTION
+
+  #elif ENABLED(RA_CONTROL_PANEL)
+
+    #define LCD_I2C_TYPE_PCA8574
+    #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
+    #define ULTIPANEL
+
+  #elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
+
+    #define DOGLCD
+    #define U8GLIB_ST7920
+    #define ULTIPANEL
+
+  #elif ENABLED(CR10_STOCKDISPLAY)
+
+    #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+    #ifndef ST7920_DELAY_1
+      #define ST7920_DELAY_1 DELAY_2_NOP
+    #endif
+    #ifndef ST7920_DELAY_2
+      #define ST7920_DELAY_2 DELAY_2_NOP
+    #endif
+    #ifndef ST7920_DELAY_3
+      #define ST7920_DELAY_3 DELAY_2_NOP
+    #endif
+
+  #elif ENABLED(MKS_12864OLED)
+
+    #define REPRAP_DISCOUNT_SMART_CONTROLLER
+    #define U8GLIB_SH1106
+
+  #elif ENABLED(MKS_MINI_12864)
+
+    #define MINIPANEL
+
+  #endif
+
+  #if ENABLED(MAKRPANEL) || ENABLED(MINIPANEL)
+    #define DOGLCD
+    #define ULTIPANEL
+    #define DEFAULT_LCD_CONTRAST 17
+  #endif
+
+  // Generic support for SSD1306 / SH1106 OLED based LCDs.
+  #if ENABLED(U8GLIB_SSD1306) || ENABLED(U8GLIB_SH1106)
+    #define ULTRA_LCD  //general LCD support, also 16x2
+    #define DOGLCD  // Support for I2C LCD 128x64 (Controller SSD1306 / SH1106 graphic Display Family)
+  #endif
+
+  #if ENABLED(PANEL_ONE) || ENABLED(U8GLIB_SH1106)
+
+    #define ULTIMAKERCONTROLLER
+
+  #elif ENABLED(MAKEBOARD_MINI_2_LINE_DISPLAY_1602)
+
+    #define REPRAP_DISCOUNT_SMART_CONTROLLER
+    #define LCD_WIDTH 16
+    #define LCD_HEIGHT 2
+
+  #endif
+
+  #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) || ENABLED(LCD_FOR_MELZI)
+    #define DOGLCD
+    #define U8GLIB_ST7920
+    #define REPRAP_DISCOUNT_SMART_CONTROLLER
+  #endif
+
+  #if ENABLED(ULTIMAKERCONTROLLER)              \
+   || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) \
+   || ENABLED(G3D_PANEL)                        \
+   || ENABLED(RIGIDBOT_PANEL)
+    #define ULTIPANEL
+  #endif
+
+  #if ENABLED(REPRAPWORLD_KEYPAD)
+    #define NEWPANEL
+    #if ENABLED(ULTIPANEL) && !defined(REPRAPWORLD_KEYPAD_MOVE_STEP)
+      #define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0
+    #endif
+  #endif
+
+  /**
+   * I2C PANELS
+   */
+
+  #if ENABLED(LCD_I2C_SAINSMART_YWROBOT)
+
+    // Note: This controller requires F.Malpartida's LiquidCrystal_I2C library
+    // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
+
+    #define LCD_I2C_TYPE_PCF8575
+    #define LCD_I2C_ADDRESS 0x27   // I2C Address of the port expander
+    #define ULTIPANEL
+
+  #elif ENABLED(LCD_I2C_PANELOLU2)
+
+    // PANELOLU2 LCD with status LEDs, separate encoder and click inputs
+
+    #define LCD_I2C_TYPE_MCP23017
+    #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
+    #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD
+    #define ULTIPANEL
+
+  #elif ENABLED(LCD_I2C_VIKI)
+
+    /**
+     * Panucatt VIKI LCD with status LEDs, integrated click & L/R/U/P buttons, separate encoder inputs
+     *
+     * This uses the LiquidTWI2 library v1.2.3 or later ( https://github.com/lincomatic/LiquidTWI2 )
+     * Make sure the LiquidTWI2 directory is placed in the Arduino or Sketchbook libraries subdirectory.
+     * Note: The pause/stop/resume LCD button pin should be connected to the Arduino
+     *       BTN_ENC pin (or set BTN_ENC to -1 if not used)
+     */
+    #define LCD_I2C_TYPE_MCP23017
+    #define LCD_I2C_ADDRESS 0x20 // I2C Address of the port expander
+    #define LCD_USE_I2C_BUZZER //comment out to disable buzzer on LCD (requires LiquidTWI2 v1.2.3 or later)
+    #define ULTIPANEL
+
+    #define ENCODER_FEEDRATE_DEADZONE 4
+
+    #define STD_ENCODER_PULSES_PER_STEP 1
+    #define STD_ENCODER_STEPS_PER_MENU_ITEM 2
+
+  #elif ENABLED(G3D_PANEL)
+
+    #define STD_ENCODER_PULSES_PER_STEP 2
+    #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
+
+  #elif ENABLED(miniVIKI) || ENABLED(VIKI2) \
+     || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
+     || ENABLED(OLED_PANEL_TINYBOY2) \
+     || ENABLED(BQ_LCD_SMART_CONTROLLER) \
+     || ENABLED(LCD_I2C_PANELOLU2) \
+     || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
+    #define STD_ENCODER_PULSES_PER_STEP 4
+    #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
+  #endif
+
+  #ifndef STD_ENCODER_PULSES_PER_STEP
+    #define STD_ENCODER_PULSES_PER_STEP 5
+  #endif
+  #ifndef STD_ENCODER_STEPS_PER_MENU_ITEM
+    #define STD_ENCODER_STEPS_PER_MENU_ITEM 1
+  #endif
+  #ifndef ENCODER_PULSES_PER_STEP
+    #define ENCODER_PULSES_PER_STEP STD_ENCODER_PULSES_PER_STEP
+  #endif
+  #ifndef ENCODER_STEPS_PER_MENU_ITEM
+    #define ENCODER_STEPS_PER_MENU_ITEM STD_ENCODER_STEPS_PER_MENU_ITEM
+  #endif
+  #ifndef ENCODER_FEEDRATE_DEADZONE
+    #define ENCODER_FEEDRATE_DEADZONE 6
+  #endif
+
+  // Shift register panels
+  // ---------------------
+  // 2 wire Non-latching LCD SR from:
+  // https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/schematics#!shiftregister-connection
+
+  #if ENABLED(SAV_3DLCD)
+    #define SR_LCD_2W_NL    // Non latching 2 wire shift register
+    #define ULTIPANEL
+  #endif
+
+  #if ENABLED(DOGLCD) // Change number of lines to match the DOG graphic display
+    #ifndef LCD_WIDTH
+      #define LCD_WIDTH 22
+    #endif
+    #ifndef LCD_HEIGHT
+      #define LCD_HEIGHT 5
+    #endif
+  #endif
+
+  #if ENABLED(ULTIPANEL)
+    #define NEWPANEL  // Disable this if you actually have no click-encoder panel
+    #define ULTRA_LCD
+    #ifndef LCD_WIDTH
+      #define LCD_WIDTH 20
+    #endif
+    #ifndef LCD_HEIGHT
+      #define LCD_HEIGHT 4
+    #endif
+  #elif ENABLED(ULTRA_LCD)  // no panel but just LCD
+    #ifndef LCD_WIDTH
+      #define LCD_WIDTH 16
+    #endif
+    #ifndef LCD_HEIGHT
+      #define LCD_HEIGHT 2
+    #endif
+  #endif
+
+  #if ENABLED(DOGLCD)
+    /* Custom characters defined in font dogm_font_data_Marlin_symbols.h / Marlin_symbols.fon */
+    // \x00 intentionally skipped to avoid problems in strings
+    #define LCD_STR_REFRESH     "\x01"
+    #define LCD_STR_FOLDER      "\x02"
+    #define LCD_STR_ARROW_RIGHT "\x03"
+    #define LCD_STR_UPLEVEL     "\x04"
+    #define LCD_STR_CLOCK       "\x05"
+    #define LCD_STR_FEEDRATE    "\x06"
+    #define LCD_STR_BEDTEMP     "\x07"
+    #define LCD_STR_THERMOMETER "\x08"
+    #define LCD_STR_DEGREE      "\x09"
+
+    #define LCD_STR_SPECIAL_MAX '\x09'
+    // Maximum here is 0x1F because 0x20 is ' ' (space) and the normal charsets begin.
+    // Better stay below 0x10 because DISPLAY_CHARSET_HD44780_WESTERN begins here.
+
+    // Symbol characters
+    #define LCD_STR_FILAM_DIA   "\xf8"
+    #define LCD_STR_FILAM_MUL   "\xa4"
+  #else
+    /* Custom characters defined in the first 8 characters of the LCD */
+    #define LCD_BEDTEMP_CHAR     0x00  // Print only as a char. This will have 'unexpected' results when used in a string!
+    #define LCD_DEGREE_CHAR      0x01
+    #define LCD_STR_THERMOMETER "\x02" // Still used with string concatenation
+    #define LCD_UPLEVEL_CHAR     0x03
+    #define LCD_STR_REFRESH     "\x04"
+    #define LCD_STR_FOLDER      "\x05"
+    #define LCD_FEEDRATE_CHAR    0x06
+    #define LCD_CLOCK_CHAR       0x07
+    #define LCD_STR_ARROW_RIGHT ">"  /* from the default character set */
+  #endif
+
+  /**
+   * Default LCD contrast for dogm-like LCD displays
+   */
+  #if ENABLED(DOGLCD)
+
+    #define HAS_LCD_CONTRAST ( \
+        ENABLED(MAKRPANEL) \
+     || ENABLED(CARTESIO_UI) \
+     || ENABLED(VIKI2) \
+     || ENABLED(miniVIKI) \
+     || ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) \
+    )
+
+    #if HAS_LCD_CONTRAST
+      #ifndef LCD_CONTRAST_MIN
+        #define LCD_CONTRAST_MIN 0
+      #endif
+      #ifndef LCD_CONTRAST_MAX
+        #define LCD_CONTRAST_MAX 63
+      #endif
+      #ifndef DEFAULT_LCD_CONTRAST
+        #define DEFAULT_LCD_CONTRAST 32
+      #endif
+    #endif
+  #endif
+
+  // Boot screens
+  #if DISABLED(ULTRA_LCD)
+    #undef SHOW_BOOTSCREEN
+  #elif !defined(BOOTSCREEN_TIMEOUT)
+    #define BOOTSCREEN_TIMEOUT 2500
+  #endif
+
+  #define HAS_DEBUG_MENU ENABLED(LCD_PROGRESS_BAR_TEST)
+
+  // MK2 Multiplexer forces SINGLENOZZLE to be enabled
+  #if ENABLED(MK2_MULTIPLEXER)
+    #define SINGLENOZZLE
+  #endif
+
+  /**
+   * Extruders have some combination of stepper motors and hotends
+   * so we separate these concepts into the defines:
+   *
+   *  EXTRUDERS    - Number of Selectable Tools
+   *  HOTENDS      - Number of hotends, whether connected or separate
+   *  E_STEPPERS   - Number of actual E stepper motors
+   *  E_MANUAL     - Number of E steppers for LCD move options
+   *  TOOL_E_INDEX - Index to use when getting/setting the tool state
+   *
+   */
+  #if ENABLED(SINGLENOZZLE) || ENABLED(MIXING_EXTRUDER)         // One hotend, one thermistor, no XY offset
+    #define HOTENDS       1
+    #undef TEMP_SENSOR_1_AS_REDUNDANT
+    #undef HOTEND_OFFSET_X
+    #undef HOTEND_OFFSET_Y
+  #else                                                         // Two hotends
+    #define HOTENDS       EXTRUDERS
+    #if ENABLED(SWITCHING_NOZZLE) && !defined(HOTEND_OFFSET_Z)
+      #define HOTEND_OFFSET_Z { 0 }
+    #endif
+  #endif
+
+  #if ENABLED(SWITCHING_EXTRUDER) || ENABLED(MIXING_EXTRUDER)   // Unified E axis
+    #if ENABLED(MIXING_EXTRUDER)
+      #define E_STEPPERS  MIXING_STEPPERS
+    #else
+      #define E_STEPPERS  1                                     // One E stepper
+    #endif
+    #define E_MANUAL      1
+    #define TOOL_E_INDEX  0
+  #else
+    #define E_STEPPERS    EXTRUDERS
+    #define E_MANUAL      EXTRUDERS
+    #define TOOL_E_INDEX  current_block->active_extruder
+  #endif
+
+  /**
+   * DISTINCT_E_FACTORS affects how some E factors are accessed
+   */
+  #if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1
+    #define XYZE_N (XYZ + E_STEPPERS)
+    #define E_AXIS_N (E_AXIS + extruder)
+  #else
+    #undef DISTINCT_E_FACTORS
+    #define XYZE_N XYZE
+    #define E_AXIS_N E_AXIS
+  #endif
+
+  /**
+   * The BLTouch Probe emulates a servo probe
+   * and uses "special" angles for its state.
+   */
+  #if ENABLED(BLTOUCH)
+    #ifndef Z_ENDSTOP_SERVO_NR
+      #define Z_ENDSTOP_SERVO_NR 0
+    #endif
+    #ifndef NUM_SERVOS
+      #define NUM_SERVOS (Z_ENDSTOP_SERVO_NR + 1)
+    #endif
+    #undef DEACTIVATE_SERVOS_AFTER_MOVE
+    #if NUM_SERVOS == 1
+      #undef SERVO_DELAY
+      #define SERVO_DELAY { 50 }
+    #endif
+    #ifndef BLTOUCH_DELAY
+      #define BLTOUCH_DELAY 375
+    #endif
+    #undef Z_SERVO_ANGLES
+    #define Z_SERVO_ANGLES { BLTOUCH_DEPLOY, BLTOUCH_STOW }
+
+    #define BLTOUCH_DEPLOY    10
+    #define BLTOUCH_STOW      90
+    #define BLTOUCH_SELFTEST 120
+    #define BLTOUCH_RESET    160
+    #define _TEST_BLTOUCH(P) (READ(P##_PIN) != P##_ENDSTOP_INVERTING)
+
+    // Always disable probe pin inverting for BLTouch
+    #undef Z_MIN_PROBE_ENDSTOP_INVERTING
+    #define Z_MIN_PROBE_ENDSTOP_INVERTING false
+
+    #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
+      #undef Z_MIN_ENDSTOP_INVERTING
+      #define Z_MIN_ENDSTOP_INVERTING false
+      #define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN)
+    #else
+      #define TEST_BLTOUCH() _TEST_BLTOUCH(Z_MIN_PROBE)
+    #endif
+  #endif
+
+  /**
+   * Set a flag for a servo probe
+   */
+  #define HAS_Z_SERVO_ENDSTOP (defined(Z_ENDSTOP_SERVO_NR) && Z_ENDSTOP_SERVO_NR >= 0)
+
+  /**
+   * UBL has its own manual probing, so this just causes trouble.
+   */
+  #if ENABLED(AUTO_BED_LEVELING_UBL)
+    #undef PROBE_MANUALLY
+  #endif
+
+  /**
+   * Set a flag for any enabled probe
+   */
+  #define PROBE_SELECTED (ENABLED(PROBE_MANUALLY) || ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_ENDSTOP || ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE))
+
+  /**
+   * Clear probe pin settings when no probe is selected
+   */
+  #if !PROBE_SELECTED || ENABLED(PROBE_MANUALLY)
+    #undef Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+    #undef Z_MIN_PROBE_ENDSTOP
+  #endif
+
+  #define HAS_SOFTWARE_ENDSTOPS (ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS))
+  #define HAS_RESUME_CONTINUE (ENABLED(NEWPANEL) || ENABLED(EMERGENCY_PARSER))
+  #define HAS_COLOR_LEDS (ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED))
+
+#endif // CONDITIONALS_LCD_H

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/Conditionals_post.h

@@ -0,0 +1,926 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Conditionals_post.h
+ * Defines that depend on configuration but are not editable.
+ */
+
+#ifndef CONDITIONALS_POST_H
+#define CONDITIONALS_POST_H
+
+  #define IS_SCARA (ENABLED(MORGAN_SCARA) || ENABLED(MAKERARM_SCARA))
+  #define IS_KINEMATIC (ENABLED(DELTA) || IS_SCARA)
+  #define IS_CARTESIAN !IS_KINEMATIC
+
+  /**
+   * Axis lengths and center
+   */
+  #define X_MAX_LENGTH (X_MAX_POS - (X_MIN_POS))
+  #define Y_MAX_LENGTH (Y_MAX_POS - (Y_MIN_POS))
+  #define Z_MAX_LENGTH (Z_MAX_POS - (Z_MIN_POS))
+
+  // Defined only if the sanity-check is bypassed
+  #ifndef X_BED_SIZE
+    #define X_BED_SIZE X_MAX_LENGTH
+  #endif
+  #ifndef Y_BED_SIZE
+    #define Y_BED_SIZE Y_MAX_LENGTH
+  #endif
+
+  // Require 0,0 bed center for Delta and SCARA
+  #if IS_KINEMATIC
+    #define BED_CENTER_AT_0_0
+  #endif
+
+  // Define center values for future use
+  #if ENABLED(BED_CENTER_AT_0_0)
+    #define X_CENTER 0
+    #define Y_CENTER 0
+  #else
+    #define X_CENTER ((X_BED_SIZE) / 2)
+    #define Y_CENTER ((Y_BED_SIZE) / 2)
+  #endif
+  #define Z_CENTER ((Z_MIN_POS + Z_MAX_POS) / 2)
+
+  // Get the linear boundaries of the bed
+  #define X_MIN_BED (X_CENTER - (X_BED_SIZE) / 2)
+  #define X_MAX_BED (X_CENTER + (X_BED_SIZE) / 2)
+  #define Y_MIN_BED (Y_CENTER - (Y_BED_SIZE) / 2)
+  #define Y_MAX_BED (Y_CENTER + (Y_BED_SIZE) / 2)
+
+  /**
+   * CoreXY, CoreXZ, and CoreYZ - and their reverse
+   */
+  #define CORE_IS_XY (ENABLED(COREXY) || ENABLED(COREYX))
+  #define CORE_IS_XZ (ENABLED(COREXZ) || ENABLED(COREZX))
+  #define CORE_IS_YZ (ENABLED(COREYZ) || ENABLED(COREZY))
+  #define IS_CORE (CORE_IS_XY || CORE_IS_XZ || CORE_IS_YZ)
+  #if IS_CORE
+    #if CORE_IS_XY
+      #define CORE_AXIS_1 A_AXIS
+      #define CORE_AXIS_2 B_AXIS
+      #define NORMAL_AXIS Z_AXIS
+    #elif CORE_IS_XZ
+      #define CORE_AXIS_1 A_AXIS
+      #define NORMAL_AXIS Y_AXIS
+      #define CORE_AXIS_2 C_AXIS
+    #elif CORE_IS_YZ
+      #define NORMAL_AXIS X_AXIS
+      #define CORE_AXIS_1 B_AXIS
+      #define CORE_AXIS_2 C_AXIS
+    #endif
+    #if (ENABLED(COREYX) || ENABLED(COREZX) || ENABLED(COREZY))
+      #define CORESIGN(n) (-(n))
+    #else
+      #define CORESIGN(n) (n)
+    #endif
+  #endif
+
+  /**
+   * No adjustable bed on non-cartesians
+   */
+  #if IS_KINEMATIC
+    #undef LEVEL_BED_CORNERS
+  #endif
+
+  /**
+   * SCARA cannot use SLOWDOWN and requires QUICKHOME
+   */
+  #if IS_SCARA
+    #undef SLOWDOWN
+    #define QUICK_HOME
+  #endif
+
+  /**
+   * Set the home position based on settings or manual overrides
+   */
+  #ifdef MANUAL_X_HOME_POS
+    #define X_HOME_POS MANUAL_X_HOME_POS
+  #elif ENABLED(BED_CENTER_AT_0_0)
+    #if ENABLED(DELTA)
+      #define X_HOME_POS 0
+    #else
+      #define X_HOME_POS ((X_BED_SIZE) * (X_HOME_DIR) * 0.5)
+    #endif
+  #else
+    #if ENABLED(DELTA)
+      #define X_HOME_POS (X_MIN_POS + (X_BED_SIZE) * 0.5)
+    #else
+      #define X_HOME_POS (X_HOME_DIR < 0 ? X_MIN_POS : X_MAX_POS)
+    #endif
+  #endif
+
+  #ifdef MANUAL_Y_HOME_POS
+    #define Y_HOME_POS MANUAL_Y_HOME_POS
+  #elif ENABLED(BED_CENTER_AT_0_0)
+    #if ENABLED(DELTA)
+      #define Y_HOME_POS 0
+    #else
+      #define Y_HOME_POS ((Y_BED_SIZE) * (Y_HOME_DIR) * 0.5)
+    #endif
+  #else
+    #if ENABLED(DELTA)
+      #define Y_HOME_POS (Y_MIN_POS + (Y_BED_SIZE) * 0.5)
+    #else
+      #define Y_HOME_POS (Y_HOME_DIR < 0 ? Y_MIN_POS : Y_MAX_POS)
+    #endif
+  #endif
+
+  #ifdef MANUAL_Z_HOME_POS
+    #define Z_HOME_POS MANUAL_Z_HOME_POS
+  #else
+    #define Z_HOME_POS (Z_HOME_DIR < 0 ? Z_MIN_POS : Z_MAX_POS)
+  #endif
+
+  /**
+   * If DELTA_HEIGHT isn't defined use the old setting
+   */
+  #if ENABLED(DELTA) && !defined(DELTA_HEIGHT)
+    #define DELTA_HEIGHT Z_HOME_POS
+  #endif
+
+  /**
+   * Auto Bed Leveling and Z Probe Repeatability Test
+   */
+  #define HOMING_Z_WITH_PROBE (HAS_BED_PROBE && Z_HOME_DIR < 0 && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN))
+
+  /**
+   * Z Sled Probe requires Z_SAFE_HOMING
+   */
+  #if ENABLED(Z_PROBE_SLED)
+    #define Z_SAFE_HOMING
+  #endif
+
+  /**
+   * DELTA should ignore Z_SAFE_HOMING and SLOWDOWN
+   */
+  #if ENABLED(DELTA)
+    #undef Z_SAFE_HOMING
+    #undef SLOWDOWN
+  #endif
+
+  /**
+   * Safe Homing Options
+   */
+  #if ENABLED(Z_SAFE_HOMING)
+    #ifndef Z_SAFE_HOMING_X_POINT
+      #define Z_SAFE_HOMING_X_POINT X_CENTER
+    #endif
+    #ifndef Z_SAFE_HOMING_Y_POINT
+      #define Z_SAFE_HOMING_Y_POINT Y_CENTER
+    #endif
+    #define X_TILT_FULCRUM Z_SAFE_HOMING_X_POINT
+    #define Y_TILT_FULCRUM Z_SAFE_HOMING_Y_POINT
+  #else
+    #define X_TILT_FULCRUM X_HOME_POS
+    #define Y_TILT_FULCRUM Y_HOME_POS
+  #endif
+
+  /**
+   * Host keep alive
+   */
+  #ifndef DEFAULT_KEEPALIVE_INTERVAL
+    #define DEFAULT_KEEPALIVE_INTERVAL 2
+  #endif
+
+  /**
+   * Provide a MAX_AUTORETRACT for older configs
+   */
+  #if ENABLED(FWRETRACT) && !defined(MAX_AUTORETRACT)
+    #define MAX_AUTORETRACT 99
+  #endif
+
+  /**
+   * MAX_STEP_FREQUENCY differs for TOSHIBA
+   */
+  #if ENABLED(CONFIG_STEPPERS_TOSHIBA)
+    #define MAX_STEP_FREQUENCY 10000 // Max step frequency for Toshiba Stepper Controllers
+  #else
+    #define MAX_STEP_FREQUENCY 40000 // Max step frequency for Ultimaker (5000 pps / half step)
+  #endif
+
+  // MS1 MS2 Stepper Driver Microstepping mode table
+  #define MICROSTEP1 LOW,LOW
+  #define MICROSTEP2 HIGH,LOW
+  #define MICROSTEP4 LOW,HIGH
+  #define MICROSTEP8 HIGH,HIGH
+  #define MICROSTEP16 HIGH,HIGH
+
+  /**
+   * Override here because this is set in Configuration_adv.h
+   */
+  #if ENABLED(ULTIPANEL) && DISABLED(ELB_FULL_GRAPHIC_CONTROLLER)
+    #undef SD_DETECT_INVERTED
+  #endif
+
+  /**
+   * Set defaults for missing (newer) options
+   */
+  #ifndef DISABLE_INACTIVE_X
+    #define DISABLE_INACTIVE_X DISABLE_X
+  #endif
+  #ifndef DISABLE_INACTIVE_Y
+    #define DISABLE_INACTIVE_Y DISABLE_Y
+  #endif
+  #ifndef DISABLE_INACTIVE_Z
+    #define DISABLE_INACTIVE_Z DISABLE_Z
+  #endif
+  #ifndef DISABLE_INACTIVE_E
+    #define DISABLE_INACTIVE_E DISABLE_E
+  #endif
+
+  // Power Signal Control Definitions
+  // By default use ATX definition
+  #ifndef POWER_SUPPLY
+    #define POWER_SUPPLY 1
+  #endif
+  #if (POWER_SUPPLY == 1)     // 1 = ATX
+    #define PS_ON_AWAKE  LOW
+    #define PS_ON_ASLEEP HIGH
+  #elif (POWER_SUPPLY == 2)   // 2 = X-Box 360 203W
+    #define PS_ON_AWAKE  HIGH
+    #define PS_ON_ASLEEP LOW
+  #endif
+  #define HAS_POWER_SWITCH (POWER_SUPPLY > 0 && PIN_EXISTS(PS_ON))
+
+  /**
+   * Temp Sensor defines
+   */
+  #if TEMP_SENSOR_0 == -3
+    #define HEATER_0_USES_MAX6675
+    #define MAX6675_IS_MAX31855
+    #define MAX6675_TMIN -270
+    #define MAX6675_TMAX 1800
+  #elif TEMP_SENSOR_0 == -2
+    #define HEATER_0_USES_MAX6675
+    #define MAX6675_TMIN 0
+    #define MAX6675_TMAX 1024
+  #elif TEMP_SENSOR_0 == -1
+    #define HEATER_0_USES_AD595
+  #elif TEMP_SENSOR_0 == 0
+    #undef HEATER_0_MINTEMP
+    #undef HEATER_0_MAXTEMP
+  #elif TEMP_SENSOR_0 > 0
+    #define THERMISTORHEATER_0 TEMP_SENSOR_0
+    #define HEATER_0_USES_THERMISTOR
+  #endif
+
+  #if TEMP_SENSOR_1 <= -2
+    #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_1"
+  #elif TEMP_SENSOR_1 == -1
+    #define HEATER_1_USES_AD595
+  #elif TEMP_SENSOR_1 == 0
+    #undef HEATER_1_MINTEMP
+    #undef HEATER_1_MAXTEMP
+  #elif TEMP_SENSOR_1 > 0
+    #define THERMISTORHEATER_1 TEMP_SENSOR_1
+    #define HEATER_1_USES_THERMISTOR
+  #endif
+
+  #if TEMP_SENSOR_2 <= -2
+    #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_2"
+  #elif TEMP_SENSOR_2 == -1
+    #define HEATER_2_USES_AD595
+  #elif TEMP_SENSOR_2 == 0
+    #undef HEATER_2_MINTEMP
+    #undef HEATER_2_MAXTEMP
+  #elif TEMP_SENSOR_2 > 0
+    #define THERMISTORHEATER_2 TEMP_SENSOR_2
+    #define HEATER_2_USES_THERMISTOR
+  #endif
+
+  #if TEMP_SENSOR_3 <= -2
+    #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_3"
+  #elif TEMP_SENSOR_3 == -1
+    #define HEATER_3_USES_AD595
+  #elif TEMP_SENSOR_3 == 0
+    #undef HEATER_3_MINTEMP
+    #undef HEATER_3_MAXTEMP
+  #elif TEMP_SENSOR_3 > 0
+    #define THERMISTORHEATER_3 TEMP_SENSOR_3
+    #define HEATER_3_USES_THERMISTOR
+  #endif
+
+  #if TEMP_SENSOR_4 <= -2
+    #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_4"
+  #elif TEMP_SENSOR_4 == -1
+    #define HEATER_4_USES_AD595
+  #elif TEMP_SENSOR_4 == 0
+    #undef HEATER_4_MINTEMP
+    #undef HEATER_4_MAXTEMP
+  #elif TEMP_SENSOR_4 > 0
+    #define THERMISTORHEATER_4 TEMP_SENSOR_4
+    #define HEATER_4_USES_THERMISTOR
+  #endif
+
+  #if TEMP_SENSOR_BED <= -2
+    #error "MAX6675 / MAX31855 Thermocouples not supported for TEMP_SENSOR_BED"
+  #elif TEMP_SENSOR_BED == -1
+    #define BED_USES_AD595
+  #elif TEMP_SENSOR_BED == 0
+    #undef BED_MINTEMP
+    #undef BED_MAXTEMP
+  #elif TEMP_SENSOR_BED > 0
+    #define THERMISTORBED TEMP_SENSOR_BED
+    #define BED_USES_THERMISTOR
+  #endif
+
+  /**
+   * Flags for PID handling
+   */
+  #define HAS_PID_HEATING (ENABLED(PIDTEMP) || ENABLED(PIDTEMPBED))
+  #define HAS_PID_FOR_BOTH (ENABLED(PIDTEMP) && ENABLED(PIDTEMPBED))
+
+  /**
+   * Default hotend offsets, if not defined
+   */
+  #if HOTENDS > 1
+    #ifndef HOTEND_OFFSET_X
+      #define HOTEND_OFFSET_X { 0 } // X offsets for each extruder
+    #endif
+    #ifndef HOTEND_OFFSET_Y
+      #define HOTEND_OFFSET_Y { 0 } // Y offsets for each extruder
+    #endif
+    #if !defined(HOTEND_OFFSET_Z) && (ENABLED(DUAL_X_CARRIAGE) || ENABLED(SWITCHING_NOZZLE))
+      #define HOTEND_OFFSET_Z { 0 }
+    #endif
+  #endif
+
+  /**
+   * ARRAY_BY_EXTRUDERS based on EXTRUDERS
+   */
+  #define ARRAY_BY_EXTRUDERS(...) ARRAY_N(EXTRUDERS, __VA_ARGS__)
+  #define ARRAY_BY_EXTRUDERS1(v1) ARRAY_BY_EXTRUDERS(v1, v1, v1, v1, v1, v1)
+
+  /**
+   * ARRAY_BY_HOTENDS based on HOTENDS
+   */
+  #define ARRAY_BY_HOTENDS(...) ARRAY_N(HOTENDS, __VA_ARGS__)
+  #define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1)
+
+  /**
+   * Z_DUAL_ENDSTOPS endstop reassignment
+   */
+  #if ENABLED(Z_DUAL_ENDSTOPS)
+    #define _XMIN_ 100
+    #define _YMIN_ 200
+    #define _ZMIN_ 300
+    #define _XMAX_ 101
+    #define _YMAX_ 201
+    #define _ZMAX_ 301
+    #if Z2_USE_ENDSTOP == _XMIN_
+      #define USE_XMIN_PLUG
+    #elif Z2_USE_ENDSTOP == _XMAX_
+      #define USE_XMAX_PLUG
+    #elif Z2_USE_ENDSTOP == _YMIN_
+      #define USE_YMIN_PLUG
+    #elif Z2_USE_ENDSTOP == _YMAX_
+      #define USE_YMAX_PLUG
+    #elif Z2_USE_ENDSTOP == _ZMIN_
+      #define USE_ZMIN_PLUG
+    #elif Z2_USE_ENDSTOP == _ZMAX_
+      #define USE_ZMAX_PLUG
+    #endif
+    #if Z_HOME_DIR > 0
+      #if Z2_USE_ENDSTOP == _XMIN_
+        #define Z2_MAX_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING
+        #define Z2_MAX_PIN X_MIN_PIN
+      #elif Z2_USE_ENDSTOP == _XMAX_
+        #define Z2_MAX_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING
+        #define Z2_MAX_PIN X_MAX_PIN
+      #elif Z2_USE_ENDSTOP == _YMIN_
+        #define Z2_MAX_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING
+        #define Z2_MAX_PIN Y_MIN_PIN
+      #elif Z2_USE_ENDSTOP == _YMAX_
+        #define Z2_MAX_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING
+        #define Z2_MAX_PIN Y_MAX_PIN
+      #elif Z2_USE_ENDSTOP == _ZMIN_
+        #define Z2_MAX_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
+        #define Z2_MAX_PIN Z_MIN_PIN
+      #elif Z2_USE_ENDSTOP == _ZMAX_
+        #define Z2_MAX_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
+        #define Z2_MAX_PIN Z_MAX_PIN
+      #else
+        #define Z2_MAX_ENDSTOP_INVERTING false
+      #endif
+    #else
+      #if Z2_USE_ENDSTOP == _XMIN_
+        #define Z2_MIN_ENDSTOP_INVERTING X_MIN_ENDSTOP_INVERTING
+        #define Z2_MIN_PIN X_MIN_PIN
+      #elif Z2_USE_ENDSTOP == _XMAX_
+        #define Z2_MIN_ENDSTOP_INVERTING X_MAX_ENDSTOP_INVERTING
+        #define Z2_MIN_PIN X_MAX_PIN
+      #elif Z2_USE_ENDSTOP == _YMIN_
+        #define Z2_MIN_ENDSTOP_INVERTING Y_MIN_ENDSTOP_INVERTING
+        #define Z2_MIN_PIN Y_MIN_PIN
+      #elif Z2_USE_ENDSTOP == _YMAX_
+        #define Z2_MIN_ENDSTOP_INVERTING Y_MAX_ENDSTOP_INVERTING
+        #define Z2_MIN_PIN Y_MAX_PIN
+      #elif Z2_USE_ENDSTOP == _ZMIN_
+        #define Z2_MIN_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING
+        #define Z2_MIN_PIN Z_MIN_PIN
+      #elif Z2_USE_ENDSTOP == _ZMAX_
+        #define Z2_MIN_ENDSTOP_INVERTING Z_MAX_ENDSTOP_INVERTING
+        #define Z2_MIN_PIN Z_MAX_PIN
+      #else
+        #define Z2_MIN_ENDSTOP_INVERTING false
+      #endif
+    #endif
+  #endif
+
+  // Is an endstop plug used for the Z2 endstop or the bed probe?
+  #define IS_Z2_OR_PROBE(A,M) ( \
+       (ENABLED(Z_DUAL_ENDSTOPS) && Z2_USE_ENDSTOP == _##A##M##_) \
+    || (ENABLED(Z_MIN_PROBE_ENDSTOP) && Z_MIN_PROBE_PIN == A##_##M##_PIN ) )
+
+  /**
+   * Set ENDSTOPPULLUPS for active endstop switches
+   */
+  #if ENABLED(ENDSTOPPULLUPS)
+    #if ENABLED(USE_XMAX_PLUG)
+      #define ENDSTOPPULLUP_XMAX
+    #endif
+    #if ENABLED(USE_YMAX_PLUG)
+      #define ENDSTOPPULLUP_YMAX
+    #endif
+    #if ENABLED(USE_ZMAX_PLUG)
+      #define ENDSTOPPULLUP_ZMAX
+    #endif
+    #if ENABLED(USE_XMIN_PLUG)
+      #define ENDSTOPPULLUP_XMIN
+    #endif
+    #if ENABLED(USE_YMIN_PLUG)
+      #define ENDSTOPPULLUP_YMIN
+    #endif
+    #if ENABLED(USE_ZMIN_PLUG)
+      #define ENDSTOPPULLUP_ZMIN
+    #endif
+  #endif
+
+  /**
+   * Shorthand for pin tests, used wherever needed
+   */
+
+  // Steppers
+  #define HAS_X_ENABLE      (PIN_EXISTS(X_ENABLE))
+  #define HAS_X_DIR         (PIN_EXISTS(X_DIR))
+  #define HAS_X_STEP        (PIN_EXISTS(X_STEP))
+  #define HAS_X_MICROSTEPS  (PIN_EXISTS(X_MS1))
+
+  #define HAS_X2_ENABLE     (PIN_EXISTS(X2_ENABLE))
+  #define HAS_X2_DIR        (PIN_EXISTS(X2_DIR))
+  #define HAS_X2_STEP       (PIN_EXISTS(X2_STEP))
+  #define HAS_Y_MICROSTEPS  (PIN_EXISTS(Y_MS1))
+
+  #define HAS_Y_ENABLE      (PIN_EXISTS(Y_ENABLE))
+  #define HAS_Y_DIR         (PIN_EXISTS(Y_DIR))
+  #define HAS_Y_STEP        (PIN_EXISTS(Y_STEP))
+  #define HAS_Z_MICROSTEPS  (PIN_EXISTS(Z_MS1))
+
+  #define HAS_Y2_ENABLE     (PIN_EXISTS(Y2_ENABLE))
+  #define HAS_Y2_DIR        (PIN_EXISTS(Y2_DIR))
+  #define HAS_Y2_STEP       (PIN_EXISTS(Y2_STEP))
+
+  #define HAS_Z_ENABLE      (PIN_EXISTS(Z_ENABLE))
+  #define HAS_Z_DIR         (PIN_EXISTS(Z_DIR))
+  #define HAS_Z_STEP        (PIN_EXISTS(Z_STEP))
+
+  #define HAS_Z2_ENABLE     (PIN_EXISTS(Z2_ENABLE))
+  #define HAS_Z2_DIR        (PIN_EXISTS(Z2_DIR))
+  #define HAS_Z2_STEP       (PIN_EXISTS(Z2_STEP))
+
+  // Extruder steppers and solenoids
+  #define HAS_E0_ENABLE     (PIN_EXISTS(E0_ENABLE))
+  #define HAS_E0_DIR        (PIN_EXISTS(E0_DIR))
+  #define HAS_E0_STEP       (PIN_EXISTS(E0_STEP))
+  #define HAS_E0_MICROSTEPS (PIN_EXISTS(E0_MS1))
+  #define HAS_SOLENOID_0    (PIN_EXISTS(SOL0))
+
+  #define HAS_E1_ENABLE     (PIN_EXISTS(E1_ENABLE))
+  #define HAS_E1_DIR        (PIN_EXISTS(E1_DIR))
+  #define HAS_E1_STEP       (PIN_EXISTS(E1_STEP))
+  #define HAS_E1_MICROSTEPS (PIN_EXISTS(E1_MS1))
+  #define HAS_SOLENOID_1    (PIN_EXISTS(SOL1))
+
+  #define HAS_E2_ENABLE     (PIN_EXISTS(E2_ENABLE))
+  #define HAS_E2_DIR        (PIN_EXISTS(E2_DIR))
+  #define HAS_E2_STEP       (PIN_EXISTS(E2_STEP))
+  #define HAS_E2_MICROSTEPS (PIN_EXISTS(E2_MS1))
+  #define HAS_SOLENOID_2    (PIN_EXISTS(SOL2))
+
+  #define HAS_E3_ENABLE     (PIN_EXISTS(E3_ENABLE))
+  #define HAS_E3_DIR        (PIN_EXISTS(E3_DIR))
+  #define HAS_E3_STEP       (PIN_EXISTS(E3_STEP))
+  #define HAS_E3_MICROSTEPS (PIN_EXISTS(E3_MS1))
+  #define HAS_SOLENOID_3    (PIN_EXISTS(SOL3))
+
+  #define HAS_E4_ENABLE     (PIN_EXISTS(E4_ENABLE))
+  #define HAS_E4_DIR        (PIN_EXISTS(E4_DIR))
+  #define HAS_E4_STEP       (PIN_EXISTS(E4_STEP))
+  #define HAS_E4_MICROSTEPS (PIN_EXISTS(E4_MS1))
+  #define HAS_SOLENOID_4    (PIN_EXISTS(SOL4))
+
+  // Endstops and bed probe
+  #define HAS_X_MIN (PIN_EXISTS(X_MIN) && !IS_Z2_OR_PROBE(X,MIN))
+  #define HAS_X_MAX (PIN_EXISTS(X_MAX) && !IS_Z2_OR_PROBE(X,MAX))
+  #define HAS_Y_MIN (PIN_EXISTS(Y_MIN) && !IS_Z2_OR_PROBE(Y,MIN))
+  #define HAS_Y_MAX (PIN_EXISTS(Y_MAX) && !IS_Z2_OR_PROBE(Y,MAX))
+  #define HAS_Z_MIN (PIN_EXISTS(Z_MIN) && !IS_Z2_OR_PROBE(Z,MIN))
+  #define HAS_Z_MAX (PIN_EXISTS(Z_MAX) && !IS_Z2_OR_PROBE(Z,MAX))
+  #define HAS_Z2_MIN (PIN_EXISTS(Z2_MIN))
+  #define HAS_Z2_MAX (PIN_EXISTS(Z2_MAX))
+  #define HAS_Z_MIN_PROBE_PIN (PIN_EXISTS(Z_MIN_PROBE))
+
+  // Thermistors
+  #define HAS_TEMP_0 (PIN_EXISTS(TEMP_0) && TEMP_SENSOR_0 != 0 && TEMP_SENSOR_0 > -2)
+  #define HAS_TEMP_1 (PIN_EXISTS(TEMP_1) && TEMP_SENSOR_1 != 0 && TEMP_SENSOR_1 > -2)
+  #define HAS_TEMP_2 (PIN_EXISTS(TEMP_2) && TEMP_SENSOR_2 != 0 && TEMP_SENSOR_2 > -2)
+  #define HAS_TEMP_3 (PIN_EXISTS(TEMP_3) && TEMP_SENSOR_3 != 0 && TEMP_SENSOR_3 > -2)
+  #define HAS_TEMP_4 (PIN_EXISTS(TEMP_4) && TEMP_SENSOR_4 != 0 && TEMP_SENSOR_4 > -2)
+  #define HAS_TEMP_HOTEND (HAS_TEMP_0 || ENABLED(HEATER_0_USES_MAX6675))
+  #define HAS_TEMP_BED (PIN_EXISTS(TEMP_BED) && TEMP_SENSOR_BED != 0 && TEMP_SENSOR_BED > -2)
+
+  // Heaters
+  #define HAS_HEATER_0 (PIN_EXISTS(HEATER_0))
+  #define HAS_HEATER_1 (PIN_EXISTS(HEATER_1))
+  #define HAS_HEATER_2 (PIN_EXISTS(HEATER_2))
+  #define HAS_HEATER_3 (PIN_EXISTS(HEATER_3))
+  #define HAS_HEATER_4 (PIN_EXISTS(HEATER_4))
+  #define HAS_HEATER_BED (PIN_EXISTS(HEATER_BED))
+
+  // Thermal protection
+  #define HAS_THERMALLY_PROTECTED_BED (ENABLED(THERMAL_PROTECTION_BED) && HAS_TEMP_BED && HAS_HEATER_BED)
+  #define WATCH_HOTENDS (ENABLED(THERMAL_PROTECTION_HOTENDS) && WATCH_TEMP_PERIOD > 0)
+  #define WATCH_THE_BED (HAS_THERMALLY_PROTECTED_BED && WATCH_BED_TEMP_PERIOD > 0)
+
+  // Auto fans
+  #define HAS_AUTO_FAN_0 (PIN_EXISTS(E0_AUTO_FAN))
+  #define HAS_AUTO_FAN_1 (HOTENDS > 1 && PIN_EXISTS(E1_AUTO_FAN))
+  #define HAS_AUTO_FAN_2 (HOTENDS > 2 && PIN_EXISTS(E2_AUTO_FAN))
+  #define HAS_AUTO_FAN_3 (HOTENDS > 3 && PIN_EXISTS(E3_AUTO_FAN))
+  #define HAS_AUTO_FAN_4 (HOTENDS > 4 && PIN_EXISTS(E4_AUTO_FAN))
+  #define HAS_AUTO_FAN (HAS_AUTO_FAN_0 || HAS_AUTO_FAN_1 || HAS_AUTO_FAN_2 || HAS_AUTO_FAN_3)
+  #define AUTO_1_IS_0 (E1_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
+  #define AUTO_2_IS_0 (E2_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
+  #define AUTO_2_IS_1 (E2_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
+  #define AUTO_3_IS_0 (E3_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
+  #define AUTO_3_IS_1 (E3_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
+  #define AUTO_3_IS_2 (E3_AUTO_FAN_PIN == E2_AUTO_FAN_PIN)
+  #define AUTO_4_IS_0 (E4_AUTO_FAN_PIN == E0_AUTO_FAN_PIN)
+  #define AUTO_4_IS_1 (E4_AUTO_FAN_PIN == E1_AUTO_FAN_PIN)
+  #define AUTO_4_IS_2 (E4_AUTO_FAN_PIN == E2_AUTO_FAN_PIN)
+  #define AUTO_4_IS_3 (E4_AUTO_FAN_PIN == E3_AUTO_FAN_PIN)
+
+  // Other fans
+  #define HAS_FAN0 (PIN_EXISTS(FAN))
+  #define HAS_FAN1 (PIN_EXISTS(FAN1) && CONTROLLER_FAN_PIN != FAN1_PIN && E0_AUTO_FAN_PIN != FAN1_PIN && E1_AUTO_FAN_PIN != FAN1_PIN && E2_AUTO_FAN_PIN != FAN1_PIN && E3_AUTO_FAN_PIN != FAN1_PIN)
+  #define HAS_FAN2 (PIN_EXISTS(FAN2) && CONTROLLER_FAN_PIN != FAN2_PIN && E0_AUTO_FAN_PIN != FAN2_PIN && E1_AUTO_FAN_PIN != FAN2_PIN && E2_AUTO_FAN_PIN != FAN2_PIN && E3_AUTO_FAN_PIN != FAN2_PIN)
+  #define HAS_CONTROLLER_FAN (PIN_EXISTS(CONTROLLER_FAN))
+
+  // Servos
+  #define HAS_SERVOS (defined(NUM_SERVOS) && NUM_SERVOS > 0)
+  #define HAS_SERVO_0 (PIN_EXISTS(SERVO0))
+  #define HAS_SERVO_1 (PIN_EXISTS(SERVO1))
+  #define HAS_SERVO_2 (PIN_EXISTS(SERVO2))
+  #define HAS_SERVO_3 (PIN_EXISTS(SERVO3))
+
+  // Sensors
+  #define HAS_FILAMENT_WIDTH_SENSOR (PIN_EXISTS(FILWIDTH))
+  #define HAS_FIL_RUNOUT (PIN_EXISTS(FIL_RUNOUT))
+
+  // User Interface
+  #define HAS_HOME (PIN_EXISTS(HOME))
+  #define HAS_KILL (PIN_EXISTS(KILL))
+  #define HAS_SUICIDE (PIN_EXISTS(SUICIDE))
+  #define HAS_PHOTOGRAPH (PIN_EXISTS(PHOTOGRAPH))
+  #define HAS_BUZZER (PIN_EXISTS(BEEPER) || ENABLED(LCD_USE_I2C_BUZZER))
+  #define HAS_CASE_LIGHT (PIN_EXISTS(CASE_LIGHT) && ENABLED(CASE_LIGHT_ENABLE))
+
+  // Digital control
+  #define HAS_MICROSTEPS (HAS_X_MICROSTEPS || HAS_Y_MICROSTEPS || HAS_Z_MICROSTEPS || HAS_E0_MICROSTEPS || HAS_E1_MICROSTEPS || HAS_E2_MICROSTEPS || HAS_E3_MICROSTEPS || HAS_E4_MICROSTEPS)
+  #define HAS_STEPPER_RESET (PIN_EXISTS(STEPPER_RESET))
+  #define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS))
+  #define HAS_MOTOR_CURRENT_PWM (PIN_EXISTS(MOTOR_CURRENT_PWM_XY) || PIN_EXISTS(MOTOR_CURRENT_PWM_Z) || PIN_EXISTS(MOTOR_CURRENT_PWM_E))
+
+  /**
+   * This setting is also used by M109 when trying to calculate
+   * a ballpark safe margin to prevent wait-forever situation.
+   */
+  #ifndef EXTRUDE_MINTEMP
+    #define EXTRUDE_MINTEMP 170
+  #endif
+
+  /**
+   * Helper Macros for heaters and extruder fan
+   */
+  #define WRITE_HEATER_0P(v) WRITE(HEATER_0_PIN, v)
+  #if HOTENDS > 1 || ENABLED(HEATERS_PARALLEL)
+    #define WRITE_HEATER_1(v) WRITE(HEATER_1_PIN, v)
+    #if HOTENDS > 2
+      #define WRITE_HEATER_2(v) WRITE(HEATER_2_PIN, v)
+      #if HOTENDS > 3
+        #define WRITE_HEATER_3(v) WRITE(HEATER_3_PIN, v)
+        #if HOTENDS > 4
+          #define WRITE_HEATER_4(v) WRITE(HEATER_4_PIN, v)
+        #endif // HOTENDS > 4
+      #endif // HOTENDS > 3
+    #endif // HOTENDS > 2
+  #endif // HOTENDS > 1
+  #if ENABLED(HEATERS_PARALLEL)
+    #define WRITE_HEATER_0(v) { WRITE_HEATER_0P(v); WRITE_HEATER_1(v); }
+  #else
+    #define WRITE_HEATER_0(v) WRITE_HEATER_0P(v)
+  #endif
+
+  /**
+   * Heated bed requires settings
+   */
+  #if HAS_HEATER_BED
+    #ifndef MAX_BED_POWER
+      #define MAX_BED_POWER 255
+    #endif
+    #ifndef HEATER_BED_INVERTING
+      #define HEATER_BED_INVERTING false
+    #endif
+    #define WRITE_HEATER_BED(v) WRITE(HEATER_BED_PIN, (v) ^ HEATER_BED_INVERTING)
+  #endif
+
+  /**
+   * Up to 3 PWM fans
+   */
+  #if HAS_FAN2
+    #define FAN_COUNT 3
+  #elif HAS_FAN1
+    #define FAN_COUNT 2
+  #elif HAS_FAN0
+    #define FAN_COUNT 1
+  #else
+    #define FAN_COUNT 0
+  #endif
+
+  #if HAS_FAN0
+    #define WRITE_FAN(v) WRITE(FAN_PIN, v)
+    #define WRITE_FAN0(v) WRITE_FAN(v)
+  #endif
+  #if HAS_FAN1
+    #define WRITE_FAN1(v) WRITE(FAN1_PIN, v)
+  #endif
+  #if HAS_FAN2
+    #define WRITE_FAN2(v) WRITE(FAN2_PIN, v)
+  #endif
+  #define WRITE_FAN_N(n, v) WRITE_FAN##n(v)
+
+  /**
+   * Part Cooling fan multipliexer
+   */
+  #define HAS_FANMUX PIN_EXISTS(FANMUX0)
+
+  /**
+   * Servos and probes
+   */
+
+  #if HAS_SERVOS
+    #ifndef Z_ENDSTOP_SERVO_NR
+      #define Z_ENDSTOP_SERVO_NR -1
+    #endif
+  #endif
+
+  #define PROBE_PIN_CONFIGURED (HAS_Z_MIN_PROBE_PIN || (HAS_Z_MIN && ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)))
+  #define HAS_BED_PROBE (PROBE_SELECTED && PROBE_PIN_CONFIGURED && DISABLED(PROBE_MANUALLY))
+
+  #if ENABLED(Z_PROBE_ALLEN_KEY)
+    #define PROBE_IS_TRIGGERED_WHEN_STOWED_TEST
+  #endif
+
+  /**
+   * Bed Probe dependencies
+   */
+  #if HAS_BED_PROBE
+    #if ENABLED(ENDSTOPPULLUPS) && HAS_Z_MIN_PROBE_PIN
+      #define ENDSTOPPULLUP_ZMIN_PROBE
+    #endif
+    #ifndef Z_PROBE_OFFSET_RANGE_MIN
+      #define Z_PROBE_OFFSET_RANGE_MIN -20
+    #endif
+    #ifndef Z_PROBE_OFFSET_RANGE_MAX
+      #define Z_PROBE_OFFSET_RANGE_MAX 20
+    #endif
+    #ifndef XY_PROBE_SPEED
+      #ifdef HOMING_FEEDRATE_XY
+        #define XY_PROBE_SPEED HOMING_FEEDRATE_XY
+      #else
+        #define XY_PROBE_SPEED 4000
+      #endif
+    #endif
+    #if Z_CLEARANCE_BETWEEN_PROBES > Z_CLEARANCE_DEPLOY_PROBE
+      #define _Z_CLEARANCE_DEPLOY_PROBE Z_CLEARANCE_BETWEEN_PROBES
+    #else
+      #define _Z_CLEARANCE_DEPLOY_PROBE Z_CLEARANCE_DEPLOY_PROBE
+    #endif
+  #else
+    #undef X_PROBE_OFFSET_FROM_EXTRUDER
+    #undef Y_PROBE_OFFSET_FROM_EXTRUDER
+    #undef Z_PROBE_OFFSET_FROM_EXTRUDER
+    #define X_PROBE_OFFSET_FROM_EXTRUDER 0
+    #define Y_PROBE_OFFSET_FROM_EXTRUDER 0
+    #define Z_PROBE_OFFSET_FROM_EXTRUDER 0
+  #endif
+
+  /**
+   * Heater & Fan Pausing
+   */
+  #if FAN_COUNT == 0
+    #undef PROBING_FANS_OFF
+  #endif
+  #define QUIET_PROBING (HAS_BED_PROBE && (ENABLED(PROBING_HEATERS_OFF) || ENABLED(PROBING_FANS_OFF) || DELAY_BEFORE_PROBING > 0))
+  #define HEATER_IDLE_HANDLER (ENABLED(ADVANCED_PAUSE_FEATURE) || ENABLED(PROBING_HEATERS_OFF))
+
+  /**
+   * Delta radius/rod trimmers/angle trimmers
+   */
+  #if ENABLED(DELTA)
+    #ifndef DELTA_CALIBRATION_RADIUS
+      #define DELTA_CALIBRATION_RADIUS DELTA_PRINTABLE_RADIUS - 10
+    #endif
+    #ifndef DELTA_ENDSTOP_ADJ
+      #define DELTA_ENDSTOP_ADJ { 0, 0, 0 }
+    #endif
+    #ifndef DELTA_TOWER_ANGLE_TRIM
+      #define DELTA_TOWER_ANGLE_TRIM {0, 0, 0}
+    #endif
+    #ifndef DELTA_RADIUS_TRIM_TOWER
+      #define DELTA_RADIUS_TRIM_TOWER {0, 0, 0}
+    #endif
+    #ifndef DELTA_DIAGONAL_ROD_TRIM_TOWER
+      #define DELTA_DIAGONAL_ROD_TRIM_TOWER {0, 0, 0}
+    #endif
+  #endif
+
+  /**
+   * Set granular options based on the specific type of leveling
+   */
+
+  #define UBL_DELTA  (ENABLED(AUTO_BED_LEVELING_UBL) && (ENABLED(DELTA) || ENABLED(UBL_GRANULAR_SEGMENTATION_FOR_CARTESIAN)))
+  #define ABL_PLANAR (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_3POINT))
+  #define ABL_GRID   (ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR))
+  #define HAS_ABL    (ABL_PLANAR || ABL_GRID || ENABLED(AUTO_BED_LEVELING_UBL))
+  #define HAS_LEVELING          (HAS_ABL || ENABLED(MESH_BED_LEVELING))
+  #define PLANNER_LEVELING      (ABL_PLANAR || ABL_GRID || ENABLED(MESH_BED_LEVELING) || UBL_DELTA)
+  #define HAS_PROBING_PROCEDURE (HAS_ABL || ENABLED(Z_MIN_PROBE_REPEATABILITY_TEST))
+  #if HAS_PROBING_PROCEDURE
+    #define PROBE_BED_WIDTH abs(RIGHT_PROBE_BED_POSITION - (LEFT_PROBE_BED_POSITION))
+    #define PROBE_BED_HEIGHT abs(BACK_PROBE_BED_POSITION - (FRONT_PROBE_BED_POSITION))
+  #endif
+
+  /**
+   * Buzzer/Speaker
+   */
+  #if ENABLED(LCD_USE_I2C_BUZZER)
+    #ifndef LCD_FEEDBACK_FREQUENCY_HZ
+      #define LCD_FEEDBACK_FREQUENCY_HZ 1000
+    #endif
+    #ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS
+      #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100
+    #endif
+  #else
+    #ifndef LCD_FEEDBACK_FREQUENCY_HZ
+      #define LCD_FEEDBACK_FREQUENCY_HZ 5000
+    #endif
+    #ifndef LCD_FEEDBACK_FREQUENCY_DURATION_MS
+      #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+    #endif
+  #endif
+
+  /**
+   * Z_HOMING_HEIGHT / Z_CLEARANCE_BETWEEN_PROBES
+   */
+  #ifndef Z_HOMING_HEIGHT
+    #ifndef Z_CLEARANCE_BETWEEN_PROBES
+      #define Z_HOMING_HEIGHT 0
+    #else
+      #define Z_HOMING_HEIGHT Z_CLEARANCE_BETWEEN_PROBES
+    #endif
+  #endif
+  #ifndef Z_CLEARANCE_BETWEEN_PROBES
+    #define Z_CLEARANCE_BETWEEN_PROBES Z_HOMING_HEIGHT
+  #endif
+  #if Z_CLEARANCE_BETWEEN_PROBES > Z_HOMING_HEIGHT
+    #define MANUAL_PROBE_HEIGHT Z_CLEARANCE_BETWEEN_PROBES
+  #else
+    #define MANUAL_PROBE_HEIGHT Z_HOMING_HEIGHT
+  #endif
+
+  /**
+   * Bed Probing rectangular bounds
+   * These can be further constrained in code for Delta and SCARA
+   */
+  #if ENABLED(DELTA)
+    #ifndef DELTA_PROBEABLE_RADIUS
+      #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
+    #endif
+    // Probing points may be verified at compile time within the radius
+    // using static_assert(HYPOT2(X2-X1,Y2-Y1)<=sq(DELTA_PRINTABLE_RADIUS),"bad probe point!")
+    // so that may be added to SanityCheck.h in the future.
+    #define MIN_PROBE_X (X_CENTER - (DELTA_PROBEABLE_RADIUS))
+    #define MIN_PROBE_Y (Y_CENTER - (DELTA_PROBEABLE_RADIUS))
+    #define MAX_PROBE_X (X_CENTER +  DELTA_PROBEABLE_RADIUS)
+    #define MAX_PROBE_Y (Y_CENTER +  DELTA_PROBEABLE_RADIUS)
+  #elif IS_SCARA
+    #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
+    #define MIN_PROBE_X (X_CENTER - (SCARA_PRINTABLE_RADIUS))
+    #define MIN_PROBE_Y (Y_CENTER - (SCARA_PRINTABLE_RADIUS))
+    #define MAX_PROBE_X (X_CENTER +  SCARA_PRINTABLE_RADIUS)
+    #define MAX_PROBE_Y (Y_CENTER +  SCARA_PRINTABLE_RADIUS)
+  #else
+    // Boundaries for Cartesian probing based on set limits
+    #if ENABLED(BED_CENTER_AT_0_0)
+      #define MIN_PROBE_X (max(X_PROBE_OFFSET_FROM_EXTRUDER, 0) - (X_BED_SIZE) / 2)
+      #define MIN_PROBE_Y (max(Y_PROBE_OFFSET_FROM_EXTRUDER, 0) - (Y_BED_SIZE) / 2)
+      #define MAX_PROBE_X (min(X_BED_SIZE + X_PROBE_OFFSET_FROM_EXTRUDER, X_BED_SIZE) - (X_BED_SIZE) / 2)
+      #define MAX_PROBE_Y (min(Y_BED_SIZE + Y_PROBE_OFFSET_FROM_EXTRUDER, Y_BED_SIZE) - (Y_BED_SIZE) / 2)
+    #else
+      #define MIN_PROBE_X (max(X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER, 0))
+      #define MIN_PROBE_Y (max(Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER, 0))
+      #define MAX_PROBE_X (min(X_MAX_POS + X_PROBE_OFFSET_FROM_EXTRUDER, X_BED_SIZE))
+      #define MAX_PROBE_Y (min(Y_MAX_POS + Y_PROBE_OFFSET_FROM_EXTRUDER, Y_BED_SIZE))
+    #endif
+  #endif
+
+  // Stepper pulse duration, in cycles
+  #define STEP_PULSE_CYCLES ((MINIMUM_STEPPER_PULSE) * CYCLES_PER_MICROSECOND)
+
+  #if ENABLED(SDCARD_SORT_ALPHA)
+    #define HAS_FOLDER_SORTING (FOLDER_SORTING || ENABLED(SDSORT_GCODE))
+  #endif
+
+  // Updated G92 behavior shifts the workspace
+  #define HAS_POSITION_SHIFT DISABLED(NO_WORKSPACE_OFFSETS)
+  // The home offset also shifts the coordinate space
+  #define HAS_HOME_OFFSET (DISABLED(NO_WORKSPACE_OFFSETS) || ENABLED(DELTA))
+  // Either offset yields extra calculations on all moves
+  #define HAS_WORKSPACE_OFFSET (HAS_POSITION_SHIFT || HAS_HOME_OFFSET)
+  // M206 doesn't apply to DELTA
+  #define HAS_M206_COMMAND (HAS_HOME_OFFSET && DISABLED(DELTA))
+
+  // LCD timeout to status screen default is 15s
+  #ifndef LCD_TIMEOUT_TO_STATUS
+    #define LCD_TIMEOUT_TO_STATUS 15000
+  #endif
+
+  /**
+   * DELTA_SEGMENT_MIN_LENGTH for UBL_DELTA
+   */
+  #if UBL_DELTA
+    #ifndef DELTA_SEGMENT_MIN_LENGTH
+      #if IS_SCARA
+        #define DELTA_SEGMENT_MIN_LENGTH 0.25 // SCARA minimum segment size is 0.25mm
+      #elif ENABLED(DELTA)
+        #define DELTA_SEGMENT_MIN_LENGTH 0.10 // mm (still subject to DELTA_SEGMENTS_PER_SECOND)
+      #else // CARTESIAN
+        #define DELTA_SEGMENT_MIN_LENGTH 1.00 // mm (similar to G2/G3 arc segmentation)
+      #endif
+    #endif
+  #endif
+
+  // Shorthand
+  #define GRID_MAX_POINTS ((GRID_MAX_POINTS_X) * (GRID_MAX_POINTS_Y))
+
+  // Add commands that need sub-codes to this list
+  #define USE_GCODE_SUBCODES ENABLED(G38_PROBE_TARGET)
+
+  // MESH_BED_LEVELING overrides PROBE_MANUALLY
+  #if ENABLED(MESH_BED_LEVELING)
+    #undef PROBE_MANUALLY
+  #endif
+
+  // Parking Extruder
+  #if ENABLED(PARKING_EXTRUDER)
+    #ifndef PARKING_EXTRUDER_GRAB_DISTANCE
+      #define PARKING_EXTRUDER_GRAB_DISTANCE 0
+    #endif
+    #ifndef PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE
+      #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE HIGH
+    #endif
+  #endif
+
+#endif // CONDITIONALS_POST_H

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/ConfigurationStore.cpp

@@ -1,299 +0,0 @@
-#include "Marlin.h"
-#include "planner.h"
-#include "temperature.h"
-#include "ultralcd.h"
-#include "ConfigurationStore.h"
-
-void _EEPROM_writeData(int &pos, uint8_t* value, uint8_t size)
-{
-    do
-    {
-        eeprom_write_byte((unsigned char*)pos, *value);
-        pos++;
-        value++;
-    }while(--size);
-}
-#define EEPROM_WRITE_VAR(pos, value) _EEPROM_writeData(pos, (uint8_t*)&value, sizeof(value))
-void _EEPROM_readData(int &pos, uint8_t* value, uint8_t size)
-{
-    do
-    {
-        *value = eeprom_read_byte((unsigned char*)pos);
-        pos++;
-        value++;
-    }while(--size);
-}
-#define EEPROM_READ_VAR(pos, value) _EEPROM_readData(pos, (uint8_t*)&value, sizeof(value))
-//======================================================================================
-
-
-
-
-#define EEPROM_OFFSET 100
-
-
-// IMPORTANT:  Whenever there are changes made to the variables stored in EEPROM
-// in the functions below, also increment the version number. This makes sure that
-// the default values are used whenever there is a change to the data, to prevent
-// wrong data being written to the variables.
-// ALSO:  always make sure the variables in the Store and retrieve sections are in the same order.
-#define EEPROM_VERSION "V10"
-
-#ifdef EEPROM_SETTINGS
-void Config_StoreSettings() 
-{
-  char ver[4]= "000";
-  int i=EEPROM_OFFSET;
-  EEPROM_WRITE_VAR(i,ver); // invalidate data first 
-  EEPROM_WRITE_VAR(i,axis_steps_per_unit);  
-  EEPROM_WRITE_VAR(i,max_feedrate);  
-  EEPROM_WRITE_VAR(i,max_acceleration_units_per_sq_second);
-  EEPROM_WRITE_VAR(i,acceleration);
-  EEPROM_WRITE_VAR(i,retract_acceleration);
-  EEPROM_WRITE_VAR(i,minimumfeedrate);
-  EEPROM_WRITE_VAR(i,mintravelfeedrate);
-  EEPROM_WRITE_VAR(i,minsegmenttime);
-  EEPROM_WRITE_VAR(i,max_xy_jerk);
-  EEPROM_WRITE_VAR(i,max_z_jerk);
-  EEPROM_WRITE_VAR(i,max_e_jerk);
-  EEPROM_WRITE_VAR(i,add_homeing);
-  #ifdef DELTA
-  EEPROM_WRITE_VAR(i,endstop_adj);
-  #endif
-  #ifndef ULTIPANEL
-  int plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP, plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP, plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED;
-  int absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP, absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP, absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
-  #endif
-  EEPROM_WRITE_VAR(i,plaPreheatHotendTemp);
-  EEPROM_WRITE_VAR(i,plaPreheatHPBTemp);
-  EEPROM_WRITE_VAR(i,plaPreheatFanSpeed);
-  EEPROM_WRITE_VAR(i,absPreheatHotendTemp);
-  EEPROM_WRITE_VAR(i,absPreheatHPBTemp);
-  EEPROM_WRITE_VAR(i,absPreheatFanSpeed);
-  EEPROM_WRITE_VAR(i,zprobe_zoffset);
-  #ifdef PIDTEMP
-    EEPROM_WRITE_VAR(i,Kp);
-    EEPROM_WRITE_VAR(i,Ki);
-    EEPROM_WRITE_VAR(i,Kd);
-  #else
-		float dummy = 3000.0f;
-    EEPROM_WRITE_VAR(i,dummy);
-		dummy = 0.0f;
-    EEPROM_WRITE_VAR(i,dummy);
-    EEPROM_WRITE_VAR(i,dummy);
-  #endif
-  #ifndef DOGLCD
-    int lcd_contrast = 32;
-  #endif
-  EEPROM_WRITE_VAR(i,lcd_contrast);
-  char ver2[4]=EEPROM_VERSION;
-  i=EEPROM_OFFSET;
-  EEPROM_WRITE_VAR(i,ver2); // validate data
-  SERIAL_ECHO_START;
-  SERIAL_ECHOLNPGM("Settings Stored");
-}
-#endif //EEPROM_SETTINGS
-
-
-#ifndef DISABLE_M503
-void Config_PrintSettings()
-{  // Always have this function, even with EEPROM_SETTINGS disabled, the current values will be shown
-    SERIAL_ECHO_START;
-    SERIAL_ECHOLNPGM("Steps per unit:");
-    SERIAL_ECHO_START;
-    SERIAL_ECHOPAIR("  M92 X",axis_steps_per_unit[0]);
-    SERIAL_ECHOPAIR(" Y",axis_steps_per_unit[1]);
-    SERIAL_ECHOPAIR(" Z",axis_steps_per_unit[2]);
-    SERIAL_ECHOPAIR(" E",axis_steps_per_unit[3]);
-    SERIAL_ECHOLN("");
-      
-    SERIAL_ECHO_START;
-    SERIAL_ECHOLNPGM("Maximum feedrates (mm/s):");
-    SERIAL_ECHO_START;
-    SERIAL_ECHOPAIR("  M203 X",max_feedrate[0]);
-    SERIAL_ECHOPAIR(" Y",max_feedrate[1] ); 
-    SERIAL_ECHOPAIR(" Z", max_feedrate[2] ); 
-    SERIAL_ECHOPAIR(" E", max_feedrate[3]);
-    SERIAL_ECHOLN("");
-
-    SERIAL_ECHO_START;
-    SERIAL_ECHOLNPGM("Maximum Acceleration (mm/s2):");
-    SERIAL_ECHO_START;
-    SERIAL_ECHOPAIR("  M201 X" ,max_acceleration_units_per_sq_second[0] ); 
-    SERIAL_ECHOPAIR(" Y" , max_acceleration_units_per_sq_second[1] ); 
-    SERIAL_ECHOPAIR(" Z" ,max_acceleration_units_per_sq_second[2] );
-    SERIAL_ECHOPAIR(" E" ,max_acceleration_units_per_sq_second[3]);
-    SERIAL_ECHOLN("");
-    SERIAL_ECHO_START;
-    SERIAL_ECHOLNPGM("Acceleration: S=acceleration, T=retract acceleration");
-    SERIAL_ECHO_START;
-    SERIAL_ECHOPAIR("  M204 S",acceleration ); 
-    SERIAL_ECHOPAIR(" T" ,retract_acceleration);
-    SERIAL_ECHOLN("");
-
-    SERIAL_ECHO_START;
-    SERIAL_ECHOLNPGM("Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s),  Z=maximum Z jerk (mm/s),  E=maximum E jerk (mm/s)");
-    SERIAL_ECHO_START;
-    SERIAL_ECHOPAIR("  M205 S",minimumfeedrate ); 
-    SERIAL_ECHOPAIR(" T" ,mintravelfeedrate ); 
-    SERIAL_ECHOPAIR(" B" ,minsegmenttime ); 
-    SERIAL_ECHOPAIR(" X" ,max_xy_jerk ); 
-    SERIAL_ECHOPAIR(" Z" ,max_z_jerk);
-    SERIAL_ECHOPAIR(" E" ,max_e_jerk);
-    SERIAL_ECHOLN(""); 
-
-    SERIAL_ECHO_START;
-    SERIAL_ECHOLNPGM("Home offset (mm):");
-    SERIAL_ECHO_START;
-    SERIAL_ECHOPAIR("  M206 X",add_homeing[0] );
-    SERIAL_ECHOPAIR(" Y" ,add_homeing[1] );
-    SERIAL_ECHOPAIR(" Z" ,add_homeing[2] );
-    SERIAL_ECHOLN("");
-#ifdef DELTA
-    SERIAL_ECHO_START;
-    SERIAL_ECHOLNPGM("Endstop adjustement (mm):");
-    SERIAL_ECHO_START;
-    SERIAL_ECHOPAIR("  M666 X",endstop_adj[0] );
-    SERIAL_ECHOPAIR(" Y" ,endstop_adj[1] );
-    SERIAL_ECHOPAIR(" Z" ,endstop_adj[2] );
-    SERIAL_ECHOLN("");
-#endif
-#ifdef PIDTEMP
-    SERIAL_ECHO_START;
-    SERIAL_ECHOLNPGM("PID settings:");
-    SERIAL_ECHO_START;
-    SERIAL_ECHOPAIR("   M301 P",Kp); 
-    SERIAL_ECHOPAIR(" I" ,unscalePID_i(Ki)); 
-    SERIAL_ECHOPAIR(" D" ,unscalePID_d(Kd));
-    SERIAL_ECHOLN(""); 
-#endif
-} 
-#endif
-
-
-#ifdef EEPROM_SETTINGS
-void Config_RetrieveSettings()
-{
-    int i=EEPROM_OFFSET;
-    char stored_ver[4];
-    char ver[4]=EEPROM_VERSION;
-    EEPROM_READ_VAR(i,stored_ver); //read stored version
-    //  SERIAL_ECHOLN("Version: [" << ver << "] Stored version: [" << stored_ver << "]");
-    if (strncmp(ver,stored_ver,3) == 0)
-    {
-        // version number match
-        EEPROM_READ_VAR(i,axis_steps_per_unit);  
-        EEPROM_READ_VAR(i,max_feedrate);  
-        EEPROM_READ_VAR(i,max_acceleration_units_per_sq_second);
-        
-        // steps per sq second need to be updated to agree with the units per sq second (as they are what is used in the planner)
-		reset_acceleration_rates();
-        
-        EEPROM_READ_VAR(i,acceleration);
-        EEPROM_READ_VAR(i,retract_acceleration);
-        EEPROM_READ_VAR(i,minimumfeedrate);
-        EEPROM_READ_VAR(i,mintravelfeedrate);
-        EEPROM_READ_VAR(i,minsegmenttime);
-        EEPROM_READ_VAR(i,max_xy_jerk);
-        EEPROM_READ_VAR(i,max_z_jerk);
-        EEPROM_READ_VAR(i,max_e_jerk);
-        EEPROM_READ_VAR(i,add_homeing);
-        #ifdef DELTA
-        EEPROM_READ_VAR(i,endstop_adj);
-        #endif
-        #ifndef ULTIPANEL
-        int plaPreheatHotendTemp, plaPreheatHPBTemp, plaPreheatFanSpeed;
-        int absPreheatHotendTemp, absPreheatHPBTemp, absPreheatFanSpeed;
-        #endif
-        EEPROM_READ_VAR(i,plaPreheatHotendTemp);
-        EEPROM_READ_VAR(i,plaPreheatHPBTemp);
-        EEPROM_READ_VAR(i,plaPreheatFanSpeed);
-        EEPROM_READ_VAR(i,absPreheatHotendTemp);
-        EEPROM_READ_VAR(i,absPreheatHPBTemp);
-        EEPROM_READ_VAR(i,absPreheatFanSpeed);
-        EEPROM_READ_VAR(i,zprobe_zoffset);
-        #ifndef PIDTEMP
-        float Kp,Ki,Kd;
-        #endif
-        // do not need to scale PID values as the values in EEPROM are already scaled		
-        EEPROM_READ_VAR(i,Kp);
-        EEPROM_READ_VAR(i,Ki);
-        EEPROM_READ_VAR(i,Kd);
-        #ifndef DOGLCD
-        int lcd_contrast;
-        #endif
-        EEPROM_READ_VAR(i,lcd_contrast);
-
-		// Call updatePID (similar to when we have processed M301)
-		updatePID();
-        SERIAL_ECHO_START;
-        SERIAL_ECHOLNPGM("Stored settings retrieved");
-    }
-    else
-    {
-        Config_ResetDefault();
-    }
-    #ifdef EEPROM_CHITCHAT
-      Config_PrintSettings();
-    #endif
-}
-#endif
-
-void Config_ResetDefault()
-{
-    float tmp1[]=DEFAULT_AXIS_STEPS_PER_UNIT;
-    float tmp2[]=DEFAULT_MAX_FEEDRATE;
-    long tmp3[]=DEFAULT_MAX_ACCELERATION;
-    for (short i=0;i<4;i++) 
-    {
-        axis_steps_per_unit[i]=tmp1[i];  
-        max_feedrate[i]=tmp2[i];  
-        max_acceleration_units_per_sq_second[i]=tmp3[i];
-    }
-    
-    // steps per sq second need to be updated to agree with the units per sq second
-    reset_acceleration_rates();
-    
-    acceleration=DEFAULT_ACCELERATION;
-    retract_acceleration=DEFAULT_RETRACT_ACCELERATION;
-    minimumfeedrate=DEFAULT_MINIMUMFEEDRATE;
-    minsegmenttime=DEFAULT_MINSEGMENTTIME;       
-    mintravelfeedrate=DEFAULT_MINTRAVELFEEDRATE;
-    max_xy_jerk=DEFAULT_XYJERK;
-    max_z_jerk=DEFAULT_ZJERK;
-    max_e_jerk=DEFAULT_EJERK;
-    add_homeing[0] = add_homeing[1] = add_homeing[2] = 0;
-#ifdef DELTA
-    endstop_adj[0] = endstop_adj[1] = endstop_adj[2] = 0;
-#endif
-#ifdef ULTIPANEL
-    plaPreheatHotendTemp = PLA_PREHEAT_HOTEND_TEMP;
-    plaPreheatHPBTemp = PLA_PREHEAT_HPB_TEMP;
-    plaPreheatFanSpeed = PLA_PREHEAT_FAN_SPEED;
-    absPreheatHotendTemp = ABS_PREHEAT_HOTEND_TEMP;
-    absPreheatHPBTemp = ABS_PREHEAT_HPB_TEMP;
-    absPreheatFanSpeed = ABS_PREHEAT_FAN_SPEED;
-#endif
-#ifdef ENABLE_AUTO_BED_LEVELING
-    zprobe_zoffset = -Z_PROBE_OFFSET_FROM_EXTRUDER;
-#endif
-#ifdef DOGLCD
-    lcd_contrast = DEFAULT_LCD_CONTRAST;
-#endif
-#ifdef PIDTEMP
-    Kp = DEFAULT_Kp;
-    Ki = scalePID_i(DEFAULT_Ki);
-    Kd = scalePID_d(DEFAULT_Kd);
-    
-    // call updatePID (similar to when we have processed M301)
-    updatePID();
-    
-#ifdef PID_ADD_EXTRUSION_RATE
-    Kc = DEFAULT_Kc;
-#endif//PID_ADD_EXTRUSION_RATE
-#endif//PIDTEMP
-
-SERIAL_ECHO_START;
-SERIAL_ECHOLNPGM("Hardcoded Default Settings Loaded");
-
-}

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/ConfigurationStore.h

@@ -1,22 +0,0 @@
-#ifndef CONFIG_STORE_H
-#define CONFIG_STORE_H
-
-#include "Configuration.h"
-
-void Config_ResetDefault();
-
-#ifndef DISABLE_M503
-void Config_PrintSettings();
-#else
-FORCE_INLINE void Config_PrintSettings() {}
-#endif
-
-#ifdef EEPROM_SETTINGS
-void Config_StoreSettings();
-void Config_RetrieveSettings();
-#else
-FORCE_INLINE void Config_StoreSettings() {}
-FORCE_INLINE void Config_RetrieveSettings() { Config_ResetDefault(); Config_PrintSettings(); }
-#endif
-
-#endif//CONFIG_STORE_H

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/DOGMbitmaps.h

@@ -1,487 +0,0 @@
-#define START_BMPWIDTH 	128	//Width in pixels
-#define START_BMPHEIGHT 	64	//Height in pixels
-#define START_BMPBYTEWIDTH 	16	//Width in bytes
-const unsigned char start_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-/*0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xF9,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xF0,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xE0,0x7F,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xC0,0x3F,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0x80,0x1F,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0x00,0x0F,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFE,0x00,0x07,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFC,0x00,0x03,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xF8,0x00,0x01,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xF0,0x00,0x00,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xE0,0x00,0x00,0x7F,0xFF,0xF0,
-0xFF,0xFF,0xC0,0x00,0x00,0x3F,0xFF,0xF0,
-0xFF,0xFF,0x80,0x00,0x00,0x3F,0xFF,0xF0,
-0xFF,0xFF,0x00,0x00,0x00,0x1F,0xFF,0xF0,
-0xFF,0xFE,0x00,0x00,0x00,0x0F,0xFF,0xF0,
-0xFF,0xFE,0x00,0x00,0x00,0x07,0xFF,0xF0,
-0xFF,0xFC,0x00,0x00,0x00,0x07,0xFF,0xF0,
-0xFF,0xFC,0x00,0x00,0x00,0x03,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x03,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x03,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x01,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x03,0xFF,0xF0,
-0xFF,0xF8,0x00,0x00,0x00,0x03,0xFF,0xF0,
-0xFF,0xFC,0x00,0x00,0x00,0x03,0xFF,0xF0,
-0xFF,0xFC,0x00,0x00,0x00,0x07,0xFF,0xF0,
-0xFF,0xFE,0x00,0x00,0x00,0x07,0xFF,0xF0,
-0xFF,0xFE,0x00,0x00,0x00,0x0F,0xFF,0xF0,
-0xFF,0xFF,0x00,0x00,0x00,0x1F,0xFF,0xF0,
-0xFF,0xFF,0x80,0x00,0x00,0x1F,0xFF,0xF0,
-0xFF,0xFF,0xC0,0x00,0x00,0x3F,0xFF,0xF0,
-0xFF,0xFF,0xE0,0x00,0x00,0x7F,0xFF,0xF0,
-0xFF,0xFF,0xF0,0x00,0x01,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFC,0x00,0x03,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0x00,0x1F,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,
-0x83,0xFF,0xFF,0xFE,0x0F,0xFF,0xFF,0xF0,
-0x80,0xFF,0xFF,0xFE,0x03,0xFF,0xFF,0xF0,
-0x88,0x7F,0xFF,0xFE,0x23,0xFF,0xFF,0xF0,
-0x8C,0x70,0x38,0x0E,0x71,0x81,0xC0,0x70,
-0x8C,0x60,0x38,0x0E,0x63,0x80,0xC0,0x30,
-0x80,0xE3,0x19,0xC6,0x07,0xF8,0xC7,0x30,
-0x80,0xE0,0x19,0xC6,0x03,0x80,0xC7,0x10,
-0x8C,0x62,0x79,0xC6,0x63,0x9C,0xC7,0x30,
-0x8C,0x63,0xF8,0xC6,0x71,0x18,0xC6,0x30,
-0x8E,0x30,0x18,0x0E,0x71,0x80,0xC0,0x30,
-0x9E,0x38,0x39,0x1E,0x79,0xC4,0xC4,0xF0,
-0xFF,0xFF,0xF9,0xFF,0xFF,0xFF,0xC7,0xF0,
-0xFF,0xFF,0xF9,0xFF,0xFF,0xFF,0xC7,0xF0,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0
-
-
-//3D printer
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0xFC,0x03,0xFC,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x03,0xFE,0x03,0xFF,0x00,0x00,0xFF,0x80,0x01,0x80,0x00,0x03,0x00,0x00,0x00,0x00,
-0x03,0x07,0x06,0x07,0x80,0x01,0x81,0xC0,0x01,0x80,0x00,0x03,0x00,0x00,0x00,0x00,
-0x00,0x03,0x06,0x01,0x80,0x01,0x80,0xC0,0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x00,
-0x00,0x03,0x06,0x01,0xC0,0x01,0x80,0xC0,0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x00,
-0x00,0x06,0x06,0x00,0xC0,0x01,0x80,0xC6,0x71,0x83,0x7E,0x0F,0xE0,0xF8,0x0C,0xE0,
-0x00,0x0E,0x06,0x00,0xC0,0x01,0x80,0xC7,0xF1,0x83,0xFF,0x1F,0xE3,0xFC,0x0F,0xE0,
-0x00,0xF8,0x0C,0x00,0xC0,0x03,0x01,0x8F,0x03,0x07,0x87,0x06,0x07,0x0E,0x1E,0x00,
-0x00,0xF8,0x0C,0x00,0xC0,0x03,0x07,0x0C,0x03,0x06,0x03,0x0C,0x0C,0x06,0x18,0x00,
-0x00,0x0C,0x0C,0x00,0xC0,0x03,0xFE,0x0C,0x03,0x06,0x03,0x0C,0x0C,0x06,0x18,0x00,
-0x00,0x06,0x0C,0x01,0x80,0x03,0xF8,0x0C,0x03,0x06,0x03,0x0C,0x1F,0xFE,0x18,0x00,
-0x00,0x06,0x18,0x01,0x80,0x06,0x00,0x18,0x06,0x0C,0x06,0x0C,0x1F,0xFE,0x30,0x00,
-0x00,0x06,0x18,0x01,0x80,0x06,0x00,0x18,0x06,0x0C,0x06,0x18,0x18,0x00,0x30,0x00,
-0x00,0x06,0x18,0x03,0x00,0x06,0x00,0x18,0x06,0x0C,0x06,0x18,0x18,0x00,0x30,0x00,
-0x00,0x0C,0x18,0x06,0x00,0x06,0x00,0x18,0x06,0x0C,0x06,0x18,0x18,0x00,0x30,0x00,
-0x18,0x1C,0x18,0x1C,0x00,0x06,0x00,0x18,0x06,0x0C,0x06,0x18,0x1C,0x0C,0x30,0x00,
-0x1F,0xF8,0x3F,0xF8,0x00,0x0C,0x00,0x30,0x0C,0x18,0x0C,0x1F,0x8F,0xFC,0x60,0x00,
-0x0F,0xE0,0x3F,0xE0,0x00,0x0C,0x00,0x30,0x0C,0x18,0x0C,0x0F,0x83,0xF0,0x60,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-*/
-  // chuangxiang 3D
-/*
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x60,0x00,0x01,0xC0,0x00,0x00,0x00,0x00,0x00,0x1E,0x00,0x00,0x00,
-0x00,0x00,0x00,0xE0,0x06,0x01,0x80,0x18,0x00,0x00,0x00,0x0E,0x1F,0x00,0x00,0x00,
-0x00,0x00,0x00,0xF8,0x06,0x01,0x87,0xF8,0x00,0x00,0x70,0x0C,0x39,0x80,0x00,0x00,
-0x00,0x00,0x00,0xCE,0x06,0x01,0xB6,0x18,0x0F,0xFF,0xC0,0x0C,0x30,0x00,0x00,0x00,
-0x00,0x00,0x01,0x86,0x66,0x0F,0xE6,0x18,0x00,0x00,0x00,0x19,0xBF,0xF0,0x00,0x00,
-0x00,0x00,0x01,0x80,0x66,0x03,0x87,0xF8,0x00,0x00,0x00,0x1B,0xB3,0x00,0x00,0x00,
-0x00,0x00,0x03,0x00,0x66,0x03,0xC6,0x18,0x00,0x00,0x00,0x33,0x73,0x00,0x00,0x00,
-0x00,0x00,0x07,0xFC,0x66,0x07,0xF7,0xF8,0x00,0x00,0x00,0x7E,0xF3,0x00,0x00,0x00,
-0x00,0x00,0x0D,0x8C,0x66,0x07,0xB6,0x18,0x00,0x00,0xC0,0x36,0xFF,0xF0,0x00,0x00,
-0x00,0x00,0x01,0x8C,0x66,0x0D,0x86,0x18,0x00,0x01,0xE0,0x0D,0xB3,0x00,0x00,0x00,
-0x00,0x00,0x01,0x8C,0x66,0x19,0x87,0xF8,0x03,0xFF,0x00,0x0C,0x33,0x00,0x00,0x00,
-0x00,0x00,0x01,0x9C,0x66,0x01,0x86,0x18,0x00,0x00,0x00,0x1B,0xB3,0x00,0x00,0x00,
-0x00,0x00,0x01,0xF8,0x66,0x00,0x00,0x00,0x00,0x00,0x00,0x3E,0x3F,0xF0,0x00,0x00,
-0x00,0x00,0x01,0xB8,0x06,0x00,0x6C,0x38,0x00,0x00,0x00,0x00,0x33,0x00,0x00,0x00,
-0x00,0x00,0x01,0x83,0x06,0x00,0x66,0x1C,0x00,0x00,0x00,0x01,0xB3,0x00,0x00,0x00,
-0x00,0x00,0x01,0x83,0x06,0x06,0x67,0xCE,0x00,0x00,0x18,0x0F,0x33,0x00,0x00,0x00,
-0x00,0x00,0x01,0x83,0x06,0x0E,0x60,0xC0,0x1F,0xFF,0xFC,0x38,0x33,0x38,0x00,0x00,
-0x00,0x00,0x01,0xFF,0x3E,0x0C,0x7F,0xE0,0x00,0x00,0x00,0x00,0x3F,0xE0,0x00,0x00,
-0x00,0x00,0x00,0x00,0x0C,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x7E,0x00,0x00,0x00,0x0F,0x03,0x80,0x00,0x00,0x00,0x3E,0x7E,0x00,0x00,
-0x00,0x00,0xC6,0x00,0x00,0x00,0x03,0x03,0x80,0x00,0x00,0x00,0x63,0x33,0x00,0x00,
-0x00,0x00,0xC6,0x00,0x00,0x00,0x03,0x00,0x00,0xC0,0x00,0x00,0x63,0x31,0x80,0x00,
-0x00,0x01,0x80,0x00,0x00,0x00,0x03,0x00,0x00,0xC0,0x00,0x00,0x06,0x31,0x80,0x00,
-0x00,0x01,0x80,0xFF,0x1F,0x0F,0x83,0x07,0x83,0xF3,0xDE,0x00,0x1C,0x31,0x80,0x00,
-0x00,0x01,0x80,0x3B,0x31,0x98,0xC3,0x01,0x80,0xC1,0x8C,0x00,0x06,0x31,0x80,0x00,
-0x00,0x01,0x80,0x30,0x3F,0x87,0xC3,0x01,0x80,0xC0,0xD8,0x00,0x03,0x31,0x80,0x00,
-0x00,0x01,0x80,0x30,0x30,0x0C,0xC3,0x01,0x80,0xC0,0xD8,0x00,0x03,0x31,0x80,0x00,
-0x00,0x00,0xC6,0x30,0x30,0x18,0xC3,0x01,0x80,0xC0,0xF0,0x00,0x63,0x31,0x80,0x00,
-0x00,0x00,0xCC,0x30,0x31,0x98,0xC3,0x01,0x80,0xC0,0x70,0x00,0x66,0x33,0x00,0x00,
-0x00,0x00,0x78,0xFC,0x1F,0x0F,0xEF,0xC7,0xE0,0x70,0x60,0x00,0x3C,0x7E,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xC0,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-*/
-
-//Creality 3d
-/*
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x7C,0x00,0x00,
-0x01,0xFC,0x00,0x00,0x00,0x00,0x7C,0x03,0x80,0x00,0x00,0x00,0x00,0xC6,0x3F,0x80,
-0x03,0x1C,0x00,0x00,0x00,0x00,0x0C,0x03,0x80,0x30,0x00,0x00,0x00,0xC3,0x18,0xC0,
-0x06,0x0C,0x00,0x00,0x00,0x00,0x0C,0x00,0x00,0x30,0x00,0x00,0x00,0xC3,0x18,0x60,
-0x06,0x0C,0x00,0x00,0x00,0x00,0x0C,0x00,0x00,0x30,0x00,0x00,0x00,0x03,0x18,0x30,
-0x0C,0x00,0xF7,0x87,0xC1,0xF8,0x0C,0x07,0x80,0xFE,0x3D,0xE0,0x00,0x06,0x18,0x30,
-0x0C,0x00,0x3D,0x8C,0x63,0x0C,0x0C,0x01,0x80,0x30,0x18,0xC0,0x00,0x1E,0x18,0x30,
-0x0C,0x00,0x38,0x18,0x33,0x0C,0x0C,0x01,0x80,0x30,0x0D,0x80,0x00,0x03,0x18,0x30,
-0x0C,0x00,0x30,0x18,0x30,0x3C,0x0C,0x01,0x80,0x30,0x0D,0x80,0x00,0x01,0x98,0x30,
-0x0C,0x00,0x30,0x1F,0xF1,0xEC,0x0C,0x01,0x80,0x30,0x0D,0x80,0x00,0x01,0x98,0x30,
-0x0C,0x0C,0x30,0x18,0x03,0x0C,0x0C,0x01,0x80,0x30,0x07,0x80,0x00,0xC1,0x98,0x30,
-0x06,0x0C,0x30,0x18,0x33,0x0C,0x0C,0x01,0x80,0x30,0x07,0x00,0x00,0xC1,0x98,0x60,
-0x07,0x18,0x30,0x0C,0x63,0x1F,0x0C,0x01,0x80,0x33,0x03,0x00,0x00,0xC3,0x18,0xC0,
-0x01,0xF0,0xFC,0x07,0xC1,0xFF,0x7F,0x87,0xE0,0x1E,0x03,0x00,0x00,0x7E,0x3F,0x80,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1E,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1C,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
-*/
-
-// ENDER
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE3,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF3,0xCF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1,0xE1,0xCF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFE,0x78,0x00,0x00,0x03,0xDD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFE,0xFF,0x80,0x7E,0x00,0x01,0xEE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFE,0x7D,0xCF,0xFC,0x00,0x00,0xF7,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0x8E,0x06,0x00,0x00,0x00,0x7B,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,0x7D,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFC,0x01,0xFE,0x00,0x00,0x3E,0xE7,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,0x03,0x1F,0x73,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF8,0x00,0x01,0x8F,0x81,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x00,0x00,0x83,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xFC,0x00,0x00,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x0F,0xFF,0xC0,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFE,0x03,0xFF,0xFF,0xC0,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF9,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,0x07,0xC0,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x07,0xE0,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x07,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x07,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x03,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x83,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC3,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xF8,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF9,0xF8,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7E,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x8E,0x03,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x7F,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0x80,0x00,0x7F,0xFF,0xFF,0xE0,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xC3,0xFC,0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xC3,0xFC,0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0x87,0xFD,0xFF,0xFF,0xFF,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0x87,0xFF,0xFF,0xFF,0xFF,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0x0F,0xE7,0xF3,0x0F,0xFC,0x23,0xFC,0x3F,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0x0F,0xEF,0x80,0x07,0xF0,0x03,0xF0,0x1E,0x00,0x7F,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFE,0x1F,0xCF,0x81,0x87,0xC7,0x87,0xC7,0x0C,0x00,0x7F,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFE,0x00,0x1F,0xC7,0xC7,0x8F,0xC7,0x9F,0x0F,0x0C,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFE,0x00,0x1F,0x87,0x8F,0x1F,0x8F,0x1F,0x0F,0x1F,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFC,0x3F,0x9F,0x8F,0x8F,0x1F,0x8E,0x00,0x1E,0x3F,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFC,0x7F,0x3F,0x0F,0x1E,0x3F,0x1E,0x3F,0xFE,0x3F,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xF8,0x7F,0xFF,0x1F,0x1C,0x3F,0x1C,0x7F,0xFC,0x7F,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0x1E,0x1C,0x7E,0x1C,0x7F,0xFC,0x7F,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xF0,0xFF,0xCE,0x3E,0x3C,0x7E,0x3C,0x7F,0xB8,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xF0,0xFF,0x9E,0x3C,0x38,0x7C,0x38,0x7E,0x78,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xE1,0xFF,0x3C,0x7C,0x78,0x7C,0x78,0x3C,0xF1,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xE1,0xF8,0x38,0x78,0x78,0x10,0x18,0x01,0xF1,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0x00,0x00,0x60,0x20,0x3C,0x00,0x7C,0x07,0x80,0x7F,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0x1F,0xFE,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
-
-};
-
-#define STATUS_SCREENWIDTH 		125	//Width in pixels
-#define STATUS_SCREENHEIGHT 	19	//Height in pixels
-#define STATUS_SCREENBYTEWIDTH 	16	//Width in bytes
-const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-//chuangxiang
-/*
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
-0x00,0x80,0x81,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
-0x00,0xC0,0x81,0x1F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
-0x01,0x20,0x81,0x10,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
-0x02,0x14,0x8F,0xDF,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
-0x04,0x04,0x81,0x10,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
-0x0B,0xE4,0x83,0x9F,0x80,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
-0x02,0x24,0x85,0x50,0x80,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
-0x02,0x24,0x89,0x1F,0x80,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
-0x02,0x24,0x81,0x10,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
-0x02,0xC4,0x80,0xA1,0x00,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2F,0x03,0xD0,
-0x02,0x00,0x82,0x90,0x80,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
-0x02,0x10,0x82,0x8A,0x40,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
-0x02,0x12,0x84,0x82,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x27,0x87,0x90,
-0x01,0xF1,0x00,0x7E,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x33,0x87,0x30,
-0x00,0x00,0x00,0x00,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
-0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
-0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,
-*/
-
-// 3D
-/*
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
-0x00,0x3E,0x0F,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
-0x00,0xC1,0x86,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
-0x00,0xC1,0x86,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
-0x00,0x01,0x86,0x04,0x00,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
-0x00,0x03,0x06,0x04,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
-0x00,0x1F,0x06,0x04,0x00,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
-0x00,0x03,0x06,0x04,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
-0x00,0x01,0x86,0x04,0x00,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2F,0x03,0xD0,
-0x00,0xC1,0x86,0x0C,0x00,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
-0x00,0xC1,0x86,0x18,0x00,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
-0x00,0x3E,0x0F,0xF0,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x27,0x87,0x90,
-0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x33,0x87,0x30,
-0x00,0x00,0x00,0x00,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
-0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
-0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,
-*/
-
-// ENDER-3
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
-0xF8,0x01,0x80,0x00,0x0C,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
-0x48,0x00,0x80,0x00,0x12,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
-0x43,0xC3,0x8C,0xD0,0x02,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
-0x71,0x24,0x92,0x67,0xCC,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
-0x41,0x24,0x9E,0x40,0x02,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2F,0x03,0xD0,
-0x49,0x24,0x90,0x40,0x12,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
-0xFB,0xB3,0xCE,0xE0,0x0C,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
-0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x27,0x87,0x90,
-0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x33,0x87,0x30,
-0x00,0x00,0x00,0x00,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
-0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
-0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,
-
-};
-
-#define STATUS_SCREENWIDTH 		125	//Width in pixels
-#define STATUS_SCREENHEIGHT 	19	//Height in pixels
-#define STATUS_SCREENBYTEWIDTH 	16	//Width in bytes
-const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
-//chuangxiang
-/*
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0, 
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
-0x00,0x80,0x81,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
-0x00,0xC0,0x81,0x1F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
-0x01,0x20,0x81,0x10,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
-0x02,0x14,0x8F,0xDF,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
-0x04,0x04,0x81,0x10,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
-0x0B,0xE4,0x83,0x9F,0x80,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
-0x02,0x24,0x85,0x50,0x80,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
-0x02,0x24,0x89,0x1F,0x80,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
-0x02,0x24,0x81,0x10,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
-0x02,0xC4,0x80,0xA1,0x00,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2C,0x00,0xD0,
-0x02,0x00,0x82,0x90,0x80,0x1F,0xE0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x30,0x10,
-0x02,0x10,0x82,0x8A,0x40,0x3F,0xF0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x78,0x10,
-0x02,0x12,0x84,0x82,0x00,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0xFC,0x10,
-0x01,0xF1,0x00,0x7E,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x30,0xFC,0x30,
-0x00,0x00,0x00,0x00,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
-0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
-0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,
-*/
-
-// 3D
-/*
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
-0x00,0x3E,0x0F,0xF0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
-0x00,0xC1,0x86,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
-0x00,0xC1,0x86,0x0C,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
-0x00,0x01,0x86,0x04,0x00,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
-0x00,0x03,0x06,0x04,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
-0x00,0x1F,0x06,0x04,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
-0x00,0x03,0x06,0x04,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
-0x00,0x01,0x86,0x04,0x00,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2C,0x00,0xD0,
-0x00,0xC1,0x86,0x0C,0x00,0x1F,0xE0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x30,0x10,
-0x00,0xC1,0x86,0x18,0x00,0x3F,0xF0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x78,0x10,
-0x00,0x3E,0x0F,0xF0,0x00,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0xFC,0x10,
-0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x30,0xFC,0x30,
-0x00,0x00,0x00,0x00,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
-0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
-0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,
-*/
-
-// ENDER-3
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
-0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
-0xF8,0x01,0x80,0x00,0x0C,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
-0x48,0x00,0x80,0x00,0x12,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
-0x43,0xC3,0x8C,0xD0,0x02,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
-0x71,0x24,0x92,0x67,0xCC,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
-0x41,0x24,0x9E,0x40,0x02,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2C,0x00,0xD0,
-0x49,0x24,0x90,0x40,0x12,0x1F,0xE0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x30,0x10,
-0xFB,0xB3,0xCE,0xE0,0x0C,0x3F,0xF0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x78,0x10,
-0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0xFC,0x10,
-0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x30,0xFC,0x30,
-0x00,0x00,0x00,0x00,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
-0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
-0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,
-
-};
-
-

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/G26_Mesh_Validation_Tool.cpp

@@ -0,0 +1,887 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Marlin Firmware -- G26 - Mesh Validation Tool
+ */
+
+#include "MarlinConfig.h"
+
+#if ENABLED(AUTO_BED_LEVELING_UBL) && ENABLED(UBL_G26_MESH_VALIDATION)
+
+  #include "ubl.h"
+  #include "Marlin.h"
+  #include "planner.h"
+  #include "stepper.h"
+  #include "temperature.h"
+  #include "ultralcd.h"
+  #include "gcode.h"
+
+  #define EXTRUSION_MULTIPLIER 1.0
+  #define RETRACTION_MULTIPLIER 1.0
+  #define NOZZLE 0.4
+  #define FILAMENT 1.75
+  #define LAYER_HEIGHT 0.2
+  #define PRIME_LENGTH 10.0
+  #define BED_TEMP 60.0
+  #define HOTEND_TEMP 205.0
+  #define OOZE_AMOUNT 0.3
+
+  #define SIZE_OF_INTERSECTION_CIRCLES 5
+  #define SIZE_OF_CROSSHAIRS 3
+
+  #if SIZE_OF_CROSSHAIRS >= SIZE_OF_INTERSECTION_CIRCLES
+    #error "SIZE_OF_CROSSHAIRS must be less than SIZE_OF_INTERSECTION_CIRCLES."
+  #endif
+
+  /**
+   *   G26 Mesh Validation Tool
+   *
+   *   G26 is a Mesh Validation Tool intended to provide support for the Marlin Unified Bed Leveling System.
+   *   In order to fully utilize and benefit from the Marlin Unified Bed Leveling System an accurate Mesh must
+   *   be defined. G29 is designed to allow the user to quickly validate the correctness of her Mesh. It will
+   *   first heat the bed and nozzle. It will then print lines and circles along the Mesh Cell boundaries and
+   *   the intersections of those lines (respectively).
+   *
+   *   This action allows the user to immediately see where the Mesh is properly defined and where it needs to
+   *   be edited. The command will generate the Mesh lines closest to the nozzle's starting position. Alternatively
+   *   the user can specify the X and Y position of interest with command parameters. This allows the user to
+   *   focus on a particular area of the Mesh where attention is needed.
+   *
+   *   B #  Bed         Set the Bed Temperature. If not specified, a default of 60 C. will be assumed.
+   *
+   *   C    Current     When searching for Mesh Intersection points to draw, use the current nozzle location
+   *                    as the base for any distance comparison.
+   *
+   *   D    Disable     Disable the Unified Bed Leveling System. In the normal case the user is invoking this
+   *                    command to see how well a Mesh as been adjusted to match a print surface. In order to do
+   *                    this the Unified Bed Leveling System is turned on by the G26 command. The D parameter
+   *                    alters the command's normal behaviour and disables the Unified Bed Leveling System even if
+   *                    it is on.
+   *
+   *   H #  Hotend      Set the Nozzle Temperature. If not specified, a default of 205 C. will be assumed.
+   *
+   *   F #  Filament    Used to specify the diameter of the filament being used. If not specified
+   *                    1.75mm filament is assumed. If you are not getting acceptable results by using the
+   *                    'correct' numbers, you can scale this number up or down a little bit to change the amount
+   *                    of filament that is being extruded during the printing of the various lines on the bed.
+   *
+   *   K    Keep-On     Keep the heaters turned on at the end of the command.
+   *
+   *   L #  Layer       Layer height. (Height of nozzle above bed)  If not specified .20mm will be used.
+   *
+   *   O #  Ooooze      How much your nozzle will Ooooze filament while getting in position to print. This
+   *                    is over kill, but using this parameter will let you get the very first 'circle' perfect
+   *                    so you have a trophy to peel off of the bed and hang up to show how perfectly you have your
+   *                    Mesh calibrated. If not specified, a filament length of .3mm is assumed.
+   *
+   *   P #  Prime       Prime the nozzle with specified length of filament. If this parameter is not
+   *                    given, no prime action will take place. If the parameter specifies an amount, that much
+   *                    will be purged before continuing. If no amount is specified the command will start
+   *                    purging filament until the user provides an LCD Click and then it will continue with
+   *                    printing the Mesh. You can carefully remove the spent filament with a needle nose
+   *                    pliers while holding the LCD Click wheel in a depressed state. If you do not have
+   *                    an LCD, you must specify a value if you use P.
+   *
+   *   Q #  Multiplier  Retraction Multiplier. Normally not needed. Retraction defaults to 1.0mm and
+   *                    un-retraction is at 1.2mm   These numbers will be scaled by the specified amount
+   *
+   *   R #  Repeat      Prints the number of patterns given as a parameter, starting at the current location.
+   *                    If a parameter isn't given, every point will be printed unless G26 is interrupted.
+   *                    This works the same way that the UBL G29 P4 R parameter works.
+   *
+   *                    NOTE:  If you do not have an LCD, you -must- specify R. This is to ensure that you are
+   *                    aware that there's some risk associated with printing without the ability to abort in
+   *                    cases where mesh point Z value may be inaccurate. As above, if you do not include a
+   *                    parameter, every point will be printed.
+   *
+   *   S #  Nozzle      Used to control the size of nozzle diameter. If not specified, a .4mm nozzle is assumed.
+   *
+   *   U #  Random      Randomize the order that the circles are drawn on the bed. The search for the closest
+   *                    undrawn cicle is still done. But the distance to the location for each circle has a
+   *                    random number of the size specified added to it. Specifying S50 will give an interesting
+   *                    deviation from the normal behaviour on a 10 x 10 Mesh.
+   *
+   *   X #  X Coord.    Specify the starting location of the drawing activity.
+   *
+   *   Y #  Y Coord.    Specify the starting location of the drawing activity.
+   */
+
+  // External references
+
+  extern float feedrate_mm_s; // must set before calling prepare_move_to_destination
+  extern Planner planner;
+  #if ENABLED(ULTRA_LCD)
+    extern char lcd_status_message[];
+  #endif
+  extern float destination[XYZE];
+  void set_destination_to_current();
+  void prepare_move_to_destination();
+  inline void sync_plan_position_e() { planner.set_e_position_mm(current_position[E_AXIS]); }
+  inline void set_current_to_destination() { COPY(current_position, destination); }
+  #if ENABLED(NEWPANEL)
+    void lcd_setstatusPGM(const char* const message, const int8_t level);
+    void chirp_at_user();
+  #endif
+
+  // Private functions
+
+  static uint16_t circle_flags[16], horizontal_mesh_line_flags[16], vertical_mesh_line_flags[16];
+  float g26_e_axis_feedrate = 0.020,
+        random_deviation = 0.0;
+
+  static bool g26_retracted = false; // Track the retracted state of the nozzle so mismatched
+                                     // retracts/recovers won't result in a bad state.
+
+  float valid_trig_angle(float);
+
+  float unified_bed_leveling::g26_extrusion_multiplier,
+        unified_bed_leveling::g26_retraction_multiplier,
+        unified_bed_leveling::g26_nozzle,
+        unified_bed_leveling::g26_filament_diameter,
+        unified_bed_leveling::g26_layer_height,
+        unified_bed_leveling::g26_prime_length,
+        unified_bed_leveling::g26_x_pos,
+        unified_bed_leveling::g26_y_pos,
+        unified_bed_leveling::g26_ooze_amount;
+
+  int16_t unified_bed_leveling::g26_bed_temp,
+          unified_bed_leveling::g26_hotend_temp;
+
+  int8_t unified_bed_leveling::g26_prime_flag;
+
+  bool unified_bed_leveling::g26_continue_with_closest,
+       unified_bed_leveling::g26_keep_heaters_on;
+
+  int16_t unified_bed_leveling::g26_repeats;
+
+  void unified_bed_leveling::G26_line_to_destination(const float &feed_rate) {
+    const float save_feedrate = feedrate_mm_s;
+    feedrate_mm_s = feed_rate;      // use specified feed rate
+    prepare_move_to_destination();  // will ultimately call ubl.line_to_destination_cartesian or ubl.prepare_linear_move_to for UBL_DELTA
+    feedrate_mm_s = save_feedrate;  // restore global feed rate
+  }
+
+  #if ENABLED(NEWPANEL)
+    /**
+     * Detect ubl_lcd_clicked, debounce it, and return true for cancel
+     */
+    bool user_canceled() {
+      if (!ubl_lcd_clicked()) return false;
+      safe_delay(10);                       // Wait for click to settle
+
+      #if ENABLED(ULTRA_LCD)
+        lcd_setstatusPGM(PSTR("Mesh Validation Stopped."), 99);
+        lcd_quick_feedback();
+      #endif
+
+      while (!ubl_lcd_clicked()) idle();    // Wait for button release
+
+      // If the button is suddenly pressed again,
+      // ask the user to resolve the issue
+      lcd_setstatusPGM(PSTR("Release button"), 99); // will never appear...
+      while (ubl_lcd_clicked()) idle();             // unless this loop happens
+      lcd_reset_status();
+
+      return true;
+    }
+  #endif
+
+  /**
+   * G26: Mesh Validation Pattern generation.
+   *
+   * Used to interactively edit UBL's Mesh by placing the
+   * nozzle in a problem area and doing a G29 P4 R command.
+   */
+  void unified_bed_leveling::G26() {
+    SERIAL_ECHOLNPGM("G26 command started. Waiting for heater(s).");
+    float tmp, start_angle, end_angle;
+    int   i, xi, yi;
+    mesh_index_pair location;
+
+    // Don't allow Mesh Validation without homing first,
+    // or if the parameter parsing did not go OK, abort
+    if (axis_unhomed_error() || parse_G26_parameters()) return;
+
+    if (current_position[Z_AXIS] < Z_CLEARANCE_BETWEEN_PROBES) {
+      do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
+      stepper.synchronize();
+      set_current_to_destination();
+    }
+
+    if (turn_on_heaters()) goto LEAVE;
+
+    current_position[E_AXIS] = 0.0;
+    sync_plan_position_e();
+
+    if (g26_prime_flag && prime_nozzle()) goto LEAVE;
+
+    /**
+     *  Bed is preheated
+     *
+     *  Nozzle is at temperature
+     *
+     *  Filament is primed!
+     *
+     *  It's  "Show Time" !!!
+     */
+
+    ZERO(circle_flags);
+    ZERO(horizontal_mesh_line_flags);
+    ZERO(vertical_mesh_line_flags);
+
+    // Move nozzle to the specified height for the first layer
+    set_destination_to_current();
+    destination[Z_AXIS] = g26_layer_height;
+    move_to(destination, 0.0);
+    move_to(destination, g26_ooze_amount);
+
+    has_control_of_lcd_panel = true;
+    //debug_current_and_destination(PSTR("Starting G26 Mesh Validation Pattern."));
+
+    /**
+     * Declare and generate a sin() & cos() table to be used during the circle drawing. This will lighten
+     * the CPU load and make the arc drawing faster and more smooth
+     */
+    float sin_table[360 / 30 + 1], cos_table[360 / 30 + 1];
+    for (i = 0; i <= 360 / 30; i++) {
+      cos_table[i] = SIZE_OF_INTERSECTION_CIRCLES * cos(RADIANS(valid_trig_angle(i * 30.0)));
+      sin_table[i] = SIZE_OF_INTERSECTION_CIRCLES * sin(RADIANS(valid_trig_angle(i * 30.0)));
+    }
+
+    do {
+      location = g26_continue_with_closest
+        ? find_closest_circle_to_print(current_position[X_AXIS], current_position[Y_AXIS])
+        : find_closest_circle_to_print(g26_x_pos, g26_y_pos); // Find the closest Mesh Intersection to where we are now.
+
+      if (location.x_index >= 0 && location.y_index >= 0) {
+        const float circle_x = mesh_index_to_xpos(location.x_index),
+                    circle_y = mesh_index_to_ypos(location.y_index);
+
+        // If this mesh location is outside the printable_radius, skip it.
+
+        if (!position_is_reachable_raw_xy(circle_x, circle_y)) continue;
+
+        xi = location.x_index;  // Just to shrink the next few lines and make them easier to understand
+        yi = location.y_index;
+
+        if (g26_debug_flag) {
+          SERIAL_ECHOPAIR("   Doing circle at: (xi=", xi);
+          SERIAL_ECHOPAIR(", yi=", yi);
+          SERIAL_CHAR(')');
+          SERIAL_EOL();
+        }
+
+        start_angle = 0.0;    // assume it is going to be a full circle
+        end_angle   = 360.0;
+        if (xi == 0) {       // Check for bottom edge
+          start_angle = -90.0;
+          end_angle   =  90.0;
+          if (yi == 0)        // it is an edge, check for the two left corners
+            start_angle = 0.0;
+          else if (yi == GRID_MAX_POINTS_Y - 1)
+            end_angle = 0.0;
+        }
+        else if (xi == GRID_MAX_POINTS_X - 1) { // Check for top edge
+          start_angle =  90.0;
+          end_angle   = 270.0;
+          if (yi == 0)                  // it is an edge, check for the two right corners
+            end_angle = 180.0;
+          else if (yi == GRID_MAX_POINTS_Y - 1)
+            start_angle = 180.0;
+        }
+        else if (yi == 0) {
+          start_angle =   0.0;         // only do the top   side of the cirlce
+          end_angle   = 180.0;
+        }
+        else if (yi == GRID_MAX_POINTS_Y - 1) {
+          start_angle = 180.0;         // only do the bottom side of the cirlce
+          end_angle   = 360.0;
+        }
+
+        for (tmp = start_angle; tmp < end_angle - 0.1; tmp += 30.0) {
+
+          #if ENABLED(NEWPANEL)
+            if (user_canceled()) goto LEAVE;              // Check if the user wants to stop the Mesh Validation
+          #endif
+
+          int tmp_div_30 = tmp / 30.0;
+          if (tmp_div_30 < 0) tmp_div_30 += 360 / 30;
+          if (tmp_div_30 > 11) tmp_div_30 -= 360 / 30;
+
+          float x = circle_x + cos_table[tmp_div_30],    // for speed, these are now a lookup table entry
+                y = circle_y + sin_table[tmp_div_30],
+                xe = circle_x + cos_table[tmp_div_30 + 1],
+                ye = circle_y + sin_table[tmp_div_30 + 1];
+          #if IS_KINEMATIC
+            // Check to make sure this segment is entirely on the bed, skip if not.
+            if (!position_is_reachable_raw_xy(x, y) || !position_is_reachable_raw_xy(xe, ye)) continue;
+          #else                                              // not, we need to skip
+            x  = constrain(x, X_MIN_POS + 1, X_MAX_POS - 1); // This keeps us from bumping the endstops
+            y  = constrain(y, Y_MIN_POS + 1, Y_MAX_POS - 1);
+            xe = constrain(xe, X_MIN_POS + 1, X_MAX_POS - 1);
+            ye = constrain(ye, Y_MIN_POS + 1, Y_MAX_POS - 1);
+          #endif
+
+          //if (g26_debug_flag) {
+          //  char ccc, *cptr, seg_msg[50], seg_num[10];
+          //  strcpy(seg_msg, "   segment: ");
+          //  strcpy(seg_num, "    \n");
+          //  cptr = (char*) "01234567890ABCDEF????????";
+          //  ccc = cptr[tmp_div_30];
+          //  seg_num[1] = ccc;
+          //  strcat(seg_msg, seg_num);
+          //  debug_current_and_destination(seg_msg);
+          //}
+
+          print_line_from_here_to_there(LOGICAL_X_POSITION(x), LOGICAL_Y_POSITION(y), g26_layer_height, LOGICAL_X_POSITION(xe), LOGICAL_Y_POSITION(ye), g26_layer_height);
+
+        }
+        if (look_for_lines_to_connect())
+          goto LEAVE;
+      }
+    } while (--g26_repeats && location.x_index >= 0 && location.y_index >= 0);
+
+    LEAVE:
+    lcd_setstatusPGM(PSTR("Leaving G26"), -1);
+
+    retract_filament(destination);
+    destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES;
+
+    //debug_current_and_destination(PSTR("ready to do Z-Raise."));
+    move_to(destination, 0); // Raise the nozzle
+    //debug_current_and_destination(PSTR("done doing Z-Raise."));
+
+    destination[X_AXIS] = g26_x_pos;                                               // Move back to the starting position
+    destination[Y_AXIS] = g26_y_pos;
+    //destination[Z_AXIS] = Z_CLEARANCE_BETWEEN_PROBES;                        // Keep the nozzle where it is
+
+    move_to(destination, 0); // Move back to the starting position
+    //debug_current_and_destination(PSTR("done doing X/Y move."));
+
+    has_control_of_lcd_panel = false;     // Give back control of the LCD Panel!
+
+    if (!g26_keep_heaters_on) {
+      #if HAS_TEMP_BED
+        thermalManager.setTargetBed(0);
+      #endif
+      thermalManager.setTargetHotend(0, 0);
+    }
+  }
+
+  float valid_trig_angle(float d) {
+    while (d > 360.0) d -= 360.0;
+    while (d < 0.0) d += 360.0;
+    return d;
+  }
+
+  mesh_index_pair unified_bed_leveling::find_closest_circle_to_print(const float &X, const float &Y) {
+    float closest = 99999.99;
+    mesh_index_pair return_val;
+
+    return_val.x_index = return_val.y_index = -1;
+
+    for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) {
+      for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) {
+        if (!is_bit_set(circle_flags, i, j)) {
+          const float mx = mesh_index_to_xpos(i),  // We found a circle that needs to be printed
+                      my = mesh_index_to_ypos(j);
+
+          // Get the distance to this intersection
+          float f = HYPOT(X - mx, Y - my);
+
+          // It is possible that we are being called with the values
+          // to let us find the closest circle to the start position.
+          // But if this is not the case, add a small weighting to the
+          // distance calculation to help it choose a better place to continue.
+          f += HYPOT(g26_x_pos - mx, g26_y_pos - my) / 15.0;
+
+          // Add in the specified amount of Random Noise to our search
+          if (random_deviation > 1.0)
+            f += random(0.0, random_deviation);
+
+          if (f < closest) {
+            closest = f;              // We found a closer location that is still
+            return_val.x_index = i;   // un-printed  --- save the data for it
+            return_val.y_index = j;
+            return_val.distance = closest;
+          }
+        }
+      }
+    }
+    bit_set(circle_flags, return_val.x_index, return_val.y_index);   // Mark this location as done.
+    return return_val;
+  }
+
+  bool unified_bed_leveling::look_for_lines_to_connect() {
+    float sx, sy, ex, ey;
+
+    for (uint8_t i = 0; i < GRID_MAX_POINTS_X; i++) {
+      for (uint8_t j = 0; j < GRID_MAX_POINTS_Y; j++) {
+
+        #if ENABLED(NEWPANEL)
+          if (user_canceled()) return true;     // Check if the user wants to stop the Mesh Validation
+        #endif
+
+        if (i < GRID_MAX_POINTS_X) { // We can't connect to anything to the right than GRID_MAX_POINTS_X.
+                                     // This is already a half circle because we are at the edge of the bed.
+
+          if (is_bit_set(circle_flags, i, j) && is_bit_set(circle_flags, i + 1, j)) { // check if we can do a line to the left
+            if (!is_bit_set(horizontal_mesh_line_flags, i, j)) {
+
+              //
+              // We found two circles that need a horizontal line to connect them
+              // Print it!
+              //
+              sx = mesh_index_to_xpos(  i  ) + (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // right edge
+              ex = mesh_index_to_xpos(i + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // left edge
+
+              sx = constrain(sx, X_MIN_POS + 1, X_MAX_POS - 1);
+              sy = ey = constrain(mesh_index_to_ypos(j), Y_MIN_POS + 1, Y_MAX_POS - 1);
+              ex = constrain(ex, X_MIN_POS + 1, X_MAX_POS - 1);
+
+              if (position_is_reachable_raw_xy(sx, sy) && position_is_reachable_raw_xy(ex, ey)) {
+
+                if (g26_debug_flag) {
+                  SERIAL_ECHOPAIR(" Connecting with horizontal line (sx=", sx);
+                  SERIAL_ECHOPAIR(", sy=", sy);
+                  SERIAL_ECHOPAIR(") -> (ex=", ex);
+                  SERIAL_ECHOPAIR(", ey=", ey);
+                  SERIAL_CHAR(')');
+                  SERIAL_EOL();
+                  //debug_current_and_destination(PSTR("Connecting horizontal line."));
+                }
+
+                print_line_from_here_to_there(LOGICAL_X_POSITION(sx), LOGICAL_Y_POSITION(sy), g26_layer_height, LOGICAL_X_POSITION(ex), LOGICAL_Y_POSITION(ey), g26_layer_height);
+              }
+              bit_set(horizontal_mesh_line_flags, i, j);   // Mark it as done so we don't do it again, even if we skipped it
+            }
+          }
+
+          if (j < GRID_MAX_POINTS_Y) { // We can't connect to anything further back than GRID_MAX_POINTS_Y.
+                                           // This is already a half circle because we are at the edge  of the bed.
+
+            if (is_bit_set(circle_flags, i, j) && is_bit_set(circle_flags, i, j + 1)) { // check if we can do a line straight down
+              if (!is_bit_set( vertical_mesh_line_flags, i, j)) {
+                //
+                // We found two circles that need a vertical line to connect them
+                // Print it!
+                //
+                sy = mesh_index_to_ypos(  j  ) + (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // top edge
+                ey = mesh_index_to_ypos(j + 1) - (SIZE_OF_INTERSECTION_CIRCLES - (SIZE_OF_CROSSHAIRS)); // bottom edge
+
+                sx = ex = constrain(mesh_index_to_xpos(i), X_MIN_POS + 1, X_MAX_POS - 1);
+                sy = constrain(sy, Y_MIN_POS + 1, Y_MAX_POS - 1);
+                ey = constrain(ey, Y_MIN_POS + 1, Y_MAX_POS - 1);
+
+                if (position_is_reachable_raw_xy(sx, sy) && position_is_reachable_raw_xy(ex, ey)) {
+
+                  if (g26_debug_flag) {
+                    SERIAL_ECHOPAIR(" Connecting with vertical line (sx=", sx);
+                    SERIAL_ECHOPAIR(", sy=", sy);
+                    SERIAL_ECHOPAIR(") -> (ex=", ex);
+                    SERIAL_ECHOPAIR(", ey=", ey);
+                    SERIAL_CHAR(')');
+                    SERIAL_EOL();
+                    debug_current_and_destination(PSTR("Connecting vertical line."));
+                  }
+                  print_line_from_here_to_there(LOGICAL_X_POSITION(sx), LOGICAL_Y_POSITION(sy), g26_layer_height, LOGICAL_X_POSITION(ex), LOGICAL_Y_POSITION(ey), g26_layer_height);
+                }
+                bit_set(vertical_mesh_line_flags, i, j);   // Mark it as done so we don't do it again, even if skipped
+              }
+            }
+          }
+        }
+      }
+    }
+    return false;
+  }
+
+  void unified_bed_leveling::move_to(const float &x, const float &y, const float &z, const float &e_delta) {
+    float feed_value;
+    static float last_z = -999.99;
+
+    bool has_xy_component = (x != current_position[X_AXIS] || y != current_position[Y_AXIS]); // Check if X or Y is involved in the movement.
+
+    if (z != last_z) {
+      last_z = z;
+      feed_value = planner.max_feedrate_mm_s[Z_AXIS]/(3.0);  // Base the feed rate off of the configured Z_AXIS feed rate
+
+      destination[X_AXIS] = current_position[X_AXIS];
+      destination[Y_AXIS] = current_position[Y_AXIS];
+      destination[Z_AXIS] = z;                          // We know the last_z==z or we wouldn't be in this block of code.
+      destination[E_AXIS] = current_position[E_AXIS];
+
+      G26_line_to_destination(feed_value);
+
+      stepper.synchronize();
+      set_destination_to_current();
+    }
+
+    // Check if X or Y is involved in the movement.
+    // Yes: a 'normal' movement. No: a retract() or recover()
+    feed_value = has_xy_component ? PLANNER_XY_FEEDRATE() / 10.0 : planner.max_feedrate_mm_s[E_AXIS] / 1.5;
+
+    if (g26_debug_flag) SERIAL_ECHOLNPAIR("in move_to() feed_value for XY:", feed_value);
+
+    destination[X_AXIS] = x;
+    destination[Y_AXIS] = y;
+    destination[E_AXIS] += e_delta;
+
+    G26_line_to_destination(feed_value);
+
+    stepper.synchronize();
+    set_destination_to_current();
+
+  }
+
+  void unified_bed_leveling::retract_filament(const float where[XYZE]) {
+    if (!g26_retracted) { // Only retract if we are not already retracted!
+      g26_retracted = true;
+      move_to(where, -1.0 * g26_retraction_multiplier);
+    }
+  }
+
+  void unified_bed_leveling::recover_filament(const float where[XYZE]) {
+    if (g26_retracted) { // Only un-retract if we are retracted.
+      move_to(where, 1.2 * g26_retraction_multiplier);
+      g26_retracted = false;
+    }
+  }
+
+  /**
+   * print_line_from_here_to_there() takes two cartesian coordinates and draws a line from one
+   * to the other. But there are really three sets of coordinates involved. The first coordinate
+   * is the present location of the nozzle. We don't necessarily want to print from this location.
+   * We first need to move the nozzle to the start of line segment where we want to print. Once
+   * there, we can use the two coordinates supplied to draw the line.
+   *
+   * Note:  Although we assume the first set of coordinates is the start of the line and the second
+   * set of coordinates is the end of the line, it does not always work out that way. This function
+   * optimizes the movement to minimize the travel distance before it can start printing. This saves
+   * a lot of time and eliminates a lot of nonsensical movement of the nozzle. However, it does
+   * cause a lot of very little short retracement of th nozzle when it draws the very first line
+   * segment of a 'circle'. The time this requires is very short and is easily saved by the other
+   * cases where the optimization comes into play.
+   */
+  void unified_bed_leveling::print_line_from_here_to_there(const float &sx, const float &sy, const float &sz, const float &ex, const float &ey, const float &ez) {
+    const float dx_s = current_position[X_AXIS] - sx,   // find our distance from the start of the actual line segment
+                dy_s = current_position[Y_AXIS] - sy,
+                dist_start = HYPOT2(dx_s, dy_s),        // We don't need to do a sqrt(), we can compare the distance^2
+                                                        // to save computation time
+                dx_e = current_position[X_AXIS] - ex,   // find our distance from the end of the actual line segment
+                dy_e = current_position[Y_AXIS] - ey,
+                dist_end = HYPOT2(dx_e, dy_e),
+
+                line_length = HYPOT(ex - sx, ey - sy);
+
+    // If the end point of the line is closer to the nozzle, flip the direction,
+    // moving from the end to the start. On very small lines the optimization isn't worth it.
+    if (dist_end < dist_start && (SIZE_OF_INTERSECTION_CIRCLES) < FABS(line_length)) {
+      return print_line_from_here_to_there(ex, ey, ez, sx, sy, sz);
+    }
+
+    // Decide whether to retract & bump
+
+    if (dist_start > 2.0) {
+      retract_filament(destination);
+      //todo:  parameterize the bump height with a define
+      move_to(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS] + 0.500, 0.0);  // Z bump to minimize scraping
+      move_to(sx, sy, sz + 0.500, 0.0); // Get to the starting point with no extrusion while bumped
+    }
+
+    move_to(sx, sy, sz, 0.0); // Get to the starting point with no extrusion / un-Z bump
+
+    const float e_pos_delta = line_length * g26_e_axis_feedrate * g26_extrusion_multiplier;
+
+    recover_filament(destination);
+    move_to(ex, ey, ez, e_pos_delta);  // Get to the ending point with an appropriate amount of extrusion
+  }
+
+  /**
+   * This function used to be inline code in G26. But there are so many
+   * parameters it made sense to turn them into static globals and get
+   * this code out of sight of the main routine.
+   */
+  bool unified_bed_leveling::parse_G26_parameters() {
+
+    g26_extrusion_multiplier  = EXTRUSION_MULTIPLIER;
+    g26_retraction_multiplier = RETRACTION_MULTIPLIER;
+    g26_nozzle                = NOZZLE;
+    g26_filament_diameter     = FILAMENT;
+    g26_layer_height          = LAYER_HEIGHT;
+    g26_prime_length          = PRIME_LENGTH;
+    g26_bed_temp              = BED_TEMP;
+    g26_hotend_temp           = HOTEND_TEMP;
+    g26_prime_flag            = 0;
+
+    g26_ooze_amount           = parser.linearval('O', OOZE_AMOUNT);
+    g26_keep_heaters_on       = parser.boolval('K');
+    g26_continue_with_closest = parser.boolval('C');
+
+    if (parser.seenval('B')) {
+      g26_bed_temp = parser.value_celsius();
+      if (!WITHIN(g26_bed_temp, 15, 140)) {
+        SERIAL_PROTOCOLLNPGM("?Specified bed temperature not plausible.");
+        return UBL_ERR;
+      }
+    }
+
+    if (parser.seenval('L')) {
+      g26_layer_height = parser.value_linear_units();
+      if (!WITHIN(g26_layer_height, 0.0, 2.0)) {
+        SERIAL_PROTOCOLLNPGM("?Specified layer height not plausible.");
+        return UBL_ERR;
+      }
+    }
+
+    if (parser.seen('Q')) {
+      if (parser.has_value()) {
+        g26_retraction_multiplier = parser.value_float();
+        if (!WITHIN(g26_retraction_multiplier, 0.05, 15.0)) {
+          SERIAL_PROTOCOLLNPGM("?Specified Retraction Multiplier not plausible.");
+          return UBL_ERR;
+        }
+      }
+      else {
+        SERIAL_PROTOCOLLNPGM("?Retraction Multiplier must be specified.");
+        return UBL_ERR;
+      }
+    }
+
+    if (parser.seenval('S')) {
+      g26_nozzle = parser.value_float();
+      if (!WITHIN(g26_nozzle, 0.1, 1.0)) {
+        SERIAL_PROTOCOLLNPGM("?Specified nozzle size not plausible.");
+        return UBL_ERR;
+      }
+    }
+
+    if (parser.seen('P')) {
+      if (!parser.has_value()) {
+        #if ENABLED(NEWPANEL)
+          g26_prime_flag = -1;
+        #else
+          SERIAL_PROTOCOLLNPGM("?Prime length must be specified when not using an LCD.");
+          return UBL_ERR;
+        #endif
+      }
+      else {
+        g26_prime_flag++;
+        g26_prime_length = parser.value_linear_units();
+        if (!WITHIN(g26_prime_length, 0.0, 25.0)) {
+          SERIAL_PROTOCOLLNPGM("?Specified prime length not plausible.");
+          return UBL_ERR;
+        }
+      }
+    }
+
+    if (parser.seenval('F')) {
+      g26_filament_diameter = parser.value_linear_units();
+      if (!WITHIN(g26_filament_diameter, 1.0, 4.0)) {
+        SERIAL_PROTOCOLLNPGM("?Specified filament size not plausible.");
+        return UBL_ERR;
+      }
+    }
+    g26_extrusion_multiplier *= sq(1.75) / sq(g26_filament_diameter); // If we aren't using 1.75mm filament, we need to
+                                                                      // scale up or down the length needed to get the
+                                                                      // same volume of filament
+
+    g26_extrusion_multiplier *= g26_filament_diameter * sq(g26_nozzle) / sq(0.3); // Scale up by nozzle size
+
+    if (parser.seenval('H')) {
+      g26_hotend_temp = parser.value_celsius();
+      if (!WITHIN(g26_hotend_temp, 165, 280)) {
+        SERIAL_PROTOCOLLNPGM("?Specified nozzle temperature not plausible.");
+        return UBL_ERR;
+      }
+    }
+
+    if (parser.seen('U')) {
+      randomSeed(millis());
+      // This setting will persist for the next G26
+      random_deviation = parser.has_value() ? parser.value_float() : 50.0;
+    }
+
+    #if ENABLED(NEWPANEL)
+      g26_repeats = parser.intval('R', GRID_MAX_POINTS + 1);
+    #else
+      if (!parser.seen('R')) {
+        SERIAL_PROTOCOLLNPGM("?(R)epeat must be specified when not using an LCD.");
+        return UBL_ERR;
+      }
+      else
+        g26_repeats = parser.has_value() ? parser.value_int() : GRID_MAX_POINTS + 1;
+    #endif
+    if (g26_repeats < 1) {
+      SERIAL_PROTOCOLLNPGM("?(R)epeat value not plausible; must be at least 1.");
+      return UBL_ERR;
+    }
+
+    g26_x_pos = parser.linearval('X', current_position[X_AXIS]);
+    g26_y_pos = parser.linearval('Y', current_position[Y_AXIS]);
+    if (!position_is_reachable_xy(g26_x_pos, g26_y_pos)) {
+      SERIAL_PROTOCOLLNPGM("?Specified X,Y coordinate out of bounds.");
+      return UBL_ERR;
+    }
+
+    /**
+     * Wait until all parameters are verified before altering the state!
+     */
+    set_bed_leveling_enabled(!parser.seen('D'));
+
+    return UBL_OK;
+  }
+
+  #if ENABLED(NEWPANEL)
+    bool unified_bed_leveling::exit_from_g26() {
+      lcd_setstatusPGM(PSTR("Leaving G26"), -1);
+      while (ubl_lcd_clicked()) idle();
+      return UBL_ERR;
+    }
+  #endif
+
+  /**
+   * Turn on the bed and nozzle heat and
+   * wait for them to get up to temperature.
+   */
+  bool unified_bed_leveling::turn_on_heaters() {
+    millis_t next = millis() + 5000UL;
+    #if HAS_TEMP_BED
+      #if ENABLED(ULTRA_LCD)
+        if (g26_bed_temp > 25) {
+          lcd_setstatusPGM(PSTR("G26 Heating Bed."), 99);
+          lcd_quick_feedback();
+      #endif
+          has_control_of_lcd_panel = true;
+          thermalManager.setTargetBed(g26_bed_temp);
+          while (abs(thermalManager.degBed() - g26_bed_temp) > 3) {
+
+            #if ENABLED(NEWPANEL)
+              if (ubl_lcd_clicked()) return exit_from_g26();
+            #endif
+
+            if (ELAPSED(millis(), next)) {
+              next = millis() + 5000UL;
+              print_heaterstates();
+              SERIAL_EOL();
+            }
+            idle();
+          }
+      #if ENABLED(ULTRA_LCD)
+        }
+        lcd_setstatusPGM(PSTR("G26 Heating Nozzle."), 99);
+        lcd_quick_feedback();
+      #endif
+    #endif
+
+    // Start heating the nozzle and wait for it to reach temperature.
+    thermalManager.setTargetHotend(g26_hotend_temp, 0);
+    while (abs(thermalManager.degHotend(0) - g26_hotend_temp) > 3) {
+
+      #if ENABLED(NEWPANEL)
+        if (ubl_lcd_clicked()) return exit_from_g26();
+      #endif
+
+      if (ELAPSED(millis(), next)) {
+        next = millis() + 5000UL;
+        print_heaterstates();
+        SERIAL_EOL();
+      }
+      idle();
+    }
+
+    #if ENABLED(ULTRA_LCD)
+      lcd_reset_status();
+      lcd_quick_feedback();
+    #endif
+
+    return UBL_OK;
+  }
+
+  /**
+   * Prime the nozzle if needed. Return true on error.
+   */
+  bool unified_bed_leveling::prime_nozzle() {
+
+    #if ENABLED(NEWPANEL)
+      float Total_Prime = 0.0;
+
+      if (g26_prime_flag == -1) {  // The user wants to control how much filament gets purged
+
+        has_control_of_lcd_panel = true;
+        lcd_setstatusPGM(PSTR("User-Controlled Prime"), 99);
+        chirp_at_user();
+
+        set_destination_to_current();
+
+        recover_filament(destination); // Make sure G26 doesn't think the filament is retracted().
+
+        while (!ubl_lcd_clicked()) {
+          chirp_at_user();
+          destination[E_AXIS] += 0.25;
+          #ifdef PREVENT_LENGTHY_EXTRUDE
+            Total_Prime += 0.25;
+            if (Total_Prime >= EXTRUDE_MAXLENGTH) return UBL_ERR;
+          #endif
+          G26_line_to_destination(planner.max_feedrate_mm_s[E_AXIS] / 15.0);
+
+          stepper.synchronize();    // Without this synchronize, the purge is more consistent,
+                                    // but because the planner has a buffer, we won't be able
+                                    // to stop as quickly. So we put up with the less smooth
+                                    // action to give the user a more responsive 'Stop'.
+          set_destination_to_current();
+          idle();
+        }
+
+        while (ubl_lcd_clicked()) idle();           // Debounce Encoder Wheel
+
+        #if ENABLED(ULTRA_LCD)
+          strcpy_P(lcd_status_message, PSTR("Done Priming")); // We can't do lcd_setstatusPGM() without having it continue;
+                                                              // So... We cheat to get a message up.
+          lcd_setstatusPGM(PSTR("Done Priming"), 99);
+          lcd_quick_feedback();
+        #endif
+
+        has_control_of_lcd_panel = false;
+
+      }
+      else {
+    #else
+    {
+    #endif
+      #if ENABLED(ULTRA_LCD)
+        lcd_setstatusPGM(PSTR("Fixed Length Prime."), 99);
+        lcd_quick_feedback();
+      #endif
+      set_destination_to_current();
+      destination[E_AXIS] += g26_prime_length;
+      G26_line_to_destination(planner.max_feedrate_mm_s[E_AXIS] / 15.0);
+      stepper.synchronize();
+      set_destination_to_current();
+      retract_filament(destination);
+    }
+
+    return UBL_OK;
+  }
+
+#endif // AUTO_BED_LEVELING_UBL && UBL_G26_MESH_VALIDATION

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/I2CPositionEncoder.h

@@ -0,0 +1,359 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef I2CPOSENC_H
+#define I2CPOSENC_H
+
+#include "MarlinConfig.h"
+
+#if ENABLED(I2C_POSITION_ENCODERS)
+
+  #include "enum.h"
+  #include "macros.h"
+  #include "types.h"
+  #include <Wire.h>
+
+  //=========== Advanced / Less-Common Encoder Configuration Settings ==========
+
+  #define I2CPE_EC_THRESH_PROPORTIONAL                    // if enabled adjusts the error correction threshold
+                                                          // proportional to the current speed of the axis allows
+                                                          // for very small error margin at low speeds without
+                                                          // stuttering due to reading latency at high speeds
+
+  #define I2CPE_DEBUG                                     // enable encoder-related debug serial echos
+
+  #define I2CPE_REBOOT_TIME             5000              // time we wait for an encoder module to reboot
+                                                          // after changing address.
+
+  #define I2CPE_MAG_SIG_GOOD            0
+  #define I2CPE_MAG_SIG_MID             1
+  #define I2CPE_MAG_SIG_BAD             2
+  #define I2CPE_MAG_SIG_NF              255
+
+  #define I2CPE_REQ_REPORT              0
+  #define I2CPE_RESET_COUNT             1
+  #define I2CPE_SET_ADDR                2
+  #define I2CPE_SET_REPORT_MODE         3
+  #define I2CPE_CLEAR_EEPROM            4
+
+  #define I2CPE_LED_PAR_MODE            10
+  #define I2CPE_LED_PAR_BRT             11
+  #define I2CPE_LED_PAR_RATE            14
+
+  #define I2CPE_REPORT_DISTANCE         0
+  #define I2CPE_REPORT_STRENGTH         1
+  #define I2CPE_REPORT_VERSION          2
+
+  // Default I2C addresses
+  #define I2CPE_PRESET_ADDR_X           30
+  #define I2CPE_PRESET_ADDR_Y           31
+  #define I2CPE_PRESET_ADDR_Z           32
+  #define I2CPE_PRESET_ADDR_E           33
+
+  #define I2CPE_DEF_AXIS                X_AXIS
+  #define I2CPE_DEF_ADDR                I2CPE_PRESET_ADDR_X
+
+  // Error event counter; tracks how many times there is an error exceeding a certain threshold
+  #define I2CPE_ERR_CNT_THRESH          3.00
+  #define I2CPE_ERR_CNT_DEBOUNCE_MS     2000
+
+  #if ENABLED(I2CPE_ERR_ROLLING_AVERAGE)
+    #define I2CPE_ERR_ARRAY_SIZE        32
+  #endif
+
+  // Error Correction Methods
+  #define I2CPE_ECM_NONE                0
+  #define I2CPE_ECM_MICROSTEP           1
+  #define I2CPE_ECM_PLANNER             2
+  #define I2CPE_ECM_STALLDETECT         3
+
+  // Encoder types
+  #define I2CPE_ENC_TYPE_ROTARY         0
+  #define I2CPE_ENC_TYPE_LINEAR         1
+
+  // Parser
+  #define I2CPE_PARSE_ERR               1
+  #define I2CPE_PARSE_OK                0
+
+  #define LOOP_PE(VAR) LOOP_L_N(VAR, I2CPE_ENCODER_CNT)
+  #define CHECK_IDX() do{ if (!WITHIN(idx, 0, I2CPE_ENCODER_CNT - 1)) return; }while(0)
+
+  extern const char axis_codes[XYZE];
+
+  typedef union {
+    volatile int32_t val = 0;
+    uint8_t          bval[4];
+  } i2cLong;
+
+  class I2CPositionEncoder {
+  private:
+    AxisEnum  encoderAxis         = I2CPE_DEF_AXIS;
+
+    uint8_t   i2cAddress          = I2CPE_DEF_ADDR,
+              ecMethod            = I2CPE_DEF_EC_METHOD,
+              type                = I2CPE_DEF_TYPE,
+              H                   = I2CPE_MAG_SIG_NF;    // Magnetic field strength
+
+    int       encoderTicksPerUnit = I2CPE_DEF_ENC_TICKS_UNIT,
+              stepperTicks        = I2CPE_DEF_TICKS_REV,
+              errorCount          = 0,
+              errorPrev           = 0;
+
+    float     ecThreshold         = I2CPE_DEF_EC_THRESH;
+
+    bool      homed               = false,
+              trusted             = false,
+              initialised         = false,
+              active              = false,
+              invert              = false,
+              ec                  = true;
+
+    float     axisOffset          = 0;
+
+    int32_t   axisOffsetTicks     = 0,
+              zeroOffset          = 0,
+              lastPosition        = 0,
+              position;
+
+    millis_t  lastPositionTime    = 0,
+              nextErrorCountTime  = 0,
+              lastErrorTime;
+
+    //double        positionMm; //calculate
+
+    #if ENABLED(I2CPE_ERR_ROLLING_AVERAGE)
+      uint8_t errIdx = 0;
+      int     err[I2CPE_ERR_ARRAY_SIZE] = { 0 };
+    #endif
+
+    //float        positionMm; //calculate
+
+  public:
+    void init(const uint8_t address, const AxisEnum axis);
+    void reset();
+
+    void update();
+
+    void set_homed();
+
+    int32_t get_raw_count();
+
+    FORCE_INLINE float mm_from_count(const int32_t count) {
+      switch (type) {
+        default: return -1;
+        case I2CPE_ENC_TYPE_LINEAR:
+          return count / encoderTicksPerUnit;
+        case I2CPE_ENC_TYPE_ROTARY:
+          return (count * stepperTicks) / (encoderTicksPerUnit * planner.axis_steps_per_mm[encoderAxis]);
+      }
+    }
+
+    FORCE_INLINE float get_position_mm() { return mm_from_count(get_position()); }
+    FORCE_INLINE int32_t get_position() { return get_raw_count() - zeroOffset - axisOffsetTicks; }
+
+    int32_t get_axis_error_steps(const bool report);
+    float get_axis_error_mm(const bool report);
+
+    void calibrate_steps_mm(const uint8_t iter);
+
+    bool passes_test(const bool report);
+
+    bool test_axis(void);
+
+    FORCE_INLINE int get_error_count(void) { return errorCount; }
+    FORCE_INLINE void set_error_count(const int newCount) { errorCount = newCount; }
+
+    FORCE_INLINE uint8_t get_address() { return i2cAddress; }
+    FORCE_INLINE void set_address(const uint8_t addr) { i2cAddress = addr; }
+
+    FORCE_INLINE bool get_active(void) { return active; }
+    FORCE_INLINE void set_active(const bool a) { active = a; }
+
+    FORCE_INLINE void set_inverted(const bool i) { invert = i; }
+
+    FORCE_INLINE AxisEnum get_axis() { return encoderAxis; }
+
+    FORCE_INLINE bool get_ec_enabled() { return ec; }
+    FORCE_INLINE void set_ec_enabled(const bool enabled) { ec = enabled; }
+
+    FORCE_INLINE uint8_t get_ec_method() { return ecMethod; }
+    FORCE_INLINE void set_ec_method(const byte method) { ecMethod = method; }
+
+    FORCE_INLINE float get_ec_threshold() { return ecThreshold; }
+    FORCE_INLINE void set_ec_threshold(const float newThreshold) { ecThreshold = newThreshold; }
+
+    FORCE_INLINE int get_encoder_ticks_mm() {
+      switch (type) {
+        default: return 0;
+        case I2CPE_ENC_TYPE_LINEAR:
+          return encoderTicksPerUnit;
+        case I2CPE_ENC_TYPE_ROTARY:
+          return (int)((encoderTicksPerUnit / stepperTicks) * planner.axis_steps_per_mm[encoderAxis]);
+      }
+    }
+
+    FORCE_INLINE int get_ticks_unit() { return encoderTicksPerUnit; }
+    FORCE_INLINE void set_ticks_unit(const int ticks) { encoderTicksPerUnit = ticks; }
+
+    FORCE_INLINE uint8_t get_type() { return type; }
+    FORCE_INLINE void set_type(const byte newType) { type = newType; }
+
+    FORCE_INLINE int get_stepper_ticks() { return stepperTicks; }
+    FORCE_INLINE void set_stepper_ticks(const int ticks) { stepperTicks = ticks; }
+
+    FORCE_INLINE float get_axis_offset() { return axisOffset; }
+    FORCE_INLINE void set_axis_offset(const float newOffset) {
+      axisOffset = newOffset;
+      axisOffsetTicks = int32_t(axisOffset * get_encoder_ticks_mm());
+    }
+
+    FORCE_INLINE void set_current_position(const float newPositionMm) {
+      set_axis_offset(get_position_mm() - newPositionMm + axisOffset);
+    }
+  };
+
+  class I2CPositionEncodersMgr {
+  private:
+    static bool I2CPE_anyaxis;
+    static uint8_t I2CPE_addr, I2CPE_idx;
+
+  public:
+
+    static void init(void);
+
+    // consider only updating one endoder per call / tick if encoders become too time intensive
+    static void update(void) { LOOP_PE(i) encoders[i].update(); }
+
+    static void homed(const AxisEnum axis) {
+      LOOP_PE(i)
+        if (encoders[i].get_axis() == axis) encoders[i].set_homed();
+    }
+
+    static void report_position(const int8_t idx, const bool units, const bool noOffset);
+
+    static void report_status(const int8_t idx) {
+      CHECK_IDX();
+      SERIAL_ECHOPAIR("Encoder ",idx);
+      SERIAL_ECHOPGM(": ");
+      encoders[idx].get_raw_count();
+      encoders[idx].passes_test(true);
+    }
+
+    static void report_error(const int8_t idx) {
+      CHECK_IDX();
+      encoders[idx].get_axis_error_steps(true);
+    }
+
+    static void test_axis(const int8_t idx) {
+      CHECK_IDX();
+      encoders[idx].test_axis();
+    }
+
+    static void calibrate_steps_mm(const int8_t idx, const int iterations) {
+      CHECK_IDX();
+      encoders[idx].calibrate_steps_mm(iterations);
+    }
+
+    static void change_module_address(const uint8_t oldaddr, const uint8_t newaddr);
+    static void report_module_firmware(const uint8_t address);
+
+    static void report_error_count(const int8_t idx, const AxisEnum axis) {
+      CHECK_IDX();
+      SERIAL_ECHOPAIR("Error count on ", axis_codes[axis]);
+      SERIAL_ECHOLNPAIR(" axis is ", encoders[idx].get_error_count());
+    }
+
+    static void reset_error_count(const int8_t idx, const AxisEnum axis) {
+      CHECK_IDX();
+      encoders[idx].set_error_count(0);
+      SERIAL_ECHOPAIR("Error count on ", axis_codes[axis]);
+      SERIAL_ECHOLNPGM(" axis has been reset.");
+    }
+
+    static void enable_ec(const int8_t idx, const bool enabled, const AxisEnum axis) {
+      CHECK_IDX();
+      encoders[idx].set_ec_enabled(enabled);
+      SERIAL_ECHOPAIR("Error correction on ", axis_codes[axis]);
+      SERIAL_ECHOPGM(" axis is ");
+      serialprintPGM(encoders[idx].get_ec_enabled() ? PSTR("en") : PSTR("dis"));
+      SERIAL_ECHOLNPGM("abled.");
+    }
+
+    static void set_ec_threshold(const int8_t idx, const float newThreshold, const AxisEnum axis) {
+      CHECK_IDX();
+      encoders[idx].set_ec_threshold(newThreshold);
+      SERIAL_ECHOPAIR("Error correct threshold for ", axis_codes[axis]);
+      SERIAL_ECHOPAIR_F(" axis set to ", newThreshold);
+      SERIAL_ECHOLNPGM("mm.");
+    }
+
+    static void get_ec_threshold(const int8_t idx, const AxisEnum axis) {
+      CHECK_IDX();
+      const float threshold = encoders[idx].get_ec_threshold();
+      SERIAL_ECHOPAIR("Error correct threshold for ", axis_codes[axis]);
+      SERIAL_ECHOPAIR_F(" axis is ", threshold);
+      SERIAL_ECHOLNPGM("mm.");
+    }
+
+    static int8_t idx_from_axis(const AxisEnum axis) {
+      LOOP_PE(i)
+        if (encoders[i].get_axis() == axis) return i;
+      return -1;
+    }
+
+    static int8_t idx_from_addr(const uint8_t addr) {
+      LOOP_PE(i)
+        if (encoders[i].get_address() == addr) return i;
+      return -1;
+    }
+
+    static int8_t parse();
+
+    static void M860();
+    static void M861();
+    static void M862();
+    static void M863();
+    static void M864();
+    static void M865();
+    static void M866();
+    static void M867();
+    static void M868();
+    static void M869();
+
+    static I2CPositionEncoder encoders[I2CPE_ENCODER_CNT];
+  };
+
+  extern I2CPositionEncodersMgr I2CPEM;
+
+  FORCE_INLINE static void gcode_M860() { I2CPEM.M860(); }
+  FORCE_INLINE static void gcode_M861() { I2CPEM.M861(); }
+  FORCE_INLINE static void gcode_M862() { I2CPEM.M862(); }
+  FORCE_INLINE static void gcode_M863() { I2CPEM.M863(); }
+  FORCE_INLINE static void gcode_M864() { I2CPEM.M864(); }
+  FORCE_INLINE static void gcode_M865() { I2CPEM.M865(); }
+  FORCE_INLINE static void gcode_M866() { I2CPEM.M866(); }
+  FORCE_INLINE static void gcode_M867() { I2CPEM.M867(); }
+  FORCE_INLINE static void gcode_M868() { I2CPEM.M868(); }
+  FORCE_INLINE static void gcode_M869() { I2CPEM.M869(); }
+
+#endif //I2C_POSITION_ENCODERS
+#endif //I2CPOSENC_H

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/LiquidCrystalRus.cpp

@@ -1,389 +0,0 @@
-#include "LiquidCrystalRus.h"
-
-#include <stdio.h>
-#include <string.h>
-#include <inttypes.h>
-#include <avr/pgmspace.h>
-
-#if defined(ARDUINO) && ARDUINO >= 100
-  #include "Arduino.h"
-#else
-  #include "WProgram.h"
-#endif
-
-// it is a russian alphabet translation
-// except 0401 --> 0xa2 = ╗, 0451 --> 0xb5
-const PROGMEM uint8_t utf_recode[] = 
-       { 0x41,0xa0,0x42,0xa1,0xe0,0x45,0xa3,0xa4,0xa5,0xa6,0x4b,0xa7,0x4d,0x48,0x4f,
-         0xa8,0x50,0x43,0x54,0xa9,0xaa,0x58,0xe1,0xab,0xac,0xe2,0xad,0xae,0x62,0xaf,0xb0,0xb1,
-         0x61,0xb2,0xb3,0xb4,0xe3,0x65,0xb6,0xb7,0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0x6f,
-         0xbe,0x70,0x63,0xbf,0x79,0xe4,0x78,0xe5,0xc0,0xc1,0xe6,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7
-        };     
-
-// When the display powers up, it is configured as follows:
-//
-// 1. Display clear
-// 2. Function set: 
-//    DL = 1; 8-bit interface data 
-//    N = 0; 1-line display 
-//    F = 0; 5x8 dot character font 
-// 3. Display on/off control: 
-//    D = 0; Display off 
-//    C = 0; Cursor off 
-//    B = 0; Blinking off 
-// 4. Entry mode set: 
-//    I/D = 1; Increment by 1 
-//    S = 0; No shift 
-//
-// Note, however, that resetting the Arduino doesn't reset the LCD, so we
-// can't assume that it's in that state when a sketch starts (and the
-// LiquidCrystal constructor is called).
-// 
-// modified 27 Jul 2011
-// by Ilya V. Danilov http://mk90.ru/
-
-
-LiquidCrystalRus::LiquidCrystalRus(uint8_t rs, uint8_t rw, uint8_t enable,
-			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
-			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
-{
-  init(0, rs, rw, enable, d0, d1, d2, d3, d4, d5, d6, d7);
-}
-
-LiquidCrystalRus::LiquidCrystalRus(uint8_t rs, uint8_t enable,
-			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
-			     uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
-{
-  init(0, rs, 255, enable, d0, d1, d2, d3, d4, d5, d6, d7);
-}
-
-LiquidCrystalRus::LiquidCrystalRus(uint8_t rs, uint8_t rw, uint8_t enable,
-			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
-{
-  init(1, rs, rw, enable, d0, d1, d2, d3, 0, 0, 0, 0);
-}
-
-LiquidCrystalRus::LiquidCrystalRus(uint8_t rs,  uint8_t enable,
-			     uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3)
-{
-  init(1, rs, 255, enable, d0, d1, d2, d3, 0, 0, 0, 0);
-}
-
-void LiquidCrystalRus::init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
-			 uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
-			 uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7)
-{
-  _rs_pin = rs;
-  _rw_pin = rw;
-  _enable_pin = enable;
-  
-  _data_pins[0] = d0;
-  _data_pins[1] = d1;
-  _data_pins[2] = d2;
-  _data_pins[3] = d3; 
-  _data_pins[4] = d4;
-  _data_pins[5] = d5;
-  _data_pins[6] = d6;
-  _data_pins[7] = d7; 
-
-  pinMode(_rs_pin, OUTPUT);
-  // we can save 1 pin by not using RW. Indicate by passing 255 instead of pin#
-  if (_rw_pin != 255) { 
-    pinMode(_rw_pin, OUTPUT);
-  }
-  pinMode(_enable_pin, OUTPUT);
-  
-  if (fourbitmode)
-    _displayfunction = LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS;
-  else 
-    _displayfunction = LCD_8BITMODE | LCD_1LINE | LCD_5x8DOTS;
-  
-  begin(16, 1);  
-}
-
-void LiquidCrystalRus::begin(uint8_t cols, uint8_t lines, uint8_t dotsize) {
-  if (lines > 1) {
-    _displayfunction |= LCD_2LINE;
-  }
-  _numlines = lines;
-  _currline = 0;
-
-  // for some 1 line displays you can select a 10 pixel high font
-  if ((dotsize != 0) && (lines == 1)) {
-    _displayfunction |= LCD_5x10DOTS;
-  }
-
-  // SEE PAGE 45/46 FOR INITIALIZATION SPECIFICATION!
-  // according to datasheet, we need at least 40ms after power rises above 2.7V
-  // before sending commands. Arduino can turn on way befer 4.5V so we'll wait 50
-  delayMicroseconds(50000); 
-  // Now we pull both RS and R/W low to begin commands
-  digitalWrite(_rs_pin, LOW);
-  digitalWrite(_enable_pin, LOW);
-  if (_rw_pin != 255) { 
-    digitalWrite(_rw_pin, LOW);
-  }
-  
-  //put the LCD into 4 bit or 8 bit mode
-  if (! (_displayfunction & LCD_8BITMODE)) {
-    // this is according to the hitachi HD44780 datasheet
-    // figure 24, pg 46
-
-    // we start in 8bit mode, try to set 4 bit mode
-    writeNbits(0x03,4);
-    delayMicroseconds(4500); // wait min 4.1ms
-
-    // second try
-    writeNbits(0x03,4);
-    delayMicroseconds(4500); // wait min 4.1ms
-    
-    // third go!
-    writeNbits(0x03,4); 
-    delayMicroseconds(150);
-
-    // finally, set to 8-bit interface
-    writeNbits(0x02,4); 
-  } else {
-    // this is according to the hitachi HD44780 datasheet
-    // page 45 figure 23
-
-    // Send function set command sequence
-    command(LCD_FUNCTIONSET | _displayfunction);
-    delayMicroseconds(4500);  // wait more than 4.1ms
-
-    // second try
-    command(LCD_FUNCTIONSET | _displayfunction);
-    delayMicroseconds(150);
-
-    // third go
-    command(LCD_FUNCTIONSET | _displayfunction);
-  }
-
-  // finally, set # lines, font size, etc.
-  command(LCD_FUNCTIONSET | _displayfunction);  
-
-  // turn the display on with no cursor or blinking default
-  _displaycontrol = LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF;  
-  display();
-
-  // clear it off
-  clear();
-
-  // Initialize to default text direction (for romance languages)
-  _displaymode = LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT;
-  // set the entry mode
-  command(LCD_ENTRYMODESET | _displaymode);
-
-}
-
-void LiquidCrystalRus::setDRAMModel(uint8_t model) {
-  _dram_model = model;
-}
-
-/********** high level commands, for the user! */
-void LiquidCrystalRus::clear()
-{
-  command(LCD_CLEARDISPLAY);  // clear display, set cursor position to zero
-  delayMicroseconds(2000);  // this command takes a long time!
-}
-
-void LiquidCrystalRus::home()
-{
-  command(LCD_RETURNHOME);  // set cursor position to zero
-  delayMicroseconds(2000);  // this command takes a long time!
-}
-
-void LiquidCrystalRus::setCursor(uint8_t col, uint8_t row)
-{
-  int row_offsets[] = { 0x00, 0x40, 0x14, 0x54 };
-  if ( row >= _numlines ) {
-    row = _numlines-1;    // we count rows starting w/0
-  }
-  
-  command(LCD_SETDDRAMADDR | (col + row_offsets[row]));
-}
-
-// Turn the display on/off (quickly)
-void LiquidCrystalRus::noDisplay() {
-  _displaycontrol &= ~LCD_DISPLAYON;
-  command(LCD_DISPLAYCONTROL | _displaycontrol);
-}
-void LiquidCrystalRus::display() {
-  _displaycontrol |= LCD_DISPLAYON;
-  command(LCD_DISPLAYCONTROL | _displaycontrol);
-}
-
-// Turns the underline cursor on/off
-void LiquidCrystalRus::noCursor() {
-  _displaycontrol &= ~LCD_CURSORON;
-  command(LCD_DISPLAYCONTROL | _displaycontrol);
-}
-void LiquidCrystalRus::cursor() {
-  _displaycontrol |= LCD_CURSORON;
-  command(LCD_DISPLAYCONTROL | _displaycontrol);
-}
-
-// Turn on and off the blinking cursor
-void LiquidCrystalRus::noBlink() {
-  _displaycontrol &= ~LCD_BLINKON;
-  command(LCD_DISPLAYCONTROL | _displaycontrol);
-}
-void LiquidCrystalRus::blink() {
-  _displaycontrol |= LCD_BLINKON;
-  command(LCD_DISPLAYCONTROL | _displaycontrol);
-}
-
-// These commands scroll the display without changing the RAM
-void LiquidCrystalRus::scrollDisplayLeft(void) {
-  command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVELEFT);
-}
-void LiquidCrystalRus::scrollDisplayRight(void) {
-  command(LCD_CURSORSHIFT | LCD_DISPLAYMOVE | LCD_MOVERIGHT);
-}
-
-// This is for text that flows Left to Right
-void LiquidCrystalRus::leftToRight(void) {
-  _displaymode |= LCD_ENTRYLEFT;
-  command(LCD_ENTRYMODESET | _displaymode);
-}
-
-// This is for text that flows Right to Left
-void LiquidCrystalRus::rightToLeft(void) {
-  _displaymode &= ~LCD_ENTRYLEFT;
-  command(LCD_ENTRYMODESET | _displaymode);
-}
-
-// This will 'right justify' text from the cursor
-void LiquidCrystalRus::autoscroll(void) {
-  _displaymode |= LCD_ENTRYSHIFTINCREMENT;
-  command(LCD_ENTRYMODESET | _displaymode);
-}
-
-// This will 'left justify' text from the cursor
-void LiquidCrystalRus::noAutoscroll(void) {
-  _displaymode &= ~LCD_ENTRYSHIFTINCREMENT;
-  command(LCD_ENTRYMODESET | _displaymode);
-}
-
-// Allows us to fill the first 8 CGRAM locations
-// with custom characters
-void LiquidCrystalRus::createChar(uint8_t location, uint8_t charmap[]) {
-  location &= 0x7; // we only have 8 locations 0-7
-  command(LCD_SETCGRAMADDR | (location << 3));
-  for (int i=0; i<8; i++) {
-    write(charmap[i]);
-  }
-}
-
-/*********** mid level commands, for sending data/cmds */
-
-inline void LiquidCrystalRus::command(uint8_t value) {
-  send(value, LOW);
-}
-
-#if defined(ARDUINO) && ARDUINO >= 100
-  size_t LiquidCrystalRus::write(uint8_t value)
-#else
-  void   LiquidCrystalRus::write(uint8_t value)
-#endif
-{
-  uint8_t out_char=value;
-
-  if (_dram_model == LCD_DRAM_WH1601) {  
-    uint8_t ac=recv(LOW) & 0x7f;
-    if (ac>7 && ac<0x14) command(LCD_SETDDRAMADDR | (0x40+ac-8));
-  }
-
-  if (value>=0x80) { // UTF-8 handling
-    if (value >= 0xc0) {
-      utf_hi_char = value - 0xd0;
-    } else {
-      value &= 0x3f;
-      if (!utf_hi_char && (value == 1)) 
-        send(0xa2,HIGH); // ╗
-      else if ((utf_hi_char == 1) && (value == 0x11)) 
-        send(0xb5,HIGH); // ╦
-      else 
-        send(pgm_read_byte_near(utf_recode + value + (utf_hi_char<<6) - 0x10), HIGH);
-    }    
-  } else send(out_char, HIGH);
-#if defined(ARDUINO) && ARDUINO >= 100
-  return 1; // assume sucess 
-#endif
-}
-
-/************ low level data pushing commands **********/
-
-// write either command or data, with automatic 4/8-bit selection
-void LiquidCrystalRus::send(uint8_t value, uint8_t mode) {
-  digitalWrite(_rs_pin, mode);
-
-  // if there is a RW pin indicated, set it low to Write
-  if (_rw_pin != 255) { 
-    digitalWrite(_rw_pin, LOW);
-  }
-  
-  if (_displayfunction & LCD_8BITMODE) {
-    writeNbits(value,8); 
-  } else {
-    writeNbits(value>>4,4);
-    writeNbits(value,4);
-  }
-}
-
-// read  data, with automatic 4/8-bit selection
-uint8_t LiquidCrystalRus::recv(uint8_t mode) {
-  uint8_t retval;
-  digitalWrite(_rs_pin, mode);
-
-  // if there is a RW pin indicated, set it low to Write
-  if (_rw_pin != 255) { 
-    digitalWrite(_rw_pin, HIGH);
-  }
-  
-  if (_displayfunction & LCD_8BITMODE) {
-    retval = readNbits(8); 
-  } else {
-    retval = readNbits(4) << 4;
-    retval |= readNbits(4);
-  }
-  return retval;
-}
-void LiquidCrystalRus::pulseEnable() {
-  digitalWrite(_enable_pin, LOW);
-  delayMicroseconds(1);    
-  digitalWrite(_enable_pin, HIGH);
-  delayMicroseconds(1);    // enable pulse must be >450ns
-  digitalWrite(_enable_pin, LOW);
-  delayMicroseconds(100);   // commands need > 37us to settle
-}
-
-void LiquidCrystalRus::writeNbits(uint8_t value, uint8_t n) {
-  for (int i = 0; i < n; i++) {
-    pinMode(_data_pins[i], OUTPUT);
-    digitalWrite(_data_pins[i], (value >> i) & 0x01);
-  }
-
-  pulseEnable();
-}
-
-uint8_t LiquidCrystalRus::readNbits(uint8_t n) {
-  uint8_t retval=0;
-  for (int i = 0; i < n; i++) {
-    pinMode(_data_pins[i], INPUT);
-  }
-
-  digitalWrite(_enable_pin, LOW);
-  delayMicroseconds(1);    
-  digitalWrite(_enable_pin, HIGH);
-  delayMicroseconds(1);    // enable pulse must be >450ns
-  
-  for (int i = 0; i < n; i++) {
-    retval |= (digitalRead(_data_pins[i]) == HIGH)?(1 << i):0;
-  }
-
-  digitalWrite(_enable_pin, LOW);
-
-  return retval;
-}
-

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/LiquidCrystalRus.h

@@ -1,129 +0,0 @@
-//
-// based on LiquidCrystal library from ArduinoIDE, see http://arduino.cc
-//  modified 27 Jul 2011
-// by Ilya V. Danilov http://mk90.ru/
-// 
-
-#ifndef LiquidCrystalRus_h
-#define LiquidCrystalRus_h
-
-#include <inttypes.h>
-#include "Print.h"
-
-// commands
-#define LCD_CLEARDISPLAY 0x01
-#define LCD_RETURNHOME 0x02
-#define LCD_ENTRYMODESET 0x04
-#define LCD_DISPLAYCONTROL 0x08
-#define LCD_CURSORSHIFT 0x10
-#define LCD_FUNCTIONSET 0x20
-#define LCD_SETCGRAMADDR 0x40
-#define LCD_SETDDRAMADDR 0x80
-
-// flags for display entry mode
-#define LCD_ENTRYRIGHT 0x00
-#define LCD_ENTRYLEFT 0x02
-#define LCD_ENTRYSHIFTINCREMENT 0x01
-#define LCD_ENTRYSHIFTDECREMENT 0x00
-
-// flags for display on/off control
-#define LCD_DISPLAYON 0x04
-#define LCD_DISPLAYOFF 0x00
-#define LCD_CURSORON 0x02
-#define LCD_CURSOROFF 0x00
-#define LCD_BLINKON 0x01
-#define LCD_BLINKOFF 0x00
-
-// flags for display/cursor shift
-#define LCD_DISPLAYMOVE 0x08
-#define LCD_CURSORMOVE 0x00
-#define LCD_MOVERIGHT 0x04
-#define LCD_MOVELEFT 0x00
-
-// flags for function set
-#define LCD_8BITMODE 0x10
-#define LCD_4BITMODE 0x00
-#define LCD_2LINE 0x08
-#define LCD_1LINE 0x00
-#define LCD_5x10DOTS 0x04
-#define LCD_5x8DOTS 0x00
-
-// enum for 
-#define LCD_DRAM_Normal 0x00
-#define LCD_DRAM_WH1601 0x01
-
-
-class LiquidCrystalRus : public Print {
-public:
-  LiquidCrystalRus(uint8_t rs, uint8_t enable,
-		uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
-		uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7);
-  LiquidCrystalRus(uint8_t rs, uint8_t rw, uint8_t enable,
-		uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
-		uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7);
-  LiquidCrystalRus(uint8_t rs, uint8_t rw, uint8_t enable,
-		uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3);
-  LiquidCrystalRus(uint8_t rs, uint8_t enable,
-		uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3);
-
-  void init(uint8_t fourbitmode, uint8_t rs, uint8_t rw, uint8_t enable,
-	    uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3,
-	    uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7);
-    
-  void begin(uint8_t cols, uint8_t rows, uint8_t charsize = LCD_5x8DOTS);
-
-  void clear();
-  void home();
-
-  void noDisplay();
-  void display();
-  void noBlink();
-  void blink();
-  void noCursor();
-  void cursor();
-  void scrollDisplayLeft();
-  void scrollDisplayRight();
-  void leftToRight();
-  void rightToLeft();
-  void autoscroll();
-  void noAutoscroll();
-
-  void createChar(uint8_t, uint8_t[]);
-  void setCursor(uint8_t, uint8_t);
- 
-#if defined(ARDUINO) && ARDUINO >= 100
-  virtual size_t write(uint8_t);
-  using Print::write;
-#else
-  virtual void write(uint8_t);
-#endif
-
-  void command(uint8_t);
-
-  void setDRAMModel(uint8_t);
-
-private:
-  void send(uint8_t, uint8_t);
-  void writeNbits(uint8_t, uint8_t);
-  uint8_t recv(uint8_t);
-  uint8_t readNbits(uint8_t); 
-  void pulseEnable();
-
-  uint8_t _rs_pin; // LOW: command.  HIGH: character.
-  uint8_t _rw_pin; // LOW: write to LCD.  HIGH: read from LCD.
-  uint8_t _enable_pin; // activated by a HIGH pulse.
-  uint8_t _data_pins[8];
-
-  uint8_t _displayfunction;
-  uint8_t _displaycontrol;
-  uint8_t _displaymode;
-
-  uint8_t _initialized;
-
-  uint8_t _numlines,_currline;
-
-  uint8_t _dram_model;
-  uint8_t utf_hi_char; // UTF-8 high part
-};
-
-#endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/M100_Free_Mem_Chk.cpp

@@ -0,0 +1,333 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * M100 Free Memory Watcher
+ *
+ * This code watches the free memory block between the bottom of the heap and the top of the stack.
+ * This memory block is initialized and watched via the M100 command.
+ *
+ * M100 I   Initializes the free memory block and prints vitals statistics about the area
+ *
+ * M100 F   Identifies how much of the free memory block remains free and unused. It also
+ *          detects and reports any corruption within the free memory block that may have
+ *          happened due to errant firmware.
+ *
+ * M100 D   Does a hex display of the free memory block along with a flag for any errant
+ *          data that does not match the expected value.
+ *
+ * M100 C x Corrupts x locations within the free memory block. This is useful to check the
+ *          correctness of the M100 F and M100 D commands.
+ *
+ * Also, there are two support functions that can be called from a developer's C code.
+ *
+ *    uint16_t check_for_free_memory_corruption(const char * const ptr);
+ *    void M100_dump_routine(const char * const title, const char *start, const char *end);
+ *
+ * Initial version by Roxy-3D
+ */
+#define M100_FREE_MEMORY_DUMPER     // Enable for the `M110 D` Dump sub-command
+#define M100_FREE_MEMORY_CORRUPTOR  // Enable for the `M100 C` Corrupt sub-command
+
+#include "MarlinConfig.h"
+
+#if ENABLED(M100_FREE_MEMORY_WATCHER)
+
+#define TEST_BYTE ((char) 0xE5)
+
+extern char command_queue[BUFSIZE][MAX_CMD_SIZE];
+
+extern char* __brkval;
+extern size_t  __heap_start, __heap_end, __flp;
+extern char __bss_end;
+
+#include "Marlin.h"
+#include "gcode.h"
+#include "hex_print_routines.h"
+
+//
+// Utility functions
+//
+
+#define END_OF_HEAP() (__brkval ? __brkval : &__bss_end)
+int check_for_free_memory_corruption(const char * const title);
+
+// Location of a variable on its stack frame. Returns a value above
+// the stack (once the function returns to the caller).
+char* top_of_stack() {
+  char x;
+  return &x + 1; // x is pulled on return;
+}
+
+// Count the number of test bytes at the specified location.
+int16_t count_test_bytes(const char * const ptr) {
+  for (uint16_t i = 0; i < 32000; i++)
+    if (((char) ptr[i]) != TEST_BYTE)
+      return i - 1;
+
+  return -1;
+}
+
+//
+// M100 sub-commands
+//
+
+#if ENABLED(M100_FREE_MEMORY_DUMPER)
+  /**
+   * M100 D
+   *  Dump the free memory block from __brkval to the stack pointer.
+   *  malloc() eats memory from the start of the block and the stack grows
+   *  up from the bottom of the block. Solid test bytes indicate nothing has
+   *  used that memory yet. There should not be anything but test bytes within
+   *  the block. If so, it may indicate memory corruption due to a bad pointer.
+   *  Unexpected bytes are flagged in the right column.
+   */
+  void dump_free_memory(const char *ptr, const char *sp) {
+    //
+    // Start and end the dump on a nice 16 byte boundary
+    // (even though the values are not 16-byte aligned).
+    //
+    ptr = (char *)((uint16_t)ptr & 0xFFF0); // Align to 16-byte boundary
+    sp  = (char *)((uint16_t)sp  | 0x000F); // Align sp to the 15th byte (at or above sp)
+
+    // Dump command main loop
+    while (ptr < sp) {
+      print_hex_word((uint16_t)ptr);      // Print the address
+      SERIAL_CHAR(':');
+      for (uint8_t i = 0; i < 16; i++) {  // and 16 data bytes
+        if (i == 8) SERIAL_CHAR('-');
+        print_hex_byte(ptr[i]);
+        SERIAL_CHAR(' ');
+      }
+      safe_delay(25);
+      SERIAL_CHAR('|');                   // Point out non test bytes
+      for (uint8_t i = 0; i < 16; i++) {
+        char ccc = (char)ptr[i]; // cast to char before automatically casting to char on assignment, in case the compiler is broken
+        if (&ptr[i] >= (const char*)command_queue && &ptr[i] < (const char*)(command_queue + sizeof(command_queue))) { // Print out ASCII in the command buffer area
+          if (!WITHIN(ccc, ' ', 0x7E)) ccc = ' ';
+        }
+        else { // If not in the command buffer area, flag bytes that don't match the test byte
+          ccc = (ccc == TEST_BYTE) ? ' ' : '?';
+        }
+        SERIAL_CHAR(ccc);
+      }
+      SERIAL_EOL();
+      ptr += 16;
+      safe_delay(25);
+      idle();
+    }
+  }
+
+void M100_dump_routine(const char * const title, const char *start, const char *end) {
+  SERIAL_ECHOLN(title);
+  //
+  // Round the start and end locations to produce full lines of output
+  //
+  start = (char*)((uint16_t) start & 0xFFF0);
+  end   = (char*)((uint16_t) end   | 0x000F);
+  dump_free_memory(start, end);
+}
+
+#endif // M100_FREE_MEMORY_DUMPER
+
+/**
+ * M100 F
+ *  Return the number of free bytes in the memory pool,
+ *  with other vital statistics defining the pool.
+ */
+void free_memory_pool_report(char * const ptr, const int16_t size) {
+  int16_t max_cnt = -1, block_cnt = 0;
+  char *max_addr = NULL;
+  // Find the longest block of test bytes in the buffer
+  for (int16_t i = 0; i < size; i++) {
+    char *addr = ptr + i;
+    if (*addr == TEST_BYTE) {
+      const int16_t j = count_test_bytes(addr);
+      if (j > 8) {
+        SERIAL_ECHOPAIR("Found ", j);
+        SERIAL_ECHOLNPAIR(" bytes free at ", hex_address(addr));
+        if (j > max_cnt) {
+          max_cnt  = j;
+          max_addr = addr;
+        }
+        i += j;
+        block_cnt++;
+      }
+    }
+  }
+  if (block_cnt > 1) {
+    SERIAL_ECHOLNPGM("\nMemory Corruption detected in free memory area.");
+    SERIAL_ECHOPAIR("\nLargest free block is ", max_cnt);
+    SERIAL_ECHOLNPAIR(" bytes at ", hex_address(max_addr));
+  }
+  SERIAL_ECHOLNPAIR("check_for_free_memory_corruption() = ", check_for_free_memory_corruption("M100 F "));
+}
+
+#if ENABLED(M100_FREE_MEMORY_CORRUPTOR)
+  /**
+   * M100 C<num>
+   *  Corrupt <num> locations in the free memory pool and report the corrupt addresses.
+   *  This is useful to check the correctness of the M100 D and the M100 F commands.
+   */
+  void corrupt_free_memory(char *ptr, const uint16_t size) {
+    ptr += 8;
+    const uint16_t near_top = top_of_stack() - ptr - 250, // -250 to avoid interrupt activity that's altered the stack.
+                   j = near_top / (size + 1);
+
+    SERIAL_ECHOLNPGM("Corrupting free memory block.\n");
+    for (uint16_t i = 1; i <= size; i++) {
+      char * const addr = ptr + i * j;
+      *addr = i;
+      SERIAL_ECHOPAIR("\nCorrupting address: ", hex_address(addr));
+    }
+    SERIAL_EOL();
+  }
+#endif // M100_FREE_MEMORY_CORRUPTOR
+
+/**
+ * M100 I
+ *  Init memory for the M100 tests. (Automatically applied on the first M100.)
+ */
+void init_free_memory(char *ptr, int16_t size) {
+  SERIAL_ECHOLNPGM("Initializing free memory block.\n\n");
+
+  size -= 250;    // -250 to avoid interrupt activity that's altered the stack.
+  if (size < 0) {
+    SERIAL_ECHOLNPGM("Unable to initialize.\n");
+    return;
+  }
+
+  ptr += 8;       // move a few bytes away from the heap just because we don't want
+                  // to be altering memory that close to it.
+  memset(ptr, TEST_BYTE, size);
+
+  SERIAL_ECHO(size);
+  SERIAL_ECHOLNPGM(" bytes of memory initialized.\n");
+
+  for (int16_t i = 0; i < size; i++) {
+    if (ptr[i] != TEST_BYTE) {
+      SERIAL_ECHOPAIR("? address : ", hex_address(ptr + i));
+      SERIAL_ECHOLNPAIR("=", hex_byte(ptr[i]));
+      SERIAL_EOL();
+    }
+  }
+}
+
+/**
+ * M100: Free Memory Check
+ */
+void gcode_M100() {
+  SERIAL_ECHOPAIR("\n__brkval : ", hex_address(__brkval));
+  SERIAL_ECHOPAIR("\n__bss_end : ", hex_address(&__bss_end));
+
+  char *ptr = END_OF_HEAP(), *sp = top_of_stack();
+
+  SERIAL_ECHOPAIR("\nstart of free space : ", hex_address(ptr));
+  SERIAL_ECHOLNPAIR("\nStack Pointer : ", hex_address(sp));
+
+  // Always init on the first invocation of M100
+  static bool m100_not_initialized = true;
+  if (m100_not_initialized || parser.seen('I')) {
+    m100_not_initialized = false;
+    init_free_memory(ptr, sp - ptr);
+  }
+
+  #if ENABLED(M100_FREE_MEMORY_DUMPER)
+    if (parser.seen('D'))
+      return dump_free_memory(ptr, sp);
+  #endif
+
+  if (parser.seen('F'))
+    return free_memory_pool_report(ptr, sp - ptr);
+
+  #if ENABLED(M100_FREE_MEMORY_CORRUPTOR)
+
+    if (parser.seen('C'))
+      return corrupt_free_memory(ptr, parser.value_int());
+
+  #endif
+}
+
+int check_for_free_memory_corruption(const char * const title) {
+  SERIAL_ECHO(title);
+
+  char *ptr = END_OF_HEAP(), *sp = top_of_stack();
+  int n = sp - ptr;
+
+  SERIAL_ECHOPAIR("\nfmc() n=", n);
+  SERIAL_ECHOPAIR("\n&__brkval: ", hex_address(&__brkval));
+  SERIAL_ECHOPAIR("=",             hex_address(__brkval));
+  SERIAL_ECHOPAIR("\n__bss_end: ", hex_address(&__bss_end));
+  SERIAL_ECHOPAIR(" sp=",          hex_address(sp));
+
+  if (sp < ptr)  {
+    SERIAL_ECHOPGM(" sp < Heap ");
+    // SET_INPUT_PULLUP(63);           // if the developer has a switch wired up to their controller board
+    // safe_delay(5);                  // this code can be enabled to pause the display as soon as the
+    // while ( READ(63))               // malfunction is detected.   It is currently defaulting to a switch
+    //   idle();                       // being on pin-63 which is unassigend and available on most controller
+    // safe_delay(20);                 // boards.
+    // while ( !READ(63))
+    //   idle();
+    safe_delay(20);
+    #ifdef M100_FREE_MEMORY_DUMPER
+      M100_dump_routine("   Memory corruption detected with sp<Heap\n", (char*)0x1B80, (char*)0x21FF);
+    #endif
+  }
+
+  // Scan through the range looking for the biggest block of 0xE5's we can find
+  int block_cnt = 0;
+  for (int i = 0; i < n; i++) {
+    if (ptr[i] == TEST_BYTE) {
+      int16_t j = count_test_bytes(ptr + i);
+      if (j > 8) {
+        // SERIAL_ECHOPAIR("Found ", j);
+        // SERIAL_ECHOLNPAIR(" bytes free at ", hex_address(ptr + i));
+        i += j;
+        block_cnt++;
+        SERIAL_ECHOPAIR(" (", block_cnt);
+        SERIAL_ECHOPAIR(") found=", j);
+        SERIAL_ECHOPGM("   ");
+      }
+    }
+  }
+  SERIAL_ECHOPAIR("  block_found=", block_cnt);
+
+  if (block_cnt != 1 || __brkval != 0x0000)
+    SERIAL_ECHOLNPGM("\nMemory Corruption detected in free memory area.");
+
+  if (block_cnt == 0)       // Make sure the special case of no free blocks shows up as an
+    block_cnt = -1;         // error to the calling code!
+
+  SERIAL_ECHOPGM(" return=");
+  if (block_cnt == 1) {
+    SERIAL_CHAR('0');       // if the block_cnt is 1, nothing has broken up the free memory
+    SERIAL_EOL();             // area and it is appropriate to say 'no corruption'.
+    return 0;
+  }
+  SERIAL_ECHOLNPGM("true");
+  return block_cnt;
+}
+
+#endif // M100_FREE_MEMORY_WATCHER
+
+

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/Makefile

@@ -12,14 +12,14 @@
 #
 # Detailed instructions for using the makefile:
 #
-#  1. Modify the line containg "ARDUINO_INSTALL_DIR" to point to the directory that
+#  1. Modify the line containing "ARDUINO_INSTALL_DIR" to point to the directory that
 #     contains the Arduino installation (for example, under Mac OS X, this
 #     might be /Applications/Arduino.app/Contents/Resources/Java).
 #
 #  2. Modify the line containing "UPLOAD_PORT" to refer to the filename
 #     representing the USB or serial connection to your Arduino board
 #     (e.g. UPLOAD_PORT = /dev/tty.USB0).  If the exact name of this file
-#     changes, you can use * as a wildcard (e.g. UPLOAD_PORT = /dev/tty.usb*).
+#     changes, you can use * as a wild card (e.g. UPLOAD_PORT = /dev/tty.usb*).
 #
 #  3. Set the line containing "MCU" to match your board's processor.
 #     Older one's are atmega8 based, newer ones like Arduino Mini, Bluetooth
@@ -33,25 +33,47 @@
 #  5. Type "make upload", reset your Arduino board, and press enter to
 #     upload your program to the Arduino board.
 #
-# Note that all settings are set with ?=, this means you can override them
-# from the commandline with "make HARDWARE_MOTHERBOARD=71" for example
+# Note that all settings at the top of this file can be overriden from
+# the command line with, for example, "make HARDWARE_MOTHERBOARD=71"
+#
+# To compile for RAMPS (atmega2560) with Arduino 1.6.9 at root/arduino you would use...
+#
+#   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
+#   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino
+#
+# To compile and upload simply add "upload" to the end of the line...
+#
+#   make ARDUINO_VERSION=10609 AVR_TOOLS_PATH=/root/arduino/hardware/tools/avr/bin/ \
+#   HARDWARE_MOTHERBOARD=33 ARDUINO_INSTALL_DIR=/root/arduino upload
+#
+# If uploading doesn't work try adding the parameter "AVRDUDE_PROGRAMMER=wiring" or
+# start upload manually (using stk500) like so:
+#
+#   avrdude -C /root/arduino/hardware/tools/avr/etc/avrdude.conf -v -p m2560 -c stk500 \
+#   -U flash:w:applet/Marlin.hex:i -P /dev/ttyUSB0
+#
+# Or, try disconnecting USB to power down and then reconnecting before running avrdude.
+#
 
-# This defined the board you are compiling for (see Configuration.h for the options)
+# This defines the board to compile for (see boards.h for your board's ID)
 HARDWARE_MOTHERBOARD ?= 11
 
 # Arduino source install directory, and version number
-ARDUINO_INSTALL_DIR  ?= /Applications/Arduino.app/Contents/Resources/Java
-ARDUINO_VERSION      ?= 105
+# On most linuxes this will be /usr/share/arduino
+ARDUINO_INSTALL_DIR  ?= ${HOME}/Arduino
+ARDUINO_VERSION      ?= 106
 
 # You can optionally set a path to the avr-gcc tools. Requires a trailing slash. (ex: /usr/local/avr-gcc/bin)
 AVR_TOOLS_PATH ?=
 
 #Programmer configuration
-UPLOAD_RATE        ?= 115200
+UPLOAD_RATE        ?= 57600
 AVRDUDE_PROGRAMMER ?= arduino
-UPLOAD_PORT        ?= /dev/arduino
+# on most linuxes this will be /dev/ttyACM0 or /dev/ttyACM1
+UPLOAD_PORT        ?= /dev/ttyUSB0
 
-#Directory used to build files in, contains all the build files, from object files to the final hex file.
+#Directory used to build files in, contains all the build files, from object files to the final hex file
+#on linux it is best to put an absolute path like /home/username/tmp .
 BUILD_DIR          ?= applet
 
 # This defines whether Liquid_TWI2 support will be built
@@ -60,6 +82,13 @@ LIQUID_TWI2        ?= 0
 # this defines if Wire is needed
 WIRE               ?= 0
 
+# this defines if U8GLIB is needed (may require RELOC_WORKAROUND)
+U8GLIB             ?= 1
+
+# this defines whether to add a workaround for the avr-gcc relocation bug
+#	  https://www.stix.id.au/wiki/AVR_relocation_truncations_workaround
+RELOC_WORKAROUND   ?= 1
+
 ############################################################################
 # Below here nothing should be changed...
 
@@ -95,12 +124,30 @@ MCU              ?= atmega2560
 else ifeq  ($(HARDWARE_MOTHERBOARD),34)
 HARDWARE_VARIANT ?= arduino
 MCU              ?= atmega2560
-
-#Duemilanove w/ ATMega328P pin assignment
-else ifeq  ($(HARDWARE_MOTHERBOARD),4)
+else ifeq  ($(HARDWARE_MOTHERBOARD),35)
 HARDWARE_VARIANT ?= arduino
-HARDWARE_SUB_VARIANT ?= standard
-MCU              ?= atmega328p
+MCU              ?= atmega2560
+else ifeq  ($(HARDWARE_MOTHERBOARD),36)
+HARDWARE_VARIANT ?= arduino
+MCU              ?= atmega2560
+else ifeq  ($(HARDWARE_MOTHERBOARD),38)
+HARDWARE_VARIANT ?= arduino
+MCU              ?= atmega2560
+else ifeq  ($(HARDWARE_MOTHERBOARD),43)
+HARDWARE_VARIANT ?= arduino
+MCU              ?= atmega2560
+else ifeq  ($(HARDWARE_MOTHERBOARD),44)
+HARDWARE_VARIANT ?= arduino
+MCU              ?= atmega2560
+else ifeq  ($(HARDWARE_MOTHERBOARD),45)
+HARDWARE_VARIANT ?= arduino
+MCU              ?= atmega2560
+else ifeq  ($(HARDWARE_MOTHERBOARD),46)
+HARDWARE_VARIANT ?= arduino
+MCU              ?= atmega2560
+else ifeq  ($(HARDWARE_MOTHERBOARD),48)
+HARDWARE_VARIANT ?= arduino
+MCU              ?= atmega2560
 
 #Gen6
 else ifeq  ($(HARDWARE_MOTHERBOARD),5)
@@ -126,6 +173,9 @@ MCU              ?= atmega1284p
 else ifeq  ($(HARDWARE_MOTHERBOARD),66)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega1284p
+else ifeq  ($(HARDWARE_MOTHERBOARD),69)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega1284p
 
 #Ultimaker
 else ifeq  ($(HARDWARE_MOTHERBOARD),7)
@@ -142,6 +192,9 @@ MCU              ?= at90usb1286
 else ifeq  ($(HARDWARE_MOTHERBOARD),81)
 HARDWARE_VARIANT ?= Teensy
 MCU              ?= at90usb1286
+else ifeq  ($(HARDWARE_MOTHERBOARD),811)
+HARDWARE_VARIANT ?= Teensy
+MCU              ?= at90usb1286
 else ifeq  ($(HARDWARE_MOTHERBOARD),82)
 HARDWARE_VARIANT ?= Teensy
 MCU              ?= at90usb646
@@ -157,6 +210,11 @@ else ifeq  ($(HARDWARE_MOTHERBOARD),9)
 HARDWARE_VARIANT ?= Sanguino
 MCU              ?= atmega644p
 
+#Gen3 Monolithic Electronics
+else ifeq  ($(HARDWARE_MOTHERBOARD),22)
+HARDWARE_VARIANT ?= Sanguino
+MCU              ?= atmega644p
+
 #Megatronics
 else ifeq  ($(HARDWARE_MOTHERBOARD),70)
 HARDWARE_VARIANT ?= arduino
@@ -192,20 +250,10 @@ endif
 # Set to 16Mhz if not yet set.
 F_CPU ?= 16000000
 
-# Arduino containd the main source code for the Arduino
+# Arduino contained the main source code for the Arduino
 # Libraries, the "hardware variant" are for boards
 # that derives from that, and their source are present in
 # the main Marlin source directory
-ifeq ($(HARDWARE_VARIANT), arduino)
-HARDWARE_DIR = $(ARDUINO_INSTALL_DIR)/hardware
-else
-ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true)
-HARDWARE_DIR = ../ArduinoAddons/Arduino_1.x.x
-else
-HARDWARE_DIR = ../ArduinoAddons/Arduino_0.xx
-endif
-endif
-HARDWARE_SRC = $(HARDWARE_DIR)/$(HARDWARE_VARIANT)/cores/arduino
 
 TARGET = $(notdir $(CURDIR))
 
@@ -215,10 +263,11 @@ TARGET = $(notdir $(CURDIR))
 
 VPATH = .
 VPATH += $(BUILD_DIR)
-VPATH += $(HARDWARE_SRC)
-ifeq ($(HARDWARE_VARIANT), arduino)
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal
-VPATH += $(ARDUINO_INSTALL_DIR)/libraries/SPI
+VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
+
+VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
+VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
 ifeq ($(LIQUID_TWI2), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
@@ -228,39 +277,43 @@ ifeq ($(WIRE), 1)
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
 VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire/utility
 endif
-else
-VPATH += $(HARDWARE_DIR)/libraries/LiquidCrystal
-VPATH += $(HARDWARE_DIR)/libraries/SPI
-ifeq ($(LIQUID_TWI2), 1)
-VPATH += $(HARDWARE_DIR)/libraries/Wire
-VPATH += $(HARDWARE_DIR)/libraries/Wire/utility
-VPATH += $(HARDWARE_DIR)/libraries/LiquidTWI2
-endif
-ifeq ($(WIRE, 1)
-VPATH += $(HARDWARE_DIR)/libraries/Wire
-VPATH += $(HARDWARE_DIR)/libraries/Wire/utility
+ifeq ($(NEOPIXEL), 1)
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
 endif
+ifeq ($(U8GLIB), 1)
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib
+VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/utility
 endif
+
 ifeq ($(HARDWARE_VARIANT), arduino)
 HARDWARE_SUB_VARIANT ?= mega
-VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/variants/$(HARDWARE_SUB_VARIANT)
+VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/variants/$(HARDWARE_SUB_VARIANT)
+else
+ifeq ($(HARDWARE_VARIANT), Sanguino)
+VPATH += $(HARDWARE_DIR)/marlin/avr/variants/sanguino
 else
 HARDWARE_SUB_VARIANT ?= standard
 VPATH += $(HARDWARE_DIR)/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT)
 endif
+endif
 SRC = wiring.c \
 	wiring_analog.c wiring_digital.c \
 	wiring_pulse.c \
-	wiring_shift.c WInterrupts.c
+	wiring_shift.c WInterrupts.c hooks.c
 ifeq ($(HARDWARE_VARIANT), Teensy)
 SRC = wiring.c
 VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
 endif
-CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin_main.cpp	\
-	MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp SdFatUtil.cpp	\
-	SdFile.cpp SdVolume.cpp motion_control.cpp planner.cpp		\
-	stepper.cpp temperature.cpp cardreader.cpp ConfigurationStore.cpp \
-	watchdog.cpp SPI.cpp Servo.cpp Tone.cpp ultralcd.cpp digipot_mcp4451.cpp
+CXXSRC = WMath.cpp WString.cpp Print.cpp Marlin_main.cpp \
+	MarlinSerial.cpp Sd2Card.cpp SdBaseFile.cpp SdFatUtil.cpp \
+	SdFile.cpp SdVolume.cpp planner.cpp stepper.cpp \
+	temperature.cpp cardreader.cpp configuration_store.cpp \
+	watchdog.cpp SPI.cpp servo.cpp Tone.cpp ultralcd.cpp digipot_mcp4451.cpp \
+	dac_mcp4728.cpp vector_3.cpp least_squares_fit.cpp endstops.cpp stopwatch.cpp utility.cpp \
+	printcounter.cpp nozzle.cpp serial.cpp gcode.cpp Max7219_Debug_LEDs.cpp
+ifeq ($(NEOPIXEL), 1)
+CXXSRC += Adafruit_NeoPixel.cpp
+endif
 ifeq ($(LIQUID_TWI2), 0)
 CXXSRC += LiquidCrystal.cpp
 else
@@ -273,7 +326,16 @@ SRC += twi.c
 CXXSRC += Wire.cpp
 endif
 
-#Check for Arduino 1.0.0 or higher and use the correct sourcefiles for that version
+ifeq ($(U8GLIB), 1)
+SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_data.c
+endif
+
+ifeq ($(RELOC_WORKAROUND), 1)
+LD_PREFIX=-nodefaultlibs
+LD_SUFFIX=-lm -lgcc -lc -lgcc
+endif
+
+#Check for Arduino 1.0.0 or higher and use the correct source files for that version
 ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true)
 CXXSRC += main.cpp
 else
@@ -320,40 +382,38 @@ endif
 CINCS = ${addprefix -I ,${VPATH}}
 CXXINCS = ${addprefix -I ,${VPATH}}
 
-# Compiler flag to set the C Standard level.
-# c89   - "ANSI" C
-# gnu89 - c89 plus GCC extensions
-# c99   - ISO C99 standard (not yet fully implemented)
-# gnu99 - c99 plus GCC extensions
-#CSTANDARD = -std=gnu99
+# Compiler flag to set the C/CPP Standard level.
+CSTANDARD = -std=gnu99
+CXXSTANDARD = -std=gnu++11
 CDEBUG = -g$(DEBUG)
 CWARN = -Wall -Wstrict-prototypes
 CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct \
 	-fshort-enums -w -ffunction-sections -fdata-sections \
+	-flto \
 	-DARDUINO=$(ARDUINO_VERSION)
 ifneq ($(HARDWARE_MOTHERBOARD),)
 CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
 endif
 #CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
-CEXTRA = -fno-use-cxa-atexit
+CEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics
 
-CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING)
-CXXFLAGS :=         $(CDEFS) $(CINCS) -O$(OPT) -Wall    $(CEXTRA) $(CTUNING)
+CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING) $(CSTANDARD)
+CXXFLAGS :=         $(CDEFS) $(CINCS) -O$(OPT) -Wall    $(CEXTRA) $(CTUNING) $(CXXSTANDARD)
 #ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
 LDFLAGS = -lm
 
 
 # Programming support using avrdude. Settings and variables.
 AVRDUDE_PORT = $(UPLOAD_PORT)
-AVRDUDE_WRITE_FLASH = -U flash:w:$(BUILD_DIR)/$(TARGET).hex:i
+AVRDUDE_WRITE_FLASH = -Uflash:w:$(BUILD_DIR)/$(TARGET).hex:i
 ifeq ($(shell uname -s), Linux)
-AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avrdude.conf
+AVRDUDE_CONF = /etc/avrdude/avrdude.conf
 else
 AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
 endif
-AVRDUDE_FLAGS = -D -C $(AVRDUDE_CONF) \
-	-p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) \
-	-b $(UPLOAD_RATE)
+AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
+	-p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
+	-b$(UPLOAD_RATE)
 
 # Define all object files.
 OBJ = ${patsubst %.c, $(BUILD_DIR)/%.o, ${SRC}}
@@ -394,7 +454,7 @@ lss: $(BUILD_DIR)/$(TARGET).lss
 sym: $(BUILD_DIR)/$(TARGET).sym
 
 # Program the device.
-# Do not try to reset an arduino if it's not one
+# Do not try to reset an Arduino if it's not one
 upload: $(BUILD_DIR)/$(TARGET).hex
 ifeq (${AVRDUDE_PROGRAMMER}, arduino)
 	stty hup < $(UPLOAD_PORT); true
@@ -453,7 +513,7 @@ extcoff: $(TARGET).elf
 	# Link: create ELF output file from library.
 $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
 	$(Pecho) "  CXX   $@"
-	$P $(CC) $(ALL_CXXFLAGS) -Wl,--gc-sections -o $@ -L. $(OBJ) $(LDFLAGS)
+	$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -Wl,--gc-sections,--relax -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
 
 $(BUILD_DIR)/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
 	$(Pecho) "  CC    $<"

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/Marlin.h

@@ -1,11 +1,27 @@
-// Tonokip RepRap firmware rewrite based off of Hydra-mmm firmware.
-// Licence: GPL
-
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
 #ifndef MARLIN_H
 #define MARLIN_H
 
-#define  FORCE_INLINE __attribute__((always_inline)) inline
-
 #include <math.h>
 #include <stdio.h>
 #include <stdlib.h>
@@ -17,233 +33,469 @@
 #include <avr/eeprom.h>
 #include <avr/interrupt.h>
 
+#include "MarlinConfig.h"
 
-#include "fastio.h"
-#include "Configuration.h"
-#include "pins.h"
-
-#ifndef AT90USB
-#define  HardwareSerial_h // trick to disable the standard HWserial
+#ifdef DEBUG_GCODE_PARSER
+  #include "gcode.h"
 #endif
 
-typedef unsigned long millis_t;
+#include "enum.h"
+#include "types.h"
+#include "fastio.h"
+#include "utility.h"
+#include "serial.h"
 
-#if (ARDUINO >= 100)
-# include "Arduino.h"
+#if ENABLED(PRINTCOUNTER)
+  #include "printcounter.h"
 #else
-# include "WProgram.h"
-  //Arduino < 1.0.0 does not define this, so we need to do it ourselfs
-# define analogInputToDigitalPin(p) ((p) + A0)
+  #include "stopwatch.h"
 #endif
 
-#ifdef AT90USB
-#include "HardwareSerial.h"
-#endif
+void idle(
+  #if ENABLED(ADVANCED_PAUSE_FEATURE)
+    bool no_stepper_sleep = false  // pass true to keep steppers from disabling on timeout
+  #endif
+);
 
-#include "MarlinSerial.h"
+void manage_inactivity(bool ignore_stepper_queue = false);
 
-#ifndef cbi
-#define cbi(sfr, bit) (_SFR_BYTE(sfr) &= ~_BV(bit))
+#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+  extern bool extruder_duplication_enabled;
 #endif
-#ifndef sbi
-#define sbi(sfr, bit) (_SFR_BYTE(sfr) |= _BV(bit))
+
+#if HAS_X2_ENABLE
+  #define  enable_X() do{ X_ENABLE_WRITE( X_ENABLE_ON); X2_ENABLE_WRITE( X_ENABLE_ON); }while(0)
+  #define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); X2_ENABLE_WRITE(!X_ENABLE_ON); axis_known_position[X_AXIS] = false; }while(0)
+#elif HAS_X_ENABLE
+  #define  enable_X() X_ENABLE_WRITE( X_ENABLE_ON)
+  #define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); axis_known_position[X_AXIS] = false; }while(0)
+#else
+  #define  enable_X() NOOP
+  #define disable_X() NOOP
 #endif
 
-#include "WString.h"
+#if HAS_Y2_ENABLE
+  #define  enable_Y() do{ Y_ENABLE_WRITE( Y_ENABLE_ON); Y2_ENABLE_WRITE(Y_ENABLE_ON); }while(0)
+  #define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); Y2_ENABLE_WRITE(!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }while(0)
+#elif HAS_Y_ENABLE
+  #define  enable_Y() Y_ENABLE_WRITE( Y_ENABLE_ON)
+  #define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }while(0)
+#else
+  #define  enable_Y() NOOP
+  #define disable_Y() NOOP
+#endif
 
-#ifdef AT90USB
-   #ifdef BTENABLED
-         #define MYSERIAL bt
-   #else
-         #define MYSERIAL Serial
-   #endif // BTENABLED
+#if HAS_Z2_ENABLE
+  #define  enable_Z() do{ Z_ENABLE_WRITE( Z_ENABLE_ON); Z2_ENABLE_WRITE(Z_ENABLE_ON); }while(0)
+  #define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); Z2_ENABLE_WRITE(!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }while(0)
+#elif HAS_Z_ENABLE
+  #define  enable_Z() Z_ENABLE_WRITE( Z_ENABLE_ON)
+  #define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }while(0)
 #else
-  #define MYSERIAL MSerial
+  #define  enable_Z() NOOP
+  #define disable_Z() NOOP
 #endif
 
-#define SERIAL_PROTOCOL(x) (MYSERIAL.print(x))
-#define SERIAL_PROTOCOL_F(x,y) (MYSERIAL.print(x,y))
-#define SERIAL_PROTOCOLPGM(x) (serialprintPGM(PSTR(x)))
-#define SERIAL_PROTOCOLLN(x) (MYSERIAL.print(x),MYSERIAL.write('\n'))
-#define SERIAL_PROTOCOLLNPGM(x) (serialprintPGM(PSTR(x)),MYSERIAL.write('\n'))
+#if ENABLED(MIXING_EXTRUDER)
+
+  /**
+   * Mixing steppers synchronize their enable (and direction) together
+   */
+  #if MIXING_STEPPERS > 3
+    #define  enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); }
+    #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); }
+  #elif MIXING_STEPPERS > 2
+    #define  enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); }
+    #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); }
+  #else
+    #define  enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); }
+    #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); }
+  #endif
+  #define  enable_E1() NOOP
+  #define disable_E1() NOOP
+  #define  enable_E2() NOOP
+  #define disable_E2() NOOP
+  #define  enable_E3() NOOP
+  #define disable_E3() NOOP
+  #define  enable_E4() NOOP
+  #define disable_E4() NOOP
+
+#else // !MIXING_EXTRUDER
+
+  #if HAS_E0_ENABLE
+    #define  enable_E0() E0_ENABLE_WRITE( E_ENABLE_ON)
+    #define disable_E0() E0_ENABLE_WRITE(!E_ENABLE_ON)
+  #else
+    #define  enable_E0() NOOP
+    #define disable_E0() NOOP
+  #endif
 
+  #if E_STEPPERS > 1 && HAS_E1_ENABLE
+    #define  enable_E1() E1_ENABLE_WRITE( E_ENABLE_ON)
+    #define disable_E1() E1_ENABLE_WRITE(!E_ENABLE_ON)
+  #else
+    #define  enable_E1() NOOP
+    #define disable_E1() NOOP
+  #endif
 
-const char errormagic[] PROGMEM ="Error:";
-const char echomagic[] PROGMEM ="echo:";
-#define SERIAL_ERROR_START (serialprintPGM(errormagic))
-#define SERIAL_ERROR(x) SERIAL_PROTOCOL(x)
-#define SERIAL_ERRORPGM(x) SERIAL_PROTOCOLPGM(x)
-#define SERIAL_ERRORLN(x) SERIAL_PROTOCOLLN(x)
-#define SERIAL_ERRORLNPGM(x) SERIAL_PROTOCOLLNPGM(x)
+  #if E_STEPPERS > 2 && HAS_E2_ENABLE
+    #define  enable_E2() E2_ENABLE_WRITE( E_ENABLE_ON)
+    #define disable_E2() E2_ENABLE_WRITE(!E_ENABLE_ON)
+  #else
+    #define  enable_E2() NOOP
+    #define disable_E2() NOOP
+  #endif
 
-#define SERIAL_ECHO_START (serialprintPGM(echomagic))
-#define SERIAL_ECHO(x) SERIAL_PROTOCOL(x)
-#define SERIAL_ECHOPGM(x) SERIAL_PROTOCOLPGM(x)
-#define SERIAL_ECHOLN(x) SERIAL_PROTOCOLLN(x)
-#define SERIAL_ECHOLNPGM(x) SERIAL_PROTOCOLLNPGM(x)
+  #if E_STEPPERS > 3 && HAS_E3_ENABLE
+    #define  enable_E3() E3_ENABLE_WRITE( E_ENABLE_ON)
+    #define disable_E3() E3_ENABLE_WRITE(!E_ENABLE_ON)
+  #else
+    #define  enable_E3() NOOP
+    #define disable_E3() NOOP
+  #endif
 
-#define SERIAL_ECHOPAIR(name,value) (serial_echopair_P(PSTR(name),(value)))
+  #if E_STEPPERS > 4 && HAS_E4_ENABLE
+    #define  enable_E4() E4_ENABLE_WRITE( E_ENABLE_ON)
+    #define disable_E4() E4_ENABLE_WRITE(!E_ENABLE_ON)
+  #else
+    #define  enable_E4() NOOP
+    #define disable_E4() NOOP
+  #endif
 
-void serial_echopair_P(const char *s_P, float v);
-void serial_echopair_P(const char *s_P, double v);
-void serial_echopair_P(const char *s_P, unsigned long v);
+#endif // !MIXING_EXTRUDER
 
+#if ENABLED(G38_PROBE_TARGET)
+  extern bool G38_move,        // flag to tell the interrupt handler that a G38 command is being run
+              G38_endstop_hit; // flag from the interrupt handler to indicate if the endstop went active
+#endif
 
-//things to write to serial from Programmemory. saves 400 to 2k of RAM.
-FORCE_INLINE void serialprintPGM(const char *str)
-{
-  char ch=pgm_read_byte(str);
-  while(ch)
-  {
-    MYSERIAL.write(ch);
-    ch=pgm_read_byte(++str);
-  }
-}
+/**
+ * The axis order in all axis related arrays is X, Y, Z, E
+ */
+#define _AXIS(AXIS) AXIS ##_AXIS
 
+void enable_all_steppers();
+void disable_e_steppers();
+void disable_all_steppers();
 
-void get_command();
-void process_commands();
+void FlushSerialRequestResend();
+void ok_to_send();
 
-void manage_inactivity();
+void kill(const char*);
 
-#if defined(DUAL_X_CARRIAGE) && defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1 \
-    && defined(X2_ENABLE_PIN) && X2_ENABLE_PIN > -1
-  #define  enable_x() do { WRITE(X_ENABLE_PIN, X_ENABLE_ON); WRITE(X2_ENABLE_PIN, X_ENABLE_ON); } while (0)
-  #define disable_x() do { WRITE(X_ENABLE_PIN,!X_ENABLE_ON); WRITE(X2_ENABLE_PIN,!X_ENABLE_ON); axis_known_position[X_AXIS] = false; } while (0)
-#elif defined(X_ENABLE_PIN) && X_ENABLE_PIN > -1
-  #define  enable_x() WRITE(X_ENABLE_PIN, X_ENABLE_ON)
-  #define disable_x() { WRITE(X_ENABLE_PIN,!X_ENABLE_ON); axis_known_position[X_AXIS] = false; }
-#else
-  #define enable_x() ;
-  #define disable_x() ;
+void quickstop_stepper();
+
+#if ENABLED(FILAMENT_RUNOUT_SENSOR)
+  void handle_filament_runout();
 #endif
 
-#if defined(Y_ENABLE_PIN) && Y_ENABLE_PIN > -1
-  #ifdef Y_DUAL_STEPPER_DRIVERS
-    #define  enable_y() { WRITE(Y_ENABLE_PIN, Y_ENABLE_ON); WRITE(Y2_ENABLE_PIN,  Y_ENABLE_ON); }
-    #define disable_y() { WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON); WRITE(Y2_ENABLE_PIN, !Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }
-  #else
-    #define  enable_y() WRITE(Y_ENABLE_PIN, Y_ENABLE_ON)
-    #define disable_y() { WRITE(Y_ENABLE_PIN,!Y_ENABLE_ON); axis_known_position[Y_AXIS] = false; }
-  #endif
-#else
-  #define enable_y() ;
-  #define disable_y() ;
+extern uint8_t marlin_debug_flags;
+#define DEBUGGING(F) (marlin_debug_flags & (DEBUG_## F))
+
+extern bool Running;
+inline bool IsRunning() { return  Running; }
+inline bool IsStopped() { return !Running; }
+
+bool enqueue_and_echo_command(const char* cmd, bool say_ok=false); // Add a single command to the end of the buffer. Return false on failure.
+void enqueue_and_echo_commands_P(const char * const cmd);          // Set one or more commands to be prioritized over the next Serial/SD command.
+void clear_command_queue();
+
+extern millis_t previous_cmd_ms;
+inline void refresh_cmd_timeout() { previous_cmd_ms = millis(); }
+
+#if ENABLED(FAST_PWM_FAN)
+  void setPwmFrequency(uint8_t pin, int val);
 #endif
 
-#if defined(Z_ENABLE_PIN) && Z_ENABLE_PIN > -1
-  #ifdef Z_DUAL_STEPPER_DRIVERS
-    #define  enable_z() { WRITE(Z_ENABLE_PIN, Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN, Z_ENABLE_ON); }
-    #define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); WRITE(Z2_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
-  #else
-    #define  enable_z() WRITE(Z_ENABLE_PIN, Z_ENABLE_ON)
-    #define disable_z() { WRITE(Z_ENABLE_PIN,!Z_ENABLE_ON); axis_known_position[Z_AXIS] = false; }
+/**
+ * Feedrate scaling and conversion
+ */
+extern int16_t feedrate_percentage;
+
+#define MMM_TO_MMS(MM_M) ((MM_M)/60.0)
+#define MMS_TO_MMM(MM_S) ((MM_S)*60.0)
+#define MMS_SCALED(MM_S) ((MM_S)*feedrate_percentage*0.01)
+
+extern bool axis_relative_modes[];
+extern bool volumetric_enabled;
+extern int16_t flow_percentage[EXTRUDERS]; // Extrusion factor for each extruder
+extern float filament_size[EXTRUDERS]; // cross-sectional area of filament (in millimeters), typically around 1.75 or 2.85, 0 disables the volumetric calculations for the extruder.
+extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner
+extern bool axis_known_position[XYZ];
+extern bool axis_homed[XYZ];
+extern volatile bool wait_for_heatup;
+
+#if HAS_RESUME_CONTINUE
+  extern volatile bool wait_for_user;
+#endif
+
+extern float current_position[NUM_AXIS];
+
+// Workspace offsets
+#if HAS_WORKSPACE_OFFSET
+  #if HAS_HOME_OFFSET
+    extern float home_offset[XYZ];
+  #endif
+  #if HAS_POSITION_SHIFT
+    extern float position_shift[XYZ];
   #endif
-#else
-  #define enable_z() ;
-  #define disable_z() ;
 #endif
 
-#if defined(E0_ENABLE_PIN) && (E0_ENABLE_PIN > -1)
-  #define enable_e0() WRITE(E0_ENABLE_PIN, E_ENABLE_ON)
-  #define disable_e0() WRITE(E0_ENABLE_PIN,!E_ENABLE_ON)
+#if HAS_HOME_OFFSET && HAS_POSITION_SHIFT
+  extern float workspace_offset[XYZ];
+  #define WORKSPACE_OFFSET(AXIS) workspace_offset[AXIS]
+#elif HAS_HOME_OFFSET
+  #define WORKSPACE_OFFSET(AXIS) home_offset[AXIS]
+#elif HAS_POSITION_SHIFT
+  #define WORKSPACE_OFFSET(AXIS) position_shift[AXIS]
 #else
-  #define enable_e0()  /* nothing */
-  #define disable_e0() /* nothing */
+  #define WORKSPACE_OFFSET(AXIS) 0
 #endif
 
-#if (EXTRUDERS > 1) && defined(E1_ENABLE_PIN) && (E1_ENABLE_PIN > -1)
-  #define enable_e1() WRITE(E1_ENABLE_PIN, E_ENABLE_ON)
-  #define disable_e1() WRITE(E1_ENABLE_PIN,!E_ENABLE_ON)
+#define LOGICAL_POSITION(POS, AXIS) ((POS) + WORKSPACE_OFFSET(AXIS))
+#define RAW_POSITION(POS, AXIS)     ((POS) - WORKSPACE_OFFSET(AXIS))
+
+#if HAS_POSITION_SHIFT || DISABLED(DELTA)
+  #define LOGICAL_X_POSITION(POS)   LOGICAL_POSITION(POS, X_AXIS)
+  #define LOGICAL_Y_POSITION(POS)   LOGICAL_POSITION(POS, Y_AXIS)
+  #define RAW_X_POSITION(POS)       RAW_POSITION(POS, X_AXIS)
+  #define RAW_Y_POSITION(POS)       RAW_POSITION(POS, Y_AXIS)
 #else
-  #define enable_e1()  /* nothing */
-  #define disable_e1() /* nothing */
+  #define LOGICAL_X_POSITION(POS)   (POS)
+  #define LOGICAL_Y_POSITION(POS)   (POS)
+  #define RAW_X_POSITION(POS)       (POS)
+  #define RAW_Y_POSITION(POS)       (POS)
+#endif
+
+#define LOGICAL_Z_POSITION(POS)     LOGICAL_POSITION(POS, Z_AXIS)
+#define RAW_Z_POSITION(POS)         RAW_POSITION(POS, Z_AXIS)
+#define RAW_CURRENT_POSITION(A)     RAW_##A##_POSITION(current_position[A##_AXIS])
+
+// Hotend Offsets
+#if HOTENDS > 1
+  extern float hotend_offset[XYZ][HOTENDS];
 #endif
 
-#if (EXTRUDERS > 2) && defined(E2_ENABLE_PIN) && (E2_ENABLE_PIN > -1)
-  #define enable_e2() WRITE(E2_ENABLE_PIN, E_ENABLE_ON)
-  #define disable_e2() WRITE(E2_ENABLE_PIN,!E_ENABLE_ON)
+// Software Endstops
+extern float soft_endstop_min[XYZ], soft_endstop_max[XYZ];
+
+#if HAS_SOFTWARE_ENDSTOPS
+  extern bool soft_endstops_enabled;
+  void clamp_to_software_endstops(float target[XYZ]);
 #else
-  #define enable_e2()  /* nothing */
-  #define disable_e2() /* nothing */
+  #define soft_endstops_enabled false
+  #define clamp_to_software_endstops(x) NOOP
 #endif
 
+#if HAS_WORKSPACE_OFFSET || ENABLED(DUAL_X_CARRIAGE)
+  void update_software_endstops(const AxisEnum axis);
+#endif
 
-enum AxisEnum {X_AXIS=0, Y_AXIS=1, Z_AXIS=2, E_AXIS=3};
+#if IS_KINEMATIC
+  extern float delta[ABC];
+  void inverse_kinematics(const float logical[XYZ]);
+#endif
 
+#if ENABLED(DELTA)
+  extern float endstop_adj[ABC],
+               delta_radius,
+               delta_diagonal_rod,
+               delta_calibration_radius,
+               delta_segments_per_second,
+               delta_tower_angle_trim[ABC],
+               delta_clip_start_height;
+  void recalc_delta_settings(float radius, float diagonal_rod, float tower_angle_trim[ABC]);
+#elif IS_SCARA
+  void forward_kinematics_SCARA(const float &a, const float &b);
+#endif
 
-void FlushSerialRequestResend();
-void ClearToSend();
+#if ENABLED(AUTO_BED_LEVELING_BILINEAR)
+  extern int bilinear_grid_spacing[2], bilinear_start[2];
+  extern float bilinear_grid_factor[2],
+               z_values[GRID_MAX_POINTS_X][GRID_MAX_POINTS_Y];
+  float bilinear_z_offset(const float logical[XYZ]);
+#endif
 
-void get_coordinates();
-#ifdef DELTA
-void calculate_delta(float cartesian[3]);
-extern float delta[3];
+#if ENABLED(AUTO_BED_LEVELING_UBL)
+  typedef struct { double A, B, D; } linear_fit;
+  linear_fit* lsf_linear_fit(double x[], double y[], double z[], const int);
 #endif
-void prepare_move();
-void kill();
-void Stop();
 
-bool IsStopped();
+#if HAS_LEVELING
+  bool leveling_is_valid();
+  bool leveling_is_active();
+  void set_bed_leveling_enabled(const bool enable=true);
+  void reset_bed_level();
+#endif
 
-bool enqueuecommand(const char* cmd);
-void enqueuecommands_P(const char* pgcode);
-void prepare_arc_move(char isclockwise);
-void clamp_to_software_endstops(float target[3]);
+#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
+  void set_z_fade_height(const float zfh);
+#endif
 
-#ifdef FAST_PWM_FAN
-void setPwmFrequency(uint8_t pin, int val);
+#if ENABLED(Z_DUAL_ENDSTOPS)
+  extern float z_endstop_adj;
 #endif
 
-#ifndef CRITICAL_SECTION_START
-  #define CRITICAL_SECTION_START  unsigned char _sreg = SREG; cli();
-  #define CRITICAL_SECTION_END    SREG = _sreg;
-#endif //CRITICAL_SECTION_START
+#if HAS_BED_PROBE
+  extern float zprobe_zoffset;
+  void refresh_zprobe_zoffset(const bool no_babystep=false);
+  #define DEPLOY_PROBE() set_probe_deployed(true)
+  #define STOW_PROBE() set_probe_deployed(false)
+#else
+  #define DEPLOY_PROBE()
+  #define STOW_PROBE()
+#endif
 
-extern float homing_feedrate[];
-extern bool axis_relative_modes[];
-extern int feedmultiply;
-extern int extrudemultiply; // Sets extrude multiply factor (in percent)
-extern float volumetric_multiplier[EXTRUDERS]; // reciprocal of cross-sectional area of filament (in square millimeters), stored this way to reduce computational burden in planner
-extern float current_position[NUM_AXIS] ;
-extern float add_homeing[3];
-#ifdef DELTA
-extern float endstop_adj[3];
+#if ENABLED(HOST_KEEPALIVE_FEATURE)
+  extern MarlinBusyState busy_state;
+  #define KEEPALIVE_STATE(n) do{ busy_state = n; }while(0)
+#else
+  #define KEEPALIVE_STATE(n) NOOP
+#endif
+
+#if FAN_COUNT > 0
+  extern int16_t fanSpeeds[FAN_COUNT];
+  #if ENABLED(PROBING_FANS_OFF)
+    extern bool fans_paused;
+    extern int16_t paused_fanSpeeds[FAN_COUNT];
+  #endif
+#endif
+
+#if ENABLED(BARICUDA)
+  extern uint8_t baricuda_valve_pressure, baricuda_e_to_p_pressure;
+#endif
+
+#if ENABLED(FILAMENT_WIDTH_SENSOR)
+  extern bool filament_sensor;         // Flag that filament sensor readings should control extrusion
+  extern float filament_width_nominal, // Theoretical filament diameter i.e., 3.00 or 1.75
+               filament_width_meas;    // Measured filament diameter
+  extern uint8_t meas_delay_cm,        // Delay distance
+                 measurement_delay[];  // Ring buffer to delay measurement
+  extern int8_t filwidth_delay_index[2]; // Ring buffer indexes. Used by planner, temperature, and main code
 #endif
-extern float min_pos[3];
-extern float max_pos[3];
-extern bool axis_known_position[3];
-extern float zprobe_zoffset;
-extern int fanSpeed;
-#ifdef BARICUDA
-extern int ValvePressure;
-extern int EtoPPressure;
+
+#if ENABLED(ADVANCED_PAUSE_FEATURE)
+  extern AdvancedPauseMenuResponse advanced_pause_menu_response;
 #endif
 
-#ifdef FAN_SOFT_PWM
-extern unsigned char fanSpeedSoftPwm;
+#if ENABLED(PID_EXTRUSION_SCALING)
+  extern int lpq_len;
 #endif
 
-#ifdef FWRETRACT
-extern bool autoretract_enabled;
-extern bool retracted;
-extern float retract_length, retract_feedrate, retract_zlift;
-extern float retract_recover_length, retract_recover_feedrate;
+#if ENABLED(FWRETRACT)
+  extern bool autoretract_enabled;                 // M209 S - Autoretract switch
+  extern float retract_length,                     // M207 S - G10 Retract length
+               retract_feedrate_mm_s,              // M207 F - G10 Retract feedrate
+               retract_zlift,                      // M207 Z - G10 Retract hop size
+               retract_recover_length,             // M208 S - G11 Recover length
+               retract_recover_feedrate_mm_s,      // M208 F - G11 Recover feedrate
+               swap_retract_length,                // M207 W - G10 Swap Retract length
+               swap_retract_recover_length,        // M208 W - G11 Swap Recover length
+               swap_retract_recover_feedrate_mm_s; // M208 R - G11 Swap Recover feedrate
 #endif
 
-extern unsigned long starttime;
-extern unsigned long stoptime;
+// Print job timer
+#if ENABLED(PRINTCOUNTER)
+  extern PrintCounter print_job_timer;
+#else
+  extern Stopwatch print_job_timer;
+#endif
 
 // Handling multiple extruders pins
 extern uint8_t active_extruder;
 
-#if defined(SDSUPPORT) && defined(POWEROFF_SAVE_SD_FILE)
-void init_power_off_info();
+#if HAS_TEMP_HOTEND || HAS_TEMP_BED
+  void print_heaterstates();
 #endif
 
-#ifdef DIGIPOT_I2C
-extern void digipot_i2c_set_current( int channel, float current );
-extern void digipot_i2c_init();
+#if ENABLED(MIXING_EXTRUDER)
+  extern float mixing_factor[MIXING_STEPPERS];
 #endif
 
+void calculate_volumetric_multipliers();
+
+#if ENABLED(SDSUPPORT) && ENABLED(POWEROFF_SAVE_SD_FILE)
+  void init_power_off_info();
+#endif
+
+/**
+ * Blocking movement and shorthand functions
+ */
+void do_blocking_move_to(const float &x, const float &y, const float &z, const float &fr_mm_s=0.0);
+void do_blocking_move_to_x(const float &x, const float &fr_mm_s=0.0);
+void do_blocking_move_to_z(const float &z, const float &fr_mm_s=0.0);
+void do_blocking_move_to_xy(const float &x, const float &y, const float &fr_mm_s=0.0);
+
+#define HAS_AXIS_UNHOMED_ERR (                                                     \
+         ENABLED(Z_PROBE_ALLEN_KEY)                                                \
+      || ENABLED(Z_PROBE_SLED)                                                     \
+      || HAS_PROBING_PROCEDURE                                                     \
+      || HOTENDS > 1                                                               \
+      || ENABLED(NOZZLE_CLEAN_FEATURE)                                             \
+      || ENABLED(NOZZLE_PARK_FEATURE)                                              \
+      || (ENABLED(ADVANCED_PAUSE_FEATURE) && ENABLED(HOME_BEFORE_FILAMENT_CHANGE)) \
+    ) || ENABLED(NO_MOTION_BEFORE_HOMING)
+
+#if HAS_AXIS_UNHOMED_ERR
+  bool axis_unhomed_error(const bool x=true, const bool y=true, const bool z=true);
 #endif
+
+/**
+ * position_is_reachable family of functions
+ */
+
+#if IS_KINEMATIC // (DELTA or SCARA)
+
+  #if IS_SCARA
+    extern const float L1, L2;
+  #endif
+
+  inline bool position_is_reachable_raw_xy(const float &rx, const float &ry) {
+    #if ENABLED(DELTA)
+      return HYPOT2(rx, ry) <= sq(DELTA_PRINTABLE_RADIUS);
+    #elif IS_SCARA
+      #if MIDDLE_DEAD_ZONE_R > 0
+        const float R2 = HYPOT2(rx - SCARA_OFFSET_X, ry - SCARA_OFFSET_Y);
+        return R2 >= sq(float(MIDDLE_DEAD_ZONE_R)) && R2 <= sq(L1 + L2);
+      #else
+        return HYPOT2(rx - SCARA_OFFSET_X, ry - SCARA_OFFSET_Y) <= sq(L1 + L2);
+      #endif
+    #else // CARTESIAN
+      // To be migrated from MakerArm branch in future
+    #endif
+  }
+
+  inline bool position_is_reachable_by_probe_raw_xy(const float &rx, const float &ry) {
+
+    // Both the nozzle and the probe must be able to reach the point.
+    // This won't work on SCARA since the probe offset rotates with the arm.
+
+    return position_is_reachable_raw_xy(rx, ry)
+        && position_is_reachable_raw_xy(rx - X_PROBE_OFFSET_FROM_EXTRUDER, ry - Y_PROBE_OFFSET_FROM_EXTRUDER);
+  }
+
+#else // CARTESIAN
+
+  inline bool position_is_reachable_raw_xy(const float &rx, const float &ry) {
+      // Add 0.001 margin to deal with float imprecision
+      return WITHIN(rx, X_MIN_POS - 0.001, X_MAX_POS + 0.001)
+          && WITHIN(ry, Y_MIN_POS - 0.001, Y_MAX_POS + 0.001);
+  }
+
+  inline bool position_is_reachable_by_probe_raw_xy(const float &rx, const float &ry) {
+      // Add 0.001 margin to deal with float imprecision
+      return WITHIN(rx, MIN_PROBE_X - 0.001, MAX_PROBE_X + 0.001)
+          && WITHIN(ry, MIN_PROBE_Y - 0.001, MAX_PROBE_Y + 0.001);
+  }
+
+#endif // CARTESIAN
+
+FORCE_INLINE bool position_is_reachable_by_probe_xy(const float &lx, const float &ly) {
+  return position_is_reachable_by_probe_raw_xy(RAW_X_POSITION(lx), RAW_Y_POSITION(ly));
+}
+
+FORCE_INLINE bool position_is_reachable_xy(const float &lx, const float &ly) {
+  return position_is_reachable_raw_xy(RAW_X_POSITION(lx), RAW_Y_POSITION(ly));
+}
+
+#endif // MARLIN_H

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/Marlin.ino

@@ -1,56 +1,72 @@
-/* -*- c++ -*- */
-
-/*
-    Reprap firmware based on Sprinter and grbl.
- Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program.  If not, see <http://www.gnu.org/licenses/>.
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
  */
 
-/*
- This firmware is a mashup between Sprinter and grbl.
-  (https://github.com/kliment/Sprinter)
-  (https://github.com/simen/grbl/tree)
-
- It has preliminary support for Matthew Roberts advance algorithm
-    http://reprap.org/pipermail/reprap-dev/2011-May/003323.html
+/**
+ * About Marlin
+ *
+ * This firmware is a mashup between Sprinter and grbl.
+ *  - https://github.com/kliment/Sprinter
+ *  - https://github.com/simen/grbl/tree
  */
 
-/* All the implementation is done in *.cpp files to get better compatibility with avr-gcc without the Arduino IDE */
-/* Use this file to help the Arduino IDE find which Arduino libraries are needed and to keep documentation on GCode */
-
-#include "Configuration.h"
-#include "pins.h"
+#include "MarlinConfig.h"
 
-#ifdef ULTRA_LCD
-  #if defined(LCD_I2C_TYPE_PCF8575)
+#if ENABLED(ULTRA_LCD)
+  #if ENABLED(LCD_I2C_TYPE_PCF8575)
     #include <Wire.h>
     #include <LiquidCrystal_I2C.h>
-  #elif defined(LCD_I2C_TYPE_MCP23017) || defined(LCD_I2C_TYPE_MCP23008)
+  #elif ENABLED(LCD_I2C_TYPE_MCP23017) || ENABLED(LCD_I2C_TYPE_MCP23008)
     #include <Wire.h>
     #include <LiquidTWI2.h>
-  #elif defined(DOGLCD)
-    #include <U8glib.h> // library for graphics LCD by Oli Kraus (https://code.google.com/p/u8glib/)
+  #elif ENABLED(LCM1602)
+    #include <Wire.h>
+    #include <LCD.h>
+    #include <LiquidCrystal_I2C.h>
+  #elif ENABLED(DOGLCD)
+    #include <U8glib.h> // library for graphics LCD by Oli Kraus (https://github.com/olikraus/U8glib_Arduino)
   #else
     #include <LiquidCrystal.h> // library for character LCD
   #endif
 #endif
 
-#if defined(DIGIPOTSS_PIN) && DIGIPOTSS_PIN > -1
-#include <SPI.h>
+#if HAS_DIGIPOTSS
+  #include <SPI.h>
 #endif
 
-#if defined(DIGIPOT_I2C)
+#if ENABLED(DIGIPOT_I2C)
   #include <Wire.h>
 #endif
+
+#if ENABLED(HAVE_TMCDRIVER)
+  #include <SPI.h>
+  #include <TMC26XStepper.h>
+#endif
+
+#if ENABLED(HAVE_TMC2130)
+  #include <SPI.h>
+  #include <TMC2130Stepper.h>
+#endif
+
+#if ENABLED(HAVE_L6470DRIVER)
+  #include <SPI.h>
+  #include <L6470.h>
+#endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/MarlinConfig.h

@@ -0,0 +1,41 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef MARLIN_CONFIG_H
+#define MARLIN_CONFIG_H
+
+#include "fastio.h"
+#include "macros.h"
+#include "boards.h"
+#include "Version.h"
+#include "Configuration.h"
+#include "Conditionals_LCD.h"
+#include "Configuration_adv.h"
+#include "pins.h"
+#ifndef USBCON
+  #define HardwareSerial_h // trick to disable the standard HWserial
+#endif
+#include "Arduino.h"
+#include "Conditionals_post.h"
+#include "SanityCheck.h"
+
+#endif // MARLIN_CONFIG_H

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/MarlinSerial.cpp

@@ -1,328 +1,654 @@
-/*
-  HardwareSerial.cpp - Hardware serial library for Wiring
-  Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-  
-  Modified 23 November 2006 by David A. Mellis
-  Modified 28 September 2010 by Mark Sproul
-*/
-
-#include "Marlin.h"
-#include "MarlinSerial.h"
-
-#ifndef AT90USB
-// this next line disables the entire HardwareSerial.cpp, 
-// this is so I can support Attiny series and any other chip without a uart
-#if defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H)
-
-#if UART_PRESENT(SERIAL_PORT)
-  ring_buffer rx_buffer  =  { { 0 }, 0, 0 };
-#endif
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * MarlinSerial.cpp - Hardware serial library for Wiring
+ * Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
+ *
+ * Modified 23 November 2006 by David A. Mellis
+ * Modified 28 September 2010 by Mark Sproul
+ * Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
+ * Modified 01 October 2017 by Eduardo José Tagle (added XON/XOFF)
+ */
+
+// Disable HardwareSerial.cpp to support chips without a UART (Attiny, etc.)
+
+#include "MarlinConfig.h"
+
+#if !defined(USBCON) && (defined(UBRRH) || defined(UBRR0H) || defined(UBRR1H) || defined(UBRR2H) || defined(UBRR3H))
+
+  #include "MarlinSerial.h"
+  #include "Marlin.h"
+
+  struct ring_buffer_r {
+    unsigned char buffer[RX_BUFFER_SIZE];
+    volatile ring_buffer_pos_t head, tail;
+  };
+
+  #if TX_BUFFER_SIZE > 0
+    struct ring_buffer_t {
+      unsigned char buffer[TX_BUFFER_SIZE];
+      volatile uint8_t head, tail;
+    };
+  #endif
+
+  #if UART_PRESENT(SERIAL_PORT)
+    ring_buffer_r rx_buffer = { { 0 }, 0, 0 };
+    #if TX_BUFFER_SIZE > 0
+      ring_buffer_t tx_buffer = { { 0 }, 0, 0 };
+      static bool _written;
+    #endif
+  #endif
+
+  #if ENABLED(SERIAL_XON_XOFF)
+    constexpr uint8_t XON_XOFF_CHAR_SENT = 0x80;  // XON / XOFF Character was sent
+    constexpr uint8_t XON_XOFF_CHAR_MASK = 0x1F;  // XON / XOFF character to send
+    // XON / XOFF character definitions
+    constexpr uint8_t XON_CHAR  = 17;
+    constexpr uint8_t XOFF_CHAR = 19;
+    uint8_t xon_xoff_state = XON_XOFF_CHAR_SENT | XON_CHAR;
+  #endif
+
+  #if ENABLED(SERIAL_STATS_DROPPED_RX)
+    uint8_t rx_dropped_bytes = 0;
+  #endif
+
+  #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
+    ring_buffer_pos_t rx_max_enqueued = 0;
+  #endif
+
+  #if ENABLED(EMERGENCY_PARSER)
+
+    #include "stepper.h"
+    #include "language.h"
+
+    // Currently looking for: M108, M112, M410
+    // If you alter the parser please don't forget to update the capabilities in Conditionals_post.h
+
+    FORCE_INLINE void emergency_parser(const unsigned char c) {
+
+      static e_parser_state state = state_RESET;
+
+      switch (state) {
+        case state_RESET:
+          switch (c) {
+            case ' ': break;
+            case 'N': state = state_N;      break;
+            case 'M': state = state_M;      break;
+            default: state = state_IGNORE;
+          }
+          break;
+
+        case state_N:
+          switch (c) {
+            case '0': case '1': case '2':
+            case '3': case '4': case '5':
+            case '6': case '7': case '8':
+            case '9': case '-': case ' ':   break;
+            case 'M': state = state_M;      break;
+            default:  state = state_IGNORE;
+          }
+          break;
+
+        case state_M:
+          switch (c) {
+            case ' ': break;
+            case '1': state = state_M1;     break;
+            case '4': state = state_M4;     break;
+            default: state = state_IGNORE;
+          }
+          break;
+
+        case state_M1:
+          switch (c) {
+            case '0': state = state_M10;    break;
+            case '1': state = state_M11;    break;
+            default: state = state_IGNORE;
+          }
+          break;
+
+        case state_M10:
+          state = (c == '8') ? state_M108 : state_IGNORE;
+          break;
+
+        case state_M11:
+          state = (c == '2') ? state_M112 : state_IGNORE;
+          break;
+
+        case state_M4:
+          state = (c == '1') ? state_M41 : state_IGNORE;
+          break;
+
+        case state_M41:
+          state = (c == '0') ? state_M410 : state_IGNORE;
+          break;
+
+        case state_IGNORE:
+          if (c == '\n') state = state_RESET;
+          break;
+
+        default:
+          if (c == '\n') {
+            switch (state) {
+              case state_M108:
+                wait_for_user = wait_for_heatup = false;
+                break;
+              case state_M112:
+                kill(PSTR(MSG_KILLED));
+                break;
+              case state_M410:
+                quickstop_stepper();
+                break;
+              default:
+                break;
+            }
+            state = state_RESET;
+          }
+      }
+    }
 
-FORCE_INLINE void store_char(unsigned char c)
-{
-  int i = (unsigned int)(rx_buffer.head + 1) % RX_BUFFER_SIZE;
-
-  // if we should be storing the received character into the location
-  // just before the tail (meaning that the head would advance to the
-  // current location of the tail), we're about to overflow the buffer
-  // and so we don't write the character or advance the head.
-  if (i != rx_buffer.tail) {
-    rx_buffer.buffer[rx_buffer.head] = c;
-    rx_buffer.head = i;
-  }
-}
+  #endif // EMERGENCY_PARSER
+
+  FORCE_INLINE void store_rxd_char() {
+    const ring_buffer_pos_t h = rx_buffer.head,
+                            i = (ring_buffer_pos_t)(h + 1) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
 
+    // If the character is to be stored at the index just before the tail
+    // (such that the head would advance to the current tail), the buffer is
+    // critical, so don't write the character or advance the head.
+    const char c = M_UDRx;
+    if (i != rx_buffer.tail) {
+      rx_buffer.buffer[h] = c;
+      rx_buffer.head = i;
+    }
+    else {
+      #if ENABLED(SERIAL_STATS_DROPPED_RX)
+        if (!++rx_dropped_bytes) ++rx_dropped_bytes;
+      #endif
+    }
 
-//#elif defined(SIG_USART_RECV)
-#if defined(M_USARTx_RX_vect)
-  // fixed by Mark Sproul this is on the 644/644p
-  //SIGNAL(SIG_USART_RECV)
-  SIGNAL(M_USARTx_RX_vect)
-  {
-    unsigned char c  =  M_UDRx;
-    store_char(c);
+    #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
+      // calculate count of bytes stored into the RX buffer
+      ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
+      // Keep track of the maximum count of enqueued bytes
+      NOLESS(rx_max_enqueued, rx_count);
+    #endif
+
+    #if ENABLED(SERIAL_XON_XOFF)
+
+      // for high speed transfers, we can use XON/XOFF protocol to do
+      // software handshake and avoid overruns.
+      if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XON_CHAR) {
+
+        // calculate count of bytes stored into the RX buffer
+        ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
+
+        // if we are above 12.5% of RX buffer capacity, send XOFF before
+        // we run out of RX buffer space .. We need 325 bytes @ 250kbits/s to
+        // let the host react and stop sending bytes. This translates to 13mS
+        // propagation time.
+        if (rx_count >= (RX_BUFFER_SIZE) / 8) {
+          // If TX interrupts are disabled and data register is empty,
+          // just write the byte to the data register and be done. This
+          // shortcut helps significantly improve the effective datarate
+          // at high (>500kbit/s) bitrates, where interrupt overhead
+          // becomes a slowdown.
+          if (!TEST(M_UCSRxB, M_UDRIEx) && TEST(M_UCSRxA, M_UDREx)) {
+            // Send an XOFF character
+            M_UDRx = XOFF_CHAR;
+            // clear the TXC bit -- "can be cleared by writing a one to its bit
+            // location". This makes sure flush() won't return until the bytes
+            // actually got written
+            SBI(M_UCSRxA, M_TXCx);
+            // And remember it was sent
+            xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT;
+          }
+          else {
+            // TX interrupts disabled, but buffer still not empty ... or
+            // TX interrupts enabled. Reenable TX ints and schedule XOFF
+            // character to be sent
+            #if TX_BUFFER_SIZE > 0
+              SBI(M_UCSRxB, M_UDRIEx);
+              xon_xoff_state = XOFF_CHAR;
+            #else
+              // We are not using TX interrupts, we will have to send this manually
+              while (!TEST(M_UCSRxA, M_UDREx)) {/* nada */}
+              M_UDRx = XOFF_CHAR;
+              // And remember we already sent it
+              xon_xoff_state = XOFF_CHAR | XON_XOFF_CHAR_SENT;
+            #endif
+          }
+        }
+      }
+    #endif // SERIAL_XON_XOFF
+
+    #if ENABLED(EMERGENCY_PARSER)
+      emergency_parser(c);
+    #endif
   }
-#endif
 
-// Constructors ////////////////////////////////////////////////////////////////
+  #if TX_BUFFER_SIZE > 0
+
+    FORCE_INLINE void _tx_udr_empty_irq(void) {
+      // If interrupts are enabled, there must be more data in the output
+      // buffer.
+
+      #if ENABLED(SERIAL_XON_XOFF)
+        // Do a priority insertion of an XON/XOFF char, if needed.
+        const uint8_t state = xon_xoff_state;
+        if (!(state & XON_XOFF_CHAR_SENT)) {
+          M_UDRx = state & XON_XOFF_CHAR_MASK;
+          xon_xoff_state = state | XON_XOFF_CHAR_SENT;
+        }
+        else
+      #endif
+      { // Send the next byte
+        const uint8_t t = tx_buffer.tail, c = tx_buffer.buffer[t];
+        tx_buffer.tail = (t + 1) & (TX_BUFFER_SIZE - 1);
+        M_UDRx = c;
+      }
+
+      // clear the TXC bit -- "can be cleared by writing a one to its bit
+      // location". This makes sure flush() won't return until the bytes
+      // actually got written
+      SBI(M_UCSRxA, M_TXCx);
+
+      // Disable interrupts if the buffer is empty
+      if (tx_buffer.head == tx_buffer.tail)
+        CBI(M_UCSRxB, M_UDRIEx);
+    }
 
-MarlinSerial::MarlinSerial()
-{
+    #ifdef M_USARTx_UDRE_vect
+      ISR(M_USARTx_UDRE_vect) { _tx_udr_empty_irq(); }
+    #endif
 
-}
+  #endif // TX_BUFFER_SIZE
 
-// Public Methods //////////////////////////////////////////////////////////////
+  #ifdef M_USARTx_RX_vect
+    ISR(M_USARTx_RX_vect) { store_rxd_char(); }
+  #endif
 
-void MarlinSerial::begin(long baud)
-{
-  uint16_t baud_setting;
-  bool useU2X = true;
+  // Public Methods
 
-#if F_CPU == 16000000UL && SERIAL_PORT == 0
-  // hardcoded exception for compatibility with the bootloader shipped
-  // with the Duemilanove and previous boards and the firmware on the 8U2
-  // on the Uno and Mega 2560.
-  if (baud == 57600) {
-    useU2X = false;
-  }
-#endif
-  
-  if (useU2X) {
-    M_UCSRxA = 1 << M_U2Xx;
-    baud_setting = (F_CPU / 4 / baud - 1) / 2;
-  } else {
-    M_UCSRxA = 0;
-    baud_setting = (F_CPU / 8 / baud - 1) / 2;
-  }
+  void MarlinSerial::begin(const long baud) {
+    uint16_t baud_setting;
+    bool useU2X = true;
 
-  // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
-  M_UBRRxH = baud_setting >> 8;
-  M_UBRRxL = baud_setting;
+    #if F_CPU == 16000000UL && SERIAL_PORT == 0
+      // Hard-coded exception for compatibility with the bootloader shipped
+      // with the Duemilanove and previous boards, and the firmware on the
+      // 8U2 on the Uno and Mega 2560.
+      if (baud == 57600) useU2X = false;
+    #endif
 
-  sbi(M_UCSRxB, M_RXENx);
-  sbi(M_UCSRxB, M_TXENx);
-  sbi(M_UCSRxB, M_RXCIEx);
-}
+    if (useU2X) {
+      M_UCSRxA = _BV(M_U2Xx);
+      baud_setting = (F_CPU / 4 / baud - 1) / 2;
+    }
+    else {
+      M_UCSRxA = 0;
+      baud_setting = (F_CPU / 8 / baud - 1) / 2;
+    }
 
-void MarlinSerial::end()
-{
-  cbi(M_UCSRxB, M_RXENx);
-  cbi(M_UCSRxB, M_TXENx);
-  cbi(M_UCSRxB, M_RXCIEx);  
-}
+    // assign the baud_setting, a.k.a. ubbr (USART Baud Rate Register)
+    M_UBRRxH = baud_setting >> 8;
+    M_UBRRxL = baud_setting;
+
+    SBI(M_UCSRxB, M_RXENx);
+    SBI(M_UCSRxB, M_TXENx);
+    SBI(M_UCSRxB, M_RXCIEx);
+    #if TX_BUFFER_SIZE > 0
+      CBI(M_UCSRxB, M_UDRIEx);
+      _written = false;
+    #endif
+  }
 
+  void MarlinSerial::end() {
+    CBI(M_UCSRxB, M_RXENx);
+    CBI(M_UCSRxB, M_TXENx);
+    CBI(M_UCSRxB, M_RXCIEx);
+    CBI(M_UCSRxB, M_UDRIEx);
+  }
 
+  void MarlinSerial::checkRx(void) {
+    if (TEST(M_UCSRxA, M_RXCx)) {
+      CRITICAL_SECTION_START;
+        store_rxd_char();
+      CRITICAL_SECTION_END;
+    }
+  }
 
-int MarlinSerial::peek(void)
-{
-  if (rx_buffer.head == rx_buffer.tail) {
-    return -1;
-  } else {
-    return rx_buffer.buffer[rx_buffer.tail];
+  int MarlinSerial::peek(void) {
+    CRITICAL_SECTION_START;
+      const int v = rx_buffer.head == rx_buffer.tail ? -1 : rx_buffer.buffer[rx_buffer.tail];
+    CRITICAL_SECTION_END;
+    return v;
   }
-}
-
-int MarlinSerial::read(void)
-{
-  // if the head isn't ahead of the tail, we don't have any characters
-  if (rx_buffer.head == rx_buffer.tail) {
-    return -1;
-  } else {
-    unsigned char c = rx_buffer.buffer[rx_buffer.tail];
-    rx_buffer.tail = (unsigned int)(rx_buffer.tail + 1) % RX_BUFFER_SIZE;
-    return c;
+
+  int MarlinSerial::read(void) {
+    int v;
+    CRITICAL_SECTION_START;
+      const ring_buffer_pos_t t = rx_buffer.tail;
+      if (rx_buffer.head == t)
+        v = -1;
+      else {
+        v = rx_buffer.buffer[t];
+        rx_buffer.tail = (ring_buffer_pos_t)(t + 1) & (RX_BUFFER_SIZE - 1);
+
+        #if ENABLED(SERIAL_XON_XOFF)
+          if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
+            // Get count of bytes in the RX buffer
+            ring_buffer_pos_t rx_count = (ring_buffer_pos_t)(rx_buffer.head - rx_buffer.tail) & (ring_buffer_pos_t)(RX_BUFFER_SIZE - 1);
+            // When below 10% of RX buffer capacity, send XON before
+            // running out of RX buffer bytes
+            if (rx_count < (RX_BUFFER_SIZE) / 10) {
+              xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
+              CRITICAL_SECTION_END;       // End critical section before returning!
+              writeNoHandshake(XON_CHAR);
+              return v;
+            }
+          }
+        #endif
+      }
+    CRITICAL_SECTION_END;
+    return v;
   }
-}
 
-void MarlinSerial::flush()
-{
-  // don't reverse this or there may be problems if the RX interrupt
-  // occurs after reading the value of rx_buffer_head but before writing
-  // the value to rx_buffer_tail; the previous value of rx_buffer_head
-  // may be written to rx_buffer_tail, making it appear as if the buffer
-  // don't reverse this or there may be problems if the RX interrupt
-  // occurs after reading the value of rx_buffer_head but before writing
-  // the value to rx_buffer_tail; the previous value of rx_buffer_head
-  // may be written to rx_buffer_tail, making it appear as if the buffer
-  // were full, not empty.
-  rx_buffer.head = rx_buffer.tail;
-}
+  ring_buffer_pos_t MarlinSerial::available(void) {
+    CRITICAL_SECTION_START;
+      const ring_buffer_pos_t h = rx_buffer.head, t = rx_buffer.tail;
+    CRITICAL_SECTION_END;
+    return (ring_buffer_pos_t)(RX_BUFFER_SIZE + h - t) & (RX_BUFFER_SIZE - 1);
+  }
 
+  void MarlinSerial::flush(void) {
+    // Don't change this order of operations. If the RX interrupt occurs between
+    // reading rx_buffer_head and updating rx_buffer_tail, the previous rx_buffer_head
+    // may be written to rx_buffer_tail, making the buffer appear full rather than empty.
+    CRITICAL_SECTION_START;
+      rx_buffer.head = rx_buffer.tail;
+    CRITICAL_SECTION_END;
+
+    #if ENABLED(SERIAL_XON_XOFF)
+      if ((xon_xoff_state & XON_XOFF_CHAR_MASK) == XOFF_CHAR) {
+        xon_xoff_state = XON_CHAR | XON_XOFF_CHAR_SENT;
+        writeNoHandshake(XON_CHAR);
+      }
+    #endif
+  }
 
+  #if TX_BUFFER_SIZE > 0
+    uint8_t MarlinSerial::availableForWrite(void) {
+      CRITICAL_SECTION_START;
+        const uint8_t h = tx_buffer.head, t = tx_buffer.tail;
+      CRITICAL_SECTION_END;
+      return (uint8_t)(TX_BUFFER_SIZE + h - t) & (TX_BUFFER_SIZE - 1);
+    }
 
+    void MarlinSerial::write(const uint8_t c) {
+      #if ENABLED(SERIAL_XON_XOFF)
+        const uint8_t state = xon_xoff_state;
+        if (!(state & XON_XOFF_CHAR_SENT)) {
+          // Send 2 chars: XON/XOFF, then a user-specified char
+          writeNoHandshake(state & XON_XOFF_CHAR_MASK);
+          xon_xoff_state = state | XON_XOFF_CHAR_SENT;
+        }
+      #endif
+      writeNoHandshake(c);
+    }
 
-/// imports from print.h
+    void MarlinSerial::writeNoHandshake(const uint8_t c) {
+      _written = true;
+      CRITICAL_SECTION_START;
+        bool emty = (tx_buffer.head == tx_buffer.tail);
+      CRITICAL_SECTION_END;
+
+      // If the buffer and the data register is empty, just write the byte
+      // to the data register and be done. This shortcut helps
+      // significantly improve the effective datarate at high (>
+      // 500kbit/s) bitrates, where interrupt overhead becomes a slowdown.
+      if (emty && TEST(M_UCSRxA, M_UDREx)) {
+        CRITICAL_SECTION_START;
+          M_UDRx = c;
+          SBI(M_UCSRxA, M_TXCx);
+        CRITICAL_SECTION_END;
+        return;
+      }
+      const uint8_t i = (tx_buffer.head + 1) & (TX_BUFFER_SIZE - 1);
+
+      // If the output buffer is full, there's nothing for it other than to
+      // wait for the interrupt handler to empty it a bit
+      while (i == tx_buffer.tail) {
+        if (!TEST(SREG, SREG_I)) {
+          // Interrupts are disabled, so we'll have to poll the data
+          // register empty flag ourselves. If it is set, pretend an
+          // interrupt has happened and call the handler to free up
+          // space for us.
+          if (TEST(M_UCSRxA, M_UDREx))
+            _tx_udr_empty_irq();
+        }
+        else {
+          // nop, the interrupt handler will free up space for us
+        }
+      }
+
+      tx_buffer.buffer[tx_buffer.head] = c;
+      { CRITICAL_SECTION_START;
+          tx_buffer.head = i;
+          SBI(M_UCSRxB, M_UDRIEx);
+        CRITICAL_SECTION_END;
+      }
+      return;
+    }
 
+    void MarlinSerial::flushTX(void) {
+      // TX
+      // If we have never written a byte, no need to flush. This special
+      // case is needed since there is no way to force the TXC (transmit
+      // complete) bit to 1 during initialization
+      if (!_written)
+        return;
+
+      while (TEST(M_UCSRxB, M_UDRIEx) || !TEST(M_UCSRxA, M_TXCx)) {
+        if (!TEST(SREG, SREG_I) && TEST(M_UCSRxB, M_UDRIEx))
+          // Interrupts are globally disabled, but the DR empty
+          // interrupt should be enabled, so poll the DR empty flag to
+          // prevent deadlock
+          if (TEST(M_UCSRxA, M_UDREx))
+            _tx_udr_empty_irq();
+      }
+      // If we get here, nothing is queued anymore (DRIE is disabled) and
+      // the hardware finished tranmission (TXC is set).
+    }
 
+  #else // TX_BUFFER_SIZE == 0
+
+    void MarlinSerial::write(const uint8_t c) {
+      #if ENABLED(SERIAL_XON_XOFF)
+        // Do a priority insertion of an XON/XOFF char, if needed.
+        const uint8_t state = xon_xoff_state;
+        if (!(state & XON_XOFF_CHAR_SENT)) {
+          writeNoHandshake(state & XON_XOFF_CHAR_MASK);
+          xon_xoff_state = state | XON_XOFF_CHAR_SENT;
+        }
+      #endif
+      writeNoHandshake(c);
+    }
 
+    void MarlinSerial::writeNoHandshake(uint8_t c) {
+      while (!TEST(M_UCSRxA, M_UDREx)) {/* nada */}
+      M_UDRx = c;
+    }
 
-void MarlinSerial::print(char c, int base)
-{
-  print((long) c, base);
-}
+  #endif // TX_BUFFER_SIZE == 0
 
-void MarlinSerial::print(unsigned char b, int base)
-{
-  print((unsigned long) b, base);
-}
+  /**
+   * Imports from print.h
+   */
 
-void MarlinSerial::print(int n, int base)
-{
-  print((long) n, base);
-}
+  void MarlinSerial::print(char c, int base) {
+    print((long)c, base);
+  }
 
-void MarlinSerial::print(unsigned int n, int base)
-{
-  print((unsigned long) n, base);
-}
+  void MarlinSerial::print(unsigned char b, int base) {
+    print((unsigned long)b, base);
+  }
 
-void MarlinSerial::print(long n, int base)
-{
-  if (base == 0) {
-    write(n);
-  } else if (base == 10) {
-    if (n < 0) {
-      print('-');
-      n = -n;
+  void MarlinSerial::print(int n, int base) {
+    print((long)n, base);
+  }
+
+  void MarlinSerial::print(unsigned int n, int base) {
+    print((unsigned long)n, base);
+  }
+
+  void MarlinSerial::print(long n, int base) {
+    if (base == 0)
+      write(n);
+    else if (base == 10) {
+      if (n < 0) {
+        print('-');
+        n = -n;
+      }
+      printNumber(n, 10);
     }
-    printNumber(n, 10);
-  } else {
-    printNumber(n, base);
+    else
+      printNumber(n, base);
   }
-}
-
-void MarlinSerial::print(unsigned long n, int base)
-{
-  if (base == 0) write(n);
-  else printNumber(n, base);
-}
-
-void MarlinSerial::print(double n, int digits)
-{
-  printFloat(n, digits);
-}
-
-void MarlinSerial::println(void)
-{
-  print('\r');
-  print('\n');  
-}
-
-void MarlinSerial::println(const String &s)
-{
-  print(s);
-  println();
-}
-
-void MarlinSerial::println(const char c[])
-{
-  print(c);
-  println();
-}
-
-void MarlinSerial::println(char c, int base)
-{
-  print(c, base);
-  println();
-}
-
-void MarlinSerial::println(unsigned char b, int base)
-{
-  print(b, base);
-  println();
-}
-
-void MarlinSerial::println(int n, int base)
-{
-  print(n, base);
-  println();
-}
-
-void MarlinSerial::println(unsigned int n, int base)
-{
-  print(n, base);
-  println();
-}
-
-void MarlinSerial::println(long n, int base)
-{
-  print(n, base);
-  println();
-}
-
-void MarlinSerial::println(unsigned long n, int base)
-{
-  print(n, base);
-  println();
-}
-
-void MarlinSerial::println(double n, int digits)
-{
-  print(n, digits);
-  println();
-}
-
-// Private Methods /////////////////////////////////////////////////////////////
-
-void MarlinSerial::printNumber(unsigned long n, uint8_t base)
-{
-  unsigned char buf[8 * sizeof(long)]; // Assumes 8-bit chars. 
-  unsigned long i = 0;
-
-  if (n == 0) {
-    print('0');
-    return;
-  } 
-
-  while (n > 0) {
-    buf[i++] = n % base;
-    n /= base;
+
+  void MarlinSerial::print(unsigned long n, int base) {
+    if (base == 0) write(n);
+    else printNumber(n, base);
   }
 
-  for (; i > 0; i--)
-    print((char) (buf[i - 1] < 10 ?
-      '0' + buf[i - 1] :
-      'A' + buf[i - 1] - 10));
-}
-
-void MarlinSerial::printFloat(double number, uint8_t digits) 
-{ 
-  // Handle negative numbers
-  if (number < 0.0)
-  {
-     print('-');
-     number = -number;
+  void MarlinSerial::print(double n, int digits) {
+    printFloat(n, digits);
   }
 
-  // Round correctly so that print(1.999, 2) prints as "2.00"
-  double rounding = 0.5;
-  for (uint8_t i=0; i<digits; ++i)
-    rounding /= 10.0;
-  
-  number += rounding;
+  void MarlinSerial::println(void) {
+    print('\r');
+    print('\n');
+  }
 
-  // Extract the integer part of the number and print it
-  unsigned long int_part = (unsigned long)number;
-  double remainder = number - (double)int_part;
-  print(int_part);
+  void MarlinSerial::println(const String& s) {
+    print(s);
+    println();
+  }
 
-  // Print the decimal point, but only if there are digits beyond
-  if (digits > 0)
-    print("."); 
+  void MarlinSerial::println(const char c[]) {
+    print(c);
+    println();
+  }
 
-  // Extract digits from the remainder one at a time
-  while (digits-- > 0)
-  {
-    remainder *= 10.0;
-    int toPrint = int(remainder);
-    print(toPrint);
-    remainder -= toPrint; 
-  } 
-}
-// Preinstantiate Objects //////////////////////////////////////////////////////
+  void MarlinSerial::println(char c, int base) {
+    print(c, base);
+    println();
+  }
 
+  void MarlinSerial::println(unsigned char b, int base) {
+    print(b, base);
+    println();
+  }
+
+  void MarlinSerial::println(int n, int base) {
+    print(n, base);
+    println();
+  }
 
-MarlinSerial MSerial;
+  void MarlinSerial::println(unsigned int n, int base) {
+    print(n, base);
+    println();
+  }
 
-#endif // whole file
-#endif // !AT90USB
+  void MarlinSerial::println(long n, int base) {
+    print(n, base);
+    println();
+  }
+
+  void MarlinSerial::println(unsigned long n, int base) {
+    print(n, base);
+    println();
+  }
+
+  void MarlinSerial::println(double n, int digits) {
+    print(n, digits);
+    println();
+  }
+
+  // Private Methods
+
+  void MarlinSerial::printNumber(unsigned long n, uint8_t base) {
+    if (n) {
+      unsigned char buf[8 * sizeof(long)]; // Enough space for base 2
+      int8_t i = 0;
+      while (n) {
+        buf[i++] = n % base;
+        n /= base;
+      }
+      while (i--)
+        print((char)(buf[i] + (buf[i] < 10 ? '0' : 'A' - 10)));
+    }
+    else
+      print('0');
+  }
+
+  void MarlinSerial::printFloat(double number, uint8_t digits) {
+    // Handle negative numbers
+    if (number < 0.0) {
+      print('-');
+      number = -number;
+    }
+
+    // Round correctly so that print(1.999, 2) prints as "2.00"
+    double rounding = 0.5;
+    for (uint8_t i = 0; i < digits; ++i)
+      rounding *= 0.1;
+
+    number += rounding;
+
+    // Extract the integer part of the number and print it
+    unsigned long int_part = (unsigned long)number;
+    double remainder = number - (double)int_part;
+    print(int_part);
+
+    // Print the decimal point, but only if there are digits beyond
+    if (digits) {
+      print('.');
+      // Extract digits from the remainder one at a time
+      while (digits--) {
+        remainder *= 10.0;
+        int toPrint = int(remainder);
+        print(toPrint);
+        remainder -= toPrint;
+      }
+    }
+  }
+
+  // Preinstantiate
+  MarlinSerial customizedSerial;
+
+#endif // !USBCON && (UBRRH || UBRR0H || UBRR1H || UBRR2H || UBRR3H)
 
 // For AT90USB targets use the UART for BT interfacing
-#if defined(AT90USB) && defined (BTENABLED)
-   HardwareSerial bt;
+#if defined(USBCON) && ENABLED(BLUETOOTH)
+  HardwareSerial bluetoothSerial;
 #endif
-

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/MarlinSerial.h

@@ -1,62 +1,73 @@
-/*
-  HardwareSerial.h - Hardware serial library for Wiring
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+  MarlinSerial.h - Hardware serial library for Wiring
   Copyright (c) 2006 Nicholas Zambetti.  All right reserved.
 
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-
   Modified 28 September 2010 by Mark Sproul
+  Modified 14 February 2016 by Andreas Hardtung (added tx buffer)
+
 */
 
-#ifndef MarlinSerial_h
-#define MarlinSerial_h
-#include "Marlin.h"
+#ifndef MARLINSERIAL_H
+#define MARLINSERIAL_H
 
-#if !defined(SERIAL_PORT) 
-#define SERIAL_PORT 0
+#include "MarlinConfig.h"
+
+#ifndef SERIAL_PORT
+  #define SERIAL_PORT 0
 #endif
 
 // The presence of the UBRRH register is used to detect a UART.
 #define UART_PRESENT(port) ((port == 0 && (defined(UBRRH) || defined(UBRR0H))) || \
-						(port == 1 && defined(UBRR1H)) || (port == 2 && defined(UBRR2H)) || \
-						(port == 3 && defined(UBRR3H)))				
-						
+                            (port == 1 && defined(UBRR1H)) || (port == 2 && defined(UBRR2H)) || \
+                            (port == 3 && defined(UBRR3H)))
+
 // These are macros to build serial port register names for the selected SERIAL_PORT (C preprocessor
 // requires two levels of indirection to expand macro values properly)
 #define SERIAL_REGNAME(registerbase,number,suffix) SERIAL_REGNAME_INTERNAL(registerbase,number,suffix)
 #if SERIAL_PORT == 0 && (!defined(UBRR0H) || !defined(UDR0)) // use un-numbered registers if necessary
-#define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
+  #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##suffix
 #else
-#define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
+  #define SERIAL_REGNAME_INTERNAL(registerbase,number,suffix) registerbase##number##suffix
 #endif
 
-// Registers used by MarlinSerial class (these are expanded 
-// depending on selected serial port
-#define M_UCSRxA SERIAL_REGNAME(UCSR,SERIAL_PORT,A) // defines M_UCSRxA to be UCSRnA where n is the serial port number
-#define M_UCSRxB SERIAL_REGNAME(UCSR,SERIAL_PORT,B) 
-#define M_RXENx SERIAL_REGNAME(RXEN,SERIAL_PORT,)    
-#define M_TXENx SERIAL_REGNAME(TXEN,SERIAL_PORT,)    
-#define M_RXCIEx SERIAL_REGNAME(RXCIE,SERIAL_PORT,)    
-#define M_UDREx SERIAL_REGNAME(UDRE,SERIAL_PORT,)    
-#define M_UDRx SERIAL_REGNAME(UDR,SERIAL_PORT,)  
-#define M_UBRRxH SERIAL_REGNAME(UBRR,SERIAL_PORT,H)
-#define M_UBRRxL SERIAL_REGNAME(UBRR,SERIAL_PORT,L)
-#define M_RXCx SERIAL_REGNAME(RXC,SERIAL_PORT,)
-#define M_USARTx_RX_vect SERIAL_REGNAME(USART,SERIAL_PORT,_RX_vect)
-#define M_U2Xx SERIAL_REGNAME(U2X,SERIAL_PORT,)
-
-
+// Registers used by MarlinSerial class (expanded depending on selected serial port)
+#define M_UCSRxA           SERIAL_REGNAME(UCSR,SERIAL_PORT,A) // defines M_UCSRxA to be UCSRnA where n is the serial port number
+#define M_UCSRxB           SERIAL_REGNAME(UCSR,SERIAL_PORT,B)
+#define M_RXENx            SERIAL_REGNAME(RXEN,SERIAL_PORT,)
+#define M_TXENx            SERIAL_REGNAME(TXEN,SERIAL_PORT,)
+#define M_TXCx             SERIAL_REGNAME(TXC,SERIAL_PORT,)
+#define M_RXCIEx           SERIAL_REGNAME(RXCIE,SERIAL_PORT,)
+#define M_UDREx            SERIAL_REGNAME(UDRE,SERIAL_PORT,)
+#define M_UDRIEx           SERIAL_REGNAME(UDRIE,SERIAL_PORT,)
+#define M_UDRx             SERIAL_REGNAME(UDR,SERIAL_PORT,)
+#define M_UBRRxH           SERIAL_REGNAME(UBRR,SERIAL_PORT,H)
+#define M_UBRRxL           SERIAL_REGNAME(UBRR,SERIAL_PORT,L)
+#define M_RXCx             SERIAL_REGNAME(RXC,SERIAL_PORT,)
+#define M_USARTx_RX_vect   SERIAL_REGNAME(USART,SERIAL_PORT,_RX_vect)
+#define M_U2Xx             SERIAL_REGNAME(U2X,SERIAL_PORT,)
+#define M_USARTx_UDRE_vect SERIAL_REGNAME(USART,SERIAL_PORT,_UDRE_vect)
 
 #define DEC 10
 #define HEX 16
@@ -64,126 +75,106 @@
 #define BIN 2
 #define BYTE 0
 
+#ifndef USBCON
+  // Define constants and variables for buffering incoming serial data.  We're
+  // using a ring buffer (I think), in which rx_buffer_head is the index of the
+  // location to which to write the next incoming character and rx_buffer_tail
+  // is the index of the location from which to read.
+  // 256 is the max limit due to uint8_t head and tail. Use only powers of 2. (...,16,32,64,128,256)
+  #ifndef RX_BUFFER_SIZE
+    #define RX_BUFFER_SIZE 128
+  #endif
+  #ifndef TX_BUFFER_SIZE
+    #define TX_BUFFER_SIZE 32
+  #endif
+
+  #if ENABLED(SERIAL_XON_XOFF) && RX_BUFFER_SIZE < 1024
+    #error "XON/XOFF requires RX_BUFFER_SIZE >= 1024 for reliable transfers without drops."
+  #endif
+  #if !IS_POWER_OF_2(RX_BUFFER_SIZE) || RX_BUFFER_SIZE < 2
+    #error "RX_BUFFER_SIZE must be a power of 2 greater than 1."
+  #endif
+  #if TX_BUFFER_SIZE && (TX_BUFFER_SIZE < 2 || TX_BUFFER_SIZE > 256 || !IS_POWER_OF_2(TX_BUFFER_SIZE))
+    #error "TX_BUFFER_SIZE must be 0 or a power of 2 greater than 1."
+  #endif
+
+  #if RX_BUFFER_SIZE > 256
+    typedef uint16_t ring_buffer_pos_t;
+  #else
+    typedef uint8_t ring_buffer_pos_t;
+  #endif
+
+  #if ENABLED(SERIAL_STATS_DROPPED_RX)
+    extern uint8_t rx_dropped_bytes;
+  #endif
+
+  #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
+    extern ring_buffer_pos_t rx_max_enqueued;
+  #endif
+
+  class MarlinSerial { //: public Stream
+
+    public:
+      MarlinSerial() {};
+      static void begin(const long);
+      static void end();
+      static int peek(void);
+      static int read(void);
+      static void flush(void);
+      static ring_buffer_pos_t available(void);
+      static void checkRx(void);
+      static void write(const uint8_t c);
+      #if TX_BUFFER_SIZE > 0
+        static uint8_t availableForWrite(void);
+        static void flushTX(void);
+      #endif
+      static void writeNoHandshake(const uint8_t c);
+
+      #if ENABLED(SERIAL_STATS_DROPPED_RX)
+        FORCE_INLINE static uint32_t dropped() { return rx_dropped_bytes; }
+      #endif
+
+      #if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
+        FORCE_INLINE static ring_buffer_pos_t rxMaxEnqueued() { return rx_max_enqueued; }
+      #endif
 
-#ifndef AT90USB
-// Define constants and variables for buffering incoming serial data.  We're
-// using a ring buffer (I think), in which rx_buffer_head is the index of the
-// location to which to write the next incoming character and rx_buffer_tail
-// is the index of the location from which to read.
-#define RX_BUFFER_SIZE 128
-
-
-struct ring_buffer
-{
-  unsigned char buffer[RX_BUFFER_SIZE];
-  int head;
-  int tail;
-};
-
-#if UART_PRESENT(SERIAL_PORT)
-  extern ring_buffer rx_buffer;
-#endif
-
-class MarlinSerial //: public Stream
-{
-
-  public:
-    MarlinSerial();
-    void begin(long);
-    void end();
-    int peek(void);
-    int read(void);
-    void flush(void);
-    
-    FORCE_INLINE int available(void)
-    {
-      return (unsigned int)(RX_BUFFER_SIZE + rx_buffer.head - rx_buffer.tail) % RX_BUFFER_SIZE;
-    }
-    
-    FORCE_INLINE void write(uint8_t c)
-    {
-      while (!((M_UCSRxA) & (1 << M_UDREx)))
-        ;
-
-      M_UDRx = c;
-    }
-    
-    
-    FORCE_INLINE void checkRx(void)
-    {
-      if((M_UCSRxA & (1<<M_RXCx)) != 0) {
-        unsigned char c  =  M_UDRx;
-        int i = (unsigned int)(rx_buffer.head + 1) % RX_BUFFER_SIZE;
-
-        // if we should be storing the received character into the location
-        // just before the tail (meaning that the head would advance to the
-        // current location of the tail), we're about to overflow the buffer
-        // and so we don't write the character or advance the head.
-        if (i != rx_buffer.tail) {
-          rx_buffer.buffer[rx_buffer.head] = c;
-          rx_buffer.head = i;
-        }
-      }
-    }
-    
-    
     private:
-    void printNumber(unsigned long, uint8_t);
-    void printFloat(double, uint8_t);
-    
-    
-  public:
-    
-    FORCE_INLINE void write(const char *str)
-    {
-      while (*str)
-        write(*str++);
-    }
-
-
-    FORCE_INLINE void write(const uint8_t *buffer, size_t size)
-    {
-      while (size--)
-        write(*buffer++);
-    }
-
-    FORCE_INLINE void print(const String &s)
-    {
-      for (int i = 0; i < (int)s.length(); i++) {
-        write(s[i]);
-      }
-    }
-    
-    FORCE_INLINE void print(const char *str)
-    {
-      write(str);
-    }
-    void print(char, int = BYTE);
-    void print(unsigned char, int = BYTE);
-    void print(int, int = DEC);
-    void print(unsigned int, int = DEC);
-    void print(long, int = DEC);
-    void print(unsigned long, int = DEC);
-    void print(double, int = 2);
-
-    void println(const String &s);
-    void println(const char[]);
-    void println(char, int = BYTE);
-    void println(unsigned char, int = BYTE);
-    void println(int, int = DEC);
-    void println(unsigned int, int = DEC);
-    void println(long, int = DEC);
-    void println(unsigned long, int = DEC);
-    void println(double, int = 2);
-    void println(void);
-};
-
-extern MarlinSerial MSerial;
-#endif // !AT90USB
-
-// Use the UART for BT in AT90USB configurations
-#if defined(AT90USB) && defined (BTENABLED)
-   extern HardwareSerial bt;
+      static void printNumber(unsigned long, const uint8_t);
+      static void printFloat(double, uint8_t);
+
+    public:
+      static FORCE_INLINE void write(const char* str) { while (*str) write(*str++); }
+      static FORCE_INLINE void write(const uint8_t* buffer, size_t size) { while (size--) write(*buffer++); }
+      static FORCE_INLINE void print(const String& s) { for (int i = 0; i < (int)s.length(); i++) write(s[i]); }
+      static FORCE_INLINE void print(const char* str) { write(str); }
+
+      static void print(char, int = BYTE);
+      static void print(unsigned char, int = BYTE);
+      static void print(int, int = DEC);
+      static void print(unsigned int, int = DEC);
+      static void print(long, int = DEC);
+      static void print(unsigned long, int = DEC);
+      static void print(double, int = 2);
+
+      static void println(const String& s);
+      static void println(const char[]);
+      static void println(char, int = BYTE);
+      static void println(unsigned char, int = BYTE);
+      static void println(int, int = DEC);
+      static void println(unsigned int, int = DEC);
+      static void println(long, int = DEC);
+      static void println(unsigned long, int = DEC);
+      static void println(double, int = 2);
+      static void println(void);
+  };
+
+  extern MarlinSerial customizedSerial;
+
+#endif // !USBCON
+
+// Use the UART for Bluetooth in AT90USB configurations
+#if defined(USBCON) && ENABLED(BLUETOOTH)
+  extern HardwareSerial bluetoothSerial;
 #endif
 
-#endif
+#endif // MARLINSERIAL_H

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/Max7219_Debug_LEDs.cpp

@@ -0,0 +1,236 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * This module is off by default, but can be enabled to facilitate the display of
+ * extra debug information during code development. It assumes the existence of a
+ * Max7219 LED Matrix. A suitable device can be obtained on eBay similar to this:
+ * http://www.ebay.com/itm/191781645249 for under $2.00 including shipping.
+ *
+ * Just connect up +5v and GND to give it power, then connect up the pins assigned
+ * in Configuration_adv.h. For example, on the Re-ARM you could use:
+ *
+ *   #define MAX7219_CLK_PIN   77
+ *   #define MAX7219_DIN_PIN   78
+ *   #define MAX7219_LOAD_PIN  79
+ *
+ * Max7219_init() is called automatically at startup, and then there are a number of
+ * support functions available to control the LEDs in the 8x8 grid.
+ *
+ * void Max7219_init();
+ * void Max7219_PutByte(uint8_t data);
+ * void Max7219(uint8_t reg, uint8_t data);
+ * void Max7219_LED_On(uint8_t row, uint8_t col);
+ * void Max7219_LED_Off(uint8_t row, uint8_t col);
+ * void Max7219_LED_Toggle(uint8_t row, uint8_t col);
+ * void Max7219_Clear_Row(uint8_t row);
+ * void Max7219_Clear_Column(uint8_t col);
+ * void Max7219_Set_Row(uint8_t row, uint8_t val);
+ * void Max7219_Set_Column(uint8_t col, uint8_t val);
+ * void Max7219_idle_tasks();
+ */
+
+#include "MarlinConfig.h"
+
+#if ENABLED(MAX7219_DEBUG)
+
+  #include "Marlin.h"
+  #include "planner.h"
+  #include "stepper.h"
+  #include "Max7219_Debug_LEDs.h"
+
+  static uint8_t LEDs[8] = { 0 };
+
+  void Max7219_PutByte(uint8_t data) {
+    for (uint8_t i = 8; i--;) {
+      WRITE(MAX7219_CLK_PIN, LOW);       // tick
+      WRITE(MAX7219_DIN_PIN, (data & 0x80) ? HIGH : LOW);  // send 1 or 0 based on data bit
+      WRITE(MAX7219_CLK_PIN, HIGH);      // tock
+      data <<= 1;
+    }
+  }
+
+  void Max7219(const uint8_t reg, const uint8_t data) {
+    WRITE(MAX7219_LOAD_PIN, LOW);  // begin
+    Max7219_PutByte(reg);          // specify register
+    Max7219_PutByte(data);         // put data
+    WRITE(MAX7219_LOAD_PIN, LOW);  // and tell the chip to load the data
+    WRITE(MAX7219_LOAD_PIN, HIGH);
+  }
+
+  void Max7219_LED_Set(const uint8_t row, const uint8_t col, const bool on) {
+    if (row > 7 || col > 7) return;
+    if (TEST(LEDs[row], col) == on) return; // if LED is already on/off, leave alone
+    if (on) SBI(LEDs[row], col); else CBI(LEDs[row], col);
+    Max7219(8 - row, LEDs[row]);
+  }
+
+  void Max7219_LED_On(const uint8_t row, const uint8_t col) {
+    Max7219_LED_Set(row, col, true);
+  }
+
+  void Max7219_LED_Off(const uint8_t row, const uint8_t col) {
+    Max7219_LED_Set(row, col, false);
+  }
+
+  void Max7219_LED_Toggle(const uint8_t row, const uint8_t col) {
+    if (row > 7 || col > 7) return;
+    if (TEST(LEDs[row], col))
+      Max7219_LED_Off(row, col);
+    else
+      Max7219_LED_On(row, col);
+  }
+
+  void Max7219_Clear_Column(const uint8_t col) {
+    if (col > 7) return;
+    LEDs[col] = 0;
+    Max7219(8 - col, LEDs[col]);
+  }
+
+  void Max7219_Clear_Row(const uint8_t row) {
+    if (row > 7) return;
+    for (uint8_t c = 0; c <= 7; c++)
+      Max7219_LED_Off(c, row);
+  }
+
+  void Max7219_Set_Row(const uint8_t row, const uint8_t val) {
+    if (row > 7) return;
+    for (uint8_t b = 0; b <= 7; b++)
+      if (TEST(val, b))
+        Max7219_LED_On(7 - b, row);
+      else
+        Max7219_LED_Off(7 - b, row);
+  }
+
+  void Max7219_Set_Column(const uint8_t col, const uint8_t val) {
+    if (col > 7) return;
+    LEDs[col] = val;
+    Max7219(8 - col, LEDs[col]);
+  }
+
+  void Max7219_init() {
+    uint8_t i, x, y;
+
+    SET_OUTPUT(MAX7219_DIN_PIN);
+    SET_OUTPUT(MAX7219_CLK_PIN);
+
+    OUT_WRITE(MAX7219_LOAD_PIN, HIGH);
+
+    //initiation of the max 7219
+    Max7219(max7219_reg_scanLimit, 0x07);
+    Max7219(max7219_reg_decodeMode, 0x00);  // using an led matrix (not digits)
+    Max7219(max7219_reg_shutdown, 0x01);    // not in shutdown mode
+    Max7219(max7219_reg_displayTest, 0x00); // no display test
+    Max7219(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set
+                                                 // range: 0x00 to 0x0F
+    for (i = 0; i <= 7; i++) {      // empty registers, turn all LEDs off
+      LEDs[i] = 0x00;
+      Max7219(i + 1, 0);
+    }
+
+    for (x = 0; x <= 7; x++)        // Do an aesthetically pleasing pattern to fully test
+      for (y = 0; y <= 7; y++) {    // the Max7219 module and LEDs. First, turn them
+        Max7219_LED_On(x, y);       // all on.
+        delay(3);
+      }
+
+    for (x = 0; x <= 7; x++)        // Now, turn them all off.
+      for (y = 0; y <= 7; y++) {
+        Max7219_LED_Off(x, y);
+        delay(3);                   // delay() is OK here. Max7219_init() is only called from
+      }                             // setup() and nothing is running yet.
+
+    delay(150);
+
+    for (x = 8; x--;)               // Now, do the same thing from the opposite direction
+      for (y = 0; y <= 7; y++) {
+        Max7219_LED_On(x, y);
+        delay(2);
+      }
+
+    for (x = 8; x--;)
+      for (y = 0; y <= 7; y++) {
+        Max7219_LED_Off(x, y);
+        delay(2);
+      }
+  }
+
+/**
+ * These are sample debug features to demonstrate the usage of the 8x8 LED Matrix for debug purposes.
+ * There is very little CPU burden added to the system by displaying information within the idle()
+ * task.
+ *
+ * But with that said, if your debugging can be facilitated by making calls into the library from
+ * other places in the code, feel free to do it.  The CPU burden for a few calls to toggle an LED
+ * or clear a row is not very significant.
+ */
+  void Max7219_idle_tasks() {
+    #if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE)
+      static int debug_cnt = 0;
+      if (debug_cnt++ > 100) {
+        Max7219_LED_Toggle(7, 7);
+        debug_cnt = 0;
+      }
+    #endif
+
+    #ifdef MAX7219_DEBUG_STEPPER_HEAD
+      Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_HEAD);
+      Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_HEAD + 1);
+      if ( planner.block_buffer_head < 8)
+        Max7219_LED_On( planner.block_buffer_head, MAX7219_DEBUG_STEPPER_HEAD);
+      else
+        Max7219_LED_On( planner.block_buffer_head-8, MAX7219_DEBUG_STEPPER_HEAD+1);
+    #endif
+
+    #ifdef MAX7219_DEBUG_STEPPER_TAIL
+      Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_TAIL);
+      Max7219_Clear_Row(MAX7219_DEBUG_STEPPER_TAIL + 1);
+      if ( planner.block_buffer_tail < 8)
+        Max7219_LED_On( planner.block_buffer_tail, MAX7219_DEBUG_STEPPER_TAIL );
+      else
+        Max7219_LED_On( planner.block_buffer_tail-8, MAX7219_DEBUG_STEPPER_TAIL+1 );
+    #endif
+
+    #ifdef MAX7219_DEBUG_STEPPER_QUEUE
+      static int16_t last_depth = 0;
+      int16_t current_depth = planner.block_buffer_head - planner.block_buffer_tail;
+      if (current_depth != last_depth) {  // usually, no update will be needed.
+        if (current_depth < 0) current_depth += BLOCK_BUFFER_SIZE;
+        NOMORE(current_depth, BLOCK_BUFFER_SIZE);
+        NOMORE(current_depth, 16);        // if the BLOCK_BUFFER_SIZE is greater than 16, two lines
+                                          // of LEDs is enough to see if the buffer is draining
+
+        const uint8_t st = min(current_depth, last_depth),
+                      en = max(current_depth, last_depth);
+        if (current_depth < last_depth)
+          for (uint8_t i = st; i <= en; i++)   // clear the highest order LEDs
+            Max7219_LED_Off(i >> 1, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
+        else
+          for (uint8_t i = st; i <= en; i++)   // set the highest order LEDs
+            Max7219_LED_On(i >> 1, MAX7219_DEBUG_STEPPER_QUEUE + (i & 1));
+
+        last_depth = current_depth;
+      }
+    #endif
+  }
+
+#endif // MAX7219_DEBUG

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/Max7219_Debug_LEDs.h

@@ -0,0 +1,88 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * This module is off by default, but can be enabled to facilitate the display of
+ * extra debug information during code development. It assumes the existence of a
+ * Max7219 LED Matrix. A suitable device can be obtained on eBay similar to this:
+ * http://www.ebay.com/itm/191781645249 for under $2.00 including shipping.
+ *
+ * Just connect up +5v and GND to give it power, then connect up the pins assigned
+ * in Configuration_adv.h. For example, on the Re-ARM you could use:
+ *
+ *   #define MAX7219_CLK_PIN   77
+ *   #define MAX7219_DIN_PIN   78
+ *   #define MAX7219_LOAD_PIN  79
+ *
+ * Max7219_init() is called automatically at startup, and then there are a number of
+ * support functions available to control the LEDs in the 8x8 grid.
+ *
+ * void Max7219_init();
+ * void Max7219_PutByte(uint8_t data);
+ * void Max7219(uint8_t reg, uint8_t data);
+ * void Max7219_LED_Set(uint8_t row, uint8_t col, bool on);
+ * void Max7219_LED_On(uint8_t row, uint8_t col);
+ * void Max7219_LED_Off(uint8_t row, uint8_t col);
+ * void Max7219_LED_Toggle(uint8_t row, uint8_t col);
+ * void Max7219_Clear_Row(uint8_t row);
+ * void Max7219_Clear_Column(uint8_t col);
+ * void Max7219_Set_Row(uint8_t row, uint8_t val);
+ * void Max7219_Set_Column(uint8_t col, uint8_t val);
+ * void Max7219_idle_tasks();
+ */
+
+#ifndef __MAX7219_DEBUG_LEDS_H__
+#define __MAX7219_DEBUG_LEDS_H__
+
+  //
+  // define max7219 registers
+  //
+  #define max7219_reg_noop        0x00
+  #define max7219_reg_digit0      0x01
+  #define max7219_reg_digit1      0x02
+  #define max7219_reg_digit2      0x03
+  #define max7219_reg_digit3      0x04
+  #define max7219_reg_digit4      0x05
+  #define max7219_reg_digit5      0x06
+  #define max7219_reg_digit6      0x07
+  #define max7219_reg_digit7      0x08
+
+  #define max7219_reg_intensity   0x0A
+  #define max7219_reg_displayTest 0x0F
+  #define max7219_reg_decodeMode  0x09
+  #define max7219_reg_scanLimit   0x0B
+  #define max7219_reg_shutdown    0x0C
+
+  void Max7219_init();
+  void Max7219_PutByte(uint8_t data);
+  void Max7219(const uint8_t reg, const uint8_t data);
+  void Max7219_LED_Set(const uint8_t row, const uint8_t col, const bool on);
+  void Max7219_LED_On(const uint8_t row, const uint8_t col);
+  void Max7219_LED_Off(const uint8_t row, const uint8_t col);
+  void Max7219_LED_Toggle(const uint8_t row, const uint8_t col);
+  void Max7219_Clear_Row(const uint8_t row);
+  void Max7219_Clear_Column(const uint8_t col);
+  void Max7219_Set_Row(const uint8_t row, const uint8_t val);
+  void Max7219_Set_Column(const uint8_t col, const uint8_t val);
+  void Max7219_idle_tasks();
+
+#endif // __MAX7219_DEBUG_LEDS_H__

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/Sd2Card.h

@@ -1,241 +1,251 @@
-/* Arduino Sd2Card Library
- * Copyright (C) 2009 by William Greiman
- *
- * This file is part of the Arduino Sd2Card Library
- *
- * This Library is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This Library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Arduino Sd2Card Library.  If not, see
- * <http://www.gnu.org/licenses/>.
- */
-
-#include "Marlin.h"
-#ifdef SDSUPPORT
-
-#ifndef Sd2Card_h
-#define Sd2Card_h
-/**
- * \file
- * \brief Sd2Card class for V2 SD/SDHC cards
- */
-#include "SdFatConfig.h"
-#include "Sd2PinMap.h"
-#include "SdInfo.h"
-//------------------------------------------------------------------------------
-// SPI speed is F_CPU/2^(1 + index), 0 <= index <= 6
-/** Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate(). */
-uint8_t const SPI_FULL_SPEED = 0;
-/** Set SCK rate to F_CPU/4. See Sd2Card::setSckRate(). */
-uint8_t const SPI_HALF_SPEED = 1;
-/** Set SCK rate to F_CPU/8. See Sd2Card::setSckRate(). */
-uint8_t const SPI_QUARTER_SPEED = 2;
-/** Set SCK rate to F_CPU/16. See Sd2Card::setSckRate(). */
-uint8_t const SPI_EIGHTH_SPEED = 3;
-/** Set SCK rate to F_CPU/32. See Sd2Card::setSckRate(). */
-uint8_t const SPI_SIXTEENTH_SPEED = 4;
-//------------------------------------------------------------------------------
-/** init timeout ms */
-uint16_t const SD_INIT_TIMEOUT = 2000;
-/** erase timeout ms */
-uint16_t const SD_ERASE_TIMEOUT = 10000;
-/** read timeout ms */
-uint16_t const SD_READ_TIMEOUT = 300;
-/** write time out ms */
-uint16_t const SD_WRITE_TIMEOUT = 600;
-//------------------------------------------------------------------------------
-// SD card errors
-/** timeout error for command CMD0 (initialize card in SPI mode) */
-uint8_t const SD_CARD_ERROR_CMD0 = 0X1;
-/** CMD8 was not accepted - not a valid SD card*/
-uint8_t const SD_CARD_ERROR_CMD8 = 0X2;
-/** card returned an error response for CMD12 (write stop) */
-uint8_t const SD_CARD_ERROR_CMD12 = 0X3;
-/** card returned an error response for CMD17 (read block) */
-uint8_t const SD_CARD_ERROR_CMD17 = 0X4;
-/** card returned an error response for CMD18 (read multiple block) */
-uint8_t const SD_CARD_ERROR_CMD18 = 0X5;
-/** card returned an error response for CMD24 (write block) */
-uint8_t const SD_CARD_ERROR_CMD24 = 0X6;
-/**  WRITE_MULTIPLE_BLOCKS command failed */
-uint8_t const SD_CARD_ERROR_CMD25 = 0X7;
-/** card returned an error response for CMD58 (read OCR) */
-uint8_t const SD_CARD_ERROR_CMD58 = 0X8;
-/** SET_WR_BLK_ERASE_COUNT failed */
-uint8_t const SD_CARD_ERROR_ACMD23 = 0X9;
-/** ACMD41 initialization process timeout */
-uint8_t const SD_CARD_ERROR_ACMD41 = 0XA;
-/** card returned a bad CSR version field */
-uint8_t const SD_CARD_ERROR_BAD_CSD = 0XB;
-/** erase block group command failed */
-uint8_t const SD_CARD_ERROR_ERASE = 0XC;
-/** card not capable of single block erase */
-uint8_t const SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0XD;
-/** Erase sequence timed out */
-uint8_t const SD_CARD_ERROR_ERASE_TIMEOUT = 0XE;
-/** card returned an error token instead of read data */
-uint8_t const SD_CARD_ERROR_READ = 0XF;
-/** read CID or CSD failed */
-uint8_t const SD_CARD_ERROR_READ_REG = 0X10;
-/** timeout while waiting for start of read data */
-uint8_t const SD_CARD_ERROR_READ_TIMEOUT = 0X11;
-/** card did not accept STOP_TRAN_TOKEN */
-uint8_t const SD_CARD_ERROR_STOP_TRAN = 0X12;
-/** card returned an error token as a response to a write operation */
-uint8_t const SD_CARD_ERROR_WRITE = 0X13;
-/** attempt to write protected block zero */
-uint8_t const SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0X14;  // REMOVE - not used
-/** card did not go ready for a multiple block write */
-uint8_t const SD_CARD_ERROR_WRITE_MULTIPLE = 0X15;
-/** card returned an error to a CMD13 status check after a write */
-uint8_t const SD_CARD_ERROR_WRITE_PROGRAMMING = 0X16;
-/** timeout occurred during write programming */
-uint8_t const SD_CARD_ERROR_WRITE_TIMEOUT = 0X17;
-/** incorrect rate selected */
-uint8_t const SD_CARD_ERROR_SCK_RATE = 0X18;
-/** init() not called */
-uint8_t const SD_CARD_ERROR_INIT_NOT_CALLED = 0X19;
-//------------------------------------------------------------------------------
-// card types
-/** Standard capacity V1 SD card */
-uint8_t const SD_CARD_TYPE_SD1  = 1;
-/** Standard capacity V2 SD card */
-uint8_t const SD_CARD_TYPE_SD2  = 2;
-/** High Capacity SD card */
-uint8_t const SD_CARD_TYPE_SDHC = 3;
-/**
- * define SOFTWARE_SPI to use bit-bang SPI
- */
-//------------------------------------------------------------------------------
-#if MEGA_SOFT_SPI && (defined(__AVR_ATmega1280__)||defined(__AVR_ATmega2560__))
-#define SOFTWARE_SPI
-#elif USE_SOFTWARE_SPI
-#define SOFTWARE_SPI
-#endif  // MEGA_SOFT_SPI
-//------------------------------------------------------------------------------
-// SPI pin definitions - do not edit here - change in SdFatConfig.h
-//
-#ifndef SOFTWARE_SPI
-// hardware pin defs
-/** The default chip select pin for the SD card is SS. */
-uint8_t const  SD_CHIP_SELECT_PIN = SS_PIN;
-// The following three pins must not be redefined for hardware SPI.
-/** SPI Master Out Slave In pin */
-uint8_t const  SPI_MOSI_PIN = MOSI_PIN;
-/** SPI Master In Slave Out pin */
-uint8_t const  SPI_MISO_PIN = MISO_PIN;
-/** SPI Clock pin */
-uint8_t const  SPI_SCK_PIN = SCK_PIN;
-
-#else  // SOFTWARE_SPI
-
-/** SPI chip select pin */
-uint8_t const SD_CHIP_SELECT_PIN = SOFT_SPI_CS_PIN;
-/** SPI Master Out Slave In pin */
-uint8_t const SPI_MOSI_PIN = SOFT_SPI_MOSI_PIN;
-/** SPI Master In Slave Out pin */
-uint8_t const SPI_MISO_PIN = SOFT_SPI_MISO_PIN;
-/** SPI Clock pin */
-uint8_t const SPI_SCK_PIN = SOFT_SPI_SCK_PIN;
-#endif  // SOFTWARE_SPI
-//------------------------------------------------------------------------------
-/**
- * \class Sd2Card
- * \brief Raw access to SD and SDHC flash memory cards.
- */
-class Sd2Card {
- public:
-  /** Construct an instance of Sd2Card. */
-  Sd2Card() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0) {}
-  uint32_t cardSize();
-  bool erase(uint32_t firstBlock, uint32_t lastBlock);
-  bool eraseSingleBlockEnable();
-  /**
-   *  Set SD error code.
-   *  \param[in] code value for error code.
-   */
-  void error(uint8_t code) {errorCode_ = code;}
-  /**
-   * \return error code for last error. See Sd2Card.h for a list of error codes.
-   */
-  int errorCode() const {return errorCode_;}
-  /** \return error data for last error. */
-  int errorData() const {return status_;}
-  /**
-   * Initialize an SD flash memory card with default clock rate and chip
-   * select pin.  See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).
-   *
-   * \return true for success or false for failure.
-   */
-  bool init(uint8_t sckRateID = SPI_FULL_SPEED,
-    uint8_t chipSelectPin = SD_CHIP_SELECT_PIN);
-  bool readBlock(uint32_t block, uint8_t* dst);
-  /**
-   * Read a card's CID register. The CID contains card identification
-   * information such as Manufacturer ID, Product name, Product serial
-   * number and Manufacturing date. 
-   *
-   * \param[out] cid pointer to area for returned data.
-   *
-   * \return true for success or false for failure.
-   */
-  bool readCID(cid_t* cid) {
-    return readRegister(CMD10, cid);
-  }
-  /**
-   * Read a card's CSD register. The CSD contains Card-Specific Data that
-   * provides information regarding access to the card's contents.
-   *
-   * \param[out] csd pointer to area for returned data.
-   *
-   * \return true for success or false for failure.
-   */
-  bool readCSD(csd_t* csd) {
-    return readRegister(CMD9, csd);
-  }
-  bool readData(uint8_t *dst);
-  bool readStart(uint32_t blockNumber);
-  bool readStop();
-  bool setSckRate(uint8_t sckRateID);
-  /** Return the card type: SD V1, SD V2 or SDHC
-   * \return 0 - SD V1, 1 - SD V2, or 3 - SDHC.
-   */
-  int type() const {return type_;}
-  bool writeBlock(uint32_t blockNumber, const uint8_t* src);
-  bool writeData(const uint8_t* src);
-  bool writeStart(uint32_t blockNumber, uint32_t eraseCount);
-  bool writeStop();
- private:
-  //----------------------------------------------------------------------------
-  uint8_t chipSelectPin_;
-  uint8_t errorCode_;
-  uint8_t spiRate_;
-  uint8_t status_;
-  uint8_t type_;
-  // private functions
-  uint8_t cardAcmd(uint8_t cmd, uint32_t arg) {
-    cardCommand(CMD55, 0);
-    return cardCommand(cmd, arg);
-  }
-  uint8_t cardCommand(uint8_t cmd, uint32_t arg);
-
-  bool readData(uint8_t* dst, uint16_t count);
-  bool readRegister(uint8_t cmd, void* buf);
-  void chipSelectHigh();
-  void chipSelectLow();
-  void type(uint8_t value) {type_ = value;}
-  bool waitNotBusy(uint16_t timeoutMillis);
-  bool writeData(uint8_t token, const uint8_t* src);
-};
-#endif  // Sd2Card_h
-
-
-#endif
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino Sd2Card Library
+ * Copyright (C) 2009 by William Greiman
+ *
+ * This file is part of the Arduino Sd2Card Library
+ */
+
+#include "Marlin.h"
+#if ENABLED(SDSUPPORT)
+
+#ifndef Sd2Card_h
+#define Sd2Card_h
+/**
+ * \file
+ * \brief Sd2Card class for V2 SD/SDHC cards
+ */
+#include "SdFatConfig.h"
+#include "SdInfo.h"
+//------------------------------------------------------------------------------
+// SPI speed is F_CPU/2^(1 + index), 0 <= index <= 6
+/** Set SCK to max rate of F_CPU/2. See Sd2Card::setSckRate(). */
+uint8_t const SPI_FULL_SPEED = 0;
+/** Set SCK rate to F_CPU/4. See Sd2Card::setSckRate(). */
+uint8_t const SPI_HALF_SPEED = 1;
+/** Set SCK rate to F_CPU/8. See Sd2Card::setSckRate(). */
+uint8_t const SPI_QUARTER_SPEED = 2;
+/** Set SCK rate to F_CPU/16. See Sd2Card::setSckRate(). */
+uint8_t const SPI_EIGHTH_SPEED = 3;
+/** Set SCK rate to F_CPU/32. See Sd2Card::setSckRate(). */
+uint8_t const SPI_SIXTEENTH_SPEED = 4;
+//------------------------------------------------------------------------------
+/** init timeout ms */
+uint16_t const SD_INIT_TIMEOUT = 2000;
+/** erase timeout ms */
+uint16_t const SD_ERASE_TIMEOUT = 10000;
+/** read timeout ms */
+uint16_t const SD_READ_TIMEOUT = 300;
+/** write time out ms */
+uint16_t const SD_WRITE_TIMEOUT = 600;
+//------------------------------------------------------------------------------
+// SD card errors
+/** timeout error for command CMD0 (initialize card in SPI mode) */
+uint8_t const SD_CARD_ERROR_CMD0 = 0X1;
+/** CMD8 was not accepted - not a valid SD card*/
+uint8_t const SD_CARD_ERROR_CMD8 = 0X2;
+/** card returned an error response for CMD12 (write stop) */
+uint8_t const SD_CARD_ERROR_CMD12 = 0X3;
+/** card returned an error response for CMD17 (read block) */
+uint8_t const SD_CARD_ERROR_CMD17 = 0X4;
+/** card returned an error response for CMD18 (read multiple block) */
+uint8_t const SD_CARD_ERROR_CMD18 = 0X5;
+/** card returned an error response for CMD24 (write block) */
+uint8_t const SD_CARD_ERROR_CMD24 = 0X6;
+/**  WRITE_MULTIPLE_BLOCKS command failed */
+uint8_t const SD_CARD_ERROR_CMD25 = 0X7;
+/** card returned an error response for CMD58 (read OCR) */
+uint8_t const SD_CARD_ERROR_CMD58 = 0X8;
+/** SET_WR_BLK_ERASE_COUNT failed */
+uint8_t const SD_CARD_ERROR_ACMD23 = 0X9;
+/** ACMD41 initialization process timeout */
+uint8_t const SD_CARD_ERROR_ACMD41 = 0XA;
+/** card returned a bad CSR version field */
+uint8_t const SD_CARD_ERROR_BAD_CSD = 0XB;
+/** erase block group command failed */
+uint8_t const SD_CARD_ERROR_ERASE = 0XC;
+/** card not capable of single block erase */
+uint8_t const SD_CARD_ERROR_ERASE_SINGLE_BLOCK = 0XD;
+/** Erase sequence timed out */
+uint8_t const SD_CARD_ERROR_ERASE_TIMEOUT = 0XE;
+/** card returned an error token instead of read data */
+uint8_t const SD_CARD_ERROR_READ = 0XF;
+/** read CID or CSD failed */
+uint8_t const SD_CARD_ERROR_READ_REG = 0x10;
+/** timeout while waiting for start of read data */
+uint8_t const SD_CARD_ERROR_READ_TIMEOUT = 0x11;
+/** card did not accept STOP_TRAN_TOKEN */
+uint8_t const SD_CARD_ERROR_STOP_TRAN = 0x12;
+/** card returned an error token as a response to a write operation */
+uint8_t const SD_CARD_ERROR_WRITE = 0x13;
+/** attempt to write protected block zero */
+uint8_t const SD_CARD_ERROR_WRITE_BLOCK_ZERO = 0x14;  // REMOVE - not used
+/** card did not go ready for a multiple block write */
+uint8_t const SD_CARD_ERROR_WRITE_MULTIPLE = 0x15;
+/** card returned an error to a CMD13 status check after a write */
+uint8_t const SD_CARD_ERROR_WRITE_PROGRAMMING = 0x16;
+/** timeout occurred during write programming */
+uint8_t const SD_CARD_ERROR_WRITE_TIMEOUT = 0x17;
+/** incorrect rate selected */
+uint8_t const SD_CARD_ERROR_SCK_RATE = 0x18;
+/** init() not called */
+uint8_t const SD_CARD_ERROR_INIT_NOT_CALLED = 0x19;
+/** crc check error */
+uint8_t const SD_CARD_ERROR_CRC = 0x20;
+//------------------------------------------------------------------------------
+// card types
+/** Standard capacity V1 SD card */
+uint8_t const SD_CARD_TYPE_SD1  = 1;
+/** Standard capacity V2 SD card */
+uint8_t const SD_CARD_TYPE_SD2  = 2;
+/** High Capacity SD card */
+uint8_t const SD_CARD_TYPE_SDHC = 3;
+/**
+ * define SOFTWARE_SPI to use bit-bang SPI
+ */
+//------------------------------------------------------------------------------
+#if MEGA_SOFT_SPI
+  #define SOFTWARE_SPI
+#elif USE_SOFTWARE_SPI
+  #define SOFTWARE_SPI
+#endif  // MEGA_SOFT_SPI
+//------------------------------------------------------------------------------
+// SPI pin definitions - do not edit here - change in SdFatConfig.h
+//
+#if DISABLED(SOFTWARE_SPI)
+  // hardware pin defs
+  /** The default chip select pin for the SD card is SS. */
+  #define SD_CHIP_SELECT_PIN SS_PIN
+  // The following three pins must not be redefined for hardware SPI.
+  /** SPI Master Out Slave In pin */
+  #define SPI_MOSI_PIN MOSI_PIN
+  /** SPI Master In Slave Out pin */
+  #define SPI_MISO_PIN MISO_PIN
+  /** SPI Clock pin */
+  #define SPI_SCK_PIN SCK_PIN
+
+#else  // SOFTWARE_SPI
+
+  /** SPI chip select pin */
+  #define SD_CHIP_SELECT_PIN SOFT_SPI_CS_PIN
+  /** SPI Master Out Slave In pin */
+  #define SPI_MOSI_PIN SOFT_SPI_MOSI_PIN
+  /** SPI Master In Slave Out pin */
+  #define SPI_MISO_PIN SOFT_SPI_MISO_PIN
+  /** SPI Clock pin */
+  #define SPI_SCK_PIN SOFT_SPI_SCK_PIN
+#endif  // SOFTWARE_SPI
+//------------------------------------------------------------------------------
+/**
+ * \class Sd2Card
+ * \brief Raw access to SD and SDHC flash memory cards.
+ */
+class Sd2Card {
+ public:
+  /** Construct an instance of Sd2Card. */
+  Sd2Card() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0) {}
+  uint32_t cardSize();
+  bool erase(uint32_t firstBlock, uint32_t lastBlock);
+  bool eraseSingleBlockEnable();
+  /**
+   *  Set SD error code.
+   *  \param[in] code value for error code.
+   */
+  void error(uint8_t code) {errorCode_ = code;}
+  /**
+   * \return error code for last error. See Sd2Card.h for a list of error codes.
+   */
+  int errorCode() const {return errorCode_;}
+  /** \return error data for last error. */
+  int errorData() const {return status_;}
+  /**
+   * Initialize an SD flash memory card with default clock rate and chip
+   * select pin.  See sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin).
+   *
+   * \return true for success or false for failure.
+   */
+  bool init(uint8_t sckRateID = SPI_FULL_SPEED,
+            uint8_t chipSelectPin = SD_CHIP_SELECT_PIN);
+  bool readBlock(uint32_t block, uint8_t* dst);
+  /**
+   * Read a card's CID register. The CID contains card identification
+   * information such as Manufacturer ID, Product name, Product serial
+   * number and Manufacturing date.
+   *
+   * \param[out] cid pointer to area for returned data.
+   *
+   * \return true for success or false for failure.
+   */
+  bool readCID(cid_t* cid) {
+    return readRegister(CMD10, cid);
+  }
+  /**
+   * Read a card's CSD register. The CSD contains Card-Specific Data that
+   * provides information regarding access to the card's contents.
+   *
+   * \param[out] csd pointer to area for returned data.
+   *
+   * \return true for success or false for failure.
+   */
+  bool readCSD(csd_t* csd) {
+    return readRegister(CMD9, csd);
+  }
+  bool readData(uint8_t* dst);
+  bool readStart(uint32_t blockNumber);
+  bool readStop();
+  bool setSckRate(uint8_t sckRateID);
+  /** Return the card type: SD V1, SD V2 or SDHC
+   * \return 0 - SD V1, 1 - SD V2, or 3 - SDHC.
+   */
+  int type() const {return type_;}
+  bool writeBlock(uint32_t blockNumber, const uint8_t* src);
+  bool writeData(const uint8_t* src);
+  bool writeStart(uint32_t blockNumber, uint32_t eraseCount);
+  bool writeStop();
+ private:
+  //----------------------------------------------------------------------------
+  uint8_t chipSelectPin_;
+  uint8_t errorCode_;
+  uint8_t spiRate_;
+  uint8_t status_;
+  uint8_t type_;
+  // private functions
+  uint8_t cardAcmd(uint8_t cmd, uint32_t arg) {
+    cardCommand(CMD55, 0);
+    return cardCommand(cmd, arg);
+  }
+  uint8_t cardCommand(uint8_t cmd, uint32_t arg);
+
+  bool readData(uint8_t* dst, uint16_t count);
+  bool readRegister(uint8_t cmd, void* buf);
+  void chipSelectHigh();
+  void chipSelectLow();
+  void type(uint8_t value) {type_ = value;}
+  bool waitNotBusy(uint16_t timeoutMillis);
+  bool writeData(uint8_t token, const uint8_t* src);
+};
+#endif  // Sd2Card_h
+
+
+#endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/Sd2PinMap.h

@@ -1,368 +0,0 @@
-/* Arduino SdFat Library
- * Copyright (C) 2010 by William Greiman
- *
- * This file is part of the Arduino SdFat Library
- *
- * This Library is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This Library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Arduino SdFat Library.  If not, see
- * <http://www.gnu.org/licenses/>.
- */
-// Warning this file was generated by a program.
-#include "Marlin.h"
-#ifdef SDSUPPORT
-
-#ifndef Sd2PinMap_h
-#define Sd2PinMap_h
-#include <avr/io.h>
-//------------------------------------------------------------------------------
-/** struct for mapping digital pins */
-struct pin_map_t {
-  volatile uint8_t* ddr;
-  volatile uint8_t* pin;
-  volatile uint8_t* port;
-  uint8_t bit;
-};
-//------------------------------------------------------------------------------
-#if defined(__AVR_ATmega1280__)\
-|| defined(__AVR_ATmega2560__)
-// Mega
-
-// Two Wire (aka I2C) ports
-uint8_t const SDA_PIN = 20;  // D1
-uint8_t const SCL_PIN = 21;  // D0
-
-#undef MOSI_PIN
-#undef MISO_PIN
-// SPI port
-uint8_t const SS_PIN = 53;    // B0
-uint8_t const MOSI_PIN = 51;  // B2
-uint8_t const MISO_PIN = 50;  // B3
-uint8_t const SCK_PIN = 52;   // B1
-
-static const pin_map_t digitalPinMap[] = {
-  {&DDRE, &PINE, &PORTE, 0},  // E0  0
-  {&DDRE, &PINE, &PORTE, 1},  // E1  1
-  {&DDRE, &PINE, &PORTE, 4},  // E4  2
-  {&DDRE, &PINE, &PORTE, 5},  // E5  3
-  {&DDRG, &PING, &PORTG, 5},  // G5  4
-  {&DDRE, &PINE, &PORTE, 3},  // E3  5
-  {&DDRH, &PINH, &PORTH, 3},  // H3  6
-  {&DDRH, &PINH, &PORTH, 4},  // H4  7
-  {&DDRH, &PINH, &PORTH, 5},  // H5  8
-  {&DDRH, &PINH, &PORTH, 6},  // H6  9
-  {&DDRB, &PINB, &PORTB, 4},  // B4 10
-  {&DDRB, &PINB, &PORTB, 5},  // B5 11
-  {&DDRB, &PINB, &PORTB, 6},  // B6 12
-  {&DDRB, &PINB, &PORTB, 7},  // B7 13
-  {&DDRJ, &PINJ, &PORTJ, 1},  // J1 14
-  {&DDRJ, &PINJ, &PORTJ, 0},  // J0 15
-  {&DDRH, &PINH, &PORTH, 1},  // H1 16
-  {&DDRH, &PINH, &PORTH, 0},  // H0 17
-  {&DDRD, &PIND, &PORTD, 3},  // D3 18
-  {&DDRD, &PIND, &PORTD, 2},  // D2 19
-  {&DDRD, &PIND, &PORTD, 1},  // D1 20
-  {&DDRD, &PIND, &PORTD, 0},  // D0 21
-  {&DDRA, &PINA, &PORTA, 0},  // A0 22
-  {&DDRA, &PINA, &PORTA, 1},  // A1 23
-  {&DDRA, &PINA, &PORTA, 2},  // A2 24
-  {&DDRA, &PINA, &PORTA, 3},  // A3 25
-  {&DDRA, &PINA, &PORTA, 4},  // A4 26
-  {&DDRA, &PINA, &PORTA, 5},  // A5 27
-  {&DDRA, &PINA, &PORTA, 6},  // A6 28
-  {&DDRA, &PINA, &PORTA, 7},  // A7 29
-  {&DDRC, &PINC, &PORTC, 7},  // C7 30
-  {&DDRC, &PINC, &PORTC, 6},  // C6 31
-  {&DDRC, &PINC, &PORTC, 5},  // C5 32
-  {&DDRC, &PINC, &PORTC, 4},  // C4 33
-  {&DDRC, &PINC, &PORTC, 3},  // C3 34
-  {&DDRC, &PINC, &PORTC, 2},  // C2 35
-  {&DDRC, &PINC, &PORTC, 1},  // C1 36
-  {&DDRC, &PINC, &PORTC, 0},  // C0 37
-  {&DDRD, &PIND, &PORTD, 7},  // D7 38
-  {&DDRG, &PING, &PORTG, 2},  // G2 39
-  {&DDRG, &PING, &PORTG, 1},  // G1 40
-  {&DDRG, &PING, &PORTG, 0},  // G0 41
-  {&DDRL, &PINL, &PORTL, 7},  // L7 42
-  {&DDRL, &PINL, &PORTL, 6},  // L6 43
-  {&DDRL, &PINL, &PORTL, 5},  // L5 44
-  {&DDRL, &PINL, &PORTL, 4},  // L4 45
-  {&DDRL, &PINL, &PORTL, 3},  // L3 46
-  {&DDRL, &PINL, &PORTL, 2},  // L2 47
-  {&DDRL, &PINL, &PORTL, 1},  // L1 48
-  {&DDRL, &PINL, &PORTL, 0},  // L0 49
-  {&DDRB, &PINB, &PORTB, 3},  // B3 50
-  {&DDRB, &PINB, &PORTB, 2},  // B2 51
-  {&DDRB, &PINB, &PORTB, 1},  // B1 52
-  {&DDRB, &PINB, &PORTB, 0},  // B0 53
-  {&DDRF, &PINF, &PORTF, 0},  // F0 54
-  {&DDRF, &PINF, &PORTF, 1},  // F1 55
-  {&DDRF, &PINF, &PORTF, 2},  // F2 56
-  {&DDRF, &PINF, &PORTF, 3},  // F3 57
-  {&DDRF, &PINF, &PORTF, 4},  // F4 58
-  {&DDRF, &PINF, &PORTF, 5},  // F5 59
-  {&DDRF, &PINF, &PORTF, 6},  // F6 60
-  {&DDRF, &PINF, &PORTF, 7},  // F7 61
-  {&DDRK, &PINK, &PORTK, 0},  // K0 62
-  {&DDRK, &PINK, &PORTK, 1},  // K1 63
-  {&DDRK, &PINK, &PORTK, 2},  // K2 64
-  {&DDRK, &PINK, &PORTK, 3},  // K3 65
-  {&DDRK, &PINK, &PORTK, 4},  // K4 66
-  {&DDRK, &PINK, &PORTK, 5},  // K5 67
-  {&DDRK, &PINK, &PORTK, 6},  // K6 68
-  {&DDRK, &PINK, &PORTK, 7}   // K7 69
-};
-//------------------------------------------------------------------------------
-#elif defined(__AVR_ATmega644P__)\
-|| defined(__AVR_ATmega644__)\
-|| defined(__AVR_ATmega1284P__)
-// Sanguino
-
-// Two Wire (aka I2C) ports
-uint8_t const SDA_PIN = 17;  // C1
-uint8_t const SCL_PIN = 18;  // C2
-
-// SPI port
-uint8_t const SS_PIN = 4;    // B4
-uint8_t const MOSI_PIN = 5;  // B5
-uint8_t const MISO_PIN = 6;  // B6
-uint8_t const SCK_PIN = 7;   // B7
-
-static const pin_map_t digitalPinMap[] = {
-  {&DDRB, &PINB, &PORTB, 0},  // B0  0
-  {&DDRB, &PINB, &PORTB, 1},  // B1  1
-  {&DDRB, &PINB, &PORTB, 2},  // B2  2
-  {&DDRB, &PINB, &PORTB, 3},  // B3  3
-  {&DDRB, &PINB, &PORTB, 4},  // B4  4
-  {&DDRB, &PINB, &PORTB, 5},  // B5  5
-  {&DDRB, &PINB, &PORTB, 6},  // B6  6
-  {&DDRB, &PINB, &PORTB, 7},  // B7  7
-  {&DDRD, &PIND, &PORTD, 0},  // D0  8
-  {&DDRD, &PIND, &PORTD, 1},  // D1  9
-  {&DDRD, &PIND, &PORTD, 2},  // D2 10
-  {&DDRD, &PIND, &PORTD, 3},  // D3 11
-  {&DDRD, &PIND, &PORTD, 4},  // D4 12
-  {&DDRD, &PIND, &PORTD, 5},  // D5 13
-  {&DDRD, &PIND, &PORTD, 6},  // D6 14
-  {&DDRD, &PIND, &PORTD, 7},  // D7 15
-  {&DDRC, &PINC, &PORTC, 0},  // C0 16
-  {&DDRC, &PINC, &PORTC, 1},  // C1 17
-  {&DDRC, &PINC, &PORTC, 2},  // C2 18
-  {&DDRC, &PINC, &PORTC, 3},  // C3 19
-  {&DDRC, &PINC, &PORTC, 4},  // C4 20
-  {&DDRC, &PINC, &PORTC, 5},  // C5 21
-  {&DDRC, &PINC, &PORTC, 6},  // C6 22
-  {&DDRC, &PINC, &PORTC, 7},  // C7 23
-  {&DDRA, &PINA, &PORTA, 7},  // A7 24
-  {&DDRA, &PINA, &PORTA, 6},  // A6 25
-  {&DDRA, &PINA, &PORTA, 5},  // A5 26
-  {&DDRA, &PINA, &PORTA, 4},  // A4 27
-  {&DDRA, &PINA, &PORTA, 3},  // A3 28
-  {&DDRA, &PINA, &PORTA, 2},  // A2 29
-  {&DDRA, &PINA, &PORTA, 1},  // A1 30
-  {&DDRA, &PINA, &PORTA, 0}   // A0 31
-};
-//------------------------------------------------------------------------------
-#elif defined(__AVR_ATmega32U4__)
-// Teensy 2.0
-
-// Two Wire (aka I2C) ports
-uint8_t const SDA_PIN = 6;  // D1
-uint8_t const SCL_PIN = 5;  // D0
-
-// SPI port
-uint8_t const SS_PIN = 0;    // B0
-uint8_t const MOSI_PIN = 2;  // B2
-uint8_t const MISO_PIN = 3;  // B3
-uint8_t const SCK_PIN = 1;   // B1
-
-static const pin_map_t digitalPinMap[] = {
-  {&DDRB, &PINB, &PORTB, 0},  // B0  0
-  {&DDRB, &PINB, &PORTB, 1},  // B1  1
-  {&DDRB, &PINB, &PORTB, 2},  // B2  2
-  {&DDRB, &PINB, &PORTB, 3},  // B3  3
-  {&DDRB, &PINB, &PORTB, 7},  // B7  4
-  {&DDRD, &PIND, &PORTD, 0},  // D0  5
-  {&DDRD, &PIND, &PORTD, 1},  // D1  6
-  {&DDRD, &PIND, &PORTD, 2},  // D2  7
-  {&DDRD, &PIND, &PORTD, 3},  // D3  8
-  {&DDRC, &PINC, &PORTC, 6},  // C6  9
-  {&DDRC, &PINC, &PORTC, 7},  // C7 10
-  {&DDRD, &PIND, &PORTD, 6},  // D6 11
-  {&DDRD, &PIND, &PORTD, 7},  // D7 12
-  {&DDRB, &PINB, &PORTB, 4},  // B4 13
-  {&DDRB, &PINB, &PORTB, 5},  // B5 14
-  {&DDRB, &PINB, &PORTB, 6},  // B6 15
-  {&DDRF, &PINF, &PORTF, 7},  // F7 16
-  {&DDRF, &PINF, &PORTF, 6},  // F6 17
-  {&DDRF, &PINF, &PORTF, 5},  // F5 18
-  {&DDRF, &PINF, &PORTF, 4},  // F4 19
-  {&DDRF, &PINF, &PORTF, 1},  // F1 20
-  {&DDRF, &PINF, &PORTF, 0},  // F0 21
-  {&DDRD, &PIND, &PORTD, 4},  // D4 22
-  {&DDRD, &PIND, &PORTD, 5},  // D5 23
-  {&DDRE, &PINE, &PORTE, 6}   // E6 24
-};
-//------------------------------------------------------------------------------
-#elif defined(__AVR_AT90USB646__)\
-|| defined(__AVR_AT90USB1286__)
-// Teensy++ 1.0 & 2.0
-
-// Two Wire (aka I2C) ports
-uint8_t const SDA_PIN = 1;  // D1
-uint8_t const SCL_PIN = 0;  // D0
-
-// SPI port
-uint8_t const SS_PIN    = 20;    // B0
-uint8_t const MOSI_PIN  = 22;    // B2
-uint8_t const MISO_PIN  = 23;    // B3
-uint8_t const SCK_PIN   = 21;    // B1
-
-static const pin_map_t digitalPinMap[] = {
-  {&DDRD, &PIND, &PORTD, 0},  // D0  0
-  {&DDRD, &PIND, &PORTD, 1},  // D1  1
-  {&DDRD, &PIND, &PORTD, 2},  // D2  2
-  {&DDRD, &PIND, &PORTD, 3},  // D3  3
-  {&DDRD, &PIND, &PORTD, 4},  // D4  4
-  {&DDRD, &PIND, &PORTD, 5},  // D5  5
-  {&DDRD, &PIND, &PORTD, 6},  // D6  6
-  {&DDRD, &PIND, &PORTD, 7},  // D7  7
-  {&DDRE, &PINE, &PORTE, 0},  // E0  8
-  {&DDRE, &PINE, &PORTE, 1},  // E1  9
-  {&DDRC, &PINC, &PORTC, 0},  // C0 10
-  {&DDRC, &PINC, &PORTC, 1},  // C1 11
-  {&DDRC, &PINC, &PORTC, 2},  // C2 12
-  {&DDRC, &PINC, &PORTC, 3},  // C3 13
-  {&DDRC, &PINC, &PORTC, 4},  // C4 14
-  {&DDRC, &PINC, &PORTC, 5},  // C5 15
-  {&DDRC, &PINC, &PORTC, 6},  // C6 16
-  {&DDRC, &PINC, &PORTC, 7},  // C7 17
-  {&DDRE, &PINE, &PORTE, 6},  // E6 18
-  {&DDRE, &PINE, &PORTE, 7},  // E7 19
-  {&DDRB, &PINB, &PORTB, 0},  // B0 20
-  {&DDRB, &PINB, &PORTB, 1},  // B1 21
-  {&DDRB, &PINB, &PORTB, 2},  // B2 22
-  {&DDRB, &PINB, &PORTB, 3},  // B3 23
-  {&DDRB, &PINB, &PORTB, 4},  // B4 24
-  {&DDRB, &PINB, &PORTB, 5},  // B5 25
-  {&DDRB, &PINB, &PORTB, 6},  // B6 26
-  {&DDRB, &PINB, &PORTB, 7},  // B7 27
-  {&DDRA, &PINA, &PORTA, 0},  // A0 28
-  {&DDRA, &PINA, &PORTA, 1},  // A1 29
-  {&DDRA, &PINA, &PORTA, 2},  // A2 30
-  {&DDRA, &PINA, &PORTA, 3},  // A3 31
-  {&DDRA, &PINA, &PORTA, 4},  // A4 32
-  {&DDRA, &PINA, &PORTA, 5},  // A5 33
-  {&DDRA, &PINA, &PORTA, 6},  // A6 34
-  {&DDRA, &PINA, &PORTA, 7},  // A7 35
-  {&DDRE, &PINE, &PORTE, 4},  // E4 36
-  {&DDRE, &PINE, &PORTE, 5},  // E5 37
-  {&DDRF, &PINF, &PORTF, 0},  // F0 38
-  {&DDRF, &PINF, &PORTF, 1},  // F1 39
-  {&DDRF, &PINF, &PORTF, 2},  // F2 40
-  {&DDRF, &PINF, &PORTF, 3},  // F3 41
-  {&DDRF, &PINF, &PORTF, 4},  // F4 42
-  {&DDRF, &PINF, &PORTF, 5},  // F5 43
-  {&DDRF, &PINF, &PORTF, 6},  // F6 44
-  {&DDRF, &PINF, &PORTF, 7}   // F7 45
-};
-//------------------------------------------------------------------------------
-#elif defined(__AVR_ATmega168__)\
-||defined(__AVR_ATmega168P__)\
-||defined(__AVR_ATmega328P__)
-// 168 and 328 Arduinos
-
-// Two Wire (aka I2C) ports
-uint8_t const SDA_PIN = 18;  // C4
-uint8_t const SCL_PIN = 19;  // C5
-
-// SPI port
-uint8_t const SS_PIN = 10;    // B2
-uint8_t const MOSI_PIN = 11;  // B3
-uint8_t const MISO_PIN = 12;  // B4
-uint8_t const SCK_PIN = 13;   // B5
-
-static const pin_map_t digitalPinMap[] = {
-  {&DDRD, &PIND, &PORTD, 0},  // D0  0
-  {&DDRD, &PIND, &PORTD, 1},  // D1  1
-  {&DDRD, &PIND, &PORTD, 2},  // D2  2
-  {&DDRD, &PIND, &PORTD, 3},  // D3  3
-  {&DDRD, &PIND, &PORTD, 4},  // D4  4
-  {&DDRD, &PIND, &PORTD, 5},  // D5  5
-  {&DDRD, &PIND, &PORTD, 6},  // D6  6
-  {&DDRD, &PIND, &PORTD, 7},  // D7  7
-  {&DDRB, &PINB, &PORTB, 0},  // B0  8
-  {&DDRB, &PINB, &PORTB, 1},  // B1  9
-  {&DDRB, &PINB, &PORTB, 2},  // B2 10
-  {&DDRB, &PINB, &PORTB, 3},  // B3 11
-  {&DDRB, &PINB, &PORTB, 4},  // B4 12
-  {&DDRB, &PINB, &PORTB, 5},  // B5 13
-  {&DDRC, &PINC, &PORTC, 0},  // C0 14
-  {&DDRC, &PINC, &PORTC, 1},  // C1 15
-  {&DDRC, &PINC, &PORTC, 2},  // C2 16
-  {&DDRC, &PINC, &PORTC, 3},  // C3 17
-  {&DDRC, &PINC, &PORTC, 4},  // C4 18
-  {&DDRC, &PINC, &PORTC, 5}   // C5 19
-};
-#else  // defined(__AVR_ATmega1280__)
-#error unknown chip
-#endif  // defined(__AVR_ATmega1280__)
-//------------------------------------------------------------------------------
-static const uint8_t digitalPinCount = sizeof(digitalPinMap)/sizeof(pin_map_t);
-
-uint8_t badPinNumber(void)
-  __attribute__((error("Pin number is too large or not a constant")));
-
-static inline __attribute__((always_inline))
-  bool getPinMode(uint8_t pin) {
-  if (__builtin_constant_p(pin) && pin < digitalPinCount) {
-    return (*digitalPinMap[pin].ddr >> digitalPinMap[pin].bit) & 1;
-  } else {
-    return badPinNumber();
-  }
-}
-static inline __attribute__((always_inline))
-  void setPinMode(uint8_t pin, uint8_t mode) {
-  if (__builtin_constant_p(pin) && pin < digitalPinCount) {
-    if (mode) {
-      *digitalPinMap[pin].ddr |= 1 << digitalPinMap[pin].bit;
-    } else {
-      *digitalPinMap[pin].ddr &= ~(1 << digitalPinMap[pin].bit);
-    }
-  } else {
-    badPinNumber();
-  }
-}
-static inline __attribute__((always_inline))
-  bool fastDigitalRead(uint8_t pin) {
-  if (__builtin_constant_p(pin) && pin < digitalPinCount) {
-    return (*digitalPinMap[pin].pin >> digitalPinMap[pin].bit) & 1;
-  } else {
-    return badPinNumber();
-  }
-}
-static inline __attribute__((always_inline))
-  void fastDigitalWrite(uint8_t pin, uint8_t value) {
-  if (__builtin_constant_p(pin) && pin < digitalPinCount) {
-    if (value) {
-      *digitalPinMap[pin].port |= 1 << digitalPinMap[pin].bit;
-    } else {
-      *digitalPinMap[pin].port &= ~(1 << digitalPinMap[pin].bit);
-    }
-  } else {
-    badPinNumber();
-  }
-}
-#endif  // Sd2PinMap_h
-
-
-#endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/SdBaseFile.h

@@ -1,24 +1,33 @@
-/* Arduino SdFat Library
- * Copyright (C) 2009 by William Greiman
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
- * This file is part of the Arduino SdFat Library
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  *
- * This Library is free software: you can redistribute it and/or modify
+ * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
  * (at your option) any later version.
  *
- * This Library is distributed in the hope that it will be useful,
+ * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with the Arduino SdFat Library.  If not, see
- * <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino SdFat Library
+ * Copyright (C) 2009 by William Greiman
+ *
+ * This file is part of the Arduino Sd2Card Library
  */
 #include "Marlin.h"
-#ifdef SDSUPPORT
+#if ENABLED(SDSUPPORT)
 
 #ifndef SdBaseFile_h
 #define SdBaseFile_h
@@ -45,11 +54,11 @@ struct filepos_t {
 
 // use the gnu style oflag in open()
 /** open() oflag for reading */
-uint8_t const O_READ = 0X01;
+uint8_t const O_READ = 0x01;
 /** open() oflag - same as O_IN */
 uint8_t const O_RDONLY = O_READ;
 /** open() oflag for write */
-uint8_t const O_WRITE = 0X02;
+uint8_t const O_WRITE = 0x02;
 /** open() oflag - same as O_WRITE */
 uint8_t const O_WRONLY = O_WRITE;
 /** open() oflag for reading and writing */
@@ -57,17 +66,17 @@ uint8_t const O_RDWR = (O_READ | O_WRITE);
 /** open() oflag mask for access modes */
 uint8_t const O_ACCMODE = (O_READ | O_WRITE);
 /** The file offset shall be set to the end of the file prior to each write. */
-uint8_t const O_APPEND = 0X04;
+uint8_t const O_APPEND = 0x04;
 /** synchronous writes - call sync() after each write */
-uint8_t const O_SYNC = 0X08;
+uint8_t const O_SYNC = 0x08;
 /** truncate the file to zero length */
-uint8_t const O_TRUNC = 0X10;
+uint8_t const O_TRUNC = 0x10;
 /** set the initial position at the end of the file */
-uint8_t const O_AT_END = 0X20;
+uint8_t const O_AT_END = 0x20;
 /** create the file if nonexistent */
-uint8_t const O_CREAT = 0X40;
+uint8_t const O_CREAT = 0x40;
 /** If O_CREAT and O_EXCL are set, open() shall fail if the file exists */
-uint8_t const O_EXCL = 0X80;
+uint8_t const O_EXCL = 0x80;
 
 // SdBaseFile class static and const definitions
 // flags for ls()
@@ -132,7 +141,7 @@ static inline uint8_t FAT_MONTH(uint16_t fatDate) {
  * \return Extracted day [1,31]
  */
 static inline uint8_t FAT_DAY(uint16_t fatDate) {
-  return fatDate & 0X1F;
+  return fatDate & 0x1F;
 }
 /** time field for FAT directory entry
  * \param[in] hour [0,23]
@@ -158,7 +167,7 @@ static inline uint8_t FAT_HOUR(uint16_t fatTime) {
  * \return Extracted minute [0,59]
  */
 static inline uint8_t FAT_MINUTE(uint16_t fatTime) {
-  return(fatTime >> 5) & 0X3F;
+  return (fatTime >> 5) & 0x3F;
 }
 /** second part of FAT directory time field
  * Note second/2 is stored in packed time.
@@ -168,7 +177,7 @@ static inline uint8_t FAT_MINUTE(uint16_t fatTime) {
  * \return Extracted second [0,58]
  */
 static inline uint8_t FAT_SECOND(uint16_t fatTime) {
-  return 2*(fatTime & 0X1F);
+  return 2 * (fatTime & 0x1F);
 }
 /** Default date for file timestamps is 1 Jan 2000 */
 uint16_t const FAT_DEFAULT_DATE = ((2000 - 1980) << 9) | (1 << 5) | 1;
@@ -184,7 +193,7 @@ class SdBaseFile {
   /** Create an instance. */
   SdBaseFile() : writeError(false), type_(FAT_FILE_TYPE_CLOSED) {}
   SdBaseFile(const char* path, uint8_t oflag);
-  ~SdBaseFile() {if(isOpen()) close();}
+  ~SdBaseFile() {if (isOpen()) close();}
   /**
    * writeError is set to true if an error occurs during a write().
    * Set writeError to false before calling print() and/or write() and check
@@ -205,7 +214,7 @@ class SdBaseFile {
   bool close();
   bool contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock);
   bool createContiguous(SdBaseFile* dirFile,
-          const char* path, uint32_t size);
+                        const char* path, uint32_t size);
   /** \return The current cluster number for a file or directory. */
   uint32_t curCluster() const {return curCluster_;}
   /** \return The current position for a file or directory. */
@@ -266,7 +275,7 @@ class SdBaseFile {
   bool isRoot() const {
     return type_ == FAT_FILE_TYPE_ROOT_FIXED || type_ == FAT_FILE_TYPE_ROOT32;
   }
-  void ls( uint8_t flags = 0, uint8_t indent = 0);
+  void ls(uint8_t flags = 0, uint8_t indent = 0);
   bool mkdir(SdBaseFile* dir, const char* path, bool pFlag = true);
   // alias for backward compactability
   bool makeDir(SdBaseFile* dir, const char* path) {
@@ -279,7 +288,7 @@ class SdBaseFile {
   bool openRoot(SdVolume* vol);
   int peek();
   static void printFatDate(uint16_t fatDate);
-  static void printFatTime( uint16_t fatTime);
+  static void printFatTime(uint16_t fatTime);
   bool printName();
   int16_t read();
   int16_t read(void* buf, uint16_t nbyte);
@@ -309,7 +318,7 @@ class SdBaseFile {
   bool sync();
   bool timestamp(SdBaseFile* file);
   bool timestamp(uint8_t flag, uint16_t year, uint8_t month, uint8_t day,
-          uint8_t hour, uint8_t minute, uint8_t second);
+                 uint8_t hour, uint8_t minute, uint8_t second);
   /** Type of file.  You should use isFile() or isDir() instead of type()
    * if possible.
    *
@@ -320,7 +329,7 @@ class SdBaseFile {
   /** \return SdVolume that contains this file. */
   SdVolume* volume() const {return vol_;}
   int16_t write(const void* buf, uint16_t nbyte);
-//------------------------------------------------------------------------------
+  //------------------------------------------------------------------------------
  private:
   // allow SdFat to set cwd_
   friend class SdFat;
@@ -329,10 +338,10 @@ class SdBaseFile {
   // data time callback function
   static void (*dateTime_)(uint16_t* date, uint16_t* time);
   // bits defined in flags_
-  // should be 0X0F
+  // should be 0x0F
   static uint8_t const F_OFLAG = (O_ACCMODE | O_APPEND | O_SYNC);
   // sync of directory entry required
-  static uint8_t const F_FILE_DIR_DIRTY = 0X80;
+  static uint8_t const F_FILE_DIR_DIRTY = 0x80;
 
   // private data
   uint8_t   flags_;         // See above for definition of flags_ bits
@@ -352,18 +361,18 @@ class SdBaseFile {
   bool addCluster();
   bool addDirCluster();
   dir_t* cacheDirEntry(uint8_t action);
-  int8_t lsPrintNext( uint8_t flags, uint8_t indent);
+  int8_t lsPrintNext(uint8_t flags, uint8_t indent);
   static bool make83Name(const char* str, uint8_t* name, const char** ptr);
   bool mkdir(SdBaseFile* parent, const uint8_t dname[11]);
   bool open(SdBaseFile* dirFile, const uint8_t dname[11], uint8_t oflag);
   bool openCachedEntry(uint8_t cacheIndex, uint8_t oflags);
   dir_t* readDirCache();
-//------------------------------------------------------------------------------
-// to be deleted
-  static void printDirName( const dir_t& dir,
-    uint8_t width, bool printSlash);
-//------------------------------------------------------------------------------
-// Deprecated functions  - suppress cpplint warnings with NOLINT comment
+  //------------------------------------------------------------------------------
+  // to be deleted
+  static void printDirName(const dir_t& dir,
+                           uint8_t width, bool printSlash);
+  //------------------------------------------------------------------------------
+  // Deprecated functions  - suppress cpplint warnings with NOLINT comment
 #if ALLOW_DEPRECATED_FUNCTIONS && !defined(DOXYGEN)
  public:
   /** \deprecated Use:
@@ -375,16 +384,16 @@ class SdBaseFile {
   bool contiguousRange(uint32_t& bgnBlock, uint32_t& endBlock) {  // NOLINT
     return contiguousRange(&bgnBlock, &endBlock);
   }
- /** \deprecated Use:
-   * bool createContiguous(SdBaseFile* dirFile,
-   *   const char* path, uint32_t size)
-   * \param[in] dirFile The directory where the file will be created.
-   * \param[in] path A path with a valid DOS 8.3 file name.
-   * \param[in] size The desired file size.
-   * \return true for success or false for failure.
-   */
+  /** \deprecated Use:
+    * bool createContiguous(SdBaseFile* dirFile,
+    *   const char* path, uint32_t size)
+    * \param[in] dirFile The directory where the file will be created.
+    * \param[in] path A path with a valid DOS 8.3 file name.
+    * \param[in] size The desired file size.
+    * \return true for success or false for failure.
+    */
   bool createContiguous(SdBaseFile& dirFile,  // NOLINT
-    const char* path, uint32_t size) {
+                        const char* path, uint32_t size) {
     return createContiguous(&dirFile, path, size);
   }
   /** \deprecated Use:
@@ -393,7 +402,7 @@ class SdBaseFile {
    * \param[in] dateTime The user's call back function.
    */
   static void dateTimeCallback(
-    void (*dateTime)(uint16_t& date, uint16_t& time)) {  // NOLINT
+    void (*dateTime)(uint16_t &date, uint16_t &time)) {  // NOLINT
     oldDateTime_ = dateTime;
     dateTime_ = dateTime ? oldToNew : 0;
   }
@@ -422,7 +431,7 @@ class SdBaseFile {
    * \return true for success or false for failure.
    */
   bool open(SdBaseFile& dirFile, // NOLINT
-    const char* path, uint8_t oflag) {
+            const char* path, uint8_t oflag) {
     return open(&dirFile, path, oflag);
   }
   /** \deprecated  Do not use in new apps
@@ -465,10 +474,10 @@ class SdBaseFile {
   static bool remove(SdBaseFile& dirFile, const char* path) {  // NOLINT
     return remove(&dirFile, path);
   }
-//------------------------------------------------------------------------------
-// rest are private
+  //------------------------------------------------------------------------------
+  // rest are private
  private:
-  static void (*oldDateTime_)(uint16_t& date, uint16_t& time);  // NOLINT
+  static void (*oldDateTime_)(uint16_t &date, uint16_t &time);  // NOLINT
   static void oldToNew(uint16_t* date, uint16_t* time) {
     uint16_t d;
     uint16_t t;

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/SdFatConfig.h

@@ -1,120 +1,133 @@
-/* Arduino SdFat Library
- * Copyright (C) 2009 by William Greiman
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
- * This file is part of the Arduino SdFat Library
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  *
- * This Library is free software: you can redistribute it and/or modify
+ * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
  * (at your option) any later version.
  *
- * This Library is distributed in the hope that it will be useful,
+ * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with the Arduino SdFat Library.  If not, see
- * <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino SdFat Library
+ * Copyright (C) 2009 by William Greiman
+ *
+ * This file is part of the Arduino Sd2Card Library
  */
 /**
  * \file
  * \brief configuration definitions
  */
 #include "Marlin.h"
-#ifdef SDSUPPORT
+#if ENABLED(SDSUPPORT)
 
 #ifndef SdFatConfig_h
-#define SdFatConfig_h
-#include <stdint.h>
-//------------------------------------------------------------------------------
-/**
- * To use multiple SD cards set USE_MULTIPLE_CARDS nonzero.
- *
- * Using multiple cards costs 400 - 500  bytes of flash.
- *
- * Each card requires about 550 bytes of SRAM so use of a Mega is recommended.
- */
-#define USE_MULTIPLE_CARDS 0
-//------------------------------------------------------------------------------
-/**
- * Call flush for endl if ENDL_CALLS_FLUSH is nonzero
- *
- * The standard for iostreams is to call flush.  This is very costly for
- * SdFat.  Each call to flush causes 2048 bytes of I/O to the SD.
- *
- * SdFat has a single 512 byte buffer for SD I/O so it must write the current
- * data block to the SD, read the directory block from the SD, update the
- * directory entry, write the directory block to the SD and read the data
- * block back into the buffer.
- *
- * The SD flash memory controller is not designed for this many rewrites
- * so performance may be reduced by more than a factor of 100.
- *
- * If ENDL_CALLS_FLUSH is zero, you must call flush and/or close to force
- * all data to be written to the SD.
- */
-#define ENDL_CALLS_FLUSH 0
-//------------------------------------------------------------------------------
-/**
- * Allow use of deprecated functions if ALLOW_DEPRECATED_FUNCTIONS is nonzero
- */
-#define ALLOW_DEPRECATED_FUNCTIONS 1
-//------------------------------------------------------------------------------
-/**
- * Allow FAT12 volumes if FAT12_SUPPORT is nonzero.
- * FAT12 has not been well tested.
- */
-#define FAT12_SUPPORT 0
-//------------------------------------------------------------------------------
-/**
- * SPI init rate for SD initialization commands. Must be 5 (F_CPU/64)
- * or 6 (F_CPU/128).
- */
-#define SPI_SD_INIT_RATE 5
-//------------------------------------------------------------------------------
-/**
- * Set the SS pin high for hardware SPI.  If SS is chip select for another SPI
- * device this will disable that device during the SD init phase.
- */
-#define SET_SPI_SS_HIGH 1
-//------------------------------------------------------------------------------
-/**
- * Define MEGA_SOFT_SPI nonzero to use software SPI on Mega Arduinos.
- * Pins used are SS 10, MOSI 11, MISO 12, and SCK 13.
- *
- * MEGA_SOFT_SPI allows an unmodified Adafruit GPS Shield to be used
- * on Mega Arduinos.  Software SPI works well with GPS Shield V1.1
- * but many SD cards will fail with GPS Shield V1.0.
- */
-#define MEGA_SOFT_SPI 0
-//------------------------------------------------------------------------------
-/**
- * Set USE_SOFTWARE_SPI nonzero to always use software SPI.
- */
-#define USE_SOFTWARE_SPI 0
-// define software SPI pins so Mega can use unmodified 168/328 shields
-/** Software SPI chip select pin for the SD */
-uint8_t const SOFT_SPI_CS_PIN = 10;
-/** Software SPI Master Out Slave In pin */
-uint8_t const SOFT_SPI_MOSI_PIN = 11;
-/** Software SPI Master In Slave Out pin */
-uint8_t const SOFT_SPI_MISO_PIN = 12;
-/** Software SPI Clock pin */
-uint8_t const SOFT_SPI_SCK_PIN = 13;
-//------------------------------------------------------------------------------
-/**
- * The __cxa_pure_virtual function is an error handler that is invoked when
- * a pure virtual function is called.
- */
-#define USE_CXA_PURE_VIRTUAL 1
-/**
- * Defines for long (vfat) filenames
- */
-/** Number of VFAT entries used. Every entry has 13 UTF-16 characters */
-#define MAX_VFAT_ENTRIES (2)
-/** Total size of the buffer used to store the long filenames */
-#define LONG_FILENAME_LENGTH (13*MAX_VFAT_ENTRIES+1)
+  #define SdFatConfig_h
+  #include <stdint.h>
+  //------------------------------------------------------------------------------
+  /**
+  * To use multiple SD cards set USE_MULTIPLE_CARDS nonzero.
+  *
+  * Using multiple cards costs 400 - 500  bytes of flash.
+  *
+  * Each card requires about 550 bytes of SRAM so use of a Mega is recommended.
+  */
+  #define USE_MULTIPLE_CARDS 0
+  //------------------------------------------------------------------------------
+  /**
+  * Call flush for endl if ENDL_CALLS_FLUSH is nonzero
+  *
+  * The standard for iostreams is to call flush.  This is very costly for
+  * SdFat.  Each call to flush causes 2048 bytes of I/O to the SD.
+  *
+  * SdFat has a single 512 byte buffer for SD I/O so it must write the current
+  * data block to the SD, read the directory block from the SD, update the
+  * directory entry, write the directory block to the SD and read the data
+  * block back into the buffer.
+  *
+  * The SD flash memory controller is not designed for this many rewrites
+  * so performance may be reduced by more than a factor of 100.
+  *
+  * If ENDL_CALLS_FLUSH is zero, you must call flush and/or close to force
+  * all data to be written to the SD.
+  */
+  #define ENDL_CALLS_FLUSH 0
+  //------------------------------------------------------------------------------
+  /**
+  * Allow use of deprecated functions if ALLOW_DEPRECATED_FUNCTIONS is nonzero
+  */
+  #define ALLOW_DEPRECATED_FUNCTIONS 1
+  //------------------------------------------------------------------------------
+  /**
+  * Allow FAT12 volumes if FAT12_SUPPORT is nonzero.
+  * FAT12 has not been well tested.
+  */
+  #define FAT12_SUPPORT 0
+  //------------------------------------------------------------------------------
+  /**
+  * SPI init rate for SD initialization commands. Must be 5 (F_CPU/64)
+  * or 6 (F_CPU/128).
+  */
+  #define SPI_SD_INIT_RATE 5
+  //------------------------------------------------------------------------------
+  /**
+  * Set the SS pin high for hardware SPI.  If SS is chip select for another SPI
+  * device this will disable that device during the SD init phase.
+  */
+  #define SET_SPI_SS_HIGH 1
+  //------------------------------------------------------------------------------
+  /**
+  * Define MEGA_SOFT_SPI nonzero to use software SPI on Mega Arduinos.
+  * Pins used are SS 10, MOSI 11, MISO 12, and SCK 13.
+  *
+  * MEGA_SOFT_SPI allows an unmodified Adafruit GPS Shield to be used
+  * on Mega Arduinos.  Software SPI works well with GPS Shield V1.1
+  * but many SD cards will fail with GPS Shield V1.0.
+  */
+  #define MEGA_SOFT_SPI 0
+  //------------------------------------------------------------------------------
+  /**
+  * Set USE_SOFTWARE_SPI nonzero to always use software SPI.
+  */
+  #define USE_SOFTWARE_SPI 0
+  // define software SPI pins so Mega can use unmodified 168/328 shields
+  /** Software SPI chip select pin for the SD */
+  #define SOFT_SPI_CS_PIN 10
+  /** Software SPI Master Out Slave In pin */
+  #define SOFT_SPI_MOSI_PIN 11
+  /** Software SPI Master In Slave Out pin */
+  #define SOFT_SPI_MISO_PIN 12
+  /** Software SPI Clock pin */
+  #define SOFT_SPI_SCK_PIN 13
+  //------------------------------------------------------------------------------
+  /**
+  * The __cxa_pure_virtual function is an error handler that is invoked when
+  * a pure virtual function is called.
+  */
+  #define USE_CXA_PURE_VIRTUAL 1
+
+  /** Number of UTF-16 characters per entry */
+  #define FILENAME_LENGTH 13
+
+  /**
+  * Defines for long (vfat) filenames
+  */
+  /** Number of VFAT entries used. Every entry has 13 UTF-16 characters */
+  #define MAX_VFAT_ENTRIES (2)
+  /** Total size of the buffer used to store the long filenames */
+  #define LONG_FILENAME_LENGTH (FILENAME_LENGTH*MAX_VFAT_ENTRIES+1)
 #endif  // SdFatConfig_h
 
 

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/SdFatStructs.h

@@ -1,24 +1,33 @@
-/* Arduino SdFat Library
- * Copyright (C) 2009 by William Greiman
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
- * This file is part of the Arduino SdFat Library
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  *
- * This Library is free software: you can redistribute it and/or modify
+ * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
  * (at your option) any later version.
  *
- * This Library is distributed in the hope that it will be useful,
+ * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with the Arduino SdFat Library.  If not, see
- * <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino SdFat Library
+ * Copyright (C) 2009 by William Greiman
+ *
+ * This file is part of the Arduino Sd2Card Library
  */
 #include "Marlin.h"
-#ifdef SDSUPPORT
+#if ENABLED(SDSUPPORT)
 
 #ifndef SdFatStructs_h
 #define SdFatStructs_h
@@ -28,17 +37,17 @@
  * \file
  * \brief FAT file structures
  */
-/*
+/**
  * mostly from Microsoft document fatgen103.doc
  * http://www.microsoft.com/whdc/system/platform/firmware/fatgen.mspx
  */
 //------------------------------------------------------------------------------
 /** Value for byte 510 of boot block or MBR */
-uint8_t const BOOTSIG0 = 0X55;
+uint8_t const BOOTSIG0 = 0x55;
 /** Value for byte 511 of boot block or MBR */
-uint8_t const BOOTSIG1 = 0XAA;
+uint8_t const BOOTSIG1 = 0xAA;
 /** Value for bootSignature field int FAT/FAT32 boot sector */
-uint8_t const EXTENDED_BOOT_SIG = 0X29;
+uint8_t const EXTENDED_BOOT_SIG = 0x29;
 //------------------------------------------------------------------------------
 /**
  * \struct partitionTable
@@ -50,14 +59,14 @@ uint8_t const EXTENDED_BOOT_SIG = 0X29;
 struct partitionTable {
           /**
            * Boot Indicator . Indicates whether the volume is the active
-           * partition.  Legal values include: 0X00. Do not use for booting.
-           * 0X80 Active partition.
+           * partition.  Legal values include: 0x00. Do not use for booting.
+           * 0x80 Active partition.
            */
   uint8_t  boot;
           /**
-            * Head part of Cylinder-head-sector address of the first block in
-            * the partition. Legal values are 0-255. Only used in old PC BIOS.
-            */
+           * Head part of Cylinder-head-sector address of the first block in
+           * the partition. Legal values are 0-255. Only used in old PC BIOS.
+           */
   uint8_t  beginHead;
           /**
            * Sector part of Cylinder-head-sector address of the first block in
@@ -117,9 +126,9 @@ struct masterBootRecord {
   uint16_t usuallyZero;
            /** Partition tables. */
   part_t   part[4];
-           /** First MBR signature byte. Must be 0X55 */
+           /** First MBR signature byte. Must be 0x55 */
   uint8_t  mbrSig0;
-           /** Second MBR signature byte. Must be 0XAA */
+           /** Second MBR signature byte. Must be 0xAA */
   uint8_t  mbrSig1;
 } PACKED;
 /** Type name for masterBootRecord */
@@ -225,7 +234,7 @@ struct fat_boot {
   uint8_t  driveNumber;
            /** used by Windows NT - should be zero for FAT */
   uint8_t  reserved1;
-           /** 0X29 if next three fields are valid */
+           /** 0x29 if next three fields are valid */
   uint8_t  bootSignature;
            /**
             * A random serial number created when formatting a disk,
@@ -245,9 +254,9 @@ struct fat_boot {
   char     fileSystemType[8];
            /** X86 boot code */
   uint8_t  bootCode[448];
-           /** must be 0X55 */
+           /** must be 0x55 */
   uint8_t  bootSectorSig0;
-           /** must be 0XAA */
+           /** must be 0xAA */
   uint8_t  bootSectorSig1;
 } PACKED;
 /** Type name for FAT Boot Sector */
@@ -337,10 +346,10 @@ struct fat32_boot {
            * Bits 0-3 -- Zero-based number of active FAT.
            *             Only valid if mirroring is disabled.
            * Bits 4-6 -- Reserved.
-           * Bit 7	-- 0 means the FAT is mirrored at runtime into all FATs.
-	         *        -- 1 means only one FAT is active; it is the one referenced
-	         *             in bits 0-3.
-           * Bits 8-15 	-- Reserved.
+           * Bit 7  -- 0 means the FAT is mirrored at runtime into all FATs.
+           *        -- 1 means only one FAT is active; it is the one referenced
+           *             in bits 0-3.
+           * Bits 8-15  -- Reserved.
            */
   uint16_t fat32Flags;
           /**
@@ -380,7 +389,7 @@ struct fat32_boot {
   uint8_t  driveNumber;
            /** used by Windows NT - should be zero for FAT */
   uint8_t  reserved1;
-           /** 0X29 if next three fields are valid */
+           /** 0x29 if next three fields are valid */
   uint8_t  bootSignature;
            /**
             * A random serial number created when formatting a disk,
@@ -399,9 +408,9 @@ struct fat32_boot {
   char     fileSystemType[8];
            /** X86 boot code */
   uint8_t  bootCode[420];
-           /** must be 0X55 */
+           /** must be 0x55 */
   uint8_t  bootSectorSig0;
-           /** must be 0XAA */
+           /** must be 0xAA */
   uint8_t  bootSectorSig1;
 } PACKED;
 /** Type name for FAT32 Boot Sector */
@@ -418,11 +427,11 @@ uint32_t const FSINFO_STRUCT_SIG = 0x61417272;
  *
  */
 struct fat32_fsinfo {
-           /** must be 0X52, 0X52, 0X61, 0X41 */
+           /** must be 0x52, 0x52, 0x61, 0x41 */
   uint32_t  leadSignature;
            /** must be zero */
   uint8_t  reserved1[480];
-           /** must be 0X72, 0X72, 0X41, 0X61 */
+           /** must be 0x72, 0x72, 0x41, 0x61 */
   uint32_t  structSignature;
           /**
            * Contains the last known free cluster count on the volume.
@@ -441,7 +450,7 @@ struct fat32_fsinfo {
   uint32_t nextFree;
            /** must be zero */
   uint8_t  reserved2[12];
-           /** must be 0X00, 0X00, 0X55, 0XAA */
+           /** must be 0x00, 0x00, 0x55, 0xAA */
   uint8_t  tailSignature[4];
 } PACKED;
 /** Type name for FAT32 FSINFO Sector */
@@ -449,48 +458,48 @@ typedef struct fat32_fsinfo fat32_fsinfo_t;
 //------------------------------------------------------------------------------
 // End Of Chain values for FAT entries
 /** FAT12 end of chain value used by Microsoft. */
-uint16_t const FAT12EOC = 0XFFF;
+uint16_t const FAT12EOC = 0xFFF;
 /** Minimum value for FAT12 EOC.  Use to test for EOC. */
-uint16_t const FAT12EOC_MIN = 0XFF8;
+uint16_t const FAT12EOC_MIN = 0xFF8;
 /** FAT16 end of chain value used by Microsoft. */
-uint16_t const FAT16EOC = 0XFFFF;
+uint16_t const FAT16EOC = 0xFFFF;
 /** Minimum value for FAT16 EOC.  Use to test for EOC. */
-uint16_t const FAT16EOC_MIN = 0XFFF8;
+uint16_t const FAT16EOC_MIN = 0xFFF8;
 /** FAT32 end of chain value used by Microsoft. */
-uint32_t const FAT32EOC = 0X0FFFFFFF;
+uint32_t const FAT32EOC = 0x0FFFFFFF;
 /** Minimum value for FAT32 EOC.  Use to test for EOC. */
-uint32_t const FAT32EOC_MIN = 0X0FFFFFF8;
+uint32_t const FAT32EOC_MIN = 0x0FFFFFF8;
 /** Mask a for FAT32 entry. Entries are 28 bits. */
-uint32_t const FAT32MASK = 0X0FFFFFFF;
+uint32_t const FAT32MASK = 0x0FFFFFFF;
 //------------------------------------------------------------------------------
 /**
  * \struct directoryEntry
  * \brief FAT short directory entry
  *
  * Short means short 8.3 name, not the entry size.
- *  
- * Date Format. A FAT directory entry date stamp is a 16-bit field that is 
+ *
+ * Date Format. A FAT directory entry date stamp is a 16-bit field that is
  * basically a date relative to the MS-DOS epoch of 01/01/1980. Here is the
- * format (bit 0 is the LSB of the 16-bit word, bit 15 is the MSB of the 
+ * format (bit 0 is the LSB of the 16-bit word, bit 15 is the MSB of the
  * 16-bit word):
- *   
- * Bits 9-15: Count of years from 1980, valid value range 0-127 
+ *
+ * Bits 9-15: Count of years from 1980, valid value range 0-127
  * inclusive (1980-2107).
- *   
+ *
  * Bits 5-8: Month of year, 1 = January, valid value range 1-12 inclusive.
  *
  * Bits 0-4: Day of month, valid value range 1-31 inclusive.
  *
  * Time Format. A FAT directory entry time stamp is a 16-bit field that has
- * a granularity of 2 seconds. Here is the format (bit 0 is the LSB of the 
+ * a granularity of 2 seconds. Here is the format (bit 0 is the LSB of the
  * 16-bit word, bit 15 is the MSB of the 16-bit word).
- *   
+ *
  * Bits 11-15: Hours, valid value range 0-23 inclusive.
- * 
+ *
  * Bits 5-10: Minutes, valid value range 0-59 inclusive.
- *      
+ *
  * Bits 0-4: 2-second count, valid value range 0-29 inclusive (0 - 58 seconds).
- *   
+ *
  * The valid time range is from Midnight 00:00:00 to 23:59:58.
  */
 struct directoryEntry {
@@ -514,7 +523,7 @@ struct directoryEntry {
   uint8_t  reservedNT;
           /**
            * The granularity of the seconds part of creationTime is 2 seconds
-           * so this field is a count of tenths of a second and its valid
+           * so this field is a count of tenths of a second and it's valid
            * value range is 0-199 inclusive. (WHG note - seems to be hundredths)
            */
   uint8_t  creationTimeTenths;
@@ -548,7 +557,7 @@ struct directoryEntry {
  *
  * directoryVFATEntries are found in the same list as normal directoryEntry.
  * But have the attribute field set to DIR_ATT_LONG_NAME.
- * 
+ *
  * Long filenames are saved in multiple directoryVFATEntries.
  * Each entry containing 13 UTF-16 characters.
  */
@@ -581,31 +590,31 @@ struct directoryVFATEntry {
 typedef struct directoryEntry dir_t;
 /** Type name for directoryVFATEntry */
 typedef struct directoryVFATEntry vfat_t;
-/** escape for name[0] = 0XE5 */
-uint8_t const DIR_NAME_0XE5 = 0X05;
+/** escape for name[0] = 0xE5 */
+uint8_t const DIR_NAME_0xE5 = 0x05;
 /** name[0] value for entry that is free after being "deleted" */
-uint8_t const DIR_NAME_DELETED = 0XE5;
+uint8_t const DIR_NAME_DELETED = 0xE5;
 /** name[0] value for entry that is free and no allocated entries follow */
-uint8_t const DIR_NAME_FREE = 0X00;
+uint8_t const DIR_NAME_FREE = 0x00;
 /** file is read-only */
-uint8_t const DIR_ATT_READ_ONLY = 0X01;
+uint8_t const DIR_ATT_READ_ONLY = 0x01;
 /** File should hidden in directory listings */
-uint8_t const DIR_ATT_HIDDEN = 0X02;
+uint8_t const DIR_ATT_HIDDEN = 0x02;
 /** Entry is for a system file */
-uint8_t const DIR_ATT_SYSTEM = 0X04;
+uint8_t const DIR_ATT_SYSTEM = 0x04;
 /** Directory entry contains the volume label */
-uint8_t const DIR_ATT_VOLUME_ID = 0X08;
+uint8_t const DIR_ATT_VOLUME_ID = 0x08;
 /** Entry is for a directory */
-uint8_t const DIR_ATT_DIRECTORY = 0X10;
+uint8_t const DIR_ATT_DIRECTORY = 0x10;
 /** Old DOS archive bit for backup support */
-uint8_t const DIR_ATT_ARCHIVE = 0X20;
+uint8_t const DIR_ATT_ARCHIVE = 0x20;
 /** Test value for long name entry.  Test is
   (d->attributes & DIR_ATT_LONG_NAME_MASK) == DIR_ATT_LONG_NAME. */
-uint8_t const DIR_ATT_LONG_NAME = 0X0F;
+uint8_t const DIR_ATT_LONG_NAME = 0x0F;
 /** Test mask for long name entry */
-uint8_t const DIR_ATT_LONG_NAME_MASK = 0X3F;
+uint8_t const DIR_ATT_LONG_NAME_MASK = 0x3F;
 /** defined attribute bits */
-uint8_t const DIR_ATT_DEFINED_BITS = 0X3F;
+uint8_t const DIR_ATT_DEFINED_BITS = 0x3F;
 /** Directory entry is part of a long name
  * \param[in] dir Pointer to a directory entry.
  *

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/SdFatUtil.cpp

@@ -1,53 +1,65 @@
-/* Arduino SdFat Library
- * Copyright (C) 2008 by William Greiman
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
- * This file is part of the Arduino SdFat Library
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  *
- * This Library is free software: you can redistribute it and/or modify
+ * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
  * (at your option) any later version.
  *
- * This Library is distributed in the hope that it will be useful,
+ * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
-
+ *
  * You should have received a copy of the GNU General Public License
- * along with the Arduino SdFat Library.  If not, see
- * <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino SdFat Library
+ * Copyright (C) 2008 by William Greiman
+ *
+ * This file is part of the Arduino Sd2Card Library
  */
 #include "Marlin.h"
 
-#ifdef SDSUPPORT
+#if ENABLED(SDSUPPORT)
 #include "SdFatUtil.h"
 
 //------------------------------------------------------------------------------
 /** Amount of free RAM
  * \return The number of free bytes.
  */
+#ifdef __arm__
+extern "C" char* sbrk(int incr);
 int SdFatUtil::FreeRam() {
-  extern int  __bss_end;
-  extern int* __brkval;
-  int free_memory;
-  if (reinterpret_cast<int>(__brkval) == 0) {
-    // if no heap use from end of bss section
-    free_memory = reinterpret_cast<int>(&free_memory)
-                  - reinterpret_cast<int>(&__bss_end);
-  } else {
-    // use from top of stack to heap
-    free_memory = reinterpret_cast<int>(&free_memory)
-                  - reinterpret_cast<int>(__brkval);
-  }
-  return free_memory;
+  char top;
+  return &top - reinterpret_cast<char*>(sbrk(0));
 }
+#else  // __arm__
+extern char* __brkval;
+extern char __bss_end;
+/** Amount of free RAM
+ * \return The number of free bytes.
+ */
+int SdFatUtil::FreeRam() {
+  char top;
+  return __brkval ? &top - __brkval : &top - &__bss_end;
+}
+#endif  // __arm
+
 //------------------------------------------------------------------------------
 /** %Print a string in flash memory.
  *
  * \param[in] pr Print object for output.
  * \param[in] str Pointer to string stored in flash memory.
  */
-void SdFatUtil::print_P( PGM_P str) {
+void SdFatUtil::print_P(PGM_P str) {
   for (uint8_t c; (c = pgm_read_byte(str)); str++) MYSERIAL.write(c);
 }
 //------------------------------------------------------------------------------
@@ -56,8 +68,8 @@ void SdFatUtil::print_P( PGM_P str) {
  * \param[in] pr Print object for output.
  * \param[in] str Pointer to string stored in flash memory.
  */
-void SdFatUtil::println_P( PGM_P str) {
-  print_P( str);
+void SdFatUtil::println_P(PGM_P str) {
+  print_P(str);
   MYSERIAL.println();
 }
 //------------------------------------------------------------------------------
@@ -74,6 +86,6 @@ void SdFatUtil::SerialPrint_P(PGM_P str) {
  * \param[in] str Pointer to string stored in flash memory.
  */
 void SdFatUtil::SerialPrintln_P(PGM_P str) {
-  println_P( str);
+  println_P(str);
 }
 #endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/SdFatUtil.h

@@ -1,48 +1,56 @@
-/* Arduino SdFat Library
- * Copyright (C) 2008 by William Greiman
- *
- * This file is part of the Arduino SdFat Library
- *
- * This Library is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This Library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License
- * along with the Arduino SdFat Library.  If not, see
- * <http://www.gnu.org/licenses/>.
- */
-#include "Marlin.h"
-#ifdef SDSUPPORT
-
-#ifndef SdFatUtil_h
-#define SdFatUtil_h
-/**
- * \file
- * \brief Useful utility functions.
- */
-#include "Marlin.h"
-#include "MarlinSerial.h"
-/** Store and print a string in flash memory.*/
-#define PgmPrint(x) SerialPrint_P(PSTR(x))
-/** Store and print a string in flash memory followed by a CR/LF.*/
-#define PgmPrintln(x) SerialPrintln_P(PSTR(x))
-
-namespace SdFatUtil {
-  int FreeRam();
-  void print_P( PGM_P str);
-  void println_P( PGM_P str);
-  void SerialPrint_P(PGM_P str);
-  void SerialPrintln_P(PGM_P str);
-}
-
-using namespace SdFatUtil;  // NOLINT
-#endif  // #define SdFatUtil_h
-
-
-#endif
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino SdFat Library
+ * Copyright (C) 2008 by William Greiman
+ *
+ * This file is part of the Arduino Sd2Card Library
+ */
+#ifndef SdFatUtil_h
+#define SdFatUtil_h
+
+#include "Marlin.h"
+#if ENABLED(SDSUPPORT)
+
+/**
+ * \file
+ * \brief Useful utility functions.
+ */
+/** Store and print a string in flash memory.*/
+#define PgmPrint(x) SerialPrint_P(PSTR(x))
+/** Store and print a string in flash memory followed by a CR/LF.*/
+#define PgmPrintln(x) SerialPrintln_P(PSTR(x))
+
+namespace SdFatUtil {
+  int FreeRam();
+  void print_P(PGM_P str);
+  void println_P(PGM_P str);
+  void SerialPrint_P(PGM_P str);
+  void SerialPrintln_P(PGM_P str);
+}
+
+using namespace SdFatUtil;  // NOLINT
+
+#endif // SDSUPPORT
+
+#endif // SdFatUtil_h

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/SdFile.cpp

@@ -1,95 +1,102 @@
-/* Arduino SdFat Library
- * Copyright (C) 2009 by William Greiman
- *
- * This file is part of the Arduino SdFat Library
- *
- * This Library is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This Library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Arduino SdFat Library.  If not, see
- * <http://www.gnu.org/licenses/>.
- */
-#include "Marlin.h"
-
-#ifdef SDSUPPORT
-#include "SdFile.h"
-/**  Create a file object and open it in the current working directory.
- *
- * \param[in] path A path with a valid 8.3 DOS name for a file to be opened.
- *
- * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive
- * OR of open flags. see SdBaseFile::open(SdBaseFile*, const char*, uint8_t).
- */
-SdFile::SdFile(const char* path, uint8_t oflag) : SdBaseFile(path, oflag) {
-}
-//------------------------------------------------------------------------------
-/** Write data to an open file.
- *
- * \note Data is moved to the cache but may not be written to the
- * storage device until sync() is called.
- *
- * \param[in] buf Pointer to the location of the data to be written.
- *
- * \param[in] nbyte Number of bytes to write.
- *
- * \return For success write() returns the number of bytes written, always
- * \a nbyte.  If an error occurs, write() returns -1.  Possible errors
- * include write() is called before a file has been opened, write is called
- * for a read-only file, device is full, a corrupt file system or an I/O error.
- *
- */
-int16_t SdFile::write(const void* buf, uint16_t nbyte) {
-  return SdBaseFile::write(buf, nbyte);
-}
-//------------------------------------------------------------------------------
-/** Write a byte to a file. Required by the Arduino Print class.
- * \param[in] b the byte to be written.
- * Use writeError to check for errors.
- */
-#if ARDUINO >= 100
-size_t SdFile::write(uint8_t b)
-{
-    return SdBaseFile::write(&b, 1);
-}
-#else
-void SdFile::write(uint8_t b)
-{
-    SdBaseFile::write(&b, 1);
-}
-#endif
-//------------------------------------------------------------------------------
-/** Write a string to a file. Used by the Arduino Print class.
- * \param[in] str Pointer to the string.
- * Use writeError to check for errors.
- */
-void SdFile::write(const char* str) {
-  SdBaseFile::write(str, strlen(str));
-}
-//------------------------------------------------------------------------------
-/** Write a PROGMEM string to a file.
- * \param[in] str Pointer to the PROGMEM string.
- * Use writeError to check for errors.
- */
-void SdFile::write_P(PGM_P str) {
-  for (uint8_t c; (c = pgm_read_byte(str)); str++) write(c);
-}
-//------------------------------------------------------------------------------
-/** Write a PROGMEM string followed by CR/LF to a file.
- * \param[in] str Pointer to the PROGMEM string.
- * Use writeError to check for errors.
- */
-void SdFile::writeln_P(PGM_P str) {
-  write_P(str);
-  write_P(PSTR("\r\n"));
-}
-
-
-#endif
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino SdFat Library
+ * Copyright (C) 2009 by William Greiman
+ *
+ * This file is part of the Arduino Sd2Card Library
+ */
+#include "Marlin.h"
+
+#if ENABLED(SDSUPPORT)
+#include "SdFile.h"
+/**  Create a file object and open it in the current working directory.
+ *
+ * \param[in] path A path with a valid 8.3 DOS name for a file to be opened.
+ *
+ * \param[in] oflag Values for \a oflag are constructed by a bitwise-inclusive
+ * OR of open flags. see SdBaseFile::open(SdBaseFile*, const char*, uint8_t).
+ */
+SdFile::SdFile(const char* path, uint8_t oflag) : SdBaseFile(path, oflag) {
+}
+//------------------------------------------------------------------------------
+/** Write data to an open file.
+ *
+ * \note Data is moved to the cache but may not be written to the
+ * storage device until sync() is called.
+ *
+ * \param[in] buf Pointer to the location of the data to be written.
+ *
+ * \param[in] nbyte Number of bytes to write.
+ *
+ * \return For success write() returns the number of bytes written, always
+ * \a nbyte.  If an error occurs, write() returns -1.  Possible errors
+ * include write() is called before a file has been opened, write is called
+ * for a read-only file, device is full, a corrupt file system or an I/O error.
+ *
+ */
+int16_t SdFile::write(const void* buf, uint16_t nbyte) {
+  return SdBaseFile::write(buf, nbyte);
+}
+//------------------------------------------------------------------------------
+/** Write a byte to a file. Required by the Arduino Print class.
+ * \param[in] b the byte to be written.
+ * Use writeError to check for errors.
+ */
+#if ARDUINO >= 100
+  size_t SdFile::write(uint8_t b) {
+    return SdBaseFile::write(&b, 1);
+  }
+#else
+  void SdFile::write(uint8_t b) {
+    SdBaseFile::write(&b, 1);
+  }
+#endif
+//------------------------------------------------------------------------------
+/** Write a string to a file. Used by the Arduino Print class.
+ * \param[in] str Pointer to the string.
+ * Use writeError to check for errors.
+ */
+void SdFile::write(const char* str) {
+  SdBaseFile::write(str, strlen(str));
+}
+//------------------------------------------------------------------------------
+/** Write a PROGMEM string to a file.
+ * \param[in] str Pointer to the PROGMEM string.
+ * Use writeError to check for errors.
+ */
+void SdFile::write_P(PGM_P str) {
+  for (uint8_t c; (c = pgm_read_byte(str)); str++) write(c);
+}
+//------------------------------------------------------------------------------
+/** Write a PROGMEM string followed by CR/LF to a file.
+ * \param[in] str Pointer to the PROGMEM string.
+ * Use writeError to check for errors.
+ */
+void SdFile::writeln_P(PGM_P str) {
+  write_P(str);
+  write_P(PSTR("\r\n"));
+}
+
+
+#endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/SdFile.h

@@ -1,21 +1,30 @@
-/* Arduino SdFat Library
- * Copyright (C) 2009 by William Greiman
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
- * This file is part of the Arduino SdFat Library
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  *
- * This Library is free software: you can redistribute it and/or modify
+ * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
  * (at your option) any later version.
  *
- * This Library is distributed in the hope that it will be useful,
+ * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with the Arduino SdFat Library.  If not, see
- * <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino SdFat Library
+ * Copyright (C) 2009 by William Greiman
+ *
+ * This file is part of the Arduino Sd2Card Library
  */
 /**
  * \file
@@ -23,7 +32,7 @@
  */
 #include "Marlin.h"
 
-#ifdef SDSUPPORT
+#if ENABLED(SDSUPPORT)
 #include "SdBaseFile.h"
 #include <Print.h>
 #ifndef SdFile_h
@@ -38,11 +47,11 @@ class SdFile : public SdBaseFile, public Print {
   SdFile() {}
   SdFile(const char* name, uint8_t oflag);
   #if ARDUINO >= 100
-      size_t write(uint8_t b);
+    size_t write(uint8_t b);
   #else
    void write(uint8_t b);
   #endif
-  
+
   int16_t write(const void* buf, uint16_t nbyte);
   void write(const char* str);
   void write_P(PGM_P str);
@@ -51,4 +60,4 @@ class SdFile : public SdBaseFile, public Print {
 #endif  // SdFile_h
 
 
-#endif
+#endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/SdInfo.h

@@ -1,280 +1,289 @@
-/* Arduino Sd2Card Library
- * Copyright (C) 2009 by William Greiman
- *
- * This file is part of the Arduino Sd2Card Library
- *
- * This Library is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This Library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Arduino Sd2Card Library.  If not, see
- * <http://www.gnu.org/licenses/>.
- */
-#include "Marlin.h"
-#ifdef SDSUPPORT
-
-#ifndef SdInfo_h
-#define SdInfo_h
-#include <stdint.h>
-// Based on the document:
-//
-// SD Specifications
-// Part 1
-// Physical Layer
-// Simplified Specification
-// Version 3.01
-// May 18, 2010
-//
-// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs
-//------------------------------------------------------------------------------
-// SD card commands
-/** GO_IDLE_STATE - init card in spi mode if CS low */
-uint8_t const CMD0 = 0X00;
-/** SEND_IF_COND - verify SD Memory Card interface operating condition.*/
-uint8_t const CMD8 = 0X08;
-/** SEND_CSD - read the Card Specific Data (CSD register) */
-uint8_t const CMD9 = 0X09;
-/** SEND_CID - read the card identification information (CID register) */
-uint8_t const CMD10 = 0X0A;
-/** STOP_TRANSMISSION - end multiple block read sequence */
-uint8_t const CMD12 = 0X0C;
-/** SEND_STATUS - read the card status register */
-uint8_t const CMD13 = 0X0D;
-/** READ_SINGLE_BLOCK - read a single data block from the card */
-uint8_t const CMD17 = 0X11;
-/** READ_MULTIPLE_BLOCK - read a multiple data blocks from the card */
-uint8_t const CMD18 = 0X12;
-/** WRITE_BLOCK - write a single data block to the card */
-uint8_t const CMD24 = 0X18;
-/** WRITE_MULTIPLE_BLOCK - write blocks of data until a STOP_TRANSMISSION */
-uint8_t const CMD25 = 0X19;
-/** ERASE_WR_BLK_START - sets the address of the first block to be erased */
-uint8_t const CMD32 = 0X20;
-/** ERASE_WR_BLK_END - sets the address of the last block of the continuous
-    range to be erased*/
-uint8_t const CMD33 = 0X21;
-/** ERASE - erase all previously selected blocks */
-uint8_t const CMD38 = 0X26;
-/** APP_CMD - escape for application specific command */
-uint8_t const CMD55 = 0X37;
-/** READ_OCR - read the OCR register of a card */
-uint8_t const CMD58 = 0X3A;
-/** SET_WR_BLK_ERASE_COUNT - Set the number of write blocks to be
-     pre-erased before writing */
-uint8_t const ACMD23 = 0X17;
-/** SD_SEND_OP_COMD - Sends host capacity support information and
-    activates the card's initialization process */
-uint8_t const ACMD41 = 0X29;
-//------------------------------------------------------------------------------
-/** status for card in the ready state */
-uint8_t const R1_READY_STATE = 0X00;
-/** status for card in the idle state */
-uint8_t const R1_IDLE_STATE = 0X01;
-/** status bit for illegal command */
-uint8_t const R1_ILLEGAL_COMMAND = 0X04;
-/** start data token for read or write single block*/
-uint8_t const DATA_START_BLOCK = 0XFE;
-/** stop token for write multiple blocks*/
-uint8_t const STOP_TRAN_TOKEN = 0XFD;
-/** start data token for write multiple blocks*/
-uint8_t const WRITE_MULTIPLE_TOKEN = 0XFC;
-/** mask for data response tokens after a write block operation */
-uint8_t const DATA_RES_MASK = 0X1F;
-/** write data accepted token */
-uint8_t const DATA_RES_ACCEPTED = 0X05;
-//------------------------------------------------------------------------------
-/** Card IDentification (CID) register */
-typedef struct CID {
-  // byte 0
-  /** Manufacturer ID */
-  unsigned char mid;
-  // byte 1-2
-  /** OEM/Application ID */
-  char oid[2];
-  // byte 3-7
-  /** Product name */
-  char pnm[5];
-  // byte 8
-  /** Product revision least significant digit */
-  unsigned char prv_m : 4;
-  /** Product revision most significant digit */
-  unsigned char prv_n : 4;
-  // byte 9-12
-  /** Product serial number */
-  uint32_t psn;
-  // byte 13
-  /** Manufacturing date year low digit */
-  unsigned char mdt_year_high : 4;
-  /** not used */
-  unsigned char reserved : 4;
-  // byte 14
-  /** Manufacturing date month */
-  unsigned char mdt_month : 4;
-  /** Manufacturing date year low digit */
-  unsigned char mdt_year_low :4;
-  // byte 15
-  /** not used always 1 */
-  unsigned char always1 : 1;
-  /** CRC7 checksum */
-  unsigned char crc : 7;
-}cid_t;
-//------------------------------------------------------------------------------
-/** CSD for version 1.00 cards */
-typedef struct CSDV1 {
-  // byte 0
-  unsigned char reserved1 : 6;
-  unsigned char csd_ver : 2;
-  // byte 1
-  unsigned char taac;
-  // byte 2
-  unsigned char nsac;
-  // byte 3
-  unsigned char tran_speed;
-  // byte 4
-  unsigned char ccc_high;
-  // byte 5
-  unsigned char read_bl_len : 4;
-  unsigned char ccc_low : 4;
-  // byte 6
-  unsigned char c_size_high : 2;
-  unsigned char reserved2 : 2;
-  unsigned char dsr_imp : 1;
-  unsigned char read_blk_misalign :1;
-  unsigned char write_blk_misalign : 1;
-  unsigned char read_bl_partial : 1;
-  // byte 7
-  unsigned char c_size_mid;
-  // byte 8
-  unsigned char vdd_r_curr_max : 3;
-  unsigned char vdd_r_curr_min : 3;
-  unsigned char c_size_low :2;
-  // byte 9
-  unsigned char c_size_mult_high : 2;
-  unsigned char vdd_w_cur_max : 3;
-  unsigned char vdd_w_curr_min : 3;
-  // byte 10
-  unsigned char sector_size_high : 6;
-  unsigned char erase_blk_en : 1;
-  unsigned char c_size_mult_low : 1;
-  // byte 11
-  unsigned char wp_grp_size : 7;
-  unsigned char sector_size_low : 1;
-  // byte 12
-  unsigned char write_bl_len_high : 2;
-  unsigned char r2w_factor : 3;
-  unsigned char reserved3 : 2;
-  unsigned char wp_grp_enable : 1;
-  // byte 13
-  unsigned char reserved4 : 5;
-  unsigned char write_partial : 1;
-  unsigned char write_bl_len_low : 2;
-  // byte 14
-  unsigned char reserved5: 2;
-  unsigned char file_format : 2;
-  unsigned char tmp_write_protect : 1;
-  unsigned char perm_write_protect : 1;
-  unsigned char copy : 1;
-  /** Indicates the file format on the card */
-  unsigned char file_format_grp : 1;
-  // byte 15
-  unsigned char always1 : 1;
-  unsigned char crc : 7;
-}csd1_t;
-//------------------------------------------------------------------------------
-/** CSD for version 2.00 cards */
-typedef struct CSDV2 {
-  // byte 0
-  unsigned char reserved1 : 6;
-  unsigned char csd_ver : 2;
-  // byte 1
-  /** fixed to 0X0E */
-  unsigned char taac;
-  // byte 2
-  /** fixed to 0 */
-  unsigned char nsac;
-  // byte 3
-  unsigned char tran_speed;
-  // byte 4
-  unsigned char ccc_high;
-  // byte 5
-  /** This field is fixed to 9h, which indicates READ_BL_LEN=512 Byte */
-  unsigned char read_bl_len : 4;
-  unsigned char ccc_low : 4;
-  // byte 6
-  /** not used */
-  unsigned char reserved2 : 4;
-  unsigned char dsr_imp : 1;
-  /** fixed to 0 */
-  unsigned char read_blk_misalign :1;
-  /** fixed to 0 */
-  unsigned char write_blk_misalign : 1;
-  /** fixed to 0 - no partial read */
-  unsigned char read_bl_partial : 1;
-  // byte 7
-  /** not used */
-  unsigned char reserved3 : 2;
-  /** high part of card size */
-  unsigned char c_size_high : 6;
-  // byte 8
-  /** middle part of card size */
-  unsigned char c_size_mid;
-  // byte 9
-  /** low part of card size */
-  unsigned char c_size_low;
-  // byte 10
-  /** sector size is fixed at 64 KB */
-  unsigned char sector_size_high : 6;
-  /** fixed to 1 - erase single is supported */
-  unsigned char erase_blk_en : 1;
-  /** not used */
-  unsigned char reserved4 : 1;
-  // byte 11
-  unsigned char wp_grp_size : 7;
-  /** sector size is fixed at 64 KB */
-  unsigned char sector_size_low : 1;
-  // byte 12
-  /** write_bl_len fixed for 512 byte blocks */
-  unsigned char write_bl_len_high : 2;
-  /** fixed value of 2 */
-  unsigned char r2w_factor : 3;
-  /** not used */
-  unsigned char reserved5 : 2;
-  /** fixed value of 0 - no write protect groups */
-  unsigned char wp_grp_enable : 1;
-  // byte 13
-  unsigned char reserved6 : 5;
-  /** always zero - no partial block read*/
-  unsigned char write_partial : 1;
-  /** write_bl_len fixed for 512 byte blocks */
-  unsigned char write_bl_len_low : 2;
-  // byte 14
-  unsigned char reserved7: 2;
-  /** Do not use always 0 */
-  unsigned char file_format : 2;
-  unsigned char tmp_write_protect : 1;
-  unsigned char perm_write_protect : 1;
-  unsigned char copy : 1;
-  /** Do not use always 0 */
-  unsigned char file_format_grp : 1;
-  // byte 15
-  /** not used always 1 */
-  unsigned char always1 : 1;
-  /** checksum */
-  unsigned char crc : 7;
-}csd2_t;
-//------------------------------------------------------------------------------
-/** union of old and new style CSD register */
-union csd_t {
-  csd1_t v1;
-  csd2_t v2;
-};
-#endif  // SdInfo_h
-
-#endif
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino Sd2Card Library
+ * Copyright (C) 2009 by William Greiman
+ *
+ * This file is part of the Arduino Sd2Card Library
+ */
+#include "Marlin.h"
+#if ENABLED(SDSUPPORT)
+
+#ifndef SdInfo_h
+#define SdInfo_h
+#include <stdint.h>
+// Based on the document:
+//
+// SD Specifications
+// Part 1
+// Physical Layer
+// Simplified Specification
+// Version 3.01
+// May 18, 2010
+//
+// http://www.sdcard.org/developers/tech/sdcard/pls/simplified_specs
+//------------------------------------------------------------------------------
+// SD card commands
+/** GO_IDLE_STATE - init card in spi mode if CS low */
+uint8_t const CMD0 = 0x00;
+/** SEND_IF_COND - verify SD Memory Card interface operating condition.*/
+uint8_t const CMD8 = 0x08;
+/** SEND_CSD - read the Card Specific Data (CSD register) */
+uint8_t const CMD9 = 0x09;
+/** SEND_CID - read the card identification information (CID register) */
+uint8_t const CMD10 = 0x0A;
+/** STOP_TRANSMISSION - end multiple block read sequence */
+uint8_t const CMD12 = 0x0C;
+/** SEND_STATUS - read the card status register */
+uint8_t const CMD13 = 0x0D;
+/** READ_SINGLE_BLOCK - read a single data block from the card */
+uint8_t const CMD17 = 0x11;
+/** READ_MULTIPLE_BLOCK - read a multiple data blocks from the card */
+uint8_t const CMD18 = 0x12;
+/** WRITE_BLOCK - write a single data block to the card */
+uint8_t const CMD24 = 0x18;
+/** WRITE_MULTIPLE_BLOCK - write blocks of data until a STOP_TRANSMISSION */
+uint8_t const CMD25 = 0x19;
+/** ERASE_WR_BLK_START - sets the address of the first block to be erased */
+uint8_t const CMD32 = 0x20;
+/** ERASE_WR_BLK_END - sets the address of the last block of the continuous
+    range to be erased*/
+uint8_t const CMD33 = 0x21;
+/** ERASE - erase all previously selected blocks */
+uint8_t const CMD38 = 0x26;
+/** APP_CMD - escape for application specific command */
+uint8_t const CMD55 = 0x37;
+/** READ_OCR - read the OCR register of a card */
+uint8_t const CMD58 = 0x3A;
+/** SET_WR_BLK_ERASE_COUNT - Set the number of write blocks to be
+     pre-erased before writing */
+uint8_t const ACMD23 = 0x17;
+/** SD_SEND_OP_COMD - Sends host capacity support information and
+    activates the card's initialization process */
+uint8_t const ACMD41 = 0x29;
+//------------------------------------------------------------------------------
+/** status for card in the ready state */
+uint8_t const R1_READY_STATE = 0x00;
+/** status for card in the idle state */
+uint8_t const R1_IDLE_STATE = 0x01;
+/** status bit for illegal command */
+uint8_t const R1_ILLEGAL_COMMAND = 0x04;
+/** start data token for read or write single block*/
+uint8_t const DATA_START_BLOCK = 0xFE;
+/** stop token for write multiple blocks*/
+uint8_t const STOP_TRAN_TOKEN = 0xFD;
+/** start data token for write multiple blocks*/
+uint8_t const WRITE_MULTIPLE_TOKEN = 0xFC;
+/** mask for data response tokens after a write block operation */
+uint8_t const DATA_RES_MASK = 0x1F;
+/** write data accepted token */
+uint8_t const DATA_RES_ACCEPTED = 0x05;
+//------------------------------------------------------------------------------
+/** Card IDentification (CID) register */
+typedef struct CID {
+  // byte 0
+  /** Manufacturer ID */
+  unsigned char mid;
+  // byte 1-2
+  /** OEM/Application ID */
+  char oid[2];
+  // byte 3-7
+  /** Product name */
+  char pnm[5];
+  // byte 8
+  /** Product revision least significant digit */
+  unsigned char prv_m : 4;
+  /** Product revision most significant digit */
+  unsigned char prv_n : 4;
+  // byte 9-12
+  /** Product serial number */
+  uint32_t psn;
+  // byte 13
+  /** Manufacturing date year low digit */
+  unsigned char mdt_year_high : 4;
+  /** not used */
+  unsigned char reserved : 4;
+  // byte 14
+  /** Manufacturing date month */
+  unsigned char mdt_month : 4;
+  /** Manufacturing date year low digit */
+  unsigned char mdt_year_low : 4;
+  // byte 15
+  /** not used always 1 */
+  unsigned char always1 : 1;
+  /** CRC7 checksum */
+  unsigned char crc : 7;
+} cid_t;
+//------------------------------------------------------------------------------
+/** CSD for version 1.00 cards */
+typedef struct CSDV1 {
+  // byte 0
+  unsigned char reserved1 : 6;
+  unsigned char csd_ver : 2;
+  // byte 1
+  unsigned char taac;
+  // byte 2
+  unsigned char nsac;
+  // byte 3
+  unsigned char tran_speed;
+  // byte 4
+  unsigned char ccc_high;
+  // byte 5
+  unsigned char read_bl_len : 4;
+  unsigned char ccc_low : 4;
+  // byte 6
+  unsigned char c_size_high : 2;
+  unsigned char reserved2 : 2;
+  unsigned char dsr_imp : 1;
+  unsigned char read_blk_misalign : 1;
+  unsigned char write_blk_misalign : 1;
+  unsigned char read_bl_partial : 1;
+  // byte 7
+  unsigned char c_size_mid;
+  // byte 8
+  unsigned char vdd_r_curr_max : 3;
+  unsigned char vdd_r_curr_min : 3;
+  unsigned char c_size_low : 2;
+  // byte 9
+  unsigned char c_size_mult_high : 2;
+  unsigned char vdd_w_cur_max : 3;
+  unsigned char vdd_w_curr_min : 3;
+  // byte 10
+  unsigned char sector_size_high : 6;
+  unsigned char erase_blk_en : 1;
+  unsigned char c_size_mult_low : 1;
+  // byte 11
+  unsigned char wp_grp_size : 7;
+  unsigned char sector_size_low : 1;
+  // byte 12
+  unsigned char write_bl_len_high : 2;
+  unsigned char r2w_factor : 3;
+  unsigned char reserved3 : 2;
+  unsigned char wp_grp_enable : 1;
+  // byte 13
+  unsigned char reserved4 : 5;
+  unsigned char write_partial : 1;
+  unsigned char write_bl_len_low : 2;
+  // byte 14
+  unsigned char reserved5: 2;
+  unsigned char file_format : 2;
+  unsigned char tmp_write_protect : 1;
+  unsigned char perm_write_protect : 1;
+  unsigned char copy : 1;
+  /** Indicates the file format on the card */
+  unsigned char file_format_grp : 1;
+  // byte 15
+  unsigned char always1 : 1;
+  unsigned char crc : 7;
+} csd1_t;
+//------------------------------------------------------------------------------
+/** CSD for version 2.00 cards */
+typedef struct CSDV2 {
+  // byte 0
+  unsigned char reserved1 : 6;
+  unsigned char csd_ver : 2;
+  // byte 1
+  /** fixed to 0x0E */
+  unsigned char taac;
+  // byte 2
+  /** fixed to 0 */
+  unsigned char nsac;
+  // byte 3
+  unsigned char tran_speed;
+  // byte 4
+  unsigned char ccc_high;
+  // byte 5
+  /** This field is fixed to 9h, which indicates READ_BL_LEN=512 Byte */
+  unsigned char read_bl_len : 4;
+  unsigned char ccc_low : 4;
+  // byte 6
+  /** not used */
+  unsigned char reserved2 : 4;
+  unsigned char dsr_imp : 1;
+  /** fixed to 0 */
+  unsigned char read_blk_misalign : 1;
+  /** fixed to 0 */
+  unsigned char write_blk_misalign : 1;
+  /** fixed to 0 - no partial read */
+  unsigned char read_bl_partial : 1;
+  // byte 7
+  /** not used */
+  unsigned char reserved3 : 2;
+  /** high part of card size */
+  unsigned char c_size_high : 6;
+  // byte 8
+  /** middle part of card size */
+  unsigned char c_size_mid;
+  // byte 9
+  /** low part of card size */
+  unsigned char c_size_low;
+  // byte 10
+  /** sector size is fixed at 64 KB */
+  unsigned char sector_size_high : 6;
+  /** fixed to 1 - erase single is supported */
+  unsigned char erase_blk_en : 1;
+  /** not used */
+  unsigned char reserved4 : 1;
+  // byte 11
+  unsigned char wp_grp_size : 7;
+  /** sector size is fixed at 64 KB */
+  unsigned char sector_size_low : 1;
+  // byte 12
+  /** write_bl_len fixed for 512 byte blocks */
+  unsigned char write_bl_len_high : 2;
+  /** fixed value of 2 */
+  unsigned char r2w_factor : 3;
+  /** not used */
+  unsigned char reserved5 : 2;
+  /** fixed value of 0 - no write protect groups */
+  unsigned char wp_grp_enable : 1;
+  // byte 13
+  unsigned char reserved6 : 5;
+  /** always zero - no partial block read*/
+  unsigned char write_partial : 1;
+  /** write_bl_len fixed for 512 byte blocks */
+  unsigned char write_bl_len_low : 2;
+  // byte 14
+  unsigned char reserved7: 2;
+  /** Do not use always 0 */
+  unsigned char file_format : 2;
+  unsigned char tmp_write_protect : 1;
+  unsigned char perm_write_protect : 1;
+  unsigned char copy : 1;
+  /** Do not use always 0 */
+  unsigned char file_format_grp : 1;
+  // byte 15
+  /** not used always 1 */
+  unsigned char always1 : 1;
+  /** checksum */
+  unsigned char crc : 7;
+} csd2_t;
+//------------------------------------------------------------------------------
+/** union of old and new style CSD register */
+union csd_t {
+  csd1_t v1;
+  csd2_t v2;
+};
+#endif  // SdInfo_h
+
+#endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/SdVolume.cpp

@@ -1,405 +1,420 @@
-/* Arduino SdFat Library
- * Copyright (C) 2009 by William Greiman
- *
- * This file is part of the Arduino SdFat Library
- *
- * This Library is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This Library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with the Arduino SdFat Library.  If not, see
- * <http://www.gnu.org/licenses/>.
- */
-#include "Marlin.h"
-#ifdef SDSUPPORT
-
-#include "SdVolume.h"
-//------------------------------------------------------------------------------
-#if !USE_MULTIPLE_CARDS
-// raw block cache
-uint32_t SdVolume::cacheBlockNumber_;  // current block number
-cache_t  SdVolume::cacheBuffer_;       // 512 byte cache for Sd2Card
-Sd2Card* SdVolume::sdCard_;            // pointer to SD card object
-bool     SdVolume::cacheDirty_;        // cacheFlush() will write block if true
-uint32_t SdVolume::cacheMirrorBlock_;  // mirror  block for second FAT
-#endif  // USE_MULTIPLE_CARDS
-//------------------------------------------------------------------------------
-// find a contiguous group of clusters
-bool SdVolume::allocContiguous(uint32_t count, uint32_t* curCluster) {
-  // start of group
-  uint32_t bgnCluster;
-  // end of group
-  uint32_t endCluster;
-  // last cluster of FAT
-  uint32_t fatEnd = clusterCount_ + 1;
-
-  // flag to save place to start next search
-  bool setStart;
-
-  // set search start cluster
-  if (*curCluster) {
-    // try to make file contiguous
-    bgnCluster = *curCluster + 1;
-
-    // don't save new start location
-    setStart = false;
-  } else {
-    // start at likely place for free cluster
-    bgnCluster = allocSearchStart_;
-
-    // save next search start if one cluster
-    setStart = count == 1;
-  }
-  // end of group
-  endCluster = bgnCluster;
-
-  // search the FAT for free clusters
-  for (uint32_t n = 0;; n++, endCluster++) {
-    // can't find space checked all clusters
-    if (n >= clusterCount_) goto fail;
-
-    // past end - start from beginning of FAT
-    if (endCluster > fatEnd) {
-      bgnCluster = endCluster = 2;
-    }
-    uint32_t f;
-    if (!fatGet(endCluster, &f)) goto fail;
-
-    if (f != 0) {
-      // cluster in use try next cluster as bgnCluster
-      bgnCluster = endCluster + 1;
-    } else if ((endCluster - bgnCluster + 1) == count) {
-      // done - found space
-      break;
-    }
-  }
-  // mark end of chain
-  if (!fatPutEOC(endCluster)) goto fail;
-
-  // link clusters
-  while (endCluster > bgnCluster) {
-    if (!fatPut(endCluster - 1, endCluster)) goto fail;
-    endCluster--;
-  }
-  if (*curCluster != 0) {
-    // connect chains
-    if (!fatPut(*curCluster, bgnCluster)) goto fail;
-  }
-  // return first cluster number to caller
-  *curCluster = bgnCluster;
-
-  // remember possible next free cluster
-  if (setStart) allocSearchStart_ = bgnCluster + 1;
-
-  return true;
-
- fail:
-  return false;
-}
-//------------------------------------------------------------------------------
-bool SdVolume::cacheFlush() {
-  if (cacheDirty_) {
-    if (!sdCard_->writeBlock(cacheBlockNumber_, cacheBuffer_.data)) {
-      goto fail;
-    }
-    // mirror FAT tables
-    if (cacheMirrorBlock_) {
-      if (!sdCard_->writeBlock(cacheMirrorBlock_, cacheBuffer_.data)) {
-        goto fail;
-      }
-      cacheMirrorBlock_ = 0;
-    }
-    cacheDirty_ = 0;
-  }
-  return true;
-
- fail:
-  return false;
-}
-//------------------------------------------------------------------------------
-bool SdVolume::cacheRawBlock(uint32_t blockNumber, bool dirty) {
-  if (cacheBlockNumber_ != blockNumber) {
-    if (!cacheFlush()) goto fail;
-    if (!sdCard_->readBlock(blockNumber, cacheBuffer_.data)) goto fail;
-    cacheBlockNumber_ = blockNumber;
-  }
-  if (dirty) cacheDirty_ = true;
-  return true;
-
- fail:
-  return false;
-}
-//------------------------------------------------------------------------------
-// return the size in bytes of a cluster chain
-bool SdVolume::chainSize(uint32_t cluster, uint32_t* size) {
-  uint32_t s = 0;
-  do {
-    if (!fatGet(cluster, &cluster)) goto fail;
-    s += 512UL << clusterSizeShift_;
-  } while (!isEOC(cluster));
-  *size = s;
-  return true;
-
- fail:
-  return false;
-}
-//------------------------------------------------------------------------------
-// Fetch a FAT entry
-bool SdVolume::fatGet(uint32_t cluster, uint32_t* value) {
-  uint32_t lba;
-  if (cluster > (clusterCount_ + 1)) goto fail;
-  if (FAT12_SUPPORT && fatType_ == 12) {
-    uint16_t index = cluster;
-    index += index >> 1;
-    lba = fatStartBlock_ + (index >> 9);
-    if (!cacheRawBlock(lba, CACHE_FOR_READ)) goto fail;
-    index &= 0X1FF;
-    uint16_t tmp = cacheBuffer_.data[index];
-    index++;
-    if (index == 512) {
-      if (!cacheRawBlock(lba + 1, CACHE_FOR_READ)) goto fail;
-      index = 0;
-    }
-    tmp |= cacheBuffer_.data[index] << 8;
-    *value = cluster & 1 ? tmp >> 4 : tmp & 0XFFF;
-    return true;
-  }
-  if (fatType_ == 16) {
-    lba = fatStartBlock_ + (cluster >> 8);
-  } else if (fatType_ == 32) {
-    lba = fatStartBlock_ + (cluster >> 7);
-  } else {
-    goto fail;
-  }
-  if (lba != cacheBlockNumber_) {
-    if (!cacheRawBlock(lba, CACHE_FOR_READ)) goto fail;
-  }
-  if (fatType_ == 16) {
-    *value = cacheBuffer_.fat16[cluster & 0XFF];
-  } else {
-    *value = cacheBuffer_.fat32[cluster & 0X7F] & FAT32MASK;
-  }
-  return true;
-
- fail:
-  return false;
-}
-//------------------------------------------------------------------------------
-// Store a FAT entry
-bool SdVolume::fatPut(uint32_t cluster, uint32_t value) {
-  uint32_t lba;
-  // error if reserved cluster
-  if (cluster < 2) goto fail;
-
-  // error if not in FAT
-  if (cluster > (clusterCount_ + 1)) goto fail;
-
-  if (FAT12_SUPPORT && fatType_ == 12) {
-    uint16_t index = cluster;
-    index += index >> 1;
-    lba = fatStartBlock_ + (index >> 9);
-    if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto fail;
-    // mirror second FAT
-    if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
-    index &= 0X1FF;
-    uint8_t tmp = value;
-    if (cluster & 1) {
-      tmp = (cacheBuffer_.data[index] & 0XF) | tmp << 4;
-    }
-    cacheBuffer_.data[index] = tmp;
-    index++;
-    if (index == 512) {
-      lba++;
-      index = 0;
-      if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto fail;
-      // mirror second FAT
-      if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
-    }
-    tmp = value >> 4;
-    if (!(cluster & 1)) {
-      tmp = ((cacheBuffer_.data[index] & 0XF0)) | tmp >> 4;
-    }
-    cacheBuffer_.data[index] = tmp;
-    return true;
-  }
-  if (fatType_ == 16) {
-    lba = fatStartBlock_ + (cluster >> 8);
-  } else if (fatType_ == 32) {
-    lba = fatStartBlock_ + (cluster >> 7);
-  } else {
-    goto fail;
-  }
-  if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto fail;
-  // store entry
-  if (fatType_ == 16) {
-    cacheBuffer_.fat16[cluster & 0XFF] = value;
-  } else {
-    cacheBuffer_.fat32[cluster & 0X7F] = value;
-  }
-  // mirror second FAT
-  if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
-  return true;
-
- fail:
-  return false;
-}
-//------------------------------------------------------------------------------
-// free a cluster chain
-bool SdVolume::freeChain(uint32_t cluster) {
-  uint32_t next;
-
-  // clear free cluster location
-  allocSearchStart_ = 2;
-
-  do {
-    if (!fatGet(cluster, &next)) goto fail;
-
-    // free cluster
-    if (!fatPut(cluster, 0)) goto fail;
-
-    cluster = next;
-  } while (!isEOC(cluster));
-
-  return true;
-
- fail:
-  return false;
-}
-//------------------------------------------------------------------------------
-/** Volume free space in clusters.
- *
- * \return Count of free clusters for success or -1 if an error occurs.
- */
-int32_t SdVolume::freeClusterCount() {
-  uint32_t free = 0;
-  uint16_t n;
-  uint32_t todo = clusterCount_ + 2;
-
-  if (fatType_ == 16) {
-    n = 256;
-  } else if (fatType_ == 32) {
-    n = 128;
-  } else {
-    // put FAT12 here
-    return -1;
-  }
-
-  for (uint32_t lba = fatStartBlock_; todo; todo -= n, lba++) {
-    if (!cacheRawBlock(lba, CACHE_FOR_READ)) return -1;
-    if (todo < n) n = todo;
-    if (fatType_ == 16) {
-      for (uint16_t i = 0; i < n; i++) {
-        if (cacheBuffer_.fat16[i] == 0) free++;
-      }
-    } else {
-      for (uint16_t i = 0; i < n; i++) {
-        if (cacheBuffer_.fat32[i] == 0) free++;
-      }
-    }
-  }
-  return free;
-}
-//------------------------------------------------------------------------------
-/** Initialize a FAT volume.
- *
- * \param[in] dev The SD card where the volume is located.
- *
- * \param[in] part The partition to be used.  Legal values for \a part are
- * 1-4 to use the corresponding partition on a device formatted with
- * a MBR, Master Boot Record, or zero if the device is formatted as
- * a super floppy with the FAT boot sector in block zero.
- *
- * \return The value one, true, is returned for success and
- * the value zero, false, is returned for failure.  Reasons for
- * failure include not finding a valid partition, not finding a valid
- * FAT file system in the specified partition or an I/O error.
- */
-bool SdVolume::init(Sd2Card* dev, uint8_t part) {
-  uint32_t totalBlocks;
-  uint32_t volumeStartBlock = 0;
-  fat32_boot_t* fbs;
-
-  sdCard_ = dev;
-  fatType_ = 0;
-  allocSearchStart_ = 2;
-  cacheDirty_ = 0;  // cacheFlush() will write block if true
-  cacheMirrorBlock_ = 0;
-  cacheBlockNumber_ = 0XFFFFFFFF;
-
-  // if part == 0 assume super floppy with FAT boot sector in block zero
-  // if part > 0 assume mbr volume with partition table
-  if (part) {
-    if (part > 4)goto fail;
-    if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) goto fail;
-    part_t* p = &cacheBuffer_.mbr.part[part-1];
-    if ((p->boot & 0X7F) !=0  ||
-      p->totalSectors < 100 ||
-      p->firstSector == 0) {
-      // not a valid partition
-      goto fail;
-    }
-    volumeStartBlock = p->firstSector;
-  }
-  if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) goto fail;
-  fbs = &cacheBuffer_.fbs32;
-  if (fbs->bytesPerSector != 512 ||
-    fbs->fatCount == 0 ||
-    fbs->reservedSectorCount == 0 ||
-    fbs->sectorsPerCluster == 0) {
-       // not valid FAT volume
-      goto fail;
-  }
-  fatCount_ = fbs->fatCount;
-  blocksPerCluster_ = fbs->sectorsPerCluster;
-  // determine shift that is same as multiply by blocksPerCluster_
-  clusterSizeShift_ = 0;
-  while (blocksPerCluster_ != (1 << clusterSizeShift_)) {
-    // error if not power of 2
-    if (clusterSizeShift_++ > 7) goto fail;
-  }
-  blocksPerFat_ = fbs->sectorsPerFat16 ?
-                    fbs->sectorsPerFat16 : fbs->sectorsPerFat32;
-
-  fatStartBlock_ = volumeStartBlock + fbs->reservedSectorCount;
-
-  // count for FAT16 zero for FAT32
-  rootDirEntryCount_ = fbs->rootDirEntryCount;
-
-  // directory start for FAT16 dataStart for FAT32
-  rootDirStart_ = fatStartBlock_ + fbs->fatCount * blocksPerFat_;
-
-  // data start for FAT16 and FAT32
-  dataStartBlock_ = rootDirStart_ + ((32 * fbs->rootDirEntryCount + 511)/512);
-
-  // total blocks for FAT16 or FAT32
-  totalBlocks = fbs->totalSectors16 ?
-                           fbs->totalSectors16 : fbs->totalSectors32;
-  // total data blocks
-  clusterCount_ = totalBlocks - (dataStartBlock_ - volumeStartBlock);
-
-  // divide by cluster size to get cluster count
-  clusterCount_ >>= clusterSizeShift_;
-
-  // FAT type is determined by cluster count
-  if (clusterCount_ < 4085) {
-    fatType_ = 12;
-    if (!FAT12_SUPPORT) goto fail;
-  } else if (clusterCount_ < 65525) {
-    fatType_ = 16;
-  } else {
-    rootDirStart_ = fbs->fat32RootCluster;
-    fatType_ = 32;
-  }
-  return true;
-
- fail:
-  return false;
-}
-#endif
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino SdFat Library
+ * Copyright (C) 2009 by William Greiman
+ *
+ * This file is part of the Arduino Sd2Card Library
+ */
+#include "Marlin.h"
+#if ENABLED(SDSUPPORT)
+
+#include "SdVolume.h"
+//------------------------------------------------------------------------------
+#if !USE_MULTIPLE_CARDS
+  // raw block cache
+  uint32_t SdVolume::cacheBlockNumber_;  // current block number
+  cache_t  SdVolume::cacheBuffer_;       // 512 byte cache for Sd2Card
+  Sd2Card* SdVolume::sdCard_;            // pointer to SD card object
+  bool     SdVolume::cacheDirty_;        // cacheFlush() will write block if true
+  uint32_t SdVolume::cacheMirrorBlock_;  // mirror  block for second FAT
+#endif  // USE_MULTIPLE_CARDS
+//------------------------------------------------------------------------------
+// find a contiguous group of clusters
+bool SdVolume::allocContiguous(uint32_t count, uint32_t* curCluster) {
+  // start of group
+  uint32_t bgnCluster;
+  // end of group
+  uint32_t endCluster;
+  // last cluster of FAT
+  uint32_t fatEnd = clusterCount_ + 1;
+
+  // flag to save place to start next search
+  bool setStart;
+
+  // set search start cluster
+  if (*curCluster) {
+    // try to make file contiguous
+    bgnCluster = *curCluster + 1;
+
+    // don't save new start location
+    setStart = false;
+  }
+  else {
+    // start at likely place for free cluster
+    bgnCluster = allocSearchStart_;
+
+    // save next search start if one cluster
+    setStart = count == 1;
+  }
+  // end of group
+  endCluster = bgnCluster;
+
+  // search the FAT for free clusters
+  for (uint32_t n = 0;; n++, endCluster++) {
+    // can't find space checked all clusters
+    if (n >= clusterCount_) goto FAIL;
+
+    // past end - start from beginning of FAT
+    if (endCluster > fatEnd) {
+      bgnCluster = endCluster = 2;
+    }
+    uint32_t f;
+    if (!fatGet(endCluster, &f)) goto FAIL;
+
+    if (f != 0) {
+      // cluster in use try next cluster as bgnCluster
+      bgnCluster = endCluster + 1;
+    }
+    else if ((endCluster - bgnCluster + 1) == count) {
+      // done - found space
+      break;
+    }
+  }
+  // mark end of chain
+  if (!fatPutEOC(endCluster)) goto FAIL;
+
+  // link clusters
+  while (endCluster > bgnCluster) {
+    if (!fatPut(endCluster - 1, endCluster)) goto FAIL;
+    endCluster--;
+  }
+  if (*curCluster != 0) {
+    // connect chains
+    if (!fatPut(*curCluster, bgnCluster)) goto FAIL;
+  }
+  // return first cluster number to caller
+  *curCluster = bgnCluster;
+
+  // remember possible next free cluster
+  if (setStart) allocSearchStart_ = bgnCluster + 1;
+
+  return true;
+  FAIL:
+  return false;
+}
+//------------------------------------------------------------------------------
+bool SdVolume::cacheFlush() {
+  if (cacheDirty_) {
+    if (!sdCard_->writeBlock(cacheBlockNumber_, cacheBuffer_.data)) {
+      goto FAIL;
+    }
+    // mirror FAT tables
+    if (cacheMirrorBlock_) {
+      if (!sdCard_->writeBlock(cacheMirrorBlock_, cacheBuffer_.data)) {
+        goto FAIL;
+      }
+      cacheMirrorBlock_ = 0;
+    }
+    cacheDirty_ = 0;
+  }
+  return true;
+  FAIL:
+  return false;
+}
+//------------------------------------------------------------------------------
+bool SdVolume::cacheRawBlock(uint32_t blockNumber, bool dirty) {
+  if (cacheBlockNumber_ != blockNumber) {
+    if (!cacheFlush()) goto FAIL;
+    if (!sdCard_->readBlock(blockNumber, cacheBuffer_.data)) goto FAIL;
+    cacheBlockNumber_ = blockNumber;
+  }
+  if (dirty) cacheDirty_ = true;
+  return true;
+  FAIL:
+  return false;
+}
+//------------------------------------------------------------------------------
+// return the size in bytes of a cluster chain
+bool SdVolume::chainSize(uint32_t cluster, uint32_t* size) {
+  uint32_t s = 0;
+  do {
+    if (!fatGet(cluster, &cluster)) goto FAIL;
+    s += 512UL << clusterSizeShift_;
+  } while (!isEOC(cluster));
+  *size = s;
+  return true;
+  FAIL:
+  return false;
+}
+//------------------------------------------------------------------------------
+// Fetch a FAT entry
+bool SdVolume::fatGet(uint32_t cluster, uint32_t* value) {
+  uint32_t lba;
+  if (cluster > (clusterCount_ + 1)) goto FAIL;
+  if (FAT12_SUPPORT && fatType_ == 12) {
+    uint16_t index = cluster;
+    index += index >> 1;
+    lba = fatStartBlock_ + (index >> 9);
+    if (!cacheRawBlock(lba, CACHE_FOR_READ)) goto FAIL;
+    index &= 0x1FF;
+    uint16_t tmp = cacheBuffer_.data[index];
+    index++;
+    if (index == 512) {
+      if (!cacheRawBlock(lba + 1, CACHE_FOR_READ)) goto FAIL;
+      index = 0;
+    }
+    tmp |= cacheBuffer_.data[index] << 8;
+    *value = cluster & 1 ? tmp >> 4 : tmp & 0xFFF;
+    return true;
+  }
+  if (fatType_ == 16) {
+    lba = fatStartBlock_ + (cluster >> 8);
+  }
+  else if (fatType_ == 32) {
+    lba = fatStartBlock_ + (cluster >> 7);
+  }
+  else {
+    goto FAIL;
+  }
+  if (lba != cacheBlockNumber_) {
+    if (!cacheRawBlock(lba, CACHE_FOR_READ)) goto FAIL;
+  }
+  if (fatType_ == 16) {
+    *value = cacheBuffer_.fat16[cluster & 0xFF];
+  }
+  else {
+    *value = cacheBuffer_.fat32[cluster & 0x7F] & FAT32MASK;
+  }
+  return true;
+  FAIL:
+  return false;
+}
+//------------------------------------------------------------------------------
+// Store a FAT entry
+bool SdVolume::fatPut(uint32_t cluster, uint32_t value) {
+  uint32_t lba;
+  // error if reserved cluster
+  if (cluster < 2) goto FAIL;
+
+  // error if not in FAT
+  if (cluster > (clusterCount_ + 1)) goto FAIL;
+
+  if (FAT12_SUPPORT && fatType_ == 12) {
+    uint16_t index = cluster;
+    index += index >> 1;
+    lba = fatStartBlock_ + (index >> 9);
+    if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto FAIL;
+    // mirror second FAT
+    if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
+    index &= 0x1FF;
+    uint8_t tmp = value;
+    if (cluster & 1) {
+      tmp = (cacheBuffer_.data[index] & 0XF) | tmp << 4;
+    }
+    cacheBuffer_.data[index] = tmp;
+    index++;
+    if (index == 512) {
+      lba++;
+      index = 0;
+      if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto FAIL;
+      // mirror second FAT
+      if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
+    }
+    tmp = value >> 4;
+    if (!(cluster & 1)) {
+      tmp = ((cacheBuffer_.data[index] & 0xF0)) | tmp >> 4;
+    }
+    cacheBuffer_.data[index] = tmp;
+    return true;
+  }
+  if (fatType_ == 16) {
+    lba = fatStartBlock_ + (cluster >> 8);
+  }
+  else if (fatType_ == 32) {
+    lba = fatStartBlock_ + (cluster >> 7);
+  }
+  else {
+    goto FAIL;
+  }
+  if (!cacheRawBlock(lba, CACHE_FOR_WRITE)) goto FAIL;
+  // store entry
+  if (fatType_ == 16) {
+    cacheBuffer_.fat16[cluster & 0xFF] = value;
+  }
+  else {
+    cacheBuffer_.fat32[cluster & 0x7F] = value;
+  }
+  // mirror second FAT
+  if (fatCount_ > 1) cacheMirrorBlock_ = lba + blocksPerFat_;
+  return true;
+  FAIL:
+  return false;
+}
+//------------------------------------------------------------------------------
+// free a cluster chain
+bool SdVolume::freeChain(uint32_t cluster) {
+  uint32_t next;
+
+  // clear free cluster location
+  allocSearchStart_ = 2;
+
+  do {
+    if (!fatGet(cluster, &next)) goto FAIL;
+
+    // free cluster
+    if (!fatPut(cluster, 0)) goto FAIL;
+
+    cluster = next;
+  } while (!isEOC(cluster));
+
+  return true;
+  FAIL:
+  return false;
+}
+//------------------------------------------------------------------------------
+/** Volume free space in clusters.
+ *
+ * \return Count of free clusters for success or -1 if an error occurs.
+ */
+int32_t SdVolume::freeClusterCount() {
+  uint32_t free = 0;
+  uint16_t n;
+  uint32_t todo = clusterCount_ + 2;
+
+  if (fatType_ == 16) {
+    n = 256;
+  }
+  else if (fatType_ == 32) {
+    n = 128;
+  }
+  else {
+    // put FAT12 here
+    return -1;
+  }
+
+  for (uint32_t lba = fatStartBlock_; todo; todo -= n, lba++) {
+    if (!cacheRawBlock(lba, CACHE_FOR_READ)) return -1;
+    NOMORE(n, todo);
+    if (fatType_ == 16) {
+      for (uint16_t i = 0; i < n; i++) {
+        if (cacheBuffer_.fat16[i] == 0) free++;
+      }
+    }
+    else {
+      for (uint16_t i = 0; i < n; i++) {
+        if (cacheBuffer_.fat32[i] == 0) free++;
+      }
+    }
+  }
+  return free;
+}
+//------------------------------------------------------------------------------
+/** Initialize a FAT volume.
+ *
+ * \param[in] dev The SD card where the volume is located.
+ *
+ * \param[in] part The partition to be used.  Legal values for \a part are
+ * 1-4 to use the corresponding partition on a device formatted with
+ * a MBR, Master Boot Record, or zero if the device is formatted as
+ * a super floppy with the FAT boot sector in block zero.
+ *
+ * \return The value one, true, is returned for success and
+ * the value zero, false, is returned for failure.  Reasons for
+ * failure include not finding a valid partition, not finding a valid
+ * FAT file system in the specified partition or an I/O error.
+ */
+bool SdVolume::init(Sd2Card* dev, uint8_t part) {
+  uint32_t totalBlocks;
+  uint32_t volumeStartBlock = 0;
+  fat32_boot_t* fbs;
+
+  sdCard_ = dev;
+  fatType_ = 0;
+  allocSearchStart_ = 2;
+  cacheDirty_ = 0;  // cacheFlush() will write block if true
+  cacheMirrorBlock_ = 0;
+  cacheBlockNumber_ = 0xFFFFFFFF;
+
+  // if part == 0 assume super floppy with FAT boot sector in block zero
+  // if part > 0 assume mbr volume with partition table
+  if (part) {
+    if (part > 4)goto FAIL;
+    if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) goto FAIL;
+    part_t* p = &cacheBuffer_.mbr.part[part - 1];
+    if ((p->boot & 0x7F) != 0  ||
+        p->totalSectors < 100 ||
+        p->firstSector == 0) {
+      // not a valid partition
+      goto FAIL;
+    }
+    volumeStartBlock = p->firstSector;
+  }
+  if (!cacheRawBlock(volumeStartBlock, CACHE_FOR_READ)) goto FAIL;
+  fbs = &cacheBuffer_.fbs32;
+  if (fbs->bytesPerSector != 512 ||
+      fbs->fatCount == 0 ||
+      fbs->reservedSectorCount == 0 ||
+      fbs->sectorsPerCluster == 0) {
+    // not valid FAT volume
+    goto FAIL;
+  }
+  fatCount_ = fbs->fatCount;
+  blocksPerCluster_ = fbs->sectorsPerCluster;
+  // determine shift that is same as multiply by blocksPerCluster_
+  clusterSizeShift_ = 0;
+  while (blocksPerCluster_ != _BV(clusterSizeShift_)) {
+    // error if not power of 2
+    if (clusterSizeShift_++ > 7) goto FAIL;
+  }
+  blocksPerFat_ = fbs->sectorsPerFat16 ?
+                  fbs->sectorsPerFat16 : fbs->sectorsPerFat32;
+
+  fatStartBlock_ = volumeStartBlock + fbs->reservedSectorCount;
+
+  // count for FAT16 zero for FAT32
+  rootDirEntryCount_ = fbs->rootDirEntryCount;
+
+  // directory start for FAT16 dataStart for FAT32
+  rootDirStart_ = fatStartBlock_ + fbs->fatCount * blocksPerFat_;
+
+  // data start for FAT16 and FAT32
+  dataStartBlock_ = rootDirStart_ + ((32 * fbs->rootDirEntryCount + 511) / 512);
+
+  // total blocks for FAT16 or FAT32
+  totalBlocks = fbs->totalSectors16 ?
+                fbs->totalSectors16 : fbs->totalSectors32;
+
+  // total data blocks
+  clusterCount_ = totalBlocks - (dataStartBlock_ - volumeStartBlock);
+
+  // divide by cluster size to get cluster count
+  clusterCount_ >>= clusterSizeShift_;
+
+  // FAT type is determined by cluster count
+  if (clusterCount_ < 4085) {
+    fatType_ = 12;
+    if (!FAT12_SUPPORT) goto FAIL;
+  }
+  else if (clusterCount_ < 65525) {
+    fatType_ = 16;
+  }
+  else {
+    rootDirStart_ = fbs->fat32RootCluster;
+    fatType_ = 32;
+  }
+  return true;
+  FAIL:
+  return false;
+}
+#endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/SdVolume.h

@@ -1,24 +1,33 @@
-/* Arduino SdFat Library
- * Copyright (C) 2009 by William Greiman
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
- * This file is part of the Arduino SdFat Library
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
  *
- * This Library is free software: you can redistribute it and/or modify
+ * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
  * (at your option) any later version.
  *
- * This Library is distributed in the hope that it will be useful,
+ * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
- * along with the Arduino SdFat Library.  If not, see
- * <http://www.gnu.org/licenses/>.
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino SdFat Library
+ * Copyright (C) 2009 by William Greiman
+ *
+ * This file is part of the Arduino Sd2Card Library
  */
 #include "Marlin.h"
-#ifdef SDSUPPORT
+#if ENABLED(SDSUPPORT)
 #ifndef SdVolume_h
 #define SdVolume_h
 /**
@@ -67,7 +76,7 @@ class SdVolume {
    */
   cache_t* cacheClear() {
     if (!cacheFlush()) return 0;
-    cacheBlockNumber_ = 0XFFFFFFFF;
+    cacheBlockNumber_ = 0xFFFFFFFF;
     return &cacheBuffer_;
   }
   /** Initialize a FAT volume.  Try partition one first then try super
@@ -117,7 +126,7 @@ class SdVolume {
    * \return true for success or false for failure
    */
   bool dbgFat(uint32_t n, uint32_t* v) {return fatGet(n, v);}
-//------------------------------------------------------------------------------
+  //------------------------------------------------------------------------------
  private:
   // Allow SdBaseFile access to SdVolume private data.
   friend class SdBaseFile;
@@ -154,12 +163,15 @@ class SdVolume {
   //----------------------------------------------------------------------------
   bool allocContiguous(uint32_t count, uint32_t* curCluster);
   uint8_t blockOfCluster(uint32_t position) const {
-          return (position >> 9) & (blocksPerCluster_ - 1);}
+    return (position >> 9) & (blocksPerCluster_ - 1);
+  }
   uint32_t clusterStartBlock(uint32_t cluster) const {
-           return dataStartBlock_ + ((cluster - 2) << clusterSizeShift_);}
+    return dataStartBlock_ + ((cluster - 2) << clusterSizeShift_);
+  }
   uint32_t blockNumber(uint32_t cluster, uint32_t position) const {
-           return clusterStartBlock(cluster) + blockOfCluster(position);}
-  cache_t *cache() {return &cacheBuffer_;}
+    return clusterStartBlock(cluster) + blockOfCluster(position);
+  }
+  cache_t* cache() {return &cacheBuffer_;}
   uint32_t cacheBlockNumber() {return cacheBlockNumber_;}
 #if USE_MULTIPLE_CARDS
   bool cacheFlush();
@@ -187,11 +199,12 @@ class SdVolume {
     return  cluster >= FAT32EOC_MIN;
   }
   bool readBlock(uint32_t block, uint8_t* dst) {
-    return sdCard_->readBlock(block, dst);}
+    return sdCard_->readBlock(block, dst);
+  }
   bool writeBlock(uint32_t block, const uint8_t* dst) {
     return sdCard_->writeBlock(block, dst);
   }
-//------------------------------------------------------------------------------
+  //------------------------------------------------------------------------------
   // Deprecated functions  - suppress cpplint warnings with NOLINT comment
 #if ALLOW_DEPRECATED_FUNCTIONS && !defined(DOXYGEN)
  public:
@@ -211,4 +224,4 @@ class SdVolume {
 #endif  // ALLOW_DEPRECATED_FUNCTIONS
 };
 #endif  // SdVolume
-#endif
+#endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/Servo.cpp

@@ -1,344 +0,0 @@
-/*
- Servo.cpp - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
- Copyright (c) 2009 Michael Margolis.  All right reserved.
-
- This library is free software; you can redistribute it and/or
- modify it under the terms of the GNU Lesser General Public
- License as published by the Free Software Foundation; either
- version 2.1 of the License, or (at your option) any later version.
-
- This library is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- Lesser General Public License for more details.
-
- You should have received a copy of the GNU Lesser General Public
- License along with this library; if not, write to the Free Software
- Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/*
-
- A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
- The servos are pulsed in the background using the value most recently written using the write() method
-
- Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached.
- Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four.
-
- The methods are:
-
- Servo - Class for manipulating servo motors connected to Arduino pins.
-
- attach(pin )  - Attaches a servo motor to an i/o pin.
- attach(pin, min, max  ) - Attaches to a pin setting min and max values in microseconds
- default min is 544, max is 2400
-
- write()     - Sets the servo angle in degrees.  (invalid angle that is valid as pulse in microseconds is treated as microseconds)
- writeMicroseconds() - Sets the servo pulse width in microseconds
- read()      - Gets the last written servo pulse width as an angle between 0 and 180.
- readMicroseconds()   - Gets the last written servo pulse width in microseconds. (was read_us() in first release)
- attached()  - Returns true if there is a servo attached.
- detach()    - Stops an attached servos from pulsing its i/o pin.
-
-*/
-#include "Configuration.h" 
-
-#ifdef NUM_SERVOS
-#include <avr/interrupt.h>
-#include <Arduino.h>
-
-#include "Servo.h"
-
-#define usToTicks(_us)    (( clockCyclesPerMicrosecond()* _us) / 8)     // converts microseconds to tick (assumes prescale of 8)  // 12 Aug 2009
-#define ticksToUs(_ticks) (( (unsigned)_ticks * 8)/ clockCyclesPerMicrosecond() ) // converts from ticks back to microseconds
-
-
-#define TRIM_DURATION       2                               // compensation ticks to trim adjust for digitalWrite delays // 12 August 2009
-
-//#define NBR_TIMERS        (MAX_SERVOS / SERVOS_PER_TIMER)
-
-static servo_t servos[MAX_SERVOS];                          // static array of servo structures
-static volatile int8_t Channel[_Nbr_16timers ];             // counter for the servo being pulsed for each timer (or -1 if refresh interval)
-
-uint8_t ServoCount = 0;                                     // the total number of attached servos
-
-
-// convenience macros
-#define SERVO_INDEX_TO_TIMER(_servo_nbr) ((timer16_Sequence_t)(_servo_nbr / SERVOS_PER_TIMER)) // returns the timer controlling this servo
-#define SERVO_INDEX_TO_CHANNEL(_servo_nbr) (_servo_nbr % SERVOS_PER_TIMER)       // returns the index of the servo on this timer
-#define SERVO_INDEX(_timer,_channel)  ((_timer*SERVOS_PER_TIMER) + _channel)     // macro to access servo index by timer and channel
-#define SERVO(_timer,_channel)  (servos[SERVO_INDEX(_timer,_channel)])            // macro to access servo class by timer and channel
-
-#define SERVO_MIN() (MIN_PULSE_WIDTH - this->min * 4)  // minimum value in uS for this servo
-#define SERVO_MAX() (MAX_PULSE_WIDTH - this->max * 4)  // maximum value in uS for this servo
-
-/************ static functions common to all instances ***********************/
-
-static inline void handle_interrupts(timer16_Sequence_t timer, volatile uint16_t *TCNTn, volatile uint16_t* OCRnA)
-{
-  if( Channel[timer] < 0 )
-    *TCNTn = 0; // channel set to -1 indicated that refresh interval completed so reset the timer
-  else{
-    if( SERVO_INDEX(timer,Channel[timer]) < ServoCount && SERVO(timer,Channel[timer]).Pin.isActive == true )
-      digitalWrite( SERVO(timer,Channel[timer]).Pin.nbr,LOW); // pulse this channel low if activated
-  }
-
-  Channel[timer]++;    // increment to the next channel
-  if( SERVO_INDEX(timer,Channel[timer]) < ServoCount && Channel[timer] < SERVOS_PER_TIMER) {
-    *OCRnA = *TCNTn + SERVO(timer,Channel[timer]).ticks;
-    if(SERVO(timer,Channel[timer]).Pin.isActive == true)     // check if activated
-      digitalWrite( SERVO(timer,Channel[timer]).Pin.nbr,HIGH); // its an active channel so pulse it high
-  }
-  else {
-    // finished all channels so wait for the refresh period to expire before starting over
-    if( ((unsigned)*TCNTn) + 4 < usToTicks(REFRESH_INTERVAL) )  // allow a few ticks to ensure the next OCR1A not missed
-      *OCRnA = (unsigned int)usToTicks(REFRESH_INTERVAL);
-    else
-      *OCRnA = *TCNTn + 4;  // at least REFRESH_INTERVAL has elapsed
-    Channel[timer] = -1; // this will get incremented at the end of the refresh period to start again at the first channel
-  }
-}
-
-#ifndef WIRING // Wiring pre-defines signal handlers so don't define any if compiling for the Wiring platform
-// Interrupt handlers for Arduino
-#if defined(_useTimer1)
-SIGNAL (TIMER1_COMPA_vect)
-{
-  handle_interrupts(_timer1, &TCNT1, &OCR1A);
-}
-#endif
-
-#if defined(_useTimer3)
-SIGNAL (TIMER3_COMPA_vect)
-{
-  handle_interrupts(_timer3, &TCNT3, &OCR3A);
-}
-#endif
-
-#if defined(_useTimer4)
-SIGNAL (TIMER4_COMPA_vect)
-{
-  handle_interrupts(_timer4, &TCNT4, &OCR4A);
-}
-#endif
-
-#if defined(_useTimer5)
-SIGNAL (TIMER5_COMPA_vect)
-{
-  handle_interrupts(_timer5, &TCNT5, &OCR5A);
-}
-#endif
-
-#elif defined WIRING
-// Interrupt handlers for Wiring
-#if defined(_useTimer1)
-void Timer1Service()
-{
-  handle_interrupts(_timer1, &TCNT1, &OCR1A);
-}
-#endif
-#if defined(_useTimer3)
-void Timer3Service()
-{
-  handle_interrupts(_timer3, &TCNT3, &OCR3A);
-}
-#endif
-#endif
-
-
-static void initISR(timer16_Sequence_t timer)
-{
-#if defined (_useTimer1)
-  if(timer == _timer1) {
-    TCCR1A = 0;             // normal counting mode
-    TCCR1B = _BV(CS11);     // set prescaler of 8
-    TCNT1 = 0;              // clear the timer count
-#if defined(__AVR_ATmega8__)|| defined(__AVR_ATmega128__)
-    TIFR |= _BV(OCF1A);      // clear any pending interrupts;
-    TIMSK |=  _BV(OCIE1A) ;  // enable the output compare interrupt
-#else
-    // here if not ATmega8 or ATmega128
-    TIFR1 |= _BV(OCF1A);     // clear any pending interrupts;
-    TIMSK1 |=  _BV(OCIE1A) ; // enable the output compare interrupt
-#endif
-#if defined(WIRING)
-    timerAttach(TIMER1OUTCOMPAREA_INT, Timer1Service);
-#endif
-  }
-#endif
-
-#if defined (_useTimer3)
-  if(timer == _timer3) {
-    TCCR3A = 0;             // normal counting mode
-    TCCR3B = _BV(CS31);     // set prescaler of 8
-    TCNT3 = 0;              // clear the timer count
-#if defined(__AVR_ATmega128__)
-    TIFR |= _BV(OCF3A);     // clear any pending interrupts;
-	ETIMSK |= _BV(OCIE3A);  // enable the output compare interrupt
-#else
-    TIFR3 = _BV(OCF3A);     // clear any pending interrupts;
-    TIMSK3 =  _BV(OCIE3A) ; // enable the output compare interrupt
-#endif
-#if defined(WIRING)
-    timerAttach(TIMER3OUTCOMPAREA_INT, Timer3Service);  // for Wiring platform only
-#endif
-  }
-#endif
-
-#if defined (_useTimer4)
-  if(timer == _timer4) {
-    TCCR4A = 0;             // normal counting mode
-    TCCR4B = _BV(CS41);     // set prescaler of 8
-    TCNT4 = 0;              // clear the timer count
-    TIFR4 = _BV(OCF4A);     // clear any pending interrupts;
-    TIMSK4 =  _BV(OCIE4A) ; // enable the output compare interrupt
-  }
-#endif
-
-#if defined (_useTimer5)
-  if(timer == _timer5) {
-    TCCR5A = 0;             // normal counting mode
-    TCCR5B = _BV(CS51);     // set prescaler of 8
-    TCNT5 = 0;              // clear the timer count
-    TIFR5 = _BV(OCF5A);     // clear any pending interrupts;
-    TIMSK5 =  _BV(OCIE5A) ; // enable the output compare interrupt
-  }
-#endif
-}
-
-static void finISR(timer16_Sequence_t timer)
-{
-    //disable use of the given timer
-#if defined WIRING   // Wiring
-  if(timer == _timer1) {
-    #if defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__)
-    TIMSK1 &=  ~_BV(OCIE1A) ;  // disable timer 1 output compare interrupt
-    #else
-    TIMSK &=  ~_BV(OCIE1A) ;  // disable timer 1 output compare interrupt
-    #endif
-    timerDetach(TIMER1OUTCOMPAREA_INT);
-  }
-  else if(timer == _timer3) {
-    #if defined(__AVR_ATmega1281__)||defined(__AVR_ATmega2561__)
-    TIMSK3 &= ~_BV(OCIE3A);    // disable the timer3 output compare A interrupt
-    #else
-    ETIMSK &= ~_BV(OCIE3A);    // disable the timer3 output compare A interrupt
-    #endif
-    timerDetach(TIMER3OUTCOMPAREA_INT);
-  }
-#else
-    //For arduino - in future: call here to a currently undefined function to reset the timer
-#endif
-}
-
-static boolean isTimerActive(timer16_Sequence_t timer)
-{
-  // returns true if any servo is active on this timer
-  for(uint8_t channel=0; channel < SERVOS_PER_TIMER; channel++) {
-    if(SERVO(timer,channel).Pin.isActive == true)
-      return true;
-  }
-  return false;
-}
-
-
-/****************** end of static functions ******************************/
-
-Servo::Servo()
-{
-  if( ServoCount < MAX_SERVOS) {
-    this->servoIndex = ServoCount++;                    // assign a servo index to this instance
-	servos[this->servoIndex].ticks = usToTicks(DEFAULT_PULSE_WIDTH);   // store default values  - 12 Aug 2009
-  }
-  else
-    this->servoIndex = INVALID_SERVO ;  // too many servos
-}
-
-uint8_t Servo::attach(int pin)
-{
-  return this->attach(pin, MIN_PULSE_WIDTH, MAX_PULSE_WIDTH);
-}
-
-uint8_t Servo::attach(int pin, int min, int max)
-{
-  if(this->servoIndex < MAX_SERVOS ) {
-#if defined (ENABLE_AUTO_BED_LEVELING) && (PROBE_SERVO_DEACTIVATION_DELAY > 0)
-    if (pin > 0) this->pin = pin; else pin = this->pin;
-#endif
-    pinMode( pin, OUTPUT) ;                                   // set servo pin to output
-    servos[this->servoIndex].Pin.nbr = pin;
-    // todo min/max check: abs(min - MIN_PULSE_WIDTH) /4 < 128
-    this->min  = (MIN_PULSE_WIDTH - min)/4; //resolution of min/max is 4 uS
-    this->max  = (MAX_PULSE_WIDTH - max)/4;
-    // initialize the timer if it has not already been initialized
-    timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex);
-    if(isTimerActive(timer) == false)
-      initISR(timer);
-    servos[this->servoIndex].Pin.isActive = true;  // this must be set after the check for isTimerActive
-  }
-  return this->servoIndex ;
-}
-
-void Servo::detach()
-{
-  servos[this->servoIndex].Pin.isActive = false;
-  timer16_Sequence_t timer = SERVO_INDEX_TO_TIMER(servoIndex);
-  if(isTimerActive(timer) == false) {
-    finISR(timer);
-  }
-}
-
-void Servo::write(int value)
-{
-  if(value < MIN_PULSE_WIDTH)
-  {  // treat values less than 544 as angles in degrees (valid values in microseconds are handled as microseconds)
-    if(value < 0) value = 0;
-    if(value > 180) value = 180;
-    value = map(value, 0, 180, SERVO_MIN(),  SERVO_MAX());
-  }
-  this->writeMicroseconds(value);
-}
-
-void Servo::writeMicroseconds(int value)
-{
-  // calculate and store the values for the given channel
-  byte channel = this->servoIndex;
-  if( (channel < MAX_SERVOS) )   // ensure channel is valid
-  {
-    if( value < SERVO_MIN() )          // ensure pulse width is valid
-      value = SERVO_MIN();
-    else if( value > SERVO_MAX() )
-      value = SERVO_MAX();
-
-  	value = value - TRIM_DURATION;
-    value = usToTicks(value);  // convert to ticks after compensating for interrupt overhead - 12 Aug 2009
-
-    uint8_t oldSREG = SREG;
-    cli();
-    servos[channel].ticks = value;
-    SREG = oldSREG;
-  }
-}
-
-int Servo::read() // return the value as degrees
-{
-  return  map( this->readMicroseconds()+1, SERVO_MIN(), SERVO_MAX(), 0, 180);
-}
-
-int Servo::readMicroseconds()
-{
-  unsigned int pulsewidth;
-  if( this->servoIndex != INVALID_SERVO )
-    pulsewidth = ticksToUs(servos[this->servoIndex].ticks)  + TRIM_DURATION ;   // 12 aug 2009
-  else
-    pulsewidth  = 0;
-
-  return pulsewidth;
-}
-
-bool Servo::attached()
-{
-  return servos[this->servoIndex].Pin.isActive ;
-}
-
-#endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/Servo.h

@@ -1,135 +0,0 @@
-/*
-  Servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
-  Copyright (c) 2009 Michael Margolis.  All right reserved.
-
-  This library is free software; you can redistribute it and/or
-  modify it under the terms of the GNU Lesser General Public
-  License as published by the Free Software Foundation; either
-  version 2.1 of the License, or (at your option) any later version.
-
-  This library is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-  Lesser General Public License for more details.
-
-  You should have received a copy of the GNU Lesser General Public
-  License along with this library; if not, write to the Free Software
-  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
-*/
-
-/*
-
-  A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method.
-  The servos are pulsed in the background using the value most recently written using the write() method
-
-  Note that analogWrite of PWM on pins associated with the timer are disabled when the first servo is attached.
-  Timers are seized as needed in groups of 12 servos - 24 servos use two timers, 48 servos will use four.
-  The sequence used to sieze timers is defined in timers.h
-
-  The methods are:
-
-   Servo - Class for manipulating servo motors connected to Arduino pins.
-
-   attach(pin )  - Attaches a servo motor to an i/o pin.
-   attach(pin, min, max  ) - Attaches to a pin setting min and max values in microseconds
-   default min is 544, max is 2400
-
-   write()     - Sets the servo angle in degrees.  (invalid angle that is valid as pulse in microseconds is treated as microseconds)
-   writeMicroseconds() - Sets the servo pulse width in microseconds
-   read()      - Gets the last written servo pulse width as an angle between 0 and 180.
-   readMicroseconds()   - Gets the last written servo pulse width in microseconds. (was read_us() in first release)
-   attached()  - Returns true if there is a servo attached.
-   detach()    - Stops an attached servos from pulsing its i/o pin.
- */
-
-#ifndef Servo_h
-#define Servo_h
-
-#include <inttypes.h>
-
-/*
- * Defines for 16 bit timers used with  Servo library
- *
- * If _useTimerX is defined then TimerX is a 16 bit timer on the curent board
- * timer16_Sequence_t enumerates the sequence that the timers should be allocated
- * _Nbr_16timers indicates how many 16 bit timers are available.
- *
- */
-
-// Say which 16 bit timers can be used and in what order
-#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-#define _useTimer5
-//#define _useTimer1
-#define _useTimer3
-#define _useTimer4
-//typedef enum { _timer5, _timer1, _timer3, _timer4, _Nbr_16timers } timer16_Sequence_t ;
-typedef enum { _timer5, _timer3, _timer4, _Nbr_16timers } timer16_Sequence_t ;
-
-#elif defined(__AVR_ATmega32U4__)
-//#define _useTimer1
-#define _useTimer3
-//typedef enum { _timer1, _Nbr_16timers } timer16_Sequence_t ;
-typedef enum { _timer3, _Nbr_16timers } timer16_Sequence_t ;
-
-#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__)
-#define _useTimer3
-//#define _useTimer1
-//typedef enum { _timer3, _timer1, _Nbr_16timers } timer16_Sequence_t ;
-typedef enum { _timer3, _Nbr_16timers } timer16_Sequence_t ;
-
-#elif defined(__AVR_ATmega128__) ||defined(__AVR_ATmega1281__) || defined(__AVR_ATmega1284P__) ||defined(__AVR_ATmega2561__)
-#define _useTimer3
-//#define _useTimer1
-//typedef enum { _timer3, _timer1, _Nbr_16timers } timer16_Sequence_t ;
-typedef enum { _timer3, _Nbr_16timers } timer16_Sequence_t ;
-
-#else  // everything else
-//#define _useTimer1
-//typedef enum { _timer1, _Nbr_16timers } timer16_Sequence_t ;
-typedef enum { _Nbr_16timers } timer16_Sequence_t ;
-#endif
-
-#define Servo_VERSION           2      // software version of this library
-
-#define MIN_PULSE_WIDTH       544     // the shortest pulse sent to a servo
-#define MAX_PULSE_WIDTH      2400     // the longest pulse sent to a servo
-#define DEFAULT_PULSE_WIDTH  1500     // default pulse width when servo is attached
-#define REFRESH_INTERVAL    20000     // minumim time to refresh servos in microseconds
-
-#define SERVOS_PER_TIMER       12     // the maximum number of servos controlled by one timer
-#define MAX_SERVOS   (_Nbr_16timers  * SERVOS_PER_TIMER)
-
-#define INVALID_SERVO         255     // flag indicating an invalid servo index
-
-typedef struct  {
-  uint8_t nbr        :6 ;             // a pin number from 0 to 63
-  uint8_t isActive   :1 ;             // true if this channel is enabled, pin not pulsed if false
-} ServoPin_t   ;
-
-typedef struct {
-  ServoPin_t Pin;
-  unsigned int ticks;
-} servo_t;
-
-class Servo
-{
-public:
-  Servo();
-  uint8_t attach(int pin);           // attach the given pin to the next free channel, sets pinMode, returns channel number or 0 if failure
-  uint8_t attach(int pin, int min, int max); // as above but also sets min and max values for writes.
-  void detach();
-  void write(int value);             // if value is < 200 its treated as an angle, otherwise as pulse width in microseconds
-  void writeMicroseconds(int value); // Write pulse width in microseconds
-  int read();                        // returns current pulse width as an angle between 0 and 180 degrees
-  int readMicroseconds();            // returns current pulse width in microseconds for this servo (was read_us() in first release)
-  bool attached();                   // return true if this servo is attached, otherwise false
-#if defined (ENABLE_AUTO_BED_LEVELING) && (PROBE_SERVO_DEACTIVATION_DELAY > 0)
-  int pin;                           // store the hw pin of the servo
-#endif
-private:
-   uint8_t servoIndex;               // index into the channel data for this servo
-   int8_t min;                       // minimum is this value times 4 added to MIN_PULSE_WIDTH
-   int8_t max;                       // maximum is this value times 4 added to MAX_PULSE_WIDTH
-};
-
-#endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/Version.h

@@ -0,0 +1,94 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * This file is the standard Marlin version identifier file, all fields can be
+ * overriden by the ones defined on _Version.h by using the Configuration.h
+ * directive USE_AUTOMATIC_VERSIONING.
+ */
+
+#if ENABLED(USE_AUTOMATIC_VERSIONING)
+
+  #include "_Version.h"
+
+#else
+
+  /**
+   * Marlin release version identifier
+   */
+  #define SHORT_BUILD_VERSION "1.1.6.1"
+
+  /**
+   * Verbose version identifier which should contain a reference to the location
+   * from where the binary was downloaded or the source code was compiled.
+   */
+  #define DETAILED_BUILD_VERSION "Creality 3D"
+
+  /**
+   * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
+   * here we define this default string as the date where the latest release
+   * version was tagged.
+   */
+  #define STRING_DISTRIBUTION_DATE "2018-11-28"
+
+  /**
+   * Required minimum Configuration.h and Configuration_adv.h file versions.
+   *
+   * You must increment this version number for every significant change such as,
+   * but not limited to: ADD, DELETE RENAME OR REPURPOSE any directive/option on
+   * the configuration files.
+   */
+  #define REQUIRED_CONFIGURATION_H_VERSION 010100
+  #define REQUIRED_CONFIGURATION_ADV_H_VERSION 010100
+
+  /**
+   * The protocol for communication to the host. Protocol indicates communication
+   * standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
+   * (Other behaviors are given by the firmware version and capabilities report.)
+   */
+  #define PROTOCOL_VERSION "1.0"
+
+  /**
+   * Defines a generic printer name to be output to the LCD after booting Marlin.
+   */
+  #define MACHINE_NAME "3D Printer"
+
+  /**
+   * The SOURCE_CODE_URL is the location where users will find the Marlin Source
+   * Code which is installed on the device. In most cases —unless the manufacturer
+   * has a distinct Github fork— the Source Code URL should just be the main
+   * Marlin repository.
+   */
+  #define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin"
+
+  /**
+   * Default generic printer UUID.
+   */
+  #define DEFAULT_MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff"
+
+  /**
+   * The WEBSITE_URL is the location where users can get more information such as
+   * documentation about a specific Marlin release.
+   */
+  #define WEBSITE_URL "www.creality3d.cn"
+
+#endif // USE_AUTOMATIC_VERSIONING

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/blinkm.cpp

@@ -0,0 +1,46 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * blinkm.cpp - Library for controlling a BlinkM over i2c
+ * Created by Tim Koster, August 21 2013.
+ */
+
+#include "Marlin.h"
+
+#if ENABLED(BLINKM)
+
+#include "blinkm.h"
+
+void SendColors(byte red, byte grn, byte blu) {
+  Wire.begin();
+  Wire.beginTransmission(0x09);
+  Wire.write('o');                    //to disable ongoing script, only needs to be used once
+  Wire.write('n');
+  Wire.write(red);
+  Wire.write(grn);
+  Wire.write(blu);
+  Wire.endTransmission();
+}
+
+#endif // BLINKM
+

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/blinkm.h

@@ -0,0 +1,31 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * blinkm.h - Library for controlling a BlinkM over i2c
+ * Created by Tim Koster, August 21 2013.
+ */
+
+#include "Arduino.h"
+#include "Wire.h"
+
+void SendColors(byte red, byte grn, byte blu);

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/boards.h

@@ -0,0 +1,106 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef BOARDS_H
+#define BOARDS_H
+
+#define BOARD_UNKNOWN -1
+
+#define BOARD_GEN7_CUSTOM       10   // Gen7 custom (Alfons3 Version) "https://github.com/Alfons3/Generation_7_Electronics"
+#define BOARD_GEN7_12           11   // Gen7 v1.1, v1.2
+#define BOARD_GEN7_13           12   // Gen7 v1.3
+#define BOARD_GEN7_14           13   // Gen7 v1.4
+#define BOARD_CNCONTROLS_11     111  // Cartesio CN Controls V11
+#define BOARD_CNCONTROLS_12     112  // Cartesio CN Controls V12
+#define BOARD_CHEAPTRONIC       2    // Cheaptronic v1.0
+#define BOARD_CHEAPTRONIC_V2    21   // Cheaptronic v2.0
+#define BOARD_SETHI             20   // Sethi 3D_1
+#define BOARD_MIGHTYBOARD_REVE  200  // Makerbot Mightyboard Revision E
+#define BOARD_RAMPS_OLD         3    // MEGA/RAMPS up to 1.2
+#define BOARD_RAMPS_13_EFB      33   // RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
+#define BOARD_RAMPS_13_EEB      34   // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
+#define BOARD_RAMPS_13_EFF      35   // RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
+#define BOARD_RAMPS_13_EEF      36   // RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
+#define BOARD_RAMPS_13_SF       38   // RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
+#define BOARD_FELIX2            37   // Felix 2.0+ Electronics Board (RAMPS like)
+#define BOARD_RIGIDBOARD        42   // Invent-A-Part RigidBoard
+#define BOARD_RIGIDBOARD_V2     52   // Invent-A-Part RigidBoard V2
+#define BOARD_RAMPS_14_EFB      43   // RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
+#define BOARD_RAMPS_14_EEB      44   // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
+#define BOARD_RAMPS_14_EFF      45   // RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
+#define BOARD_RAMPS_14_EEF      46   // RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
+#define BOARD_RAMPS_14_SF       48   // RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
+#define BOARD_GEN6              5    // Gen6
+#define BOARD_GEN6_DELUXE       51   // Gen6 deluxe
+#define BOARD_SANGUINOLOLU_11   6    // Sanguinololu < 1.2
+#define BOARD_SANGUINOLOLU_12   62   // Sanguinololu 1.2 and above
+#define BOARD_MELZI             63   // Melzi
+#define BOARD_MELZI_MAKR3D      66   // Melzi with ATmega1284 (MaKr3d version)
+#define BOARD_MELZI_CREALITY    89   // Melzi Creality3D board (for CR-10 etc)
+#define BOARD_STB_11            64   // STB V1.1
+#define BOARD_AZTEEG_X1         65   // Azteeg X1
+#define BOARD_AZTEEG_X3         67   // Azteeg X3
+#define BOARD_AZTEEG_X3_PRO     68   // Azteeg X3 Pro
+#define BOARD_ANET_10           69   // Anet 1.0 (Melzi clone)
+#define BOARD_ULTIMAKER         7    // Ultimaker
+#define BOARD_ULTIMAKER_OLD     71   // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+#define BOARD_ULTIMAIN_2        72   // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
+#define BOARD_GT2560_REV_A      74   // Geeetech GT2560 Rev. A
+#define BOARD_GT2560_REV_A_PLUS 75   // Geeetech GT2560 Rev. A+ (with auto level probe)
+#define BOARD_3DRAG             77   // 3Drag Controller
+#define BOARD_K8200             78   // Velleman K8200 Controller (derived from 3Drag Controller)
+#define BOARD_K8400             79   // Velleman K8400 Controller (derived from 3Drag Controller)
+#define BOARD_TEENSYLU          8    // Teensylu
+#define BOARD_RUMBA             80   // Rumba
+#define BOARD_PRINTRBOARD       81   // Printrboard (AT90USB1286)
+#define BOARD_PRINTRBOARD_REVF  811  // Printrboard Revision F (AT90USB1286)
+#define BOARD_BRAINWAVE         82   // Brainwave (AT90USB646)
+#define BOARD_SAV_MKI           83   // SAV Mk-I (AT90USB1286)
+#define BOARD_TEENSY2           84   // Teensy++2.0 (AT90USB1286) - CLI compile: HARDWARE_MOTHERBOARD=84  make
+#define BOARD_BRAINWAVE_PRO     85   // Brainwave Pro (AT90USB1286)
+#define BOARD_GEN3_PLUS         9    // Gen3+
+#define BOARD_GEN3_MONOLITHIC   22   // Gen3 Monolithic Electronics
+#define BOARD_MEGATRONICS       70   // Megatronics
+#define BOARD_MEGATRONICS_2     701  // Megatronics v2.0
+#define BOARD_MINITRONICS       702  // Minitronics v1.0/1.1
+#define BOARD_MEGATRONICS_3     703  // Megatronics v3.0
+#define BOARD_MEGATRONICS_31    704  // Megatronics v3.1
+#define BOARD_OMCA_A            90   // Alpha OMCA board
+#define BOARD_OMCA              91   // Final OMCA board
+#define BOARD_RAMBO             301  // Rambo
+#define BOARD_MINIRAMBO         302  // Mini-Rambo
+#define BOARD_SCOOVO_X9H        303  // abee Scoovo X9H
+#define BOARD_MEGACONTROLLER    310  // Mega controller
+#define BOARD_ELEFU_3           21   // Elefu Ra Board (v3)
+#define BOARD_5DPRINT           88   // 5DPrint D8 Driver Board
+#define BOARD_LEAPFROG          999  // Leapfrog
+#define BOARD_MKS_BASE          40   // MKS BASE 1.0
+#define BOARD_MKS_13            47   // MKS v1.3 or 1.4 (maybe higher)
+#define BOARD_SAINSMART_2IN1    49   // Sainsmart 2-in-1 board
+#define BOARD_BAM_DICE          401  // 2PrintBeta BAM&DICE with STK drivers
+#define BOARD_BAM_DICE_DUE      402  // 2PrintBeta BAM&DICE Due with STK drivers
+#define BOARD_BQ_ZUM_MEGA_3D    503  // bq ZUM Mega 3D
+#define BOARD_ZRIB_V20          504  // zrib V2.0 control board (Chinese knock off RAMPS replica)
+
+#define MB(board) (MOTHERBOARD==BOARD_##board)
+
+#endif // __BOARDS_H

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/buzzer.h

@@ -0,0 +1,146 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __BUZZER_H__
+#define __BUZZER_H__
+
+#include "types.h"
+#include "fastio.h"
+#include "circularqueue.h"
+#include "temperature.h"
+
+#include "MarlinConfig.h"
+
+#define TONE_QUEUE_LENGTH 4
+
+/**
+ * @brief Tone structure
+ * @details Simple abstraction of a tone based on a duration and a frequency.
+ */
+struct tone_t {
+  uint16_t duration;
+  uint16_t frequency;
+};
+
+/**
+ * @brief Buzzer class
+ */
+class Buzzer {
+  private:
+    struct state_t {
+      tone_t   tone;
+      uint32_t endtime;
+    } state;
+
+  protected:
+    CircularQueue<tone_t, TONE_QUEUE_LENGTH> buffer;
+
+    /**
+     * @brief Inverts the sate of a digital PIN
+     * @details This will invert the current state of an digital IO pin.
+     */
+    void invert() {
+      TOGGLE(BEEPER_PIN);
+    }
+
+    /**
+     * @brief Turn off a digital PIN
+     * @details Alias of digitalWrite(PIN, LOW) using FastIO
+     */
+    void off() {
+      WRITE(BEEPER_PIN, LOW);
+    }
+
+    /**
+     * @brief Turn on a digital PIN
+     * @details Alias of digitalWrite(PIN, HIGH) using FastIO
+     */
+    void on() {
+      WRITE(BEEPER_PIN, HIGH);
+    }
+
+    /**
+     * @brief Resets the state of the class
+     * @details Brings the class state to a known one.
+     */
+    void reset() {
+      this->off();
+      this->state.endtime = 0;
+    }
+
+  public:
+    /**
+     * @brief Class constructor
+     */
+    Buzzer() {
+      SET_OUTPUT(BEEPER_PIN);
+      this->reset();
+    }
+
+    /**
+     * @brief Add a tone to the queue
+     * @details Adds a tone_t structure to the ring buffer, will block IO if the
+     *          queue is full waiting for one slot to get available.
+     *
+     * @param duration Duration of the tone in milliseconds
+     * @param frequency Frequency of the tone in hertz
+     */
+    void tone(const uint16_t &duration, const uint16_t &frequency = 0) {
+      while (buffer.isFull()) {
+        this->tick();
+        thermalManager.manage_heater();
+      }
+      tone_t tone = { duration, frequency };
+      this->buffer.enqueue(tone);
+    }
+
+    /**
+     * @brief Loop function
+     * @details This function should be called at loop, it will take care of
+     *          playing the tones in the queue.
+     */
+    virtual void tick() {
+      const millis_t now = millis();
+
+      if (!this->state.endtime) {
+        if (this->buffer.isEmpty()) return;
+
+        this->state.tone = this->buffer.dequeue();
+        this->state.endtime = now + this->state.tone.duration;
+
+        if (this->state.tone.frequency > 0) {
+          #if ENABLED(SPEAKER)
+            CRITICAL_SECTION_START;
+            ::tone(BEEPER_PIN, this->state.tone.frequency, this->state.tone.duration);
+            CRITICAL_SECTION_END;
+          #else
+            this->on();
+          #endif
+        }
+      }
+      else if (ELAPSED(now, this->state.endtime)) this->reset();
+    }
+};
+
+extern Buzzer buzzer;
+
+#endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/cardreader.h

@@ -1,121 +1,208 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
 #ifndef CARDREADER_H
 #define CARDREADER_H
 
-#ifdef SDSUPPORT
+#include "MarlinConfig.h"
+
+#if ENABLED(SDSUPPORT)
 
-#define MAX_DIR_DEPTH 10
+#define MAX_DIR_DEPTH 10          // Maximum folder depth
 
 #include "SdFile.h"
-enum LsAction {LS_SerialPrint,LS_Count,LS_GetFilename};
-class CardReader
-{
+
+#include "types.h"
+#include "enum.h"
+
+class CardReader {
 public:
   CardReader();
-  
+
   void initsd();
   void write_command(char *buf);
   //files auto[0-9].g on the sd card are performed in a row
   //this is to delay autostart and hence the initialisaiton of the sd card to some seconds after the normal init, so the device is available quick after a reset
 
-  void checkautostart(bool x); 
-  void openFile(char* name,bool read,bool replace_current=true);
+  void checkautostart(bool x);
+  void openFile(char* name, bool read, bool push_current=false);
   void openLogFile(char* name);
-  #if defined(SDSUPPORT) && defined(POWEROFF_SAVE_SD_FILE)
-  void openPowerOffFile(char* name, uint8_t oflag);
-  void closePowerOffFile();
-  bool existPowerOffFile(char* name);
-  int16_t savePowerOffInfo(const void* data, uint16_t size);
-  int16_t getPowerOffInfo(void* data, uint16_t size);
-  void removePowerOffFile();
+  #if ENABLED(POWEROFF_SAVE_SD_FILE)
+    void openPowerOffFile(char* name, uint8_t oflag);
+    void closePowerOffFile();
+    bool existPowerOffFile(char* name);
+    int16_t savePowerOffInfo(const void* data, uint16_t size);
+    int16_t getPowerOffInfo(void* data, uint16_t size);
+    void removePowerOffFile();
   #endif
   void removeFile(char* name);
   void closefile(bool store_location=false);
   void release();
+  void openAndPrintFile(const char *name);
   void startFileprint();
-  void pauseSDPrint();
+  void stopSDPrint();
   void getStatus();
   void printingHasFinished();
 
-  void getfilename(const uint8_t nr);
+  #if ENABLED(LONG_FILENAME_HOST_SUPPORT)
+    void printLongPath(char *path);
+  #endif
+
+  void getfilename(uint16_t nr, const char* const match=NULL);
   uint16_t getnrfilenames();
-  
+
   void getAbsFilename(char *t);
-  
 
   void ls();
-  void chdir(const char * relpath);
+  void chdir(const char *relpath);
   void updir();
   void setroot();
 
+  #if ENABLED(SDCARD_SORT_ALPHA)
+    void presort();
+    void getfilename_sorted(const uint16_t nr);
+    #if ENABLED(SDSORT_GCODE)
+      FORCE_INLINE void setSortOn(bool b) { sort_alpha = b; presort(); }
+      FORCE_INLINE void setSortFolders(int i) { sort_folders = i; presort(); }
+      //FORCE_INLINE void setSortReverse(bool b) { sort_reverse = b; }
+    #endif
+  #endif
 
+  FORCE_INLINE void pauseSDPrint() { sdprinting = false; }
   FORCE_INLINE bool isFileOpen() { return file.isOpen(); }
-  FORCE_INLINE bool eof() { return sdpos>=filesize ;};
-  FORCE_INLINE int16_t get() {  sdpos = file.curPosition();return (int16_t)file.read();};
-  FORCE_INLINE void setIndex(long index) {sdpos = index;file.seekSet(index);};
+  FORCE_INLINE bool eof() { return sdpos >= filesize; }
+  FORCE_INLINE int16_t get() { sdpos = file.curPosition(); return (int16_t)file.read(); }
+  FORCE_INLINE void setIndex(long index) { sdpos = index; file.seekSet(index); }
   FORCE_INLINE uint32_t getIndex() { return sdpos; }
-  FORCE_INLINE uint8_t percentDone(){if(!isFileOpen()) return 0; if(filesize) return sdpos/((filesize+99)/100); else return 0;};
-  FORCE_INLINE char* getWorkDirName(){workDir.getFilename(filename);return filename;};
+  // FORCE_INLINE char* getCurrentPrintFileName() { return filenames[file_subcall_ctr]; }
+  FORCE_INLINE uint8_t percentDone() { return (isFileOpen() && filesize) ? sdpos / ((filesize + 99) / 100) : 0; }
+  FORCE_INLINE char* getWorkDirName() { workDir.getFilename(filename); return filename; }
 
 public:
-  bool saving;
-  bool logging;
-  bool sdprinting ;  
-  bool cardOK ;
-  char filename[13];
-  char longFilename[LONG_FILENAME_LENGTH];
-  bool filenameIsDir;
-  int lastnr; //last number of the autostart;
+  bool saving, logging, sdprinting, cardOK, filenameIsDir;
+  char filename[FILENAME_LENGTH], longFilename[LONG_FILENAME_LENGTH];
+  int autostart_index;
 private:
-  SdFile root,*curDir,workDir,workDirParents[MAX_DIR_DEPTH];
-  uint16_t workDirDepth;
+  SdFile root, *curDir, workDir, workDirParents[MAX_DIR_DEPTH];
+  uint8_t workDirDepth;
+
+  // Sort files and folders alphabetically.
+  #if ENABLED(SDCARD_SORT_ALPHA)
+    uint16_t sort_count;        // Count of sorted items in the current directory
+    #if ENABLED(SDSORT_GCODE)
+      bool sort_alpha;          // Flag to enable / disable the feature
+      int sort_folders;         // Flag to enable / disable folder sorting
+      //bool sort_reverse;      // Flag to enable / disable reverse sorting
+    #endif
+
+    // By default the sort index is static
+    #if ENABLED(SDSORT_DYNAMIC_RAM)
+      uint8_t *sort_order;
+    #else
+      uint8_t sort_order[SDSORT_LIMIT];
+    #endif
+
+    // Cache filenames to speed up SD menus.
+    #if ENABLED(SDSORT_USES_RAM)
+
+      // If using dynamic ram for names, allocate on the heap.
+      #if ENABLED(SDSORT_CACHE_NAMES)
+        #if ENABLED(SDSORT_DYNAMIC_RAM)
+          char **sortshort, **sortnames;
+        #else
+          char sortshort[SDSORT_LIMIT][FILENAME_LENGTH];
+          char sortnames[SDSORT_LIMIT][LONG_FILENAME_LENGTH];
+        #endif
+      #elif DISABLED(SDSORT_USES_STACK)
+        char sortnames[SDSORT_LIMIT][LONG_FILENAME_LENGTH];
+      #endif
+
+      // Folder sorting uses an isDir array when caching items.
+      #if HAS_FOLDER_SORTING
+        #if ENABLED(SDSORT_DYNAMIC_RAM)
+          uint8_t *isDir;
+        #elif ENABLED(SDSORT_CACHE_NAMES) || DISABLED(SDSORT_USES_STACK)
+          uint8_t isDir[(SDSORT_LIMIT+7)>>3];
+        #endif
+      #endif
+
+    #endif // SDSORT_USES_RAM
+
+  #endif // SDCARD_SORT_ALPHA
+
   Sd2Card card;
   SdVolume volume;
   SdFile file;
-  #if defined(SDSUPPORT) && defined(POWEROFF_SAVE_SD_FILE)
-  SdFile powerOffFile;
+  #if ENABLED(POWEROFF_SAVE_SD_FILE)
+    SdFile powerOffFile;
   #endif
+
   #define SD_PROCEDURE_DEPTH 1
-  #define MAXPATHNAMELENGTH (13*MAX_DIR_DEPTH+MAX_DIR_DEPTH+1)
+  #define MAXPATHNAMELENGTH (FILENAME_LENGTH*MAX_DIR_DEPTH + MAX_DIR_DEPTH + 1)
   uint8_t file_subcall_ctr;
   uint32_t filespos[SD_PROCEDURE_DEPTH];
-  char filenames[SD_PROCEDURE_DEPTH][MAXPATHNAMELENGTH];
+  char proc_filenames[SD_PROCEDURE_DEPTH][MAXPATHNAMELENGTH];
   uint32_t filesize;
-  //int16_t n;
-  unsigned long autostart_atmillis;
-  uint32_t sdpos ;
+  uint32_t sdpos;
 
+  millis_t next_autostart_ms;
   bool autostart_stilltocheck; //the sd start is delayed, because otherwise the serial cannot answer fast enought to make contact with the hostsoftware.
-  
+
   LsAction lsAction; //stored for recursion.
-  int16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
+  uint16_t nrFiles; //counter for the files in the current directory and recycled as position counter for getting the nrFiles'th name in the directory.
   char* diveDirName;
-  void lsDive(const char *prepend,SdFile parent);
+  void lsDive(const char *prepend, SdFile parent, const char * const match=NULL);
+
+  #if ENABLED(SDCARD_SORT_ALPHA)
+    void flush_presort();
+  #endif
 };
+
 extern CardReader card;
-#if defined(SDSUPPORT) && defined(POWEROFF_SAVE_SD_FILE)
-struct power_off_info_t {
+#if ENABLED(POWEROFF_SAVE_SD_FILE)
+struct power_off_info_t
+{
   /* header (1B + 7B = 8B) */
   uint8_t valid_head;
-  //uint8_t reserved1[8-1];
+  // uint8_t reserved1[8-1];
   /* Gcode related information. (44B + 20B = 64B) */
   float current_position[NUM_AXIS];
   float feedrate;
   float saved_z;
-  int target_temperature[4];
+  int target_temperature[HOTENDS];
   int target_temperature_bed;
-  //uint8_t reserved2[64-44];
+  // uint8_t reserved2[64-44];
   /* print queue related information. (396B + 116B = 512B) */
   int cmd_queue_index_r;
   int cmd_queue_index_w;
   int commands_in_queue;
   char command_queue[BUFSIZE][MAX_CMD_SIZE];
-  //uint8_t reserved3[512-396];
+  // uint8_t reserved3[512-396];
   /* SD card related information. (165B + 91B = 256B)*/
   uint32_t sdpos;
   millis_t print_job_start_ms;
   char sd_filename[MAXPATHNAMELENGTH];
   char power_off_filename[16];
-  //uint8_t reserved4[256-166];
+  // uint8_t reserved4[256-166];
   uint8_t valid_foot;
 };
 
@@ -123,22 +210,26 @@ extern struct power_off_info_t power_off_info;
 extern int power_off_commands_count;
 extern int power_off_type_yes;
 #endif
+
 #define IS_SD_PRINTING (card.sdprinting)
+#define IS_SD_FILE_OPEN (card.isFileOpen())
 
-#if (SDCARDDETECT > -1)
-# ifdef SDCARDDETECTINVERTED 
-#  define IS_SD_INSERTED (READ(SDCARDDETECT)!=0)
-# else
-#  define IS_SD_INSERTED (READ(SDCARDDETECT)==0)
-# endif //SDCARDTETECTINVERTED
+#if PIN_EXISTS(SD_DETECT)
+  #if ENABLED(SD_DETECT_INVERTED)
+    #define IS_SD_INSERTED (READ(SD_DETECT_PIN) != 0)
+  #else
+    #define IS_SD_INSERTED (READ(SD_DETECT_PIN) == 0)
+  #endif
 #else
-//If we don't have a card detect line, aways asume the card is inserted
-# define IS_SD_INSERTED true
+  //No card detect line? Assume the card is inserted.
+  #define IS_SD_INSERTED true
 #endif
 
 #else
 
 #define IS_SD_PRINTING (false)
+#define IS_SD_FILE_OPEN (false)
 
-#endif //SDSUPPORT
-#endif
+#endif // SDSUPPORT
+
+#endif // __CARDREADER_H

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/circularqueue.h

@@ -0,0 +1,145 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __CIRCULARQUEUE_H__
+#define __CIRCULARQUEUE_H__
+
+#include <Arduino.h>
+
+/**
+ * @brief   Circular Queue class
+ * @details Implementation of the classic ring buffer data structure
+ */
+template<typename T, uint8_t N>
+class CircularQueue {
+  private:
+
+    /**
+     * @brief   Buffer structure
+     * @details This structure consolidates all the overhead required to handle
+     *          a circular queue such as the pointers and the buffer vector.
+     */
+    struct buffer_t {
+      uint8_t head;
+      uint8_t tail;
+      uint8_t count;
+      uint8_t size;
+      T queue[N];
+    } buffer;
+
+  public:
+    /**
+     * @brief   Class constructor
+     * @details This class requires two template parameters, T defines the type
+     *          of item this queue will handle and N defines the maximum number of
+     *          items that can be stored on the queue.
+     */
+    CircularQueue<T, N>() {
+      this->buffer.size = N;
+      this->buffer.count = this->buffer.head = this->buffer.tail = 0;
+    }
+
+    /**
+     * @brief   Removes and returns a item from the queue
+     * @details Removes the oldest item on the queue, pointed to by the
+     *          buffer_t head field. The item is returned to the caller.
+     * @return  type T item
+     */
+    T dequeue() {
+      if (this->isEmpty()) return T();
+
+      uint8_t index = this->buffer.head;
+
+      --this->buffer.count;
+      if (++this->buffer.head == this->buffer.size)
+        this->buffer.head = 0;
+
+      return this->buffer.queue[index];
+    }
+
+    /**
+     * @brief   Adds an item to the queue
+     * @details Adds an item to the queue on the location pointed by the buffer_t
+     *          tail variable. Returns false if no queue space is available.
+     * @param   item Item to be added to the queue
+     * @return  true if the operation was successful
+     */
+    bool enqueue(T const &item) {
+      if (this->isFull()) return false;
+
+      this->buffer.queue[this->buffer.tail] = item;
+
+      ++this->buffer.count;
+      if (++this->buffer.tail == this->buffer.size)
+        this->buffer.tail = 0;
+
+      return true;
+    }
+
+    /**
+     * @brief   Checks if the queue has no items
+     * @details Returns true if there are no items on the queue, false otherwise.
+     * @return  true if queue is empty
+     */
+    bool isEmpty() {
+      return this->buffer.count == 0;
+    }
+
+    /**
+     * @brief   Checks if the queue is full
+     * @details Returns true if the queue is full, false otherwise.
+     * @return  true if queue is full
+     */
+    bool isFull() {
+      return this->buffer.count == this->buffer.size;
+    }
+
+    /**
+     * @brief   Gets the queue size
+     * @details Returns the maximum number of items a queue can have.
+     * @return  the queue size
+     */
+    uint8_t size() {
+      return this->buffer.size;
+    }
+
+    /**
+     * @brief   Gets the next item from the queue without removing it
+     * @details Returns the next item in the queue without removing it
+     *          or updating the pointers.
+     * @return  first item in the queue
+     */
+    T peek() {
+      return this->buffer.queue[this->buffer.head];
+    }
+
+    /**
+     * @brief Gets the number of items on the queue
+     * @details Returns the current number of items stored on the queue.
+     * @return number of items in the queue
+     */
+    uint8_t count() {
+      return this->buffer.count;
+    }
+};
+
+#endif

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/configuration_store.h

@@ -0,0 +1,82 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef CONFIGURATION_STORE_H
+#define CONFIGURATION_STORE_H
+
+#include "MarlinConfig.h"
+
+class MarlinSettings {
+  public:
+    MarlinSettings() { }
+
+    static void reset();
+    static bool save();
+
+    #if ENABLED(EEPROM_SETTINGS)
+      static bool load();
+
+      #if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system
+                                         // That can store is enabled
+        FORCE_INLINE static int get_start_of_meshes() { return meshes_begin; }
+        FORCE_INLINE static int get_end_of_meshes() { return meshes_end; }
+        static int calc_num_meshes();
+        static void store_mesh(int8_t slot);
+        static void load_mesh(int8_t slot, void *into = 0);
+
+        //static void delete_mesh();    // necessary if we have a MAT
+        //static void defrag_meshes();  // "
+      #endif
+    #else
+      FORCE_INLINE
+      static bool load() { reset(); report(); return true; }
+    #endif
+
+    #if DISABLED(DISABLE_M503)
+      static void report(bool forReplay=false);
+    #else
+      FORCE_INLINE
+      static void report(bool forReplay=false) { UNUSED(forReplay); }
+    #endif
+
+  private:
+    static void postprocess();
+
+    #if ENABLED(EEPROM_SETTINGS)
+      static bool eeprom_error;
+
+      #if ENABLED(AUTO_BED_LEVELING_UBL) // Eventually make these available if any leveling system
+                                         // That can store is enabled
+        static int meshes_begin;
+        const static int meshes_end = E2END - 128; // 128 is a placeholder for the size of the MAT; the MAT will always
+                                                   // live at the very end of the eeprom
+
+      #endif
+
+      static void write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc);
+      static void read_data(int &pos, uint8_t *value, uint16_t size, uint16_t *crc);
+    #endif
+};
+
+extern MarlinSettings settings;
+
+#endif // CONFIGURATION_STORE_H

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/createTemperatureLookupMarlin.py

@@ -1,155 +0,0 @@
-#!/usr/bin/python
-#
-# Creates a C code lookup table for doing ADC to temperature conversion
-# on a microcontroller
-# based on: http://hydraraptor.blogspot.com/2007/10/measuring-temperature-easy-way.html
-"""Thermistor Value Lookup Table Generator
-
-Generates lookup to temperature values for use in a microcontroller in C format based on: 
-http://hydraraptor.blogspot.com/2007/10/measuring-temperature-easy-way.html
-
-The main use is for Arduino programs that read data from the circuit board described here:
-http://make.rrrf.org/ts-1.0
-
-Usage: python createTemperatureLookup.py [options]
-
-Options:
-  -h, --help        show this help
-  --rp=...          pull-up resistor
-  --t0=ttt:rrr      low temperature temperature:resistance point (around 25C)
-  --t1=ttt:rrr      middle temperature temperature:resistance point (around 150C)
-  --t2=ttt:rrr      high temperature temperature:resistance point (around 250C)
-  --num-temps=...   the number of temperature points to calculate (default: 20)
-"""
-
-from math import *
-import sys
-import getopt
-
-class Thermistor:
-    "Class to do the thermistor maths"
-    def __init__(self, rp, t1, r1, t2, r2, t3, r3):
-        t1 = t1 + 273.15               # low temperature (25C)
-        r1 = r1                        # resistance at low temperature
-        t2 = t2 + 273.15               # middle temperature (150C)
-        r2 = r2                        # resistance at middle temperature
-        t3 = t3 + 273.15               # high temperature (250C)
-        r3 = r3                        # resistance at high temperature
-        self.rp = rp                   # pull-up resistance
-        self.vadc = 5.0                # ADC reference
-        self.vcc = 5.0                 # supply voltage to potential divider
-        a1 = log(r1)
-        a2 = log(r2)
-        a3 = log(r3)
-        z = a1 - a2
-        y = a1 - a3
-        x = 1/t1 - 1/t2
-        w = 1/t1 - 1/t3
-        v = pow(a1,3) - pow(a2,3)
-        u = pow(a1,3) - pow(a3,3)
-        c3 = (x-z*w/y)/(v-z*u/y)
-        c2 = (x-c3*v)/z
-        c1 = 1/t1-c3*pow(a1,3)-c2*a1
-        self.c1 = c1
-        self.c2 = c2
-        self.c3 = c3
-
-    def res(self,adc):
-        "Convert ADC reading into a resolution"
-        res = self.temp(adc)-self.temp(adc+1)
-        return res
-
-    def v(self,adc):
-        "Convert ADC reading into a Voltage"
-        v = adc * self.vadc / (1024 )   # convert the 10 bit ADC value to a voltage
-        return v
-
-    def r(self,adc):
-        "Convert ADC reading into a resistance in Ohms"
-        v = adc * self.vadc / (1024 )   # convert the 10 bit ADC value to a voltage
-        r = self.rp * v / (self.vcc - v)    # resistance of thermistor
-        return r
-
-    def temp(self,adc):
-        "Convert ADC reading into a temperature in Celcius"
-        v = adc * self.vadc / (1024 )   # convert the 10 bit ADC value to a voltage
-        r = self.rp * v / (self.vcc - v)    # resistance of thermistor
-        lnr = log(r)
-        Tinv = self.c1 + (self.c2*lnr) + (self.c3*pow(lnr,3))
-        return (1/Tinv) - 273.15        # temperature
-
-    def adc(self,temp):
-        "Convert temperature into a ADC reading"
-        y = (self.c1 - (1/(temp+273.15))) / (2*self.c3)
-	x = sqrt(pow(self.c2 / (3*self.c3),3) + pow(y,2))
-        r = exp(pow(x-y,1.0/3) - pow(x+y,1.0/3)) # resistance of thermistor
-        return (r / (self.rp + r)) * (1024)
-
-def main(argv):
-
-    rp = 4700;
-    t1 = 25;
-    r1 = 100000;
-    t2 = 150;
-    r2 = 1641.9;
-    t3 = 250;
-    r3 = 226.15;
-    num_temps = int(36);
-    
-    try:
-        opts, args = getopt.getopt(argv, "h", ["help", "rp=", "t1=", "t2=", "t3=", "num-temps="])
-    except getopt.GetoptError:
-        usage()
-        sys.exit(2)
-        
-    for opt, arg in opts:
-        if opt in ("-h", "--help"):
-            usage()
-            sys.exit()
-        elif opt == "--rp":
-            rp = int(arg)
-        elif opt == "--t1":
-            arg =  arg.split(':')
-            t1 = float( arg[0])
-            r1 = float( arg[1])
-        elif opt == "--t2":
-            arg =  arg.split(':')
-            t2 = float( arg[0])
-            r2 = float( arg[1])
-        elif opt == "--t3":
-            arg =  arg.split(':')
-            t3 = float( arg[0])
-            r3 = float( arg[1])
-        elif opt == "--num-temps":
-            num_temps =  int(arg)
-
-    max_adc = (1024 ) - 1
-    min_temp = 0
-    max_temp = 350
-    increment = int(max_adc/(num_temps-1));
-            
-    t = Thermistor(rp, t1, r1, t2, r2, t3, r3)
-    tmp = (min_temp - max_temp) / (num_temps-1)
-    print tmp
-    temps = range(max_temp, min_temp + tmp, tmp);
-
-    print "// Thermistor lookup table for Marlin"
-    print "// ./createTemperatureLookupMarlin.py --rp=%s --t1=%s:%s --t2=%s:%s --t3=%s:%s --num-temps=%s" % (rp, t1, r1, t2, r2, t3, r3, num_temps)
-    print "// Steinhart-Hart Coefficients: %.15g, %.15g,  %.15g " % (t.c1, t.c2, t.c3)
-    print "//#define NUMTEMPS %s" % (len(temps))
-    print "const short temptable[NUMTEMPS][2] PROGMEM = {"
-
-    counter = 0
-    for temp in temps:
-        counter = counter +1
-        if counter == len(temps):
-            print "   {(short)(%.2f*OVERSAMPLENR), %s}  // v=%s r=%s res=%s C/count" % ((t.adc(temp)), temp, t.v(t.adc(temp)), t.r(t.adc(temp)),t.res(t.adc(temp)))
-        else:
-            print "   {(short)(%.2f*OVERSAMPLENR), %s}, // v=%s r=%s res=%s C/count" % ((t.adc(temp)), temp, t.v(t.adc(temp)), t.r(t.adc(temp)),t.res(t.adc(temp)))
-    print "};"
-    
-def usage():
-    print __doc__
-
-if __name__ == "__main__":
-    main(sys.argv[1:])

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/create_speed_lookuptable.py

@@ -1,50 +0,0 @@
-#!/usr/bin/env python
-
-""" Generate the stepper delay lookup table for Marlin firmware. """
-
-import argparse
-
-__author__ = "Ben Gamari <bgamari@gmail.com>"
-__copyright__ = "Copyright 2012, Ben Gamari"
-__license__ = "GPL"
-
-parser = argparse.ArgumentParser(description=__doc__)
-parser.add_argument('-f', '--cpu-freq', type=int, default=16, help='CPU clockrate in MHz (default=16)')
-parser.add_argument('-d', '--divider', type=int, default=8, help='Timer/counter pre-scale divider (default=8)')
-args = parser.parse_args()
-
-cpu_freq = args.cpu_freq * 1000000
-timer_freq = cpu_freq / args.divider
-
-print "#ifndef SPEED_LOOKUPTABLE_H"
-print "#define SPEED_LOOKUPTABLE_H"
-print
-print '#include "Marlin.h"'
-print
-
-print "const uint16_t speed_lookuptable_fast[256][2] PROGMEM = {"
-a = [ timer_freq / ((i*256)+(args.cpu_freq*2)) for i in range(256) ]
-b = [ a[i] - a[i+1] for i in range(255) ]
-b.append(b[-1])
-for i in range(32):
-    print "  ",
-    for j in range(8):
-        print "{%d, %d}," % (a[8*i+j], b[8*i+j]),
-    print 
-print "};"
-print
-
-print "const uint16_t speed_lookuptable_slow[256][2] PROGMEM = {"
-a = [ timer_freq / ((i*8)+(args.cpu_freq*2)) for i in range(256) ]
-b = [ a[i] - a[i+1] for i in range(255) ]
-b.append(b[-1])
-for i in range(32):
-    print "  ",
-    for j in range(8):
-        print "{%d, %d}," % (a[8*i+j], b[8*i+j]),
-    print 
-print "};"
-print
-
-print "#endif"
-

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dac_mcp4728.cpp

@@ -0,0 +1,151 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * mcp4728.cpp - Arduino library for MicroChip MCP4728 I2C D/A converter
+ *
+ * For implementation details, please take a look at the datasheet:
+ * http://ww1.microchip.com/downloads/en/DeviceDoc/22187a.pdf
+ *
+ * For discussion and feedback, please go to:
+ * http://arduino.cc/forum/index.php/topic,51842.0.html
+ */
+
+#include "dac_mcp4728.h"
+#include "enum.h"
+
+#if ENABLED(DAC_STEPPER_CURRENT)
+
+uint16_t mcp4728_values[XYZE];
+
+/**
+ * Begin I2C, get current values (input register and eeprom) of mcp4728
+ */
+void mcp4728_init() {
+  Wire.begin();
+  Wire.requestFrom(int(DAC_DEV_ADDRESS), 24);
+  while (Wire.available()) {
+    char deviceID = Wire.read(),
+         hiByte = Wire.read(),
+         loByte = Wire.read();
+
+    if (!(deviceID & 0x08))
+      mcp4728_values[(deviceID & 0x30) >> 4] = word((hiByte & 0x0F), loByte);
+  }
+}
+
+/**
+ * Write input resister value to specified channel using fastwrite method.
+ * Channel : 0-3, Values : 0-4095
+ */
+uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value) {
+  mcp4728_values[channel] = value;
+  return mcp4728_fastWrite();
+}
+
+/**
+ * Write all input resistor values to EEPROM using SequencialWrite method.
+ * This will update both input register and EEPROM value
+ * This will also write current Vref, PowerDown, Gain settings to EEPROM
+ */
+uint8_t mcp4728_eepromWrite() {
+  Wire.beginTransmission(DAC_DEV_ADDRESS);
+  Wire.write(SEQWRITE);
+  LOOP_XYZE(i) {
+    Wire.write(DAC_STEPPER_VREF << 7 | DAC_STEPPER_GAIN << 4 | highByte(mcp4728_values[i]));
+    Wire.write(lowByte(mcp4728_values[i]));
+  }
+  return Wire.endTransmission();
+}
+
+/**
+ * Write Voltage reference setting to all input regiters
+ */
+uint8_t mcp4728_setVref_all(uint8_t value) {
+  Wire.beginTransmission(DAC_DEV_ADDRESS);
+  Wire.write(VREFWRITE | (value ? 0x0F : 0x00));
+  return Wire.endTransmission();
+}
+/**
+ * Write Gain setting to all input regiters
+ */
+uint8_t mcp4728_setGain_all(uint8_t value) {
+  Wire.beginTransmission(DAC_DEV_ADDRESS);
+  Wire.write(GAINWRITE | (value ? 0x0F : 0x00));
+  return Wire.endTransmission();
+}
+
+/**
+ * Return Input Register value
+ */
+uint16_t mcp4728_getValue(uint8_t channel) { return mcp4728_values[channel]; }
+
+/**
+ * Steph: Might be useful in the future
+ * Return Vout
+ *
+uint16_t mcp4728_getVout(uint8_t channel) {
+  uint32_t vref = 2048,
+           vOut = (vref * mcp4728_values[channel] * (_DAC_STEPPER_GAIN + 1)) / 4096;
+  if (vOut > defaultVDD) vOut = defaultVDD;
+  return vOut;
+}
+*/
+
+/**
+ * Returns DAC values as a 0-100 percentage of drive strength
+ */
+uint8_t mcp4728_getDrvPct(uint8_t channel) { return uint8_t(100.0 * mcp4728_values[channel] / (DAC_STEPPER_MAX) + 0.5); }
+
+/**
+ * Receives all Drive strengths as 0-100 percent values, updates
+ * DAC Values array and calls fastwrite to update the DAC.
+ */
+void mcp4728_setDrvPct(uint8_t pct[XYZE]) {
+  LOOP_XYZE(i) mcp4728_values[i] = 0.01 * pct[i] * (DAC_STEPPER_MAX);
+  mcp4728_fastWrite();
+}
+
+/**
+ * FastWrite input register values - All DAC ouput update. refer to DATASHEET 5.6.1
+ * DAC Input and PowerDown bits update.
+ * No EEPROM update
+ */
+uint8_t mcp4728_fastWrite() {
+  Wire.beginTransmission(DAC_DEV_ADDRESS);
+  LOOP_XYZE(i) {
+    Wire.write(highByte(mcp4728_values[i]));
+    Wire.write(lowByte(mcp4728_values[i]));
+  }
+  return Wire.endTransmission();
+}
+
+/**
+ * Common function for simple general commands
+ */
+uint8_t mcp4728_simpleCommand(byte simpleCommand) {
+  Wire.beginTransmission(GENERALCALL);
+  Wire.write(simpleCommand);
+  return Wire.endTransmission();
+}
+
+#endif // DAC_STEPPER_CURRENT

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dac_mcp4728.h

@@ -0,0 +1,66 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Arduino library for MicroChip MCP4728 I2C D/A converter.
+ */
+
+#ifndef DAC_MCP4728_H
+#define DAC_MCP4728_H
+
+#include "MarlinConfig.h"
+
+#if ENABLED(DAC_STEPPER_CURRENT)
+#include "Wire.h"
+
+#define defaultVDD     DAC_STEPPER_MAX //was 5000 but differs with internal Vref
+#define BASE_ADDR      0x60
+#define RESET          0B00000110
+#define WAKE           0B00001001
+#define UPDATE         0B00001000
+#define MULTIWRITE     0B01000000
+#define SINGLEWRITE    0B01011000
+#define SEQWRITE       0B01010000
+#define VREFWRITE      0B10000000
+#define GAINWRITE      0B11000000
+#define POWERDOWNWRITE 0B10100000
+#define GENERALCALL    0B00000000
+#define GAINWRITE      0B11000000
+
+// This is taken from the original lib, makes it easy to edit if needed
+// DAC_OR_ADDRESS defined in pins_BOARD.h  file
+#define DAC_DEV_ADDRESS (BASE_ADDR | DAC_OR_ADDRESS)
+
+
+void mcp4728_init();
+uint8_t mcp4728_analogWrite(uint8_t channel, uint16_t value);
+uint8_t mcp4728_eepromWrite();
+uint8_t mcp4728_setVref_all(uint8_t value);
+uint8_t mcp4728_setGain_all(uint8_t value);
+uint16_t mcp4728_getValue(uint8_t channel);
+uint8_t mcp4728_fastWrite();
+uint8_t mcp4728_simpleCommand(byte simpleCommand);
+uint8_t mcp4728_getDrvPct(uint8_t channel);
+void mcp4728_setDrvPct(uint8_t pct[XYZE]);
+
+#endif
+#endif // DAC_MCP4728_H

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/digipot_mcp4018.cpp

@@ -0,0 +1,106 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "MarlinConfig.h"
+
+#if ENABLED(DIGIPOT_I2C) && ENABLED(DIGIPOT_MCP4018)
+
+#include "enum.h"
+#include "Stream.h"
+#include "utility/twi.h"
+#include <SlowSoftI2CMaster.h>  //https://github.com/stawel/SlowSoftI2CMaster
+
+// Settings for the I2C based DIGIPOT (MCP4018) based on WT150
+
+#define DIGIPOT_I2C_ADDRESS             0x2F
+
+#define DIGIPOT_A4988_Rsx               0.250
+#define DIGIPOT_A4988_Vrefmax           1.666
+#define DIGIPOT_A4988_MAX_VALUE         127
+
+#define DIGIPOT_A4988_Itripmax(Vref)    ((Vref)/(8.0*DIGIPOT_A4988_Rsx))
+
+#define DIGIPOT_A4988_FACTOR            ((DIGIPOT_A4988_MAX_VALUE)/DIGIPOT_A4988_Itripmax(DIGIPOT_A4988_Vrefmax))
+#define DIGIPOT_A4988_MAX_CURRENT       2.0
+
+static byte current_to_wiper(const float current) {
+  const int16_t value = ceil(float(DIGIPOT_A4988_FACTOR) * current);
+  return byte(constrain(value, 0, DIGIPOT_A4988_MAX_VALUE));
+}
+
+const uint8_t sda_pins[DIGIPOT_I2C_NUM_CHANNELS] = {
+  DIGIPOTS_I2C_SDA_X
+  #if DIGIPOT_I2C_NUM_CHANNELS > 1
+    , DIGIPOTS_I2C_SDA_Y
+    #if DIGIPOT_I2C_NUM_CHANNELS > 2
+      , DIGIPOTS_I2C_SDA_Z
+      #if DIGIPOT_I2C_NUM_CHANNELS > 3
+        , DIGIPOTS_I2C_SDA_E0
+        #if DIGIPOT_I2C_NUM_CHANNELS > 4
+          , DIGIPOTS_I2C_SDA_E1
+        #endif
+      #endif
+    #endif
+  #endif
+};
+
+static SlowSoftI2CMaster pots[DIGIPOT_I2C_NUM_CHANNELS] = {
+  SlowSoftI2CMaster { sda_pins[X_AXIS], DIGIPOTS_I2C_SCL }
+  #if DIGIPOT_I2C_NUM_CHANNELS > 1
+    , SlowSoftI2CMaster { sda_pins[Y_AXIS], DIGIPOTS_I2C_SCL }
+    #if DIGIPOT_I2C_NUM_CHANNELS > 2
+      , SlowSoftI2CMaster { sda_pins[Z_AXIS], DIGIPOTS_I2C_SCL }
+      #if DIGIPOT_I2C_NUM_CHANNELS > 3
+        , SlowSoftI2CMaster { sda_pins[E_AXIS], DIGIPOTS_I2C_SCL }
+        #if DIGIPOT_I2C_NUM_CHANNELS > 4
+          , SlowSoftI2CMaster { sda_pins[E_AXIS + 1], DIGIPOTS_I2C_SCL }
+        #endif
+      #endif
+    #endif
+  #endif
+};
+
+static void i2c_send(const uint8_t channel, const byte v) {
+  if (WITHIN(channel, 0, DIGIPOT_I2C_NUM_CHANNELS - 1)) {
+    pots[channel].i2c_start(((DIGIPOT_I2C_ADDRESS) << 1) | I2C_WRITE);
+    pots[channel].i2c_write(v);
+    pots[channel].i2c_stop();
+  }
+}
+
+// This is for the MCP4018 I2C based digipot
+void digipot_i2c_set_current(uint8_t channel, float current) {
+  i2c_send(channel, current_to_wiper(min(max(current, 0.0f), float(DIGIPOT_A4988_MAX_CURRENT))));
+}
+
+void digipot_i2c_init() {
+  static const float digipot_motor_current[] PROGMEM = DIGIPOT_I2C_MOTOR_CURRENTS;
+
+  for (uint8_t i = 0; i < DIGIPOT_I2C_NUM_CHANNELS; i++)
+    pots[i].i2c_init();
+
+  // setup initial currents as defined in Configuration_adv.h
+  for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++)
+    digipot_i2c_set_current(i, pgm_read_float(&digipot_motor_current[i]));
+}
+
+#endif // DIGIPOT_I2C && DIGIPOT_MCP4018

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/digipot_mcp4451.cpp

@@ -1,54 +1,79 @@
-#include "Configuration.h"
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "MarlinConfig.h"
+
+#if ENABLED(DIGIPOT_I2C) && DISABLED(DIGIPOT_MCP4018)
 
-#ifdef DIGIPOT_I2C
 #include "Stream.h"
 #include "utility/twi.h"
 #include "Wire.h"
 
 // Settings for the I2C based DIGIPOT (MCP4451) on Azteeg X3 Pro
-#define DIGIPOT_I2C_FACTOR 106.7
-#define DIGIPOT_I2C_MAX_CURRENT 2.5
+#if MB(5DPRINT)
+  #define DIGIPOT_I2C_FACTOR 117.96
+  #define DIGIPOT_I2C_MAX_CURRENT 1.736
+#else
+  #define DIGIPOT_I2C_FACTOR 106.7
+  #define DIGIPOT_I2C_MAX_CURRENT 2.5
+#endif
 
-static byte current_to_wiper( float current ){
-    return byte(ceil(float((DIGIPOT_I2C_FACTOR*current))));
+static byte current_to_wiper(const float current) {
+  return byte(CEIL(float((DIGIPOT_I2C_FACTOR * current))));
 }
 
-static void i2c_send(byte addr, byte a, byte b)
-{
-	Wire.beginTransmission(addr);
-    Wire.write(a);
-    Wire.write(b);
-    Wire.endTransmission();
+static void i2c_send(const byte addr, const byte a, const byte b) {
+  Wire.beginTransmission(addr);
+  Wire.write(a);
+  Wire.write(b);
+  Wire.endTransmission();
 }
 
 // This is for the MCP4451 I2C based digipot
-void digipot_i2c_set_current( int channel, float current )
-{
-    current = min( (float) max( current, 0.0f ), DIGIPOT_I2C_MAX_CURRENT);
-    // these addresses are specific to Azteeg X3 Pro, can be set to others,
-    // In this case first digipot is at address A0=0, A1= 0, second one is at A0=0, A1= 1
-    byte addr= 0x2C; // channel 0-3
-    if(channel >= 4) {
-    	addr= 0x2E; // channel 4-7
-    	channel-= 4;
-    }
-
-    // Initial setup
-    i2c_send( addr, 0x40, 0xff );
-    i2c_send( addr, 0xA0, 0xff );
-
-    // Set actual wiper value
-    byte addresses[4] = { 0x00, 0x10, 0x60, 0x70 };
-    i2c_send( addr, addresses[channel], current_to_wiper(current) );
+void digipot_i2c_set_current(uint8_t channel, float current) {
+  current = min((float) max(current, 0.0f), DIGIPOT_I2C_MAX_CURRENT);
+  // these addresses are specific to Azteeg X3 Pro, can be set to others,
+  // In this case first digipot is at address A0=0, A1= 0, second one is at A0=0, A1= 1
+  byte addr = 0x2C; // channel 0-3
+  if (channel >= 4) {
+    addr = 0x2E; // channel 4-7
+    channel -= 4;
+  }
+
+  // Initial setup
+  i2c_send(addr, 0x40, 0xFF);
+  i2c_send(addr, 0xA0, 0xFF);
+
+  // Set actual wiper value
+  byte addresses[4] = { 0x00, 0x10, 0x60, 0x70 };
+  i2c_send(addr, addresses[channel], current_to_wiper(current));
 }
 
-void digipot_i2c_init()
-{
-    const float digipot_motor_current[] = DIGIPOT_I2C_MOTOR_CURRENTS;
-    Wire.begin();
-    // setup initial currents as defined in Configuration_adv.h
-    for(int i=0;i<=sizeof(digipot_motor_current)/sizeof(float);i++) {
-        digipot_i2c_set_current(i, digipot_motor_current[i]);
-    }
+void digipot_i2c_init() {
+  static const float digipot_motor_current[] PROGMEM = DIGIPOT_I2C_MOTOR_CURRENTS;
+  Wire.begin();
+  // setup initial currents as defined in Configuration_adv.h
+  for (uint8_t i = 0; i < COUNT(digipot_motor_current); i++)
+    digipot_i2c_set_current(i, pgm_read_float(&digipot_motor_current[i]));
 }
-#endif
+
+#endif // DIGIPOT_I2C

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_bitmaps.h

@@ -0,0 +1,729 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Standard Marlin Bitmap for splashscreen
+ *
+ * You may use one of the following tools to generate the C++ bitmap array from
+ * a black and white image:
+ *
+ *  - http://www.marlinfw.org/tools/u8glib/converter.html
+ *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
+ *
+ * Please note that using the high-res version takes 402Bytes of PROGMEM.
+ */
+
+#define START_BMPHIGH
+
+#if ENABLED(SHOW_BOOTSCREEN)
+  #if ENABLED(START_BMPHIGH)
+    #define START_BMPWIDTH      128
+    #define START_BMPHEIGHT      64
+    #define START_BMPBYTEWIDTH   16
+    #define START_BMPBYTES     1024 // START_BMPWIDTH * START_BMPHEIGHT / 8
+
+    const unsigned char start_bmp[START_BMPBYTES] PROGMEM = {
+      /*
+      0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+      0x0F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+      0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0xFF, 0xFF,
+      0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xFF, 0xFF,
+      0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF,
+      0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF,
+      0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF,
+      0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x3F, 0xFF,
+      0xC0, 0x0F, 0xC0, 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x18, 0x00, 0x1F, 0xFF,
+      0xC0, 0x3F, 0xE1, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, 0x3C, 0x00, 0x0F, 0xFF,
+      0xC0, 0x7F, 0xF3, 0xFF, 0x80, 0x00, 0x00, 0x00, 0x00, 0x78, 0x3C, 0x00, 0x07, 0xFF,
+      0xC0, 0xFF, 0xFF, 0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x78, 0x3C, 0x00, 0x03, 0xFF,
+      0xC1, 0xF8, 0x7F, 0x87, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x01, 0xFF,
+      0xC1, 0xF0, 0x3F, 0x03, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0xFF,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0x1F, 0x00, 0x03, 0xE0, 0x78, 0x3C, 0x03, 0xF0, 0x7F,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0x7F, 0xC0, 0x0F, 0xF8, 0x78, 0x3C, 0x07, 0xFC, 0x3F,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE1, 0xFF, 0xE0, 0x1F, 0xFC, 0x78, 0x3C, 0x0F, 0xFE, 0x1F,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xFF, 0xF0, 0x3F, 0xFE, 0x78, 0x3C, 0x1F, 0xFE, 0x0F,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xF3, 0xF8, 0x3F, 0x3E, 0x78, 0x3C, 0x3F, 0x3F, 0x07,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0xE0, 0xFC, 0x7C, 0x1F, 0x78, 0x3C, 0x3E, 0x1F, 0x07,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0xC0, 0x7C, 0x7C, 0x0F, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x7C, 0x78, 0x0F, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0x80, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE7, 0xC0, 0x3C, 0x78, 0x00, 0x78, 0x3C, 0x3C, 0x0F, 0x03,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xE0, 0x3C, 0x78, 0x00, 0x7C, 0x3C, 0x3C, 0x0F, 0x03,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE3, 0xFF, 0x3F, 0xF8, 0x00, 0x7F, 0xBC, 0x3C, 0x0F, 0x03,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE1, 0xFF, 0x3F, 0xF8, 0x00, 0x3F, 0xBF, 0xFC, 0x0F, 0x03,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0xFF, 0x3F, 0xF8, 0x00, 0x1F, 0xBF, 0xFC, 0x0F, 0x03,
+      0xC1, 0xE0, 0x1E, 0x01, 0xE0, 0x7F, 0x3F, 0xF8, 0x00, 0x0F, 0xBF, 0xFC, 0x0F, 0x03,
+      0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07,
+      0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06,
+      0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E,
+      0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1C,
+      0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78,
+      0x0F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0,
+      0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x80
+      */
+
+      // Creality 3D
+      /*
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,
+      0x08,0x08,0x00,0x00,0x00,0x04,0x28,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x08,0x08,
+      0xF8,0x00,0x00,0x04,0x24,0x00,0x00,0x00,0x00,0x00,0x00,0x28,0x08,0x08,0x88,0x3F,
+      0xFE,0x08,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x24,0x48,0x7E,0x88,0x00,0x00,0x09,
+      0x7F,0x80,0x00,0x00,0x00,0x00,0x00,0x42,0x48,0x08,0xF8,0x00,0x00,0x11,0x44,0x00,
+      0x00,0x00,0x00,0x00,0x00,0x81,0x48,0x18,0x88,0x00,0x00,0x3E,0xC4,0x00,0x00,0x00,
+      0x00,0x00,0x01,0x7C,0x48,0x1C,0xF8,0x00,0x00,0x05,0x7F,0x00,0x00,0x00,0x00,0x00,
+      0x00,0x44,0x48,0x2A,0x88,0x1F,0xFC,0x08,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x44,
+      0x48,0x48,0x88,0x00,0x00,0x10,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x44,0x48,0x08,
+      0xF8,0x00,0x00,0x3F,0x7F,0x00,0x00,0x00,0x00,0x00,0x00,0x54,0x48,0x01,0x00,0x00,
+      0x00,0x10,0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x48,0x48,0x08,0x84,0x00,0x00,0x00,
+      0x44,0x00,0x00,0x00,0x00,0x00,0x00,0x41,0x08,0x48,0x92,0x00,0x00,0x07,0x44,0x00,
+      0x00,0x00,0x00,0x00,0x00,0x41,0x08,0x48,0x12,0x7F,0xFF,0x38,0x7F,0x80,0x00,0x00,
+      0x00,0x00,0x00,0x3F,0x28,0x87,0xF0,0x00,0x00,0x10,0x40,0x00,0x00,0x00,0x00,0x00,
+      0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+      0x00,0x00,0x00,0x3E,0x00,0x00,0x00,0x07,0x01,0x80,0x00,0x00,0x00,0x3C,0x7E,0x00,
+      0x00,0x42,0x00,0x00,0x00,0x01,0x01,0x80,0x80,0x00,0x00,0x42,0x21,0x00,0x00,0x42,
+      0x00,0x00,0x00,0x01,0x00,0x00,0x80,0x00,0x00,0x42,0x20,0x80,0x00,0x80,0x00,0x00,
+      0x00,0x01,0x00,0x00,0x80,0x00,0x00,0x04,0x20,0x80,0x00,0x80,0xEE,0x1E,0x0F,0x01,
+      0x03,0x83,0xE1,0xDC,0x00,0x18,0x20,0x80,0x00,0x80,0x32,0x21,0x10,0x81,0x00,0x80,
+      0x80,0x88,0x00,0x04,0x20,0x80,0x00,0x80,0x20,0x3F,0x07,0x81,0x00,0x80,0x80,0x90,
+      0x00,0x02,0x20,0x80,0x00,0x80,0x20,0x20,0x08,0x81,0x00,0x80,0x80,0x50,0x00,0x02,
+      0x20,0x80,0x00,0x82,0x20,0x20,0x10,0x81,0x00,0x80,0x80,0x50,0x00,0x42,0x20,0x80,
+      0x00,0x44,0x20,0x21,0x10,0x81,0x00,0x80,0x90,0x20,0x00,0x42,0x21,0x00,0x00,0x38,
+      0xF8,0x1E,0x0F,0xC7,0xC3,0xE0,0xE0,0x20,0x00,0x3C,0x7E,0x00,0x00,0x00,0x00,0x00,
+      0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+      0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
+      */
+
+      // ENDER
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xEF,0xEF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE7,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE3,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF3,0xCF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1,0xE1,0xCF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFE,0x78,0x00,0x00,0x03,0xDD,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFE,0xFF,0x80,0x7E,0x00,0x01,0xEE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFE,0x7D,0xCF,0xFC,0x00,0x00,0xF7,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0x8E,0x06,0x00,0x00,0x00,0x7B,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,0x7D,0xDF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFC,0x01,0xFE,0x00,0x00,0x3E,0xE7,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,0x03,0x1F,0x73,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF8,0x00,0x01,0x8F,0x81,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x00,0x00,0x83,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0xFC,0x00,0x00,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x0F,0xFF,0xC0,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFE,0x03,0xFF,0xFF,0xC0,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF9,0x00,0x00,0x00,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x00,0x07,0xC0,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x00,0x07,0xE0,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x07,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0x07,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x03,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x83,0xF9,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xC3,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF0,0xBF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFB,0xF8,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xF9,0xF8,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7E,0xF0,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x8E,0x03,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xE0,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0x00,0x00,0x7F,0xFF,0xFF,0xF8,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0x80,0x00,0x7F,0xFF,0xFF,0xE0,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xC3,0xFC,0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xC3,0xFC,0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0x87,0xFD,0xFF,0xFF,0xFF,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0x87,0xFF,0xFF,0xFF,0xFF,0xF1,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0x0F,0xE7,0xF3,0x0F,0xFC,0x23,0xFC,0x3F,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0x0F,0xEF,0x80,0x07,0xF0,0x03,0xF0,0x1E,0x00,0x7F,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFE,0x1F,0xCF,0x81,0x87,0xC7,0x87,0xC7,0x0C,0x00,0x7F,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFE,0x00,0x1F,0xC7,0xC7,0x8F,0xC7,0x9F,0x0F,0x0C,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFE,0x00,0x1F,0x87,0x8F,0x1F,0x8F,0x1F,0x0F,0x1F,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFC,0x3F,0x9F,0x8F,0x8F,0x1F,0x8E,0x00,0x1E,0x3F,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFC,0x7F,0x3F,0x0F,0x1E,0x3F,0x1E,0x3F,0xFE,0x3F,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xF8,0x7F,0xFF,0x1F,0x1C,0x3F,0x1C,0x7F,0xFC,0x7F,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0x1E,0x1C,0x7E,0x1C,0x7F,0xFC,0x7F,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xF0,0xFF,0xCE,0x3E,0x3C,0x7E,0x3C,0x7F,0xB8,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xF0,0xFF,0x9E,0x3C,0x38,0x7C,0x38,0x7E,0x78,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xE1,0xFF,0x3C,0x7C,0x78,0x7C,0x78,0x3C,0xF1,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xE1,0xF8,0x38,0x78,0x78,0x10,0x18,0x01,0xF1,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0x00,0x00,0x60,0x20,0x3C,0x00,0x7C,0x07,0x80,0x7F,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0x1F,0xFE,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
+      0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF
+
+	  };
+  #else
+    #define START_BMPWIDTH      56
+    #define START_BMPHEIGHT     19
+    #define START_BMPBYTEWIDTH  7
+    #define START_BMPBYTES      133 // START_BMPWIDTH * START_BMPHEIGHT / 8
+
+    const unsigned char start_bmp[START_BMPBYTES] PROGMEM = 
+	{
+      0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
+      0x60, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF,
+      0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF,
+      0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F,
+      0x83, 0xCF, 0x00, 0x00, 0x0C, 0x30, 0x3F,
+      0x87, 0xFF, 0x80, 0x00, 0x0C, 0x30, 0x1F,
+      0x86, 0x79, 0x80, 0x00, 0x0C, 0x00, 0x0F,
+      0x8C, 0x30, 0xC7, 0x83, 0x8C, 0x30, 0xE7,
+      0x8C, 0x30, 0xCF, 0xC7, 0xCC, 0x31, 0xF3,
+      0x8C, 0x30, 0xDC, 0xEC, 0xEC, 0x33, 0xB9,
+      0x8C, 0x30, 0xD8, 0x6C, 0x6C, 0x33, 0x19,
+      0x8C, 0x30, 0xD0, 0x6C, 0x0C, 0x33, 0x19,
+      0x8C, 0x30, 0xD8, 0x6C, 0x0C, 0x33, 0x19,
+      0x8C, 0x30, 0xDC, 0x6C, 0x0E, 0x3B, 0x19,
+      0x8C, 0x30, 0xCF, 0x7C, 0x07, 0x9F, 0x19,
+      0x8C, 0x30, 0xC7, 0x7C, 0x03, 0x8F, 0x19,
+      0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02,
+      0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06,
+      0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8
+	  
+	};
+  #endif
+#endif
+
+// Here comes a compile-time operation to match the extruder symbols
+// on the info screen to the set number of extruders in configuration.h
+//
+// When only one extruder is selected, the "1" on the symbol will not
+// be displayed.
+
+#if HAS_TEMP_BED
+  #if HOTENDS == 1
+    /*
+    #define STATUS_SCREENWIDTH     115 //Width in pixels
+    #define STATUS_SCREENHEIGHT     19 //Height in pixels
+    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
+    const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
+      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
+      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x5E, 0x07, 0xA0,
+      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x5F, 0x0F, 0xA0,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x4F, 0x0F, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x47, 0x0E, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x63, 0x0C, 0x60,
+      0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
+      0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
+    };
+
+    #define STATUS_SCREENWIDTH     115 //Width in pixels
+    #define STATUS_SCREENHEIGHT     19 //Height in pixels
+    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
+    const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
+      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
+      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x58, 0x01, 0xA0,
+      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0x60, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0xF0, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x41, 0xF8, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x61, 0xF8, 0x60,
+      0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
+      0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
+    };
+    */
+    #define STATUS_SCREENWIDTH 		125	//Width in pixels
+    #define STATUS_SCREENHEIGHT 	19	//Height in pixels
+    #define STATUS_SCREENBYTEWIDTH 	15	//Width in bytes
+    const unsigned char status_screen0_bmp[] PROGMEM = 
+	{
+      // AVR-GCC, WinAVR
+      // chuangxiang 3D
+      /*
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+      0x00,0x80,0x81,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
+      0x00,0xC0,0x81,0x1F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
+      0x01,0x20,0x81,0x10,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+      0x02,0x14,0x8F,0xDF,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+      0x04,0x04,0x81,0x10,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
+      0x0B,0xE4,0x83,0x9F,0x80,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
+      0x02,0x24,0x85,0x50,0x80,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
+      0x02,0x24,0x89,0x1F,0x80,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
+      0x02,0x24,0x81,0x10,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
+      0x02,0xC4,0x80,0xA1,0x00,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2F,0x03,0xD0,
+      0x02,0x00,0x82,0x90,0x80,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
+      0x02,0x10,0x82,0x8A,0x40,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
+      0x02,0x12,0x84,0x82,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x27,0x87,0x90,
+      0x01,0xF1,0x00,0x7E,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x33,0x87,0x30,
+      0x00,0x00,0x00,0x00,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+      0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
+      0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,
+      */
+
+      // Ender-3
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x87,0x30,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x27,0x87,0x90,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x87,0xD0,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2F,0x03,0xD0,
+      0xF8,0x01,0x80,0x00,0x0C,0x1F,0xE0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
+      0x48,0x00,0x80,0x00,0x12,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
+      0x43,0xC3,0x8C,0xD0,0x02,0x3F,0xF0,0x00,0x00,0x04,0x10,0x40,0x00,0x20,0x78,0x10,
+      0x71,0x24,0x92,0x67,0xCC,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x20,0x30,0x10,
+      0x41,0x24,0x9E,0x40,0x02,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2F,0x03,0xD0,
+      0x49,0x24,0x90,0x40,0x12,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
+      0xFB,0xB3,0xCE,0xE0,0x0C,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x2F,0x87,0xD0,
+      0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x27,0x87,0x90,
+      0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x33,0x87,0x30,
+      0x00,0x00,0x00,0x00,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+      0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
+      0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
+
+    };
+
+    #define STATUS_SCREENWIDTH 		125	//Width in pixels
+    #define STATUS_SCREENHEIGHT 	19	//Height in pixels
+    #define STATUS_SCREENBYTEWIDTH 	16	//Width in bytes
+    const unsigned char status_screen1_bmp[] PROGMEM = 
+    {
+      // AVR-GCC, WinAVR
+      // chuangxiang 3D
+      /*
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+      0x00,0x80,0x81,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
+      0x00,0xC0,0x81,0x1F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
+      0x01,0x20,0x81,0x10,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
+      0x02,0x14,0x8F,0xDF,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
+      0x04,0x04,0x81,0x10,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
+      0x0B,0xE4,0x83,0x9F,0x80,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
+      0x02,0x24,0x85,0x50,0x80,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
+      0x02,0x24,0x89,0x1F,0x80,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
+      0x02,0x24,0x81,0x10,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
+      0x02,0xC4,0x80,0xA1,0x00,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2C,0x00,0xD0,
+      0x02,0x00,0x82,0x90,0x80,0x1F,0xE0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x30,0x10,
+      0x02,0x10,0x82,0x8A,0x40,0x3F,0xF0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x78,0x10,
+      0x02,0x12,0x84,0x82,0x00,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0xFC,0x10,
+      0x01,0xF1,0x00,0x7E,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x30,0xFC,0x30,
+      0x00,0x00,0x00,0x00,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+      0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
+      0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00,
+      */
+
+      // Ender-3
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3F,0xFF,0xF0,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0xFC,0x30,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0xFC,0x10,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x78,0x10,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x30,0x10,
+      0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2C,0x00,0xD0,
+      0xF8,0x01,0x80,0x00,0x0C,0x1F,0xE0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
+      0x48,0x00,0x80,0x00,0x12,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
+      0x43,0xC3,0x8C,0xD0,0x02,0x3F,0xF0,0x00,0x00,0x08,0x20,0x80,0x00,0x2F,0x7B,0xD0,
+      0x71,0x24,0x92,0x67,0xCC,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x2E,0x31,0xD0,
+      0x41,0x24,0x9E,0x40,0x02,0x1F,0xE0,0x00,0x00,0x20,0x82,0x00,0x00,0x2C,0x00,0xD0,
+      0x49,0x24,0x90,0x40,0x12,0x1F,0xE0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x30,0x10,
+      0xFB,0xB3,0xCE,0xE0,0x0C,0x3F,0xF0,0x00,0x00,0x41,0x04,0x00,0x00,0x20,0x78,0x10,
+      0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x20,0x82,0x00,0x00,0x20,0xFC,0x10,
+      0x00,0x00,0x00,0x00,0x00,0x3F,0xF0,0x00,0x00,0x10,0x41,0x00,0x00,0x30,0xFC,0x30,
+      0x00,0x00,0x00,0x00,0x00,0x0F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x70,
+      0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x3F,0xFF,0xF0,
+      0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xFF,0xFF,0xC0,0x00,0x00,0x00,0x00
+
+    };
+  #elif HOTENDS == 2
+    #define STATUS_SCREENWIDTH     115 //Width in pixels
+    #define STATUS_SCREENHEIGHT     19 //Height in pixels
+    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
+    const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
+      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
+      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
+      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
+      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
+      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x5E, 0x07, 0xA0,
+      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x5F, 0x0F, 0xA0,
+      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x4F, 0x0F, 0x20,
+      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x47, 0x0E, 0x20,
+      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x63, 0x0C, 0x60,
+      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
+      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
+    };
+
+    #define STATUS_SCREENWIDTH     115 //Width in pixels
+    #define STATUS_SCREENHEIGHT     19 //Height in pixels
+    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
+    const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
+      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
+      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
+      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
+      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
+      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x58, 0x01, 0xA0,
+      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0x60, 0x20,
+      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x01, 0x04, 0x10, 0x00, 0x40, 0xF0, 0x20,
+      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x82, 0x08, 0x00, 0x41, 0xF8, 0x20,
+      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0x04, 0x00, 0x61, 0xF8, 0x60,
+      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
+      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
+    };
+  #else
+    #define STATUS_SCREENWIDTH     115 //Width in pixels
+    #define STATUS_SCREENHEIGHT     19 //Height in pixels
+    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
+    const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
+      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
+      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
+      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x40, 0xF0, 0x20,
+      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x40, 0x60, 0x20,
+      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x82, 0x08, 0x00, 0x5E, 0x07, 0xA0,
+      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x01, 0x04, 0x10, 0x00, 0x5F, 0x0F, 0xA0,
+      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x01, 0x04, 0x10, 0x00, 0x4F, 0x0F, 0x20,
+      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x82, 0x08, 0x00, 0x47, 0x0E, 0x20,
+      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x63, 0x0C, 0x60,
+      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
+      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
+    };
+
+    #define STATUS_SCREENWIDTH     115 //Width in pixels
+    #define STATUS_SCREENHEIGHT     19 //Height in pixels
+    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
+    const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
+      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
+      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
+      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x20, 0x82, 0x00, 0x5E, 0xF7, 0xA0,
+      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x5C, 0x63, 0xA0,
+      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x82, 0x08, 0x00, 0x58, 0x01, 0xA0,
+      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x01, 0x04, 0x10, 0x00, 0x40, 0x60, 0x20,
+      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x01, 0x04, 0x10, 0x00, 0x40, 0xF0, 0x20,
+      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x82, 0x08, 0x00, 0x41, 0xF8, 0x20,
+      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x41, 0x04, 0x00, 0x61, 0xF8, 0x60,
+      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x7F, 0xFF, 0xE0,
+      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x01, 0xFF, 0xFF, 0x80, 0x00, 0x00, 0x00
+    };
+  #endif // Extruders
+#else
+  #if HOTENDS == 1
+    #define STATUS_SCREENWIDTH     115 //Width in pixels
+    #define STATUS_SCREENHEIGHT     19 //Height in pixels
+    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
+    const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
+      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
+      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
+      0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    };
+
+    #define STATUS_SCREENWIDTH     115 //Width in pixels
+    #define STATUS_SCREENHEIGHT     19 //Height in pixels
+    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
+    const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
+      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
+      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
+      0x7F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
+      0xFF, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
+      0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    };
+  #elif HOTENDS == 2
+    #define STATUS_SCREENWIDTH     115 //Width in pixels
+    #define STATUS_SCREENHEIGHT     19 //Height in pixels
+    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
+    const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
+      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
+      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
+      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
+      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
+      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
+      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    };
+
+    #define STATUS_SCREENWIDTH     115 //Width in pixels
+    #define STATUS_SCREENHEIGHT     19 //Height in pixels
+    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
+    const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
+      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
+      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
+      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
+      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
+      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
+      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
+      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
+      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    };
+  #else
+    #define STATUS_SCREENWIDTH     115 //Width in pixels
+    #define STATUS_SCREENHEIGHT     19 //Height in pixels
+    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
+    const unsigned char status_screen0_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
+      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x07, 0xA0,
+      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x0F, 0xA0,
+      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x4F, 0x0F, 0x20,
+      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x47, 0x0E, 0x20,
+      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x63, 0x0C, 0x60,
+      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    };
+
+    #define STATUS_SCREENWIDTH     115 //Width in pixels
+    #define STATUS_SCREENHEIGHT     19 //Height in pixels
+    #define STATUS_SCREENBYTEWIDTH  15 //Width in bytes
+    const unsigned char status_screen1_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
+      0x7F, 0x80, 0x00, 0x3F, 0xC0, 0x00, 0x3F, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
+      0xFB, 0xC0, 0x00, 0x79, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
+      0xF3, 0xC0, 0x00, 0x76, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x5E, 0xF7, 0xA0,
+      0xEB, 0xC0, 0x00, 0x7E, 0xE0, 0x00, 0x7E, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x5C, 0x63, 0xA0,
+      0x7B, 0x80, 0x00, 0x3D, 0xC0, 0x00, 0x39, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x58, 0x01, 0xA0,
+      0x7B, 0x80, 0x00, 0x3B, 0xC0, 0x00, 0x3E, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x40, 0x60, 0x20,
+      0xFB, 0xC0, 0x00, 0x77, 0xE0, 0x00, 0x76, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x40, 0xF0, 0x20,
+      0xFB, 0xC0, 0x00, 0x70, 0xE0, 0x00, 0x79, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x41, 0xF8, 0x20,
+      0xFF, 0xC0, 0x00, 0x7F, 0xE0, 0x00, 0x7F, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x61, 0xF8, 0x60,
+      0x3F, 0x00, 0x00, 0x1F, 0x80, 0x00, 0x1F, 0x80, 0x00, 0x00, 0x00, 0x00, 0x70, 0x00, 0xE0,
+      0x1E, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7F, 0xFF, 0xE0,
+      0x0C, 0x00, 0x00, 0x06, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
+    };
+  #endif // Extruders
+
+  #if ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY)
+    const unsigned char cw_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x07,0xf8,0x00, // 000001111111100000000000
+      0x0c,0x0c,0x00, // 000011000000110000000000
+      0x10,0x02,0x00, // 000100000000001000000000
+      0x20,0x01,0x00, // 001000000000000100000000
+      0x60,0x01,0x80, // 011000000000000100000000
+      0x40,0x00,0x80, // 010000000000000010000000
+      0x40,0x03,0xe0, // 010000000000000011100000
+      0x40,0x01,0xc0, // 010000000000000011000000
+      0x40,0x00,0x80, // 010000000000000010000000
+      0x40,0x00,0x00, // 010000000000000000000000
+      0x40,0x00,0x00, // 010000000000000000000000
+      0x60,0x00,0x00, // 011000000000000000000000
+      0x20,0x00,0x00, // 001000000000000000000000
+      0x10,0x00,0x00, // 000100000000000000000000
+      0x0c,0x0c,0x00, // 000011000000110000000000
+      0x07,0xf8,0x00  // 000001111111100000000000
+    };
+
+    const unsigned char ccw_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x01,0xfe,0x00, // 000000011111111000000000
+      0x03,0x03,0x00, // 000000110000001100000000
+      0x04,0x00,0x80, // 000001000000000010000000
+      0x08,0x00,0x40, // 000010000000000001000000
+      0x18,0x00,0x60, // 000110000000000001100000
+      0x10,0x00,0x20, // 000100000000000000100000
+      0x7c,0x00,0x20, // 011111000000000000100000
+      0x38,0x00,0x20, // 001110000000000000100000
+      0x10,0x00,0x20, // 000100000000000000100000
+      0x00,0x00,0x20, // 000000000000000000100000
+      0x00,0x00,0x20, // 000000000000000000100000
+      0x00,0x00,0x60, // 000000000000000001100000
+      0x00,0x00,0x40, // 000000000000000001000000
+      0x00,0x00,0x80, // 000000000000000010000000
+      0x03,0x03,0x00, // 000000110000001100000000
+      0x01,0xfe,0x00  // 000000011111111000000000
+    };
+
+
+    const unsigned char up_arrow_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x06,0x00, // 000001100000
+      0x0F,0x00, // 000011110000
+      0x1F,0x80, // 000111111000
+      0x3F,0xC0, // 001111111100
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00  // 000001100000
+    };
+
+    const unsigned char down_arrow_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x06,0x00, // 000001100000
+      0x3F,0xC0, // 001111111100
+      0x1F,0x80, // 000111111000
+      0x0F,0x00, // 000011110000
+      0x06,0x00  // 000001100000
+    };
+
+    const unsigned char offset_bedline_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0xFF,0xFF,0xFF // 111111111111111111111111
+    };
+
+    const unsigned char nozzle_bmp[] PROGMEM = { //AVR-GCC, WinAVR
+      0x7F,0x80, // 0111111110000000
+      0xFF,0xC0, // 1111111111000000
+      0xFF,0xC0, // 1111111111000000
+      0xFF,0xC0, // 1111111111000000
+      0x7F,0x80, // 0111111110000000
+      0x7F,0x80, // 0111111110000000
+      0xFF,0xC0, // 1111111111000000
+      0xFF,0xC0, // 1111111111000000
+      0xFF,0xC0, // 1111111111000000
+      0x3F,0x00, // 0011111100000000
+      0x1E,0x00, // 0001111000000000
+      0x0C,0x00  // 0000110000000000
+    };
+  #endif // BABYSTEP_ZPROBE_GFX_OVERLAY
+#endif // HAS_TEMP_BED

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_6x9_marlin.h

@@ -0,0 +1,180 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+  Fontname: -Misc-Fixed-Medium-R-Normal--9-90-75-75-C-60-ISO10646-1
+  Copyright: Public domain font.  Share and enjoy.
+  Capital A Height: 6, '1' Height: 6
+  Calculated Max Values w= 6 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 7 len= 9
+  Font Bounding box     w= 6 h= 9 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-2 dx= 0 dy= 0
+  Pure Font   ascent = 6 descent=-2
+  X Font      ascent = 6 descent=-2
+  Max Font    ascent = 7 descent=-2
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t u8g_font_6x9[2300] U8G_SECTION(".progmem.u8g_font_6x9") = {
+  0, 6, 9, 0, 254, 6, 1, 137, 2, 254, 32, 255, 254, 7, 254, 6,
+  254, 0, 0, 0, 6, 0, 7, 1, 6, 6, 6, 2, 0, 128, 128, 128,
+  128, 0, 128, 3, 3, 3, 6, 1, 3, 160, 160, 160, 5, 7, 7, 6,
+  0, 255, 80, 80, 248, 80, 248, 80, 80, 5, 9, 9, 6, 0, 254, 32,
+  112, 168, 160, 112, 40, 168, 112, 32, 6, 8, 8, 6, 0, 255, 64, 168,
+  72, 16, 32, 72, 84, 8, 5, 7, 7, 6, 0, 255, 96, 144, 144, 96,
+  152, 144, 104, 1, 3, 3, 6, 2, 3, 128, 128, 128, 2, 7, 7, 6,
+  2, 255, 64, 128, 128, 128, 128, 128, 64, 2, 7, 7, 6, 2, 255, 128,
+  64, 64, 64, 64, 64, 128, 5, 5, 5, 6, 0, 0, 136, 80, 248, 80,
+  136, 5, 5, 5, 6, 0, 0, 32, 32, 248, 32, 32, 2, 4, 4, 6,
+  2, 254, 192, 64, 64, 128, 5, 1, 1, 6, 0, 2, 248, 2, 2, 2,
+  6, 2, 0, 192, 192, 4, 6, 6, 6, 1, 0, 16, 16, 32, 64, 128,
+  128, 4, 6, 6, 6, 1, 0, 96, 144, 144, 144, 144, 96, 3, 6, 6,
+  6, 1, 0, 64, 192, 64, 64, 64, 224, 4, 6, 6, 6, 1, 0, 96,
+  144, 16, 32, 64, 240, 4, 6, 6, 6, 1, 0, 240, 32, 96, 16, 16,
+  224, 5, 6, 6, 6, 0, 0, 16, 48, 80, 144, 248, 16, 4, 6, 6,
+  6, 1, 0, 240, 128, 224, 16, 16, 224, 4, 6, 6, 6, 1, 0, 96,
+  128, 224, 144, 144, 96, 4, 6, 6, 6, 1, 0, 240, 16, 16, 32, 64,
+  64, 4, 6, 6, 6, 1, 0, 96, 144, 96, 144, 144, 96, 4, 6, 6,
+  6, 1, 0, 96, 144, 144, 112, 16, 96, 2, 5, 5, 6, 2, 0, 192,
+  192, 0, 192, 192, 2, 7, 7, 6, 2, 254, 192, 192, 0, 192, 64, 64,
+  128, 5, 5, 5, 6, 0, 0, 24, 96, 128, 96, 24, 5, 3, 3, 6,
+  0, 1, 248, 0, 248, 5, 5, 5, 6, 0, 0, 192, 48, 8, 48, 192,
+  4, 7, 7, 6, 1, 0, 96, 144, 16, 96, 64, 0, 64, 5, 6, 6,
+  6, 0, 0, 112, 144, 168, 176, 128, 112, 5, 6, 6, 6, 0, 0, 32,
+  80, 136, 248, 136, 136, 5, 6, 6, 6, 0, 0, 240, 136, 240, 136, 136,
+  240, 4, 6, 6, 6, 1, 0, 96, 144, 128, 128, 144, 96, 4, 6, 6,
+  6, 1, 0, 224, 144, 144, 144, 144, 224, 4, 6, 6, 6, 1, 0, 240,
+  128, 224, 128, 128, 240, 4, 6, 6, 6, 1, 0, 240, 128, 224, 128, 128,
+  128, 4, 6, 6, 6, 1, 0, 96, 144, 128, 176, 144, 96, 4, 6, 6,
+  6, 1, 0, 144, 144, 240, 144, 144, 144, 3, 6, 6, 6, 1, 0, 224,
+  64, 64, 64, 64, 224, 5, 6, 6, 6, 0, 0, 56, 16, 16, 16, 144,
+  96, 4, 6, 6, 6, 1, 0, 144, 160, 192, 160, 144, 144, 4, 6, 6,
+  6, 1, 0, 128, 128, 128, 128, 128, 240, 5, 6, 6, 6, 0, 0, 136,
+  216, 168, 168, 136, 136, 4, 6, 6, 6, 1, 0, 144, 208, 176, 144, 144,
+  144, 5, 6, 6, 6, 0, 0, 112, 136, 136, 136, 136, 112, 4, 6, 6,
+  6, 1, 0, 224, 144, 144, 224, 128, 128, 4, 7, 7, 6, 1, 255, 96,
+  144, 144, 208, 176, 96, 16, 4, 6, 6, 6, 1, 0, 224, 144, 144, 224,
+  144, 144, 4, 6, 6, 6, 1, 0, 96, 144, 64, 32, 144, 96, 5, 6,
+  6, 6, 0, 0, 248, 32, 32, 32, 32, 32, 4, 6, 6, 6, 1, 0,
+  144, 144, 144, 144, 144, 96, 4, 6, 6, 6, 1, 0, 144, 144, 144, 240,
+  96, 96, 5, 6, 6, 6, 0, 0, 136, 136, 168, 168, 216, 136, 5, 6,
+  6, 6, 0, 0, 136, 80, 32, 32, 80, 136, 5, 6, 6, 6, 0, 0,
+  136, 136, 80, 32, 32, 32, 4, 6, 6, 6, 1, 0, 240, 16, 32, 64,
+  128, 240, 3, 6, 6, 6, 1, 0, 224, 128, 128, 128, 128, 224, 4, 6,
+  6, 6, 1, 0, 128, 128, 64, 32, 16, 16, 3, 6, 6, 6, 1, 0,
+  224, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 3, 32, 80, 136, 5,
+  1, 1, 6, 0, 254, 248, 2, 2, 2, 6, 2, 4, 128, 64, 4, 4,
+  4, 6, 1, 0, 112, 144, 144, 112, 4, 6, 6, 6, 1, 0, 128, 128,
+  224, 144, 144, 224, 4, 4, 4, 6, 1, 0, 112, 128, 128, 112, 4, 6,
+  6, 6, 1, 0, 16, 16, 112, 144, 144, 112, 4, 4, 4, 6, 1, 0,
+  96, 176, 192, 112, 4, 6, 6, 6, 1, 0, 32, 80, 64, 224, 64, 64,
+  4, 6, 6, 6, 1, 254, 96, 144, 144, 112, 16, 96, 4, 6, 6, 6,
+  1, 0, 128, 128, 224, 144, 144, 144, 3, 6, 6, 6, 1, 0, 64, 0,
+  192, 64, 64, 224, 3, 8, 8, 6, 1, 254, 32, 0, 96, 32, 32, 32,
+  160, 64, 4, 6, 6, 6, 1, 0, 128, 128, 160, 192, 160, 144, 3, 6,
+  6, 6, 1, 0, 192, 64, 64, 64, 64, 224, 5, 4, 4, 6, 0, 0,
+  208, 168, 168, 136, 4, 4, 4, 6, 1, 0, 224, 144, 144, 144, 4, 4,
+  4, 6, 1, 0, 96, 144, 144, 96, 4, 6, 6, 6, 1, 254, 224, 144,
+  144, 224, 128, 128, 4, 6, 6, 6, 1, 254, 112, 144, 144, 112, 16, 16,
+  4, 4, 4, 6, 1, 0, 160, 208, 128, 128, 4, 4, 4, 6, 1, 0,
+  112, 192, 48, 224, 4, 6, 6, 6, 1, 0, 64, 64, 224, 64, 80, 32,
+  4, 4, 4, 6, 1, 0, 144, 144, 144, 112, 4, 4, 4, 6, 1, 0,
+  144, 144, 96, 96, 5, 4, 4, 6, 0, 0, 136, 168, 168, 80, 4, 4,
+  4, 6, 1, 0, 144, 96, 96, 144, 4, 6, 6, 6, 1, 254, 144, 144,
+  144, 112, 144, 96, 4, 4, 4, 6, 1, 0, 240, 32, 64, 240, 3, 7,
+  7, 6, 1, 0, 32, 64, 64, 128, 64, 64, 32, 1, 7, 7, 6, 2,
+  255, 128, 128, 128, 128, 128, 128, 128, 3, 7, 7, 6, 1, 0, 128, 64,
+  64, 32, 64, 64, 128, 4, 2, 2, 6, 1, 3, 80, 160, 255, 255, 255,
+  255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255,
+  255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, 0, 0,
+  0, 6, 0, 7, 1, 6, 6, 6, 2, 0, 128, 0, 128, 128, 128, 128,
+  4, 6, 6, 6, 1, 255, 32, 112, 160, 160, 112, 32, 5, 7, 7, 6,
+  0, 255, 48, 72, 64, 240, 64, 64, 248, 5, 5, 5, 6, 0, 0, 168,
+  80, 136, 80, 168, 5, 6, 6, 6, 0, 0, 136, 80, 248, 32, 248, 32,
+  1, 7, 7, 6, 2, 255, 128, 128, 128, 0, 128, 128, 128, 4, 7, 7,
+  6, 1, 255, 112, 128, 96, 144, 96, 16, 224, 3, 1, 1, 6, 1, 5,
+  160, 6, 7, 7, 6, 0, 0, 120, 132, 148, 164, 148, 132, 120, 3, 5,
+  5, 6, 1, 1, 96, 160, 96, 0, 224, 5, 5, 5, 6, 0, 0, 40,
+  80, 160, 80, 40, 4, 3, 3, 6, 1, 0, 240, 16, 16, 4, 1, 1,
+  6, 1, 2, 240, 6, 7, 7, 6, 0, 0, 120, 132, 180, 164, 164, 132,
+  120, 4, 1, 1, 6, 1, 5, 240, 4, 3, 3, 6, 1, 2, 96, 144,
+  96, 5, 7, 7, 6, 0, 255, 32, 32, 248, 32, 32, 0, 248, 3, 5,
+  5, 6, 1, 1, 64, 160, 32, 64, 224, 3, 5, 5, 6, 1, 1, 192,
+  32, 64, 32, 192, 2, 2, 2, 6, 2, 4, 64, 128, 4, 5, 5, 6,
+  1, 255, 144, 144, 176, 208, 128, 5, 6, 6, 6, 0, 0, 120, 232, 232,
+  104, 40, 40, 1, 1, 1, 6, 2, 2, 128, 2, 2, 2, 6, 2, 254,
+  64, 128, 3, 5, 5, 6, 1, 1, 64, 192, 64, 64, 224, 3, 5, 5,
+  6, 1, 1, 64, 160, 64, 0, 224, 5, 5, 5, 6, 0, 0, 160, 80,
+  40, 80, 160, 5, 8, 8, 6, 0, 255, 64, 192, 64, 80, 112, 48, 120,
+  16, 5, 8, 8, 6, 0, 255, 64, 192, 64, 80, 104, 8, 16, 56, 5,
+  8, 8, 6, 0, 255, 192, 32, 64, 48, 240, 48, 120, 16, 4, 7, 7,
+  6, 1, 0, 32, 0, 32, 96, 128, 144, 96, 5, 7, 7, 6, 0, 0,
+  64, 32, 32, 80, 112, 136, 136, 5, 7, 7, 6, 0, 0, 16, 32, 32,
+  80, 112, 136, 136, 5, 7, 7, 6, 0, 0, 32, 80, 32, 80, 112, 136,
+  136, 5, 7, 7, 6, 0, 0, 40, 80, 32, 80, 112, 136, 136, 5, 7,
+  7, 6, 0, 0, 80, 0, 32, 80, 112, 136, 136, 5, 7, 7, 6, 0,
+  0, 32, 80, 32, 80, 112, 136, 136, 5, 6, 6, 6, 0, 0, 120, 160,
+  240, 160, 160, 184, 4, 8, 8, 6, 1, 254, 96, 144, 128, 128, 144, 96,
+  32, 64, 4, 7, 7, 6, 1, 0, 64, 32, 240, 128, 224, 128, 240, 4,
+  7, 7, 6, 1, 0, 32, 64, 240, 128, 224, 128, 240, 4, 7, 7, 6,
+  1, 0, 32, 80, 240, 128, 224, 128, 240, 4, 7, 7, 6, 1, 0, 80,
+  0, 240, 128, 224, 128, 240, 3, 7, 7, 6, 1, 0, 128, 64, 224, 64,
+  64, 64, 224, 3, 7, 7, 6, 1, 0, 32, 64, 224, 64, 64, 64, 224,
+  3, 7, 7, 6, 1, 0, 64, 160, 224, 64, 64, 64, 224, 3, 7, 7,
+  6, 1, 0, 160, 0, 224, 64, 64, 64, 224, 5, 6, 6, 6, 0, 0,
+  112, 72, 232, 72, 72, 112, 4, 7, 7, 6, 1, 0, 80, 160, 144, 208,
+  176, 144, 144, 4, 7, 7, 6, 1, 0, 64, 32, 96, 144, 144, 144, 96,
+  4, 7, 7, 6, 1, 0, 32, 64, 96, 144, 144, 144, 96, 4, 7, 7,
+  6, 1, 0, 32, 80, 96, 144, 144, 144, 96, 4, 7, 7, 6, 1, 0,
+  80, 160, 96, 144, 144, 144, 96, 4, 7, 7, 6, 1, 0, 80, 0, 96,
+  144, 144, 144, 96, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 4,
+  8, 8, 6, 1, 255, 16, 112, 176, 176, 208, 208, 224, 128, 4, 7, 7,
+  6, 1, 0, 64, 32, 144, 144, 144, 144, 96, 4, 7, 7, 6, 1, 0,
+  32, 64, 144, 144, 144, 144, 96, 4, 7, 7, 6, 1, 0, 32, 80, 144,
+  144, 144, 144, 96, 4, 7, 7, 6, 1, 0, 80, 0, 144, 144, 144, 144,
+  96, 5, 7, 7, 6, 0, 0, 16, 32, 136, 80, 32, 32, 32, 4, 6,
+  6, 6, 1, 0, 128, 224, 144, 144, 224, 128, 4, 6, 6, 6, 1, 0,
+  96, 144, 160, 160, 144, 160, 4, 7, 7, 6, 1, 0, 64, 32, 0, 112,
+  144, 144, 112, 4, 7, 7, 6, 1, 0, 32, 64, 0, 112, 144, 144, 112,
+  4, 7, 7, 6, 1, 0, 32, 80, 0, 112, 144, 144, 112, 4, 7, 7,
+  6, 1, 0, 80, 160, 0, 112, 144, 144, 112, 4, 6, 6, 6, 1, 0,
+  80, 0, 112, 144, 144, 112, 4, 7, 7, 6, 1, 0, 32, 80, 32, 112,
+  144, 144, 112, 5, 4, 4, 6, 0, 0, 112, 168, 176, 120, 4, 6, 6,
+  6, 1, 254, 112, 128, 128, 112, 32, 64, 4, 7, 7, 6, 1, 0, 64,
+  32, 0, 96, 176, 192, 112, 4, 7, 7, 6, 1, 0, 32, 64, 0, 96,
+  176, 192, 112, 4, 7, 7, 6, 1, 0, 32, 80, 0, 96, 176, 192, 112,
+  4, 6, 6, 6, 1, 0, 80, 0, 96, 176, 192, 112, 3, 7, 7, 6,
+  1, 0, 128, 64, 0, 192, 64, 64, 224, 3, 7, 7, 6, 1, 0, 32,
+  64, 0, 192, 64, 64, 224, 3, 7, 7, 6, 1, 0, 64, 160, 0, 192,
+  64, 64, 224, 3, 6, 6, 6, 1, 0, 160, 0, 192, 64, 64, 224, 4,
+  7, 7, 6, 1, 0, 48, 96, 16, 112, 144, 144, 96, 4, 7, 7, 6,
+  1, 0, 80, 160, 0, 224, 144, 144, 144, 4, 7, 7, 6, 1, 0, 64,
+  32, 0, 96, 144, 144, 96, 4, 7, 7, 6, 1, 0, 32, 64, 0, 96,
+  144, 144, 96, 4, 7, 7, 6, 1, 0, 32, 80, 0, 96, 144, 144, 96,
+  4, 7, 7, 6, 1, 0, 80, 160, 0, 96, 144, 144, 96, 4, 6, 6,
+  6, 1, 0, 80, 0, 96, 144, 144, 96, 5, 5, 5, 6, 0, 0, 32,
+  0, 248, 0, 32, 4, 4, 4, 6, 1, 0, 112, 176, 208, 224, 4, 7,
+  7, 6, 1, 0, 64, 32, 0, 144, 144, 144, 112, 4, 7, 7, 6, 1,
+  0, 32, 64, 0, 144, 144, 144, 112, 4, 7, 7, 6, 1, 0, 32, 80,
+  0, 144, 144, 144, 112, 4, 6, 6, 6, 1, 0, 80, 0, 144, 144, 144,
+  112, 4, 9, 9, 6, 1, 254, 32, 64, 0, 144, 144, 144, 112, 144, 96,
+  4, 8, 8, 6, 1, 254, 128, 128, 224, 144, 144, 224, 128, 128, 4, 8,
+  8, 6, 1, 254, 80, 0, 144, 144, 144, 112, 144, 96
+};

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_HD44780_C.h

@@ -0,0 +1,194 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+  Fontname: HD44780_C v1.2
+  Copyright: A. Hardtung, public domain
+  Capital A Height: 7, '1' Height: 7
+  Calculated Max Values w= 5 h= 8 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 8
+  Font Bounding box     w= 6 h= 9 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
+  Pure Font   ascent = 7 descent=-1
+  X Font      ascent = 7 descent=-1
+  Max Font    ascent = 8 descent=-1
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t HD44780_C_5x7[2522] U8G_SECTION(".progmem.HD44780_C_5x7") = {
+  0, 6, 9, 0, 254, 7, 1, 145, 3, 34, 32, 255, 255, 8, 255, 7,
+  255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
+  128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
+  0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
+  120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
+  64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
+  2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
+  64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
+  32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
+  5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
+  64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
+  192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
+  0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
+  192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
+  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
+  5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
+  6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
+  48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
+  32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
+  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5,
+  5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
+  192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
+  32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
+  0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
+  8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168,
+  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7,
+  7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0,
+  0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144,
+  136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
+  128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5,
+  7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6,
+  0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128,
+  128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
+  16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136,
+  5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7,
+  6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0,
+  136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136,
+  136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128,
+  128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7,
+  7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0,
+  0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32,
+  32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136,
+  136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5,
+  7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6,
+  0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136,
+  136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32,
+  64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224,
+  5, 7, 7, 6, 0, 0, 32, 112, 160, 160, 168, 112, 32, 3, 7, 7,
+  6, 1, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4,
+  32, 80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5,
+  128, 64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7,
+  6, 0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0,
+  112, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136,
+  136, 120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7,
+  6, 0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255,
+  112, 136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200,
+  136, 136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128,
+  3, 8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7,
+  7, 6, 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1,
+  0, 192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168,
+  168, 168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5,
+  5, 6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240,
+  136, 136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8,
+  8, 5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6,
+  0, 0, 112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224,
+  64, 64, 72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5,
+  5, 5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0,
+  136, 136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136,
+  5, 6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6,
+  0, 0, 248, 16, 32, 64, 248, 5, 5, 5, 6, 0, 2, 184, 168, 168,
+  168, 184, 5, 5, 5, 6, 0, 2, 184, 136, 184, 160, 184, 5, 5, 5,
+  6, 0, 2, 184, 160, 184, 136, 184, 5, 6, 6, 6, 0, 1, 8, 40,
+  72, 248, 64, 32, 5, 5, 5, 6, 0, 0, 56, 112, 224, 136, 240, 0,
+  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
+  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
+  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
+  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
+  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
+  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
+  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
+  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
+  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
+  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
+  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
+  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 5,
+  7, 7, 6, 0, 0, 248, 136, 128, 240, 136, 136, 240, 5, 7, 7, 6,
+  0, 0, 248, 136, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 80,
+  0, 248, 128, 240, 128, 248, 5, 7, 7, 6, 0, 0, 168, 168, 168, 112,
+  168, 168, 168, 5, 7, 7, 6, 0, 0, 240, 8, 8, 112, 8, 8, 240,
+  5, 7, 7, 6, 0, 0, 136, 136, 152, 168, 200, 136, 136, 5, 8, 8,
+  6, 0, 0, 80, 32, 136, 152, 168, 168, 200, 136, 5, 7, 7, 6, 0,
+  0, 120, 40, 40, 40, 40, 168, 72, 5, 7, 7, 6, 0, 0, 248, 136,
+  136, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 136, 136, 136, 80, 32,
+  64, 128, 5, 7, 7, 6, 0, 0, 32, 112, 168, 168, 168, 112, 32, 5,
+  7, 7, 6, 0, 0, 136, 136, 136, 120, 8, 8, 8, 5, 7, 7, 6,
+  0, 0, 168, 168, 168, 168, 168, 168, 248, 5, 7, 7, 6, 0, 0, 192,
+  64, 64, 112, 72, 72, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 200,
+  168, 168, 200, 5, 7, 7, 6, 0, 0, 112, 136, 8, 56, 8, 136, 112,
+  5, 7, 7, 6, 0, 0, 144, 168, 168, 232, 168, 168, 144, 5, 7, 7,
+  6, 0, 0, 120, 136, 136, 120, 40, 72, 136, 5, 7, 7, 6, 0, 0,
+  24, 96, 128, 240, 136, 136, 112, 4, 5, 5, 6, 0, 0, 224, 144, 224,
+  144, 224, 5, 5, 5, 6, 0, 0, 248, 136, 128, 128, 128, 5, 7, 7,
+  6, 0, 0, 80, 0, 112, 136, 248, 128, 112, 5, 5, 5, 6, 0, 0,
+  168, 168, 112, 168, 168, 5, 5, 5, 6, 0, 0, 240, 8, 48, 8, 240,
+  5, 5, 5, 6, 0, 0, 136, 152, 168, 200, 136, 5, 7, 7, 6, 0,
+  0, 80, 32, 136, 152, 168, 200, 136, 4, 5, 5, 6, 0, 0, 144, 160,
+  192, 160, 144, 5, 5, 5, 6, 0, 0, 248, 40, 40, 168, 72, 5, 5,
+  5, 6, 0, 0, 136, 216, 168, 136, 136, 5, 5, 5, 6, 0, 0, 136,
+  136, 248, 136, 136, 5, 5, 5, 6, 0, 0, 248, 136, 136, 136, 136, 5,
+  5, 5, 6, 0, 0, 248, 32, 32, 32, 32, 5, 5, 5, 6, 0, 0,
+  136, 136, 120, 8, 8, 5, 5, 5, 6, 0, 0, 168, 168, 168, 168, 248,
+  5, 5, 5, 6, 0, 0, 192, 64, 112, 72, 112, 5, 5, 5, 6, 0,
+  0, 136, 136, 200, 168, 200, 4, 5, 5, 6, 0, 0, 128, 128, 224, 144,
+  224, 5, 5, 5, 6, 0, 0, 112, 136, 56, 136, 112, 5, 5, 5, 6,
+  0, 0, 144, 168, 232, 168, 144, 5, 5, 5, 6, 0, 0, 120, 136, 120,
+  40, 72, 5, 5, 5, 6, 0, 1, 32, 72, 144, 72, 32, 5, 5, 5,
+  6, 0, 1, 32, 144, 72, 144, 32, 5, 3, 3, 6, 0, 0, 72, 144,
+  216, 5, 3, 3, 6, 0, 4, 216, 72, 144, 5, 7, 7, 6, 0, 0,
+  144, 208, 176, 144, 56, 40, 56, 5, 7, 7, 6, 0, 0, 32, 0, 32,
+  64, 128, 136, 112, 5, 7, 7, 6, 0, 0, 24, 32, 32, 112, 32, 32,
+  192, 5, 7, 7, 6, 0, 0, 32, 80, 64, 240, 64, 64, 120, 1, 2,
+  2, 6, 2, 0, 128, 128, 1, 4, 4, 6, 2, 0, 128, 128, 128, 128,
+  3, 5, 5, 6, 1, 0, 160, 160, 160, 0, 224, 3, 5, 5, 6, 1,
+  0, 160, 160, 160, 0, 160, 5, 7, 7, 6, 0, 0, 160, 0, 232, 16,
+  32, 64, 128, 5, 5, 5, 6, 0, 1, 216, 112, 32, 112, 216, 5, 7,
+  7, 6, 0, 0, 160, 64, 168, 16, 32, 64, 128, 3, 6, 6, 6, 1,
+  1, 224, 64, 64, 64, 64, 224, 5, 6, 6, 6, 0, 1, 248, 80, 80,
+  80, 80, 248, 5, 7, 7, 6, 0, 0, 32, 112, 168, 32, 32, 32, 32,
+  5, 7, 7, 6, 0, 0, 32, 32, 32, 32, 168, 112, 32, 5, 7, 7,
+  6, 0, 0, 128, 144, 176, 248, 176, 144, 128, 5, 7, 7, 6, 0, 0,
+  8, 72, 104, 248, 104, 72, 8, 5, 7, 7, 6, 0, 0, 128, 136, 168,
+  248, 168, 136, 128, 5, 7, 7, 6, 0, 0, 128, 224, 136, 16, 32, 64,
+  128, 2, 2, 2, 6, 2, 2, 192, 192, 5, 8, 8, 6, 0, 255, 120,
+  40, 40, 40, 72, 136, 248, 136, 5, 8, 8, 6, 0, 255, 136, 136, 136,
+  136, 136, 136, 248, 8, 5, 8, 8, 6, 0, 255, 168, 168, 168, 168, 168,
+  168, 248, 8, 5, 6, 6, 6, 0, 255, 120, 40, 72, 136, 248, 136, 5,
+  7, 7, 6, 0, 255, 32, 32, 112, 168, 168, 112, 32, 5, 6, 6, 6,
+  0, 255, 136, 136, 136, 136, 248, 8, 5, 6, 6, 6, 0, 255, 168, 168,
+  168, 168, 248, 8, 2, 2, 2, 6, 2, 6, 64, 128, 3, 1, 1, 6,
+  1, 7, 160, 5, 2, 2, 6, 0, 6, 72, 176, 5, 8, 8, 6, 0,
+  0, 16, 32, 0, 112, 136, 248, 128, 112, 5, 6, 6, 6, 0, 255, 112,
+  128, 136, 112, 32, 96, 3, 7, 7, 6, 1, 0, 160, 0, 160, 160, 160,
+  32, 192, 5, 6, 6, 6, 0, 1, 32, 112, 112, 112, 248, 32, 5, 5,
+  5, 6, 0, 1, 80, 0, 136, 0, 80, 5, 5, 5, 6, 0, 1, 112,
+  136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 136, 144, 168, 88, 184, 8,
+  8, 5, 7, 7, 6, 0, 0, 136, 144, 184, 72, 184, 8, 56, 5, 7,
+  7, 6, 0, 0, 136, 144, 184, 72, 152, 32, 56, 5, 8, 8, 6, 0,
+  0, 192, 64, 192, 72, 216, 56, 8, 8, 5, 7, 7, 6, 0, 0, 136,
+  248, 136, 248, 136, 248, 136, 4, 5, 5, 6, 0, 2, 192, 0, 48, 0,
+  96, 5, 8, 8, 6, 0, 0, 64, 160, 224, 168, 8, 40, 120, 32, 5,
+  8, 8, 6, 0, 0, 64, 112, 64, 120, 64, 112, 64, 224, 5, 8, 8,
+  6, 0, 0, 32, 112, 32, 248, 32, 112, 32, 112, 5, 7, 7, 6, 0,
+  0, 104, 0, 232, 0, 104, 16, 56, 5, 8, 8, 6, 0, 0, 16, 112,
+  16, 240, 16, 112, 16, 56, 5, 7, 7, 6, 0, 1, 32, 112, 32, 248,
+  32, 112, 32, 5, 8, 8, 6, 0, 0, 16, 144, 80, 48, 80, 144, 16,
+  56, 5, 8, 8, 6, 0, 0, 48, 72, 32, 80, 80, 32, 144, 96, 5,
+  7, 7, 6, 0, 0, 120, 168, 168, 120, 40, 40, 40, 5, 8, 8, 6,
+  0, 0, 248, 248, 248, 248, 248, 248, 248, 248
+};

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_HD44780_J.h

@@ -0,0 +1,192 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+  Fontname: HD44780_J
+  Copyright: A. Hardtung, public domain
+  Capital A Height: 7, '1' Height: 7
+  Calculated Max Values w= 6 h=10 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 8
+  Font Bounding box     w= 6 h= 9 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-2 dx= 0 dy= 0
+  Pure Font   ascent = 7 descent=-1
+  X Font      ascent = 7 descent=-1
+  Max Font    ascent = 8 descent=-2
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t HD44780_J_5x7[2492] U8G_SECTION(".progmem.HD44780_J_5x7") = {
+  0, 6, 9, 0, 254, 7, 1, 145, 3, 34, 32, 255, 255, 8, 254, 7,
+  255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
+  128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
+  0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
+  120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
+  64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
+  2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
+  64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
+  32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
+  5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
+  64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
+  192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
+  0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
+  192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
+  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
+  5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
+  6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
+  48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
+  32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
+  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5,
+  5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
+  192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
+  32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
+  0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
+  8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168,
+  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7,
+  7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0,
+  0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144,
+  136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
+  128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5,
+  7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6,
+  0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128,
+  128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
+  16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136,
+  5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7,
+  6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0,
+  136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136,
+  136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128,
+  128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7,
+  7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0,
+  0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32,
+  32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136,
+  136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5,
+  7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6,
+  0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136,
+  136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32,
+  64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224,
+  5, 7, 7, 6, 0, 0, 136, 80, 248, 32, 248, 32, 32, 3, 7, 7,
+  6, 1, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4,
+  32, 80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5,
+  128, 64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7,
+  6, 0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0,
+  112, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136,
+  136, 120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7,
+  6, 0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255,
+  112, 136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200,
+  136, 136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128,
+  3, 8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7,
+  7, 6, 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1,
+  0, 192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168,
+  168, 168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5,
+  5, 6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240,
+  136, 136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8,
+  8, 5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6,
+  0, 0, 112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224,
+  64, 64, 72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5,
+  5, 5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0,
+  136, 136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136,
+  5, 6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6,
+  0, 0, 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64,
+  128, 64, 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128,
+  128, 3, 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 5,
+  5, 6, 0, 1, 32, 16, 248, 16, 32, 5, 5, 5, 6, 0, 1, 32,
+  64, 248, 64, 32, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
+  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
+  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
+  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
+  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
+  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
+  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
+  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
+  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
+  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
+  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
+  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
+  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 3, 3, 3, 6, 0, 0,
+  224, 160, 224, 3, 4, 4, 6, 2, 3, 224, 128, 128, 128, 3, 4, 4,
+  6, 0, 0, 32, 32, 32, 224, 3, 3, 3, 6, 0, 0, 128, 64, 32,
+  2, 2, 2, 6, 1, 2, 192, 192, 5, 6, 6, 6, 0, 0, 248, 8,
+  248, 8, 16, 32, 5, 5, 5, 6, 0, 0, 248, 8, 48, 32, 64, 4,
+  5, 5, 6, 0, 0, 16, 32, 96, 160, 32, 5, 5, 5, 6, 0, 0,
+  32, 248, 136, 8, 48, 5, 4, 4, 6, 0, 0, 248, 32, 32, 248, 5,
+  5, 5, 6, 0, 0, 16, 248, 48, 80, 144, 5, 5, 5, 6, 0, 0,
+  64, 248, 72, 80, 64, 5, 4, 4, 6, 0, 0, 112, 16, 16, 248, 4,
+  5, 5, 6, 0, 0, 240, 16, 240, 16, 240, 5, 4, 4, 6, 0, 0,
+  168, 168, 8, 48, 5, 1, 1, 6, 0, 3, 248, 5, 7, 7, 6, 0,
+  0, 248, 8, 40, 48, 32, 32, 64, 5, 7, 7, 6, 0, 0, 8, 16,
+  32, 96, 160, 32, 32, 5, 7, 7, 6, 0, 0, 32, 248, 136, 136, 8,
+  16, 32, 5, 6, 6, 6, 0, 0, 248, 32, 32, 32, 32, 248, 5, 7,
+  7, 6, 0, 0, 16, 248, 16, 48, 80, 144, 16, 5, 7, 7, 6, 0,
+  0, 64, 248, 72, 72, 72, 72, 144, 5, 7, 7, 6, 0, 0, 32, 248,
+  32, 248, 32, 32, 32, 5, 6, 6, 6, 0, 0, 120, 72, 136, 8, 16,
+  96, 5, 7, 7, 6, 0, 0, 64, 120, 144, 16, 16, 16, 32, 5, 6,
+  6, 6, 0, 0, 248, 8, 8, 8, 8, 248, 5, 7, 7, 6, 0, 0,
+  80, 248, 80, 80, 16, 32, 64, 5, 6, 6, 6, 0, 0, 192, 8, 200,
+  8, 16, 224, 5, 6, 6, 6, 0, 0, 248, 8, 16, 32, 80, 136, 5,
+  7, 7, 6, 0, 0, 64, 248, 72, 80, 64, 64, 56, 5, 6, 6, 6,
+  0, 0, 136, 136, 72, 8, 16, 96, 5, 6, 6, 6, 0, 0, 120, 72,
+  168, 24, 16, 96, 5, 7, 7, 6, 0, 0, 16, 224, 32, 248, 32, 32,
+  64, 5, 6, 6, 6, 0, 0, 168, 168, 168, 8, 16, 32, 5, 7, 7,
+  6, 0, 0, 112, 0, 248, 32, 32, 32, 64, 3, 7, 7, 6, 1, 0,
+  128, 128, 128, 192, 160, 128, 128, 5, 7, 7, 6, 0, 0, 32, 32, 248,
+  32, 32, 64, 128, 5, 6, 6, 6, 0, 0, 112, 0, 0, 0, 0, 248,
+  5, 6, 6, 6, 0, 0, 248, 8, 80, 32, 80, 128, 5, 7, 7, 6,
+  0, 0, 32, 248, 16, 32, 112, 168, 32, 3, 7, 7, 6, 1, 0, 32,
+  32, 32, 32, 32, 64, 128, 5, 6, 6, 6, 0, 0, 32, 16, 136, 136,
+  136, 136, 5, 7, 7, 6, 0, 0, 128, 128, 248, 128, 128, 128, 120, 5,
+  6, 6, 6, 0, 0, 248, 8, 8, 8, 16, 96, 5, 5, 5, 6, 0,
+  1, 64, 160, 16, 8, 8, 5, 7, 7, 6, 0, 0, 32, 248, 32, 32,
+  168, 168, 32, 5, 6, 6, 6, 0, 0, 248, 8, 8, 80, 32, 16, 4,
+  6, 6, 6, 1, 0, 224, 0, 224, 0, 224, 16, 5, 6, 6, 6, 0,
+  0, 32, 64, 128, 136, 248, 8, 5, 6, 6, 6, 0, 0, 8, 8, 80,
+  32, 80, 128, 5, 6, 6, 6, 0, 0, 248, 64, 248, 64, 64, 56, 5,
+  7, 7, 6, 0, 0, 64, 64, 248, 72, 80, 64, 64, 5, 7, 7, 6,
+  0, 0, 112, 16, 16, 16, 16, 16, 248, 5, 6, 6, 6, 0, 0, 248,
+  8, 248, 8, 8, 248, 5, 7, 7, 6, 0, 0, 112, 0, 248, 8, 8,
+  16, 32, 4, 7, 7, 6, 0, 0, 144, 144, 144, 144, 16, 32, 64, 5,
+  6, 6, 6, 0, 0, 32, 160, 160, 168, 168, 176, 5, 7, 7, 6, 0,
+  0, 128, 128, 128, 136, 144, 160, 192, 5, 6, 6, 6, 0, 0, 248, 136,
+  136, 136, 136, 248, 5, 6, 6, 6, 0, 0, 248, 136, 136, 8, 16, 32,
+  5, 6, 6, 6, 0, 0, 192, 0, 8, 8, 16, 224, 4, 3, 3, 6,
+  0, 4, 32, 144, 64, 3, 3, 3, 6, 0, 4, 224, 160, 224, 5, 5,
+  5, 6, 0, 1, 72, 168, 144, 144, 104, 5, 7, 7, 6, 0, 0, 80,
+  0, 112, 8, 120, 136, 120, 4, 8, 8, 6, 1, 255, 96, 144, 144, 224,
+  144, 144, 224, 128, 5, 5, 5, 6, 0, 0, 112, 128, 96, 136, 112, 5,
+  6, 6, 6, 0, 255, 136, 136, 152, 232, 136, 128, 5, 5, 5, 6, 0,
+  0, 120, 160, 144, 136, 112, 5, 7, 7, 6, 0, 254, 48, 72, 136, 136,
+  240, 128, 128, 5, 8, 8, 6, 0, 254, 120, 136, 136, 136, 120, 8, 8,
+  112, 5, 5, 5, 6, 0, 1, 56, 32, 32, 160, 64, 4, 3, 3, 6,
+  0, 3, 16, 208, 16, 4, 8, 8, 6, 0, 255, 16, 0, 48, 16, 16,
+  16, 144, 96, 3, 3, 3, 6, 0, 4, 160, 64, 160, 5, 7, 7, 6,
+  0, 0, 32, 112, 160, 160, 168, 112, 32, 5, 7, 7, 6, 0, 0, 64,
+  64, 224, 64, 224, 64, 120, 5, 7, 7, 6, 0, 0, 112, 0, 176, 200,
+  136, 136, 136, 5, 7, 7, 6, 0, 0, 80, 0, 112, 136, 136, 136, 112,
+  5, 7, 7, 6, 0, 255, 176, 200, 136, 136, 240, 128, 128, 5, 7, 7,
+  6, 0, 255, 104, 152, 136, 136, 120, 8, 8, 5, 6, 6, 6, 0, 0,
+  112, 136, 248, 136, 136, 112, 5, 3, 3, 6, 0, 2, 88, 168, 208, 5,
+  5, 5, 6, 0, 0, 112, 136, 136, 80, 216, 5, 7, 7, 6, 0, 0,
+  80, 0, 136, 136, 136, 152, 104, 5, 7, 7, 6, 0, 0, 248, 128, 64,
+  32, 64, 128, 248, 5, 5, 5, 6, 0, 0, 248, 80, 80, 80, 152, 5,
+  7, 7, 6, 0, 0, 248, 0, 136, 80, 32, 80, 136, 5, 7, 7, 6,
+  0, 255, 136, 136, 136, 136, 120, 8, 112, 5, 6, 6, 6, 0, 0, 8,
+  240, 32, 248, 32, 32, 5, 5, 5, 6, 0, 0, 248, 64, 120, 72, 136,
+  5, 5, 5, 6, 0, 0, 248, 168, 248, 136, 136, 5, 5, 5, 6, 0,
+  1, 32, 0, 248, 0, 32, 0, 0, 0, 6, 0, 0, 6, 10, 10, 6,
+  0, 254, 252, 252, 252, 252, 252, 252, 252, 252, 252, 252
+};

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_HD44780_W.h

@@ -0,0 +1,226 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+  Fontname: HD44780_W
+  Copyright: A.Hardtung, public domain
+  Capital A Height: 7, '1' Height: 7
+  Calculated Max Values w= 5 h= 9 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 9
+  Font Bounding box     w= 6 h= 9 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
+  Pure Font   ascent = 7 descent=-1
+  X Font      ascent = 7 descent=-1
+  Max Font    ascent = 8 descent=-1
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t HD44780_W_5x7[3034] U8G_SECTION(".progmem.HD44780_W_5x7") = {
+  0, 6, 9, 0, 254, 7, 2, 79, 3, 222, 16, 255, 255, 8, 255, 7,
+  255, 4, 7, 7, 6, 0, 0, 16, 48, 112, 240, 112, 48, 16, 4, 7,
+  7, 6, 1, 0, 128, 192, 224, 240, 224, 192, 128, 5, 3, 3, 6, 0,
+  4, 216, 72, 144, 5, 3, 3, 6, 0, 4, 216, 144, 72, 5, 7, 7,
+  6, 0, 0, 32, 112, 248, 0, 32, 112, 248, 5, 7, 7, 6, 0, 0,
+  248, 112, 32, 0, 248, 112, 32, 5, 5, 5, 6, 0, 1, 112, 248, 248,
+  248, 112, 5, 7, 7, 6, 0, 0, 8, 8, 40, 72, 248, 64, 32, 5,
+  7, 7, 6, 0, 0, 32, 112, 168, 32, 32, 32, 32, 5, 7, 7, 6,
+  0, 0, 32, 32, 32, 32, 168, 112, 32, 5, 5, 5, 6, 0, 1, 32,
+  64, 248, 64, 32, 5, 5, 5, 6, 0, 1, 32, 16, 248, 16, 32, 5,
+  7, 7, 6, 0, 0, 16, 32, 64, 32, 16, 0, 248, 5, 7, 7, 6,
+  0, 0, 64, 32, 16, 32, 64, 0, 248, 5, 5, 5, 6, 0, 1, 32,
+  32, 112, 112, 248, 5, 5, 5, 6, 0, 0, 248, 112, 112, 32, 32, 0,
+  0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128,
+  0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6, 0, 0,
+  80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32, 120, 160,
+  112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32, 64, 152,
+  24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104, 2, 3,
+  3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32, 64, 128,
+  128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32, 32, 64,
+  128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5, 5, 6,
+  0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192, 64, 128,
+  5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192, 192, 5,
+  5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0,
+  112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64, 192, 64,
+  64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112, 128, 128,
+  248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240, 5, 7,
+  7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7, 6, 0,
+  0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0, 48, 64,
+  128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32, 32,
+  32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136, 112, 5,
+  7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5, 5, 6,
+  2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192, 192, 0,
+  192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64, 32, 16,
+  5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1, 0, 128,
+  64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136, 8, 16,
+  32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168, 112, 5,
+  7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7, 7, 6,
+  0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0, 0, 112,
+  136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144, 136, 136,
+  136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 248,
+  5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5, 7, 7,
+  6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6, 0, 0,
+  136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128, 128, 128,
+  128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16, 16, 144,
+  96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136, 5, 7,
+  7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7, 6, 0,
+  0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 136, 136,
+  200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 136,
+  136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128, 128, 5,
+  7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7, 7, 6,
+  0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0, 0, 120,
+  128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32, 32, 32,
+  32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 136, 112,
+  5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5, 7, 7,
+  6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6, 0, 0,
+  136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136, 136, 136,
+  80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32, 64, 128,
+  248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224, 5, 5,
+  5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, 1, 0, 224,
+  32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, 80, 136, 5,
+  1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, 64, 5, 5,
+  5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0, 0, 128,
+  128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, 128, 128, 136,
+  112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, 120, 5, 5,
+  5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, 0, 0, 48,
+  72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, 136, 136, 120,
+  8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, 136, 136, 1,
+  7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 8, 8, 6,
+  1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, 6, 0, 0,
+  128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, 192, 64, 64,
+  64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, 168, 168, 5,
+  5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, 6, 0, 0,
+  112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, 136, 240, 128,
+  128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, 5, 5, 5,
+  6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, 0, 112, 128,
+  112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, 64, 64, 72, 48,
+  5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, 5, 6, 0,
+  0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, 136, 168, 168,
+  80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, 6, 6, 6,
+  0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, 0, 248, 16,
+  32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, 64, 64, 32,
+  1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, 3, 7, 7,
+  6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 6, 6, 6, 0, 1,
+  8, 40, 72, 248, 64, 32, 5, 7, 7, 6, 0, 0, 32, 80, 136, 136,
+  136, 136, 248, 5, 7, 7, 6, 0, 0, 248, 136, 128, 240, 136, 136, 240,
+  5, 8, 8, 6, 0, 255, 120, 40, 40, 40, 72, 136, 248, 136, 5, 7,
+  7, 6, 0, 0, 168, 168, 168, 112, 168, 168, 168, 5, 7, 7, 6, 0,
+  0, 240, 8, 8, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 136, 136,
+  152, 168, 200, 136, 136, 5, 8, 8, 6, 0, 0, 80, 32, 136, 152, 168,
+  168, 200, 136, 5, 7, 7, 6, 0, 0, 120, 40, 40, 40, 40, 168, 72,
+  5, 7, 7, 6, 0, 0, 248, 136, 136, 136, 136, 136, 136, 5, 7, 7,
+  6, 0, 0, 136, 136, 136, 80, 32, 64, 128, 5, 8, 8, 6, 0, 255,
+  136, 136, 136, 136, 136, 136, 248, 8, 5, 7, 7, 6, 0, 0, 136, 136,
+  136, 120, 8, 8, 8, 5, 7, 7, 6, 0, 0, 168, 168, 168, 168, 168,
+  168, 248, 5, 8, 8, 6, 0, 255, 168, 168, 168, 168, 168, 168, 248, 8,
+  5, 7, 7, 6, 0, 0, 192, 64, 64, 112, 72, 72, 112, 5, 7, 7,
+  6, 0, 0, 136, 136, 136, 200, 168, 168, 200, 5, 7, 7, 6, 0, 0,
+  112, 136, 40, 80, 8, 136, 112, 5, 5, 5, 6, 0, 0, 64, 160, 144,
+  144, 104, 5, 7, 7, 6, 0, 0, 32, 48, 40, 40, 32, 224, 224, 5,
+  7, 7, 6, 0, 0, 248, 136, 128, 128, 128, 128, 128, 5, 5, 5, 6,
+  0, 0, 248, 80, 80, 80, 152, 5, 7, 7, 6, 0, 0, 248, 128, 64,
+  32, 64, 128, 248, 5, 5, 5, 6, 0, 0, 120, 144, 144, 144, 96, 5,
+  7, 7, 6, 0, 0, 48, 40, 56, 40, 200, 216, 24, 5, 6, 6, 6,
+  0, 0, 8, 112, 160, 32, 32, 16, 5, 6, 6, 6, 0, 1, 32, 112,
+  112, 112, 248, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136,
+  112, 5, 5, 5, 6, 0, 0, 112, 136, 136, 80, 216, 5, 7, 7, 6,
+  0, 0, 48, 72, 32, 80, 136, 136, 112, 5, 3, 3, 6, 0, 2, 88,
+  168, 208, 5, 6, 6, 6, 0, 0, 80, 248, 248, 248, 112, 32, 5, 5,
+  5, 6, 0, 0, 112, 128, 96, 136, 112, 5, 7, 7, 6, 0, 0, 112,
+  136, 136, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 216, 216, 216, 216,
+  216, 216, 216, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128,
+  5, 7, 7, 6, 0, 0, 32, 112, 160, 160, 168, 112, 32, 5, 7, 7,
+  6, 0, 0, 48, 64, 64, 224, 64, 80, 168, 5, 5, 5, 6, 0, 0,
+  136, 112, 80, 112, 136, 5, 7, 7, 6, 0, 0, 136, 80, 248, 32, 248,
+  32, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 0, 128, 128, 128, 5,
+  8, 8, 6, 0, 0, 48, 72, 32, 80, 80, 32, 144, 96, 5, 7, 7,
+  6, 0, 0, 24, 32, 32, 112, 32, 32, 192, 5, 7, 7, 6, 0, 0,
+  248, 136, 184, 184, 184, 136, 248, 5, 7, 7, 6, 0, 0, 112, 8, 120,
+  136, 120, 0, 248, 5, 5, 5, 6, 0, 1, 40, 80, 160, 80, 40, 5,
+  7, 7, 6, 0, 0, 144, 168, 168, 232, 168, 168, 144, 5, 7, 7, 6,
+  0, 0, 120, 136, 136, 120, 40, 72, 136, 5, 7, 7, 6, 0, 0, 248,
+  136, 168, 136, 152, 168, 248, 2, 3, 3, 6, 2, 4, 64, 128, 192, 4,
+  5, 5, 6, 0, 3, 96, 144, 144, 144, 96, 5, 7, 7, 6, 0, 0,
+  32, 32, 248, 32, 32, 0, 248, 4, 5, 5, 6, 0, 3, 96, 144, 32,
+  64, 240, 3, 5, 5, 6, 0, 3, 224, 32, 224, 32, 224, 5, 8, 8,
+  6, 0, 0, 224, 144, 224, 128, 144, 184, 144, 24, 5, 8, 8, 6, 0,
+  255, 136, 136, 136, 136, 152, 232, 128, 128, 5, 7, 7, 6, 0, 0, 120,
+  152, 152, 120, 24, 24, 24, 2, 2, 2, 6, 2, 2, 192, 192, 5, 5,
+  5, 6, 0, 0, 80, 136, 168, 168, 80, 3, 5, 5, 6, 0, 3, 64,
+  192, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 112, 0,
+  248, 5, 5, 5, 6, 0, 1, 160, 80, 40, 80, 160, 5, 7, 7, 6,
+  0, 0, 136, 144, 168, 88, 184, 8, 8, 5, 7, 7, 6, 0, 0, 136,
+  144, 184, 72, 152, 32, 56, 5, 8, 8, 6, 0, 0, 192, 64, 192, 72,
+  216, 56, 8, 8, 5, 7, 7, 6, 0, 0, 32, 0, 32, 64, 128, 136,
+  112, 5, 8, 8, 6, 0, 0, 64, 32, 32, 80, 136, 248, 136, 136, 5,
+  8, 8, 6, 0, 0, 16, 32, 32, 80, 136, 248, 136, 136, 5, 8, 8,
+  6, 0, 0, 32, 80, 0, 112, 136, 248, 136, 136, 5, 8, 8, 6, 0,
+  0, 104, 144, 0, 112, 136, 248, 136, 136, 5, 8, 8, 6, 0, 0, 80,
+  0, 32, 80, 136, 248, 136, 136, 5, 8, 8, 6, 0, 0, 32, 80, 32,
+  112, 136, 248, 136, 136, 5, 7, 7, 6, 0, 0, 56, 96, 160, 184, 224,
+  160, 184, 5, 8, 8, 6, 0, 255, 112, 136, 128, 128, 136, 112, 32, 96,
+  5, 8, 8, 6, 0, 0, 64, 32, 0, 248, 128, 240, 128, 248, 5, 8,
+  8, 6, 0, 0, 8, 16, 0, 248, 128, 240, 128, 248, 5, 8, 8, 6,
+  0, 0, 32, 80, 0, 248, 128, 240, 128, 248, 5, 7, 7, 6, 0, 0,
+  80, 0, 248, 128, 240, 128, 248, 3, 8, 8, 6, 1, 0, 128, 64, 0,
+  224, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 32, 64, 0, 224, 64,
+  64, 64, 224, 3, 8, 8, 6, 1, 0, 64, 160, 0, 224, 64, 64, 64,
+  224, 3, 7, 7, 6, 1, 0, 160, 0, 224, 64, 64, 64, 224, 5, 7,
+  7, 6, 0, 0, 112, 72, 72, 232, 72, 72, 112, 5, 8, 8, 6, 0,
+  0, 104, 144, 0, 136, 200, 168, 152, 136, 5, 8, 8, 6, 0, 0, 64,
+  32, 112, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 16, 32, 112,
+  136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 136,
+  136, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112, 136, 136, 136,
+  112, 5, 8, 8, 6, 0, 0, 80, 0, 112, 136, 136, 136, 136, 112, 5,
+  5, 5, 6, 0, 1, 136, 80, 32, 80, 136, 5, 7, 7, 6, 0, 0,
+  112, 32, 112, 168, 112, 32, 112, 5, 8, 8, 6, 0, 0, 64, 32, 136,
+  136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 16, 32, 136, 136, 136,
+  136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0, 136, 136, 136, 136,
+  112, 5, 8, 8, 6, 0, 0, 80, 0, 136, 136, 136, 136, 136, 112, 5,
+  8, 8, 6, 0, 0, 16, 32, 136, 80, 32, 32, 32, 32, 5, 8, 8,
+  6, 0, 0, 192, 64, 112, 72, 72, 112, 64, 224, 5, 7, 7, 6, 0,
+  0, 48, 72, 72, 112, 72, 72, 176, 5, 8, 8, 6, 0, 0, 64, 32,
+  0, 112, 8, 120, 136, 120, 5, 8, 8, 6, 0, 0, 16, 32, 0, 112,
+  8, 120, 136, 120, 5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 8, 120,
+  136, 120, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112, 8, 120, 136, 120,
+  5, 7, 7, 6, 0, 0, 80, 0, 112, 8, 120, 136, 120, 5, 8, 8,
+  6, 0, 0, 32, 80, 32, 112, 8, 120, 136, 120, 5, 6, 6, 6, 0,
+  0, 208, 40, 120, 160, 168, 80, 5, 6, 6, 6, 0, 255, 112, 128, 136,
+  112, 32, 96, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 248, 128,
+  112, 5, 8, 8, 6, 0, 0, 16, 32, 0, 112, 136, 248, 128, 112, 5,
+  8, 8, 6, 0, 0, 32, 80, 0, 112, 136, 248, 128, 112, 5, 7, 7,
+  6, 0, 0, 80, 0, 112, 136, 248, 128, 112, 3, 8, 8, 6, 1, 0,
+  128, 64, 0, 64, 192, 64, 64, 224, 3, 8, 8, 6, 1, 0, 32, 64,
+  0, 64, 192, 64, 64, 224, 3, 8, 8, 6, 1, 0, 64, 160, 0, 64,
+  192, 64, 64, 224, 3, 7, 7, 6, 1, 0, 160, 0, 64, 192, 64, 64,
+  224, 5, 7, 7, 6, 0, 0, 160, 64, 160, 16, 120, 136, 112, 5, 8,
+  8, 6, 0, 0, 104, 144, 0, 176, 200, 136, 136, 136, 5, 8, 8, 6,
+  0, 0, 64, 32, 0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0,
+  16, 32, 0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80,
+  0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112,
+  136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 80, 0, 112, 136, 136, 136,
+  112, 5, 5, 5, 6, 0, 1, 32, 0, 248, 0, 32, 5, 7, 7, 6,
+  0, 0, 16, 32, 112, 168, 112, 32, 64, 5, 8, 8, 6, 0, 0, 64,
+  32, 0, 136, 136, 136, 152, 104, 5, 8, 8, 6, 0, 0, 16, 32, 0,
+  136, 136, 136, 152, 104, 5, 8, 8, 6, 0, 0, 32, 80, 0, 136, 136,
+  136, 152, 104, 5, 7, 7, 6, 0, 0, 80, 0, 136, 136, 136, 152, 104,
+  5, 9, 9, 6, 0, 255, 16, 32, 0, 136, 136, 136, 248, 8, 112, 4,
+  7, 7, 6, 1, 0, 192, 64, 96, 80, 96, 64, 224, 5, 8, 8, 6,
+  0, 255, 80, 0, 136, 136, 136, 248, 8, 112
+};

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_ISO10646_1.h

@@ -0,0 +1,198 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+  Fontname: ISO10646-1
+  Copyright: A.Hardtung, public domain
+  Capital A Height: 7, '1' Height: 7
+  Calculated Max Values w= 5 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
+  Font Bounding box     w= 6 h= 9 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
+  Pure Font   ascent = 7 descent=-1
+  X Font      ascent = 7 descent=-1
+  Max Font    ascent = 8 descent=-1
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t ISO10646_1_5x7[2592] U8G_SECTION(".progmem.ISO10646_1_5x7") = {
+  0, 6, 9, 0, 254, 7, 1, 146, 3, 33, 32, 255, 255, 8, 255, 7,
+  255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
+  128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
+  0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
+  120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
+  64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
+  2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
+  64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
+  32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
+  5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
+  64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
+  192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
+  0, 0, 112, 136, 136, 136, 136, 136, 112, 3, 7, 7, 6, 1, 0, 64,
+  192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
+  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
+  5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
+  6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
+  112, 128, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
+  32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
+  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 8, 112, 2, 5,
+  5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
+  192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
+  32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
+  0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
+  8, 16, 32, 0, 32, 5, 7, 7, 6, 0, 0, 112, 136, 8, 104, 168,
+  168, 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5,
+  7, 7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6,
+  0, 0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 240,
+  136, 136, 136, 136, 136, 240, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240,
+  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128,
+  5, 7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7,
+  6, 0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0,
+  128, 128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16,
+  16, 16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144,
+  136, 5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7,
+  7, 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0,
+  0, 136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136,
+  136, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128,
+  128, 128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5,
+  7, 7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6,
+  0, 0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248,
+  32, 32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136,
+  136, 136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32,
+  5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7,
+  6, 0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0,
+  136, 136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16,
+  32, 64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128,
+  224, 5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6,
+  1, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32,
+  80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128,
+  64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6,
+  0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112,
+  128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136,
+  120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6,
+  0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112,
+  136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136,
+  136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3,
+  8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7,
+  6, 0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0,
+  192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168,
+  168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5,
+  6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136,
+  136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8,
+  5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0,
+  0, 112, 128, 112, 8, 240, 4, 7, 7, 6, 0, 0, 64, 64, 224, 64,
+  64, 64, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5,
+  5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136,
+  136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5,
+  6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0,
+  0, 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128,
+  64, 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128,
+  3, 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2,
+  6, 0, 2, 104, 144, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
+  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
+  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
+  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
+  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
+  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
+  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
+  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
+  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
+  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
+  0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0,
+  6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0,
+  0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0,
+  0, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 5, 7,
+  7, 6, 0, 0, 32, 112, 168, 160, 168, 112, 32, 5, 7, 7, 6, 0,
+  0, 48, 64, 64, 224, 64, 80, 168, 5, 5, 5, 6, 0, 0, 136, 112,
+  80, 112, 136, 5, 7, 7, 6, 0, 0, 136, 80, 32, 248, 32, 248, 32,
+  1, 7, 7, 6, 2, 0, 128, 128, 128, 0, 128, 128, 128, 5, 8, 8,
+  6, 0, 0, 48, 72, 32, 80, 80, 32, 144, 96, 3, 1, 1, 6, 1,
+  7, 160, 5, 7, 7, 6, 0, 0, 248, 136, 184, 184, 184, 136, 248, 5,
+  7, 7, 6, 0, 1, 112, 8, 120, 136, 120, 0, 248, 5, 5, 5, 6,
+  0, 1, 40, 80, 160, 80, 40, 5, 3, 3, 6, 0, 1, 248, 8, 8,
+  2, 2, 2, 6, 2, 6, 64, 128, 5, 7, 7, 6, 0, 0, 248, 136,
+  168, 136, 152, 168, 248, 5, 1, 1, 6, 0, 6, 248, 4, 4, 4, 6,
+  0, 3, 96, 144, 144, 96, 5, 7, 7, 6, 0, 0, 32, 32, 248, 32,
+  32, 0, 248, 4, 5, 5, 6, 0, 3, 96, 144, 32, 64, 240, 3, 5,
+  5, 6, 0, 3, 224, 32, 224, 32, 224, 2, 2, 2, 6, 2, 6, 64,
+  128, 5, 8, 8, 6, 0, 255, 136, 136, 136, 136, 152, 232, 128, 128, 5,
+  7, 7, 6, 0, 0, 120, 152, 152, 120, 24, 24, 24, 2, 2, 2, 6,
+  2, 2, 192, 192, 2, 2, 2, 6, 2, 255, 64, 128, 3, 5, 5, 6,
+  0, 3, 64, 192, 64, 64, 224, 5, 7, 7, 6, 0, 1, 112, 136, 136,
+  136, 112, 0, 248, 5, 5, 5, 6, 0, 1, 160, 80, 40, 80, 160, 5,
+  7, 7, 6, 0, 0, 136, 144, 168, 88, 184, 8, 8, 5, 7, 7, 6,
+  0, 0, 136, 144, 184, 72, 152, 32, 56, 5, 8, 8, 6, 0, 0, 192,
+  64, 192, 72, 216, 56, 8, 8, 5, 7, 7, 6, 0, 0, 32, 0, 32,
+  64, 128, 136, 112, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 248,
+  136, 136, 5, 8, 8, 6, 0, 0, 16, 32, 0, 112, 136, 248, 136, 136,
+  5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 136, 248, 136, 136, 5, 8,
+  8, 6, 0, 0, 104, 144, 0, 112, 136, 248, 136, 136, 5, 8, 8, 6,
+  0, 0, 80, 0, 112, 136, 136, 248, 136, 136, 5, 8, 8, 6, 0, 0,
+  32, 80, 32, 112, 136, 248, 136, 136, 5, 7, 7, 6, 0, 0, 56, 96,
+  160, 184, 224, 160, 184, 5, 8, 8, 6, 0, 255, 112, 136, 128, 128, 136,
+  112, 32, 96, 5, 8, 8, 6, 0, 0, 64, 32, 0, 248, 128, 240, 128,
+  248, 5, 8, 8, 6, 0, 0, 8, 16, 0, 248, 128, 240, 128, 248, 5,
+  8, 8, 6, 0, 0, 32, 80, 0, 248, 128, 240, 128, 248, 5, 7, 7,
+  6, 0, 0, 80, 0, 248, 128, 240, 128, 248, 3, 8, 8, 6, 1, 0,
+  128, 64, 0, 224, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 32, 64,
+  0, 224, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 64, 160, 0, 224,
+  64, 64, 64, 224, 3, 7, 7, 6, 1, 0, 160, 0, 224, 64, 64, 64,
+  224, 5, 7, 7, 6, 0, 0, 112, 72, 72, 232, 72, 72, 112, 5, 8,
+  8, 6, 0, 0, 104, 144, 0, 136, 200, 168, 152, 136, 5, 8, 8, 6,
+  0, 0, 64, 32, 112, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0,
+  16, 32, 112, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80,
+  0, 112, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 112,
+  136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 80, 0, 112, 136, 136, 136,
+  136, 112, 5, 5, 5, 6, 0, 1, 136, 80, 32, 80, 136, 5, 8, 8,
+  6, 0, 255, 16, 112, 168, 168, 168, 168, 112, 64, 5, 8, 8, 6, 0,
+  0, 64, 32, 136, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 16,
+  32, 136, 136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0,
+  136, 136, 136, 136, 112, 5, 8, 8, 6, 0, 0, 80, 0, 136, 136, 136,
+  136, 136, 112, 5, 8, 8, 6, 0, 0, 16, 32, 136, 80, 32, 32, 32,
+  32, 5, 9, 9, 6, 0, 255, 192, 64, 112, 72, 72, 112, 64, 64, 224,
+  4, 8, 8, 6, 1, 255, 96, 144, 144, 160, 144, 144, 224, 128, 5, 8,
+  8, 6, 0, 0, 64, 32, 0, 112, 8, 120, 136, 120, 5, 8, 8, 6,
+  0, 0, 16, 32, 0, 112, 8, 120, 136, 120, 5, 8, 8, 6, 0, 0,
+  32, 80, 0, 112, 8, 120, 136, 120, 5, 8, 8, 6, 0, 0, 104, 144,
+  0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0, 0, 80, 0, 112, 8,
+  120, 136, 120, 5, 8, 8, 6, 0, 0, 32, 80, 32, 112, 8, 120, 136,
+  120, 5, 6, 6, 6, 0, 0, 208, 40, 120, 160, 168, 80, 5, 6, 6,
+  6, 0, 255, 112, 128, 136, 112, 32, 96, 5, 8, 8, 6, 0, 0, 64,
+  32, 0, 112, 136, 248, 128, 112, 5, 8, 8, 6, 0, 0, 16, 32, 0,
+  112, 136, 248, 128, 112, 5, 8, 8, 6, 0, 0, 32, 80, 0, 112, 136,
+  248, 128, 112, 5, 7, 7, 6, 0, 0, 80, 0, 112, 136, 248, 128, 112,
+  3, 8, 8, 6, 1, 0, 128, 64, 0, 64, 192, 64, 64, 224, 3, 8,
+  8, 6, 1, 0, 32, 64, 0, 64, 192, 64, 64, 224, 3, 8, 8, 6,
+  1, 0, 64, 160, 0, 64, 192, 64, 64, 224, 3, 7, 7, 6, 1, 0,
+  160, 0, 64, 192, 64, 64, 224, 5, 7, 7, 6, 0, 0, 160, 64, 160,
+  16, 120, 136, 112, 5, 8, 8, 6, 0, 0, 104, 144, 0, 176, 200, 136,
+  136, 136, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 136, 136, 112,
+  5, 8, 8, 6, 0, 0, 16, 32, 0, 112, 136, 136, 136, 112, 5, 8,
+  8, 6, 0, 0, 32, 80, 0, 112, 136, 136, 136, 112, 5, 8, 8, 6,
+  0, 0, 104, 144, 0, 112, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0,
+  80, 0, 112, 136, 136, 136, 112, 5, 5, 5, 6, 0, 1, 32, 0, 248,
+  0, 32, 5, 7, 7, 6, 0, 255, 16, 112, 168, 168, 168, 112, 64, 5,
+  8, 8, 6, 0, 0, 64, 32, 0, 136, 136, 136, 152, 104, 5, 8, 8,
+  6, 0, 0, 16, 32, 0, 136, 136, 136, 152, 104, 5, 8, 8, 6, 0,
+  0, 32, 80, 0, 136, 136, 136, 152, 104, 5, 7, 7, 6, 0, 0, 80,
+  0, 136, 136, 136, 152, 104, 5, 9, 9, 6, 0, 255, 16, 32, 0, 136,
+  136, 136, 248, 8, 112, 4, 7, 7, 6, 1, 255, 192, 64, 96, 80, 96,
+  64, 224, 5, 8, 8, 6, 0, 255, 80, 0, 136, 136, 136, 120, 8, 112
+};

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_ISO10646_1_PL.h

@@ -0,0 +1,184 @@
+/*
+  Fontname: ISO10646-1-PL
+  Copyright: A.Hardtung, public domain
+  Capital A Height: 7, '1' Height: 7
+  Calculated Max Values w= 5 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
+  Font Bounding box     w= 6 h= 9 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-2 dx= 0 dy= 0
+  Pure Font   ascent = 7 descent=-1
+  X Font      ascent = 7 descent=-1
+  Max Font    ascent = 8 descent=-2
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t ISO10646_1_PL_5x7[2732] U8G_FONT_SECTION(".progmem.ISO10646_1_PL_5x7") = {
+  0,6,9,0,254,7,1,146,3,33,32,255,255,8,254,7,
+  255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
+  128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
+  0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
+  120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
+  64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
+  2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
+  64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
+  32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
+  5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
+  64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
+  192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
+  0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64,
+  192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
+  128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
+  5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
+  6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
+  112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
+  32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
+  112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5,
+  5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
+  192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
+  32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
+  0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
+  8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168,
+  168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,
+  7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,
+  0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240,
+  136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240,
+  128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,
+  5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,
+  6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,
+  128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,
+  16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,
+  136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,
+  7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,
+  0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,
+  136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,
+  128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,
+  7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,
+  0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,
+  32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,
+  136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,
+  5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,
+  6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
+  136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,
+  32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,
+  224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,
+  1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,
+  80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,
+  64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,
+  0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,
+  128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,
+  120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,
+  0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,
+  136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,
+  136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,
+  8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,
+  6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,
+  192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,
+  168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,
+  6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,
+  136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,
+  5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,
+  0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64,
+  64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5,
+  5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,
+  136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,
+  6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,
+  0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,
+  64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,
+  3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,
+  6,0,2,104,144,0,0,0,6,0,0,5,9,9,6,0,
+  254,112,136,136,248,136,136,136,16,32,5,7,7,6,0,254,
+  112,8,120,136,120,16,32,5,8,8,6,0,0,16,32,112,
+  136,128,128,136,112,5,7,7,6,0,0,16,32,112,128,128,
+  136,112,5,9,9,6,0,254,248,128,128,240,128,128,248,8,
+  16,5,7,7,6,0,254,112,136,248,128,112,16,32,5,7,
+  7,6,0,0,128,144,160,192,128,128,248,5,7,7,6,0,
+  0,96,40,48,96,160,32,112,5,8,8,6,0,0,16,168,
+  136,200,168,152,136,136,5,8,8,6,0,0,8,16,0,176,
+  200,136,136,136,5,8,8,6,0,0,16,32,112,136,136,136,
+  136,112,5,8,8,6,0,0,16,32,0,112,136,136,136,112,
+  5,8,8,6,0,0,16,120,128,128,112,8,8,240,5,8,
+  8,6,0,0,16,32,0,112,128,112,8,240,5,8,8,6,
+  0,0,32,248,8,16,32,64,128,248,5,8,8,6,0,0,
+  16,32,0,248,16,32,64,248,5,7,7,6,0,0,248,8,
+  16,248,64,128,248,5,8,8,6,0,0,48,48,0,248,16,
+  32,64,248,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,1,7,7,
+  6,2,0,128,0,128,128,128,128,128,5,7,7,6,0,0,
+  32,112,168,160,168,112,32,5,7,7,6,0,0,48,64,64,
+  224,64,80,168,5,5,5,6,0,0,136,112,80,112,136,5,
+  7,7,6,0,0,136,80,32,248,32,248,32,1,7,7,6,
+  2,0,128,128,128,0,128,128,128,5,8,8,6,0,0,48,
+  72,32,80,80,32,144,96,3,1,1,6,1,7,160,5,7,
+  7,6,0,0,248,136,184,184,184,136,248,5,7,7,6,0,
+  1,112,8,120,136,120,0,248,5,5,5,6,0,1,40,80,
+  160,80,40,5,3,3,6,0,1,248,8,8,2,2,2,6,
+  2,6,64,128,5,7,7,6,0,0,248,136,168,136,152,168,
+  248,5,1,1,6,0,6,248,4,4,4,6,0,3,96,144,
+  144,96,5,7,7,6,0,0,32,32,248,32,32,0,248,4,
+  5,5,6,0,3,96,144,32,64,240,3,5,5,6,0,3,
+  224,32,224,32,224,2,2,2,6,2,6,64,128,5,8,8,
+  6,0,255,136,136,136,136,152,232,128,128,5,7,7,6,0,
+  0,120,152,152,120,24,24,24,2,2,2,6,2,2,192,192,
+  2,2,2,6,2,255,64,128,3,5,5,6,0,3,64,192,
+  64,64,224,5,7,7,6,0,1,112,136,136,136,112,0,248,
+  5,5,5,6,0,1,160,80,40,80,160,5,7,7,6,0,
+  0,136,144,168,88,184,8,8,5,7,7,6,0,0,136,144,
+  184,72,152,32,56,5,8,8,6,0,0,192,64,192,72,216,
+  56,8,8,5,7,7,6,0,0,32,0,32,64,128,136,112,
+  5,8,8,6,0,0,64,32,0,112,136,248,136,136,5,8,
+  8,6,0,0,16,32,0,112,136,248,136,136,5,8,8,6,
+  0,0,32,80,0,112,136,248,136,136,5,8,8,6,0,0,
+  104,144,0,112,136,248,136,136,5,8,8,6,0,0,80,0,
+  112,136,136,248,136,136,5,8,8,6,0,0,32,80,32,112,
+  136,248,136,136,5,7,7,6,0,0,56,96,160,184,224,160,
+  184,5,8,8,6,0,255,112,136,128,128,136,112,32,96,5,
+  8,8,6,0,0,64,32,0,248,128,240,128,248,5,8,8,
+  6,0,0,8,16,0,248,128,240,128,248,5,8,8,6,0,
+  0,32,80,0,248,128,240,128,248,5,7,7,6,0,0,80,
+  0,248,128,240,128,248,3,8,8,6,1,0,128,64,0,224,
+  64,64,64,224,3,8,8,6,1,0,32,64,0,224,64,64,
+  64,224,3,8,8,6,1,0,64,160,0,224,64,64,64,224,
+  3,7,7,6,1,0,160,0,224,64,64,64,224,5,7,7,
+  6,0,0,112,72,72,232,72,72,112,5,8,8,6,0,0,
+  104,144,0,136,200,168,152,136,5,8,8,6,0,0,64,32,
+  112,136,136,136,136,112,5,8,8,6,0,0,16,32,112,136,
+  136,136,136,112,5,8,8,6,0,0,32,80,0,112,136,136,
+  136,112,5,8,8,6,0,0,104,144,0,112,136,136,136,112,
+  5,8,8,6,0,0,80,0,112,136,136,136,136,112,5,5,
+  5,6,0,1,136,80,32,80,136,5,8,8,6,0,255,16,
+  112,168,168,168,168,112,64,5,8,8,6,0,0,64,32,136,
+  136,136,136,136,112,5,8,8,6,0,0,16,32,136,136,136,
+  136,136,112,5,8,8,6,0,0,32,80,0,136,136,136,136,
+  112,5,8,8,6,0,0,80,0,136,136,136,136,136,112,5,
+  8,8,6,0,0,16,32,136,80,32,32,32,32,5,9,9,
+  6,0,255,192,64,112,72,72,112,64,64,224,4,8,8,6,
+  1,255,96,144,144,160,144,144,224,128,5,8,8,6,0,0,
+  64,32,0,112,8,120,136,120,5,8,8,6,0,0,16,32,
+  0,112,8,120,136,120,5,8,8,6,0,0,32,80,0,112,
+  8,120,136,120,5,8,8,6,0,0,104,144,0,112,8,120,
+  136,120,5,7,7,6,0,0,80,0,112,8,120,136,120,5,
+  8,8,6,0,0,32,80,32,112,8,120,136,120,5,6,6,
+  6,0,0,208,40,120,160,168,80,5,6,6,6,0,255,112,
+  128,136,112,32,96,5,8,8,6,0,0,64,32,0,112,136,
+  248,128,112,5,8,8,6,0,0,16,32,0,112,136,248,128,
+  112,5,8,8,6,0,0,32,80,0,112,136,248,128,112,5,
+  7,7,6,0,0,80,0,112,136,248,128,112,3,8,8,6,
+  1,0,128,64,0,64,192,64,64,224,3,8,8,6,1,0,
+  32,64,0,64,192,64,64,224,3,8,8,6,1,0,64,160,
+  0,64,192,64,64,224,3,7,7,6,1,0,160,0,64,192,
+  64,64,224,5,7,7,6,0,0,160,64,160,16,120,136,112,
+  5,8,8,6,0,0,104,144,0,176,200,136,136,136,5,8,
+  8,6,0,0,64,32,0,112,136,136,136,112,5,8,8,6,
+  0,0,16,32,0,112,136,136,136,112,5,8,8,6,0,0,
+  32,80,0,112,136,136,136,112,5,8,8,6,0,0,104,144,
+  0,112,136,136,136,112,5,7,7,6,0,0,80,0,112,136,
+  136,136,112,5,5,5,6,0,1,32,0,248,0,32,5,7,
+  7,6,0,255,16,112,168,168,168,112,64,5,8,8,6,0,
+  0,64,32,0,136,136,136,152,104,5,8,8,6,0,0,16,
+  32,0,136,136,136,152,104,5,8,8,6,0,0,32,80,0,
+  136,136,136,152,104,5,7,7,6,0,0,80,0,136,136,136,
+  152,104,5,9,9,6,0,255,16,32,0,136,136,136,248,8,
+  112,4,7,7,6,1,255,192,64,96,80,96,64,224,5,8,
+  8,6,0,255,80,0,136,136,136,120,8,112};

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_ISO10646_1_tr.h

@@ -0,0 +1,197 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/*
+  Fontname: ISO10646-1-tr
+  Copyright: public domain
+  Capital A Height: 7, '1' Height: 7
+  Calculated Max Values w= 5 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
+  Font Bounding box     w= 6 h= 9 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
+  Pure Font   ascent = 7 descent=-1
+  X Font      ascent = 7 descent=-1
+  Max Font    ascent = 8 descent=-1
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t ISO10646_TR[2591] U8G_SECTION(".progmem.ISO10646_TR") = {
+  0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7,
+  255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
+  128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
+  0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
+  120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
+  64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
+  2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
+  64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
+  32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
+  5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
+  64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
+  192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
+  0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64,
+  192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
+  128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
+  5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
+  6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
+  112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
+  32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
+  112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5,
+  5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
+  192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
+  32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
+  0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
+  8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168,
+  168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,
+  7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,
+  0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240,
+  136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240,
+  128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,
+  5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,
+  6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,
+  128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,
+  16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,
+  136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,
+  7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,
+  0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,
+  136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,
+  128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,
+  7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,
+  0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,
+  32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,
+  136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,
+  5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,
+  6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
+  136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,
+  32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,
+  224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,
+  1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,
+  80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,
+  64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,
+  0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,
+  128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,
+  120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,
+  0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,
+  136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,
+  136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,
+  8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,
+  6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,
+  192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,
+  168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,
+  6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,
+  136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,
+  5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,
+  0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64,
+  64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5,
+  5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,
+  136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,
+  6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,
+  0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,
+  64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,
+  3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,
+  6,0,2,104,144,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,1,7,7,6,2,0,128,0,128,128,128,128,128,5,7,
+  7,6,0,0,32,112,168,160,168,112,32,5,7,7,6,0,
+  0,48,64,64,224,64,80,168,5,5,5,6,0,0,136,112,
+  80,112,136,5,7,7,6,0,0,136,80,32,248,32,248,32,
+  1,7,7,6,2,0,128,128,128,0,128,128,128,5,8,8,
+  6,0,0,48,72,32,80,80,32,144,96,3,1,1,6,1,
+  7,160,5,7,7,6,0,0,248,136,184,184,184,136,248,5,
+  7,7,6,0,1,112,8,120,136,120,0,248,5,5,5,6,
+  0,1,40,80,160,80,40,5,3,3,6,0,1,248,8,8,
+  2,2,2,6,2,6,64,128,5,7,7,6,0,0,248,136,
+  168,136,152,168,248,5,1,1,6,0,6,248,4,4,4,6,
+  0,3,96,144,144,96,5,7,7,6,0,0,32,32,248,32,
+  32,0,248,4,5,5,6,0,3,96,144,32,64,240,3,5,
+  5,6,0,3,224,32,224,32,224,2,2,2,6,2,6,64,
+  128,5,8,8,6,0,255,136,136,136,136,152,232,128,128,5,
+  7,7,6,0,0,120,152,152,120,24,24,24,2,2,2,6,
+  2,2,192,192,2,2,2,6,2,255,64,128,3,5,5,6,
+  0,3,64,192,64,64,224,5,7,7,6,0,1,112,136,136,
+  136,112,0,248,5,5,5,6,0,1,160,80,40,80,160,5,
+  7,7,6,0,0,136,144,168,88,184,8,8,5,7,7,6,
+  0,0,136,144,184,72,152,32,56,5,8,8,6,0,0,192,
+  64,192,72,216,56,8,8,5,7,7,6,0,0,32,0,32,
+  64,128,136,112,5,8,8,6,0,0,64,32,0,112,136,248,
+  136,136,5,8,8,6,0,0,16,32,0,112,136,248,136,136,
+  5,8,8,6,0,0,32,80,0,112,136,248,136,136,5,8,
+  8,6,0,0,104,144,0,112,136,248,136,136,5,8,8,6,
+  0,0,80,0,112,136,136,248,136,136,5,8,8,6,0,0,
+  32,80,32,112,136,248,136,136,5,7,7,6,0,0,56,96,
+  160,184,224,160,184,5,8,8,6,0,255,112,136,128,128,136,
+  112,32,96,5,8,8,6,0,0,64,32,0,248,128,240,128,
+  248,5,8,8,6,0,0,8,16,0,248,128,240,128,248,5,
+  8,8,6,0,0,32,80,0,248,128,240,128,248,5,7,7,
+  6,0,0,80,0,248,128,240,128,248,3,8,8,6,1,0,
+  128,64,0,224,64,64,64,224,3,8,8,6,1,0,32,64,
+  0,224,64,64,64,224,3,8,8,6,1,0,64,160,0,224,
+  64,64,64,224,3,7,7,6,1,0,160,0,224,64,64,64,
+  224,5,9,9,6,0,255,80,32,112,136,128,184,136,136,112,
+  5,8,8,6,0,0,104,144,0,136,200,168,152,136,5,8,
+  8,6,0,0,64,32,112,136,136,136,136,112,5,8,8,6,
+  0,0,16,32,112,136,136,136,136,112,5,8,8,6,0,0,
+  32,80,0,112,136,136,136,112,5,8,8,6,0,0,104,144,
+  0,112,136,136,136,112,5,8,8,6,0,0,80,0,112,136,
+  136,136,136,112,5,5,5,6,0,1,136,80,32,80,136,5,
+  8,8,6,0,255,16,112,168,168,168,168,112,64,5,8,8,
+  6,0,0,64,32,136,136,136,136,136,112,5,8,8,6,0,
+  0,16,32,136,136,136,136,136,112,5,8,8,6,0,0,32,
+  80,0,136,136,136,136,112,5,8,8,6,0,0,80,0,136,
+  136,136,136,136,112,1,7,7,6,2,0,128,0,128,128,128,
+  128,128,5,9,9,6,0,255,120,128,128,112,8,8,240,32,
+  96,4,8,8,6,1,255,96,144,144,160,144,144,224,128,5,
+  8,8,6,0,0,64,32,0,112,8,120,136,120,5,8,8,
+  6,0,0,16,32,0,112,8,120,136,120,5,8,8,6,0,
+  0,32,80,0,112,8,120,136,120,5,8,8,6,0,0,104,
+  144,0,112,8,120,136,120,5,7,7,6,0,0,80,0,112,
+  8,120,136,120,5,8,8,6,0,0,32,80,32,112,8,120,
+  136,120,5,6,6,6,0,0,208,40,120,160,168,80,5,7,
+  7,6,0,255,112,128,128,136,112,32,96,5,8,8,6,0,
+  0,64,32,0,112,136,248,128,112,5,8,8,6,0,0,16,
+  32,0,112,136,248,128,112,5,8,8,6,0,0,32,80,0,
+  112,136,248,128,112,5,7,7,6,0,0,80,0,112,136,248,
+  128,112,3,8,8,6,1,0,128,64,0,64,192,64,64,224,
+  3,8,8,6,1,0,32,64,0,64,192,64,64,224,3,8,
+  8,6,1,0,64,160,0,64,192,64,64,224,3,7,7,6,
+  1,0,160,0,64,192,64,64,224,5,8,8,6,0,255,80,
+  32,112,136,136,120,8,112,5,8,8,6,0,0,104,144,0,
+  176,200,136,136,136,5,8,8,6,0,0,64,32,0,112,136,
+  136,136,112,5,8,8,6,0,0,16,32,0,112,136,136,136,
+  112,5,8,8,6,0,0,32,80,0,112,136,136,136,112,5,
+  8,8,6,0,0,104,144,0,112,136,136,136,112,5,7,7,
+  6,0,0,80,0,112,136,136,136,112,5,5,5,6,0,1,
+  32,0,248,0,32,5,7,7,6,0,255,16,112,168,168,168,
+  112,64,5,8,8,6,0,0,64,32,0,136,136,136,152,104,
+  5,8,8,6,0,0,16,32,0,136,136,136,152,104,5,8,
+  8,6,0,0,32,80,0,136,136,136,152,104,5,7,7,6,
+  0,0,80,0,136,136,136,152,104,1,5,5,6,2,0,128,
+  128,128,128,128,5,7,7,6,0,255,112,128,112,8,240,32,
+  96,5,8,8,6,0,255,80,0,136,136,136,120,8,112};

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_ISO10646_5_Cyrillic.h

@@ -0,0 +1,196 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+  Fontname: ISO10646_5_Cyrillic
+  Copyright: A. Hardtung, public domain
+  Capital A Height: 7, '1' Height: 7
+  Calculated Max Values w= 5 h= 9 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 9
+  Font Bounding box     w= 6 h= 9 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
+  Pure Font   ascent = 7 descent=-1
+  X Font      ascent = 7 descent=-1
+  Max Font    ascent = 8 descent=-1
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t ISO10646_5_Cyrillic_5x7[2560] U8G_SECTION(".progmem.ISO10646_5_Cyrillic_5x7") = {
+  0, 6, 9, 0, 254, 7, 1, 145, 3, 32, 32, 255, 255, 8, 255, 7,
+  255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
+  128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
+  0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
+  120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
+  64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
+  2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
+  64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
+  32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
+  5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
+  64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
+  192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
+  0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
+  192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
+  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
+  5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
+  6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
+  48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
+  32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
+  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5,
+  5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
+  192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
+  32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
+  0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
+  8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168,
+  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7,
+  7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0,
+  0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144,
+  136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
+  128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5,
+  7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6,
+  0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128,
+  128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
+  16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136,
+  5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7,
+  6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0,
+  136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136,
+  136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128,
+  128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7,
+  7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0,
+  0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32,
+  32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136,
+  136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5,
+  7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6,
+  0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136,
+  136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32,
+  64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224,
+  5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, 1,
+  0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, 80,
+  136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, 64,
+  5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0,
+  0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, 128,
+  128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, 120,
+  5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, 0,
+  0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, 136,
+  136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, 136,
+  136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 8,
+  8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, 6,
+  0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, 192,
+  64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, 168,
+  168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, 6,
+  0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, 136,
+  240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, 5,
+  5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, 0,
+  112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, 64, 64,
+  72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, 5,
+  6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, 136,
+  168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, 6,
+  6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, 0,
+  248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, 64,
+  64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, 3,
+  7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2, 6,
+  0, 3, 104, 144, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
+  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
+  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
+  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
+  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
+  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
+  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
+  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
+  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
+  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
+  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
+  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
+  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 5, 8, 8, 6, 0, 0,
+  64, 248, 128, 128, 240, 128, 128, 248, 5, 8, 8, 6, 0, 0, 80, 248,
+  128, 128, 240, 128, 128, 248, 5, 7, 7, 6, 0, 0, 224, 64, 64, 112,
+  72, 72, 112, 5, 8, 8, 6, 0, 0, 16, 32, 248, 136, 128, 128, 128,
+  128, 5, 7, 7, 6, 0, 0, 48, 72, 128, 224, 128, 72, 48, 5, 7,
+  7, 6, 0, 0, 112, 136, 128, 112, 8, 136, 112, 3, 7, 7, 6, 1,
+  0, 224, 64, 64, 64, 64, 64, 224, 3, 8, 8, 6, 1, 0, 160, 0,
+  224, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
+  16, 144, 96, 5, 7, 7, 6, 0, 0, 160, 160, 160, 184, 168, 168, 184,
+  5, 7, 7, 6, 0, 0, 160, 160, 160, 248, 168, 168, 184, 4, 7, 7,
+  6, 0, 0, 224, 64, 112, 80, 80, 80, 80, 5, 8, 8, 6, 0, 0,
+  16, 32, 136, 144, 160, 224, 144, 136, 5, 8, 8, 6, 0, 0, 64, 32,
+  136, 152, 168, 200, 136, 136, 5, 9, 9, 6, 0, 255, 80, 32, 136, 136,
+  136, 80, 32, 32, 32, 5, 8, 8, 6, 0, 255, 136, 136, 136, 136, 136,
+  136, 248, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136,
+  5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 136, 136, 240, 5, 7, 7,
+  6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0, 0,
+  248, 136, 128, 128, 128, 128, 128, 5, 8, 8, 6, 0, 255, 120, 40, 40,
+  40, 72, 136, 248, 136, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
+  128, 248, 5, 7, 7, 6, 0, 0, 168, 168, 168, 112, 168, 168, 168, 5,
+  7, 7, 6, 0, 0, 240, 8, 8, 112, 8, 8, 240, 5, 7, 7, 6,
+  0, 0, 136, 136, 152, 168, 200, 136, 136, 5, 8, 8, 6, 0, 0, 80,
+  32, 136, 152, 168, 168, 200, 136, 5, 7, 7, 6, 0, 0, 136, 144, 160,
+  192, 160, 144, 136, 5, 7, 7, 6, 0, 0, 120, 40, 40, 40, 40, 168,
+  72, 5, 7, 7, 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7,
+  7, 6, 0, 0, 136, 136, 136, 248, 136, 136, 136, 5, 7, 7, 6, 0,
+  0, 112, 136, 136, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 136,
+  136, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128,
+  128, 128, 5, 7, 7, 6, 0, 0, 112, 136, 128, 128, 128, 136, 112, 5,
+  7, 7, 6, 0, 0, 248, 32, 32, 32, 32, 32, 32, 5, 7, 7, 6,
+  0, 0, 136, 136, 136, 80, 32, 64, 128, 5, 7, 7, 6, 0, 0, 32,
+  112, 168, 168, 168, 112, 32, 5, 7, 7, 6, 0, 0, 136, 136, 80, 32,
+  80, 136, 136, 5, 8, 8, 6, 0, 255, 136, 136, 136, 136, 136, 136, 248,
+  8, 5, 7, 7, 6, 0, 0, 136, 136, 136, 152, 104, 8, 8, 5, 7,
+  7, 6, 0, 0, 168, 168, 168, 168, 168, 168, 248, 5, 8, 8, 6, 0,
+  255, 168, 168, 168, 168, 168, 168, 248, 8, 5, 7, 7, 6, 0, 0, 192,
+  64, 64, 112, 72, 72, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 200,
+  168, 168, 200, 5, 7, 7, 6, 0, 0, 128, 128, 128, 240, 136, 136, 240,
+  5, 7, 7, 6, 0, 0, 112, 136, 8, 56, 8, 136, 112, 5, 7, 7,
+  6, 0, 0, 144, 168, 168, 232, 168, 168, 144, 5, 7, 7, 6, 0, 0,
+  120, 136, 136, 120, 40, 72, 136, 5, 5, 5, 6, 0, 0, 112, 8, 120,
+  136, 120, 5, 7, 7, 6, 0, 0, 24, 96, 128, 240, 136, 136, 112, 4,
+  5, 5, 6, 0, 0, 224, 144, 224, 144, 224, 5, 5, 5, 6, 0, 0,
+  248, 136, 128, 128, 128, 5, 6, 6, 6, 0, 255, 120, 40, 72, 136, 248,
+  136, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 5, 5, 6,
+  0, 0, 168, 168, 112, 168, 168, 5, 5, 5, 6, 0, 0, 240, 8, 48,
+  8, 240, 5, 5, 5, 6, 0, 0, 136, 152, 168, 200, 136, 5, 7, 7,
+  6, 0, 0, 80, 32, 136, 152, 168, 200, 136, 4, 5, 5, 6, 0, 0,
+  144, 160, 192, 160, 144, 5, 5, 5, 6, 0, 0, 248, 40, 40, 168, 72,
+  5, 5, 5, 6, 0, 0, 136, 216, 168, 136, 136, 5, 5, 5, 6, 0,
+  0, 136, 136, 248, 136, 136, 5, 5, 5, 6, 0, 0, 112, 136, 136, 136,
+  112, 5, 5, 5, 6, 0, 0, 248, 136, 136, 136, 136, 5, 6, 6, 6,
+  0, 255, 240, 136, 136, 240, 128, 128, 5, 5, 5, 6, 0, 0, 112, 128,
+  128, 136, 112, 5, 5, 5, 6, 0, 0, 248, 32, 32, 32, 32, 5, 6,
+  6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 6, 6, 6, 0, 0,
+  32, 112, 168, 168, 112, 32, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80,
+  136, 5, 6, 6, 6, 0, 255, 136, 136, 136, 136, 248, 8, 5, 5, 5,
+  6, 0, 0, 136, 136, 248, 8, 8, 5, 5, 5, 6, 0, 0, 168, 168,
+  168, 168, 248, 5, 6, 6, 6, 0, 255, 168, 168, 168, 168, 248, 8, 5,
+  5, 5, 6, 0, 0, 192, 64, 112, 72, 112, 5, 5, 5, 6, 0, 0,
+  136, 136, 200, 168, 200, 3, 5, 5, 6, 1, 0, 128, 128, 192, 160, 192,
+  5, 5, 5, 6, 0, 0, 112, 136, 56, 136, 112, 5, 5, 5, 6, 0,
+  0, 144, 168, 232, 168, 144, 5, 5, 5, 6, 0, 0, 120, 136, 120, 40,
+  72, 5, 8, 8, 6, 0, 0, 64, 32, 0, 112, 136, 248, 128, 112, 5,
+  7, 7, 6, 0, 0, 80, 0, 112, 136, 248, 128, 112, 5, 9, 9, 6,
+  0, 255, 64, 224, 64, 64, 120, 72, 72, 72, 16, 5, 8, 8, 6, 0,
+  0, 16, 32, 0, 248, 136, 128, 128, 128, 5, 5, 5, 6, 0, 0, 112,
+  136, 96, 136, 112, 5, 5, 5, 6, 0, 0, 112, 128, 112, 8, 240, 1,
+  7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 7, 7, 6,
+  1, 0, 160, 0, 64, 64, 64, 64, 64, 3, 8, 8, 6, 1, 255, 32,
+  0, 32, 32, 32, 32, 160, 64, 5, 5, 5, 6, 0, 0, 160, 160, 184,
+  168, 184, 5, 5, 5, 6, 0, 0, 160, 160, 248, 168, 184, 5, 6, 6,
+  6, 0, 0, 64, 224, 64, 120, 72, 72, 4, 8, 8, 6, 0, 0, 16,
+  32, 0, 144, 160, 192, 160, 144, 5, 8, 8, 6, 0, 0, 64, 32, 0,
+  136, 152, 168, 200, 136, 5, 9, 9, 6, 0, 255, 80, 32, 0, 136, 136,
+  136, 120, 8, 112, 5, 6, 6, 6, 0, 255, 136, 136, 136, 136, 248, 32
+};

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_ISO10646_CN.h

@@ -0,0 +1,293 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+  Fontname: ISO10646_CN
+  Copyright: A. Hardtung, public domain
+  Capital A Height: 7, '1' Height: 7
+  Calculated Max Values w=11 h=11 x= 2 y=10 dx=12 dy= 0 ascent=10 len=22
+  Font Bounding box     w=12 h=11 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
+  Pure Font   ascent = 7 descent=-1
+  X Font      ascent = 7 descent=-1
+  Max Font    ascent =10 descent=-1
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t ISO10646_CN[4105] U8G_SECTION(".progmem.ISO10646_CN") = {
+  0, 12, 11, 0, 254, 7, 1, 146, 3, 33, 32, 255, 255, 10, 255, 7,
+  255, 0, 0, 0, 6, 0, 10, 1, 7, 7, 6, 2, 0, 128, 128, 128,
+  128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
+  0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
+  120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
+  64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
+  2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
+  64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
+  32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
+  5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
+  64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
+  192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
+  0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
+  192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
+  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
+  5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
+  6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
+  112, 128, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
+  32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
+  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 8, 112, 2, 5,
+  5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
+  192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
+  32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 0,
+  0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
+  8, 16, 32, 0, 32, 5, 7, 7, 6, 0, 0, 112, 136, 8, 104, 168,
+  168, 112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5,
+  7, 7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6,
+  0, 0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 240,
+  136, 136, 136, 136, 136, 240, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240,
+  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128,
+  5, 7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7,
+  6, 0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0,
+  128, 128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16,
+  16, 16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144,
+  136, 5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7,
+  7, 6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0,
+  0, 136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136,
+  136, 136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128,
+  128, 128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5,
+  7, 7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6,
+  0, 0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248,
+  32, 32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136,
+  136, 136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32,
+  5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7,
+  6, 0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0,
+  136, 136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16,
+  32, 64, 128, 248, 3, 7, 7, 6, 0, 0, 224, 128, 128, 128, 128, 128,
+  224, 5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6,
+  0, 0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32,
+  80, 136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128,
+  64, 5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6,
+  0, 0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112,
+  128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136,
+  120, 5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6,
+  0, 0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112,
+  136, 136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136,
+  136, 136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3,
+  8, 8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7,
+  6, 1, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0,
+  192, 64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168,
+  168, 168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5,
+  6, 0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136,
+  136, 240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8,
+  5, 5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0,
+  0, 112, 128, 112, 8, 240, 4, 7, 7, 6, 0, 0, 64, 64, 224, 64,
+  64, 64, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5,
+  5, 6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136,
+  136, 168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5,
+  6, 6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0,
+  0, 248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128,
+  64, 64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128,
+  3, 7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2,
+  6, 0, 3, 104, 144, 0, 0, 0, 6, 0, 10, 0, 0, 0, 12, 0,
+  10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0,
+  12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0,
+  0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0,
+  10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0,
+  12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0,
+  0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0,
+  10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0,
+  12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0,
+  0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0,
+  10, 0, 0, 0, 12, 0, 10, 0, 0, 0, 12, 0, 10, 0, 0, 0,
+  12, 0, 10, 0, 0, 0, 12, 0, 10, 11, 11, 22, 12, 0, 255, 255,
+  224, 2, 0, 2, 0, 4, 0, 13, 0, 20, 128, 36, 64, 196, 32, 4,
+  0, 4, 0, 4, 0, 11, 11, 22, 12, 0, 255, 249, 0, 138, 0, 171,
+  224, 172, 64, 170, 64, 170, 64, 170, 64, 170, 128, 33, 0, 82, 128, 140,
+  96, 11, 11, 22, 12, 0, 255, 36, 0, 36, 0, 63, 128, 68, 0, 132,
+  0, 4, 0, 255, 224, 10, 0, 17, 0, 32, 128, 192, 96, 11, 11, 22,
+  12, 0, 255, 36, 0, 36, 0, 63, 192, 68, 0, 4, 0, 255, 224, 9,
+  0, 9, 0, 17, 32, 33, 32, 64, 224, 11, 11, 22, 12, 0, 255, 32,
+  0, 61, 224, 81, 32, 145, 32, 17, 32, 255, 32, 17, 32, 41, 32, 37,
+  224, 69, 32, 128, 0, 11, 11, 22, 12, 0, 255, 32, 128, 127, 192, 8,
+  64, 255, 224, 17, 0, 32, 128, 95, 64, 128, 32, 63, 128, 0, 0, 127,
+  192, 11, 11, 22, 12, 0, 255, 34, 64, 71, 224, 148, 128, 228, 128, 47,
+  224, 68, 128, 244, 128, 7, 224, 52, 128, 196, 128, 7, 224, 11, 11, 22,
+  12, 0, 255, 4, 128, 143, 224, 73, 0, 25, 0, 47, 192, 9, 0, 9,
+  0, 47, 192, 73, 0, 137, 0, 15, 224, 11, 11, 22, 12, 0, 255, 16,
+  0, 63, 128, 81, 0, 14, 0, 49, 128, 192, 96, 63, 128, 36, 128, 63,
+  128, 36, 128, 63, 128, 11, 11, 22, 12, 0, 255, 34, 128, 250, 64, 7,
+  224, 250, 128, 138, 128, 138, 128, 250, 128, 34, 128, 178, 128, 170, 160, 100,
+  224, 11, 11, 22, 12, 0, 255, 34, 32, 71, 64, 146, 128, 239, 224, 34,
+  0, 71, 192, 236, 64, 7, 192, 52, 64, 199, 192, 4, 64, 11, 11, 22,
+  12, 0, 255, 8, 0, 15, 192, 8, 0, 8, 0, 255, 224, 8, 0, 14,
+  0, 9, 128, 8, 64, 8, 0, 8, 0, 10, 11, 22, 12, 0, 255, 255,
+  128, 0, 128, 0, 128, 128, 128, 128, 128, 255, 128, 128, 0, 128, 0, 128,
+  64, 128, 64, 127, 192, 11, 11, 22, 12, 0, 255, 71, 192, 65, 0, 239,
+  224, 65, 0, 69, 0, 105, 96, 201, 32, 77, 96, 73, 32, 79, 224, 200,
+  32, 11, 11, 22, 12, 0, 255, 8, 0, 4, 0, 4, 0, 10, 0, 10,
+  0, 10, 0, 17, 0, 17, 0, 32, 128, 64, 64, 128, 32, 11, 11, 22,
+  12, 0, 255, 34, 64, 34, 0, 247, 224, 34, 0, 35, 224, 53, 32, 229,
+  32, 37, 64, 40, 128, 41, 64, 114, 32, 11, 10, 20, 12, 0, 0, 68,
+  64, 68, 64, 68, 64, 127, 192, 4, 0, 4, 0, 132, 32, 132, 32, 132,
+  32, 255, 224, 11, 11, 22, 12, 0, 255, 4, 0, 0, 0, 127, 192, 4,
+  0, 4, 0, 4, 0, 127, 192, 4, 0, 4, 0, 4, 0, 255, 224, 11,
+  11, 22, 12, 0, 255, 255, 224, 17, 0, 1, 192, 254, 0, 72, 128, 37,
+  0, 4, 0, 255, 224, 21, 0, 36, 128, 196, 96, 11, 11, 22, 12, 0,
+  255, 17, 0, 127, 192, 68, 64, 127, 192, 68, 64, 127, 192, 4, 0, 255,
+  224, 4, 0, 4, 0, 4, 0, 9, 11, 22, 12, 0, 255, 16, 0, 255,
+  128, 128, 128, 128, 128, 255, 128, 128, 128, 128, 128, 255, 128, 128, 128, 128,
+  128, 255, 128, 11, 11, 22, 12, 0, 255, 113, 0, 1, 0, 3, 224, 249,
+  32, 33, 32, 65, 32, 81, 32, 137, 32, 250, 32, 2, 32, 4, 192, 11,
+  11, 22, 12, 0, 255, 127, 192, 17, 0, 17, 0, 17, 0, 17, 0, 255,
+  224, 17, 0, 17, 0, 33, 0, 33, 0, 65, 0, 11, 11, 22, 12, 0,
+  255, 33, 0, 34, 0, 244, 64, 87, 224, 80, 32, 87, 192, 148, 64, 84,
+  64, 36, 64, 87, 192, 148, 64, 11, 11, 22, 12, 0, 255, 17, 0, 10,
+  0, 127, 192, 4, 0, 4, 0, 255, 224, 4, 0, 10, 0, 17, 0, 32,
+  128, 192, 96, 10, 11, 22, 12, 0, 255, 95, 192, 0, 64, 132, 64, 132,
+  64, 191, 64, 132, 64, 140, 64, 148, 64, 164, 64, 140, 64, 129, 192, 11,
+  11, 22, 12, 0, 255, 36, 0, 39, 192, 36, 0, 36, 0, 255, 224, 0,
+  0, 20, 64, 36, 128, 71, 0, 12, 0, 112, 0, 11, 11, 22, 12, 0,
+  255, 36, 128, 4, 128, 15, 192, 228, 128, 36, 128, 63, 224, 36, 128, 36,
+  128, 40, 128, 80, 0, 143, 224, 11, 11, 22, 12, 0, 255, 8, 0, 8,
+  0, 255, 128, 136, 128, 136, 128, 255, 128, 136, 128, 136, 128, 255, 160, 136,
+  32, 7, 224, 11, 11, 22, 12, 0, 255, 39, 128, 36, 128, 244, 128, 36,
+  128, 116, 128, 108, 128, 164, 128, 36, 128, 36, 160, 40, 160, 48, 96, 10,
+  11, 22, 12, 0, 255, 255, 192, 128, 64, 128, 64, 158, 64, 146, 64, 146,
+  64, 158, 64, 128, 64, 128, 64, 255, 192, 128, 64, 11, 11, 22, 12, 0,
+  255, 127, 192, 68, 0, 95, 192, 80, 64, 95, 192, 80, 64, 95, 192, 66,
+  0, 74, 128, 82, 64, 166, 32, 11, 11, 22, 12, 0, 255, 4, 0, 7,
+  224, 4, 0, 127, 192, 64, 64, 64, 64, 64, 64, 127, 192, 0, 0, 82,
+  64, 137, 32, 11, 11, 22, 12, 0, 255, 71, 128, 36, 128, 4, 128, 4,
+  128, 232, 96, 32, 0, 47, 192, 36, 64, 34, 128, 49, 0, 38, 192, 11,
+  11, 22, 12, 0, 255, 127, 192, 74, 64, 127, 192, 4, 0, 255, 224, 4,
+  0, 63, 128, 32, 128, 36, 128, 36, 128, 255, 224, 11, 11, 22, 12, 0,
+  255, 34, 0, 79, 224, 72, 32, 79, 224, 200, 0, 79, 224, 74, 160, 90,
+  160, 111, 224, 74, 160, 72, 96, 11, 11, 22, 12, 0, 255, 243, 192, 36,
+  64, 42, 128, 241, 0, 34, 128, 101, 224, 114, 32, 165, 64, 32, 128, 35,
+  0, 44, 0, 11, 11, 22, 12, 0, 255, 4, 0, 255, 224, 128, 32, 0,
+  0, 255, 224, 4, 0, 36, 0, 39, 192, 36, 0, 84, 0, 143, 224, 11,
+  11, 22, 12, 0, 255, 115, 224, 16, 128, 81, 0, 35, 224, 250, 32, 42,
+  160, 34, 160, 34, 160, 32, 128, 33, 64, 98, 32, 11, 11, 22, 12, 0,
+  255, 34, 0, 247, 128, 34, 128, 54, 128, 226, 160, 37, 160, 36, 96, 104,
+  32, 0, 0, 82, 64, 137, 32, 11, 11, 22, 12, 0, 255, 115, 192, 66,
+  0, 66, 0, 123, 224, 74, 64, 74, 64, 122, 64, 74, 64, 66, 64, 68,
+  64, 136, 64, 11, 11, 22, 12, 0, 255, 8, 0, 255, 224, 8, 0, 31,
+  192, 48, 64, 95, 192, 144, 64, 31, 192, 16, 64, 16, 64, 16, 192, 11,
+  11, 22, 12, 0, 255, 2, 0, 127, 224, 66, 0, 66, 0, 95, 192, 66,
+  0, 71, 0, 74, 128, 82, 64, 98, 32, 130, 0, 11, 11, 22, 12, 0,
+  255, 243, 192, 150, 64, 145, 128, 166, 96, 161, 0, 151, 192, 145, 0, 149,
+  0, 231, 224, 129, 0, 129, 0, 11, 11, 22, 12, 0, 255, 15, 128, 136,
+  128, 79, 128, 8, 128, 143, 128, 64, 0, 31, 192, 53, 64, 85, 64, 149,
+  64, 63, 224, 11, 11, 22, 12, 0, 255, 39, 224, 32, 128, 248, 128, 32,
+  128, 32, 128, 56, 128, 224, 128, 32, 128, 32, 128, 32, 128, 97, 128, 11,
+  11, 22, 12, 0, 255, 31, 224, 145, 0, 87, 192, 20, 64, 23, 192, 148,
+  64, 87, 192, 17, 0, 85, 64, 153, 32, 35, 0, 11, 11, 22, 12, 0,
+  255, 32, 128, 39, 224, 242, 64, 33, 128, 34, 64, 52, 32, 226, 64, 34,
+  64, 34, 64, 34, 64, 100, 64, 11, 11, 22, 12, 0, 255, 65, 0, 65,
+  0, 79, 224, 233, 32, 73, 32, 73, 32, 111, 224, 201, 32, 73, 32, 73,
+  32, 207, 224, 11, 11, 22, 12, 0, 255, 33, 0, 241, 0, 79, 224, 169,
+  32, 249, 32, 47, 224, 57, 32, 233, 32, 41, 32, 47, 224, 40, 32, 11,
+  11, 22, 12, 0, 255, 143, 224, 73, 32, 9, 32, 203, 160, 73, 32, 79,
+  224, 72, 32, 75, 160, 74, 160, 107, 160, 80, 224, 11, 11, 22, 12, 0,
+  255, 127, 192, 4, 0, 68, 64, 36, 64, 36, 128, 4, 0, 255, 224, 4,
+  0, 4, 0, 4, 0, 4, 0, 11, 11, 22, 12, 0, 255, 130, 0, 66,
+  0, 31, 224, 194, 0, 95, 192, 82, 64, 95, 192, 71, 0, 74, 128, 82,
+  64, 191, 224, 11, 11, 22, 12, 0, 255, 4, 0, 127, 224, 72, 128, 127,
+  224, 72, 128, 79, 128, 64, 0, 95, 192, 72, 64, 71, 128, 152, 96, 11,
+  11, 22, 12, 0, 255, 1, 0, 239, 224, 161, 0, 164, 64, 175, 224, 164,
+  64, 175, 224, 169, 32, 233, 32, 2, 128, 12, 96, 11, 11, 22, 12, 0,
+  255, 20, 192, 246, 160, 188, 96, 167, 128, 168, 128, 191, 224, 169, 32, 239,
+  224, 9, 32, 15, 224, 9, 32, 11, 11, 22, 12, 0, 255, 127, 128, 64,
+  128, 66, 128, 98, 128, 84, 128, 72, 128, 72, 128, 84, 160, 98, 160, 64,
+  96, 128, 32, 11, 11, 22, 12, 0, 255, 4, 0, 127, 224, 64, 32, 127,
+  224, 64, 0, 125, 224, 84, 32, 76, 160, 84, 96, 100, 160, 141, 96, 11,
+  11, 22, 12, 0, 255, 130, 0, 95, 224, 4, 0, 8, 64, 159, 224, 64,
+  32, 10, 128, 10, 128, 74, 160, 146, 160, 34, 96, 11, 11, 22, 12, 0,
+  255, 65, 0, 79, 224, 232, 32, 66, 128, 68, 64, 104, 32, 199, 192, 65,
+  0, 65, 0, 65, 0, 207, 224, 11, 11, 22, 12, 0, 255, 80, 32, 125,
+  32, 145, 32, 255, 32, 17, 32, 125, 32, 85, 32, 85, 32, 84, 32, 92,
+  32, 16, 224, 11, 11, 22, 12, 0, 255, 63, 128, 32, 128, 63, 128, 32,
+  128, 255, 224, 72, 0, 123, 192, 73, 64, 121, 64, 72, 128, 251, 96, 11,
+  11, 22, 12, 0, 255, 4, 0, 4, 0, 4, 0, 36, 128, 36, 64, 68,
+  64, 68, 32, 132, 32, 4, 0, 4, 0, 28, 0, 11, 11, 22, 12, 0,
+  255, 4, 0, 4, 0, 4, 0, 255, 224, 4, 0, 10, 0, 10, 0, 17,
+  0, 17, 0, 32, 128, 192, 96, 9, 10, 20, 10, 0, 0, 136, 128, 73,
+  0, 8, 0, 255, 128, 0, 128, 0, 128, 127, 128, 0, 128, 0, 128, 255,
+  128, 11, 11, 22, 12, 0, 255, 33, 0, 18, 0, 255, 224, 0, 0, 120,
+  128, 74, 128, 122, 128, 74, 128, 122, 128, 72, 128, 89, 128, 11, 11, 22,
+  12, 0, 255, 39, 192, 0, 0, 0, 0, 239, 224, 33, 0, 34, 0, 36,
+  64, 47, 224, 32, 32, 80, 0, 143, 224, 11, 11, 22, 12, 0, 255, 32,
+  128, 39, 0, 249, 0, 33, 192, 119, 0, 33, 0, 249, 224, 39, 0, 113,
+  32, 169, 32, 32, 224, 11, 11, 22, 12, 0, 255, 16, 64, 16, 64, 253,
+  224, 16, 64, 56, 192, 53, 64, 82, 64, 148, 64, 16, 64, 16, 64, 16,
+  192, 11, 11, 22, 12, 0, 255, 0, 64, 248, 64, 11, 224, 8, 64, 136,
+  64, 82, 64, 81, 64, 33, 64, 80, 64, 72, 64, 137, 192, 10, 11, 22,
+  12, 0, 255, 132, 0, 132, 64, 132, 128, 245, 0, 134, 0, 132, 0, 132,
+  0, 148, 0, 164, 64, 196, 64, 131, 192, 11, 11, 22, 12, 0, 255, 17,
+  32, 125, 0, 17, 0, 255, 224, 41, 0, 253, 64, 73, 64, 124, 128, 8,
+  160, 253, 96, 10, 32, 11, 11, 22, 12, 0, 255, 23, 192, 36, 64, 36,
+  64, 103, 192, 161, 0, 47, 224, 33, 0, 35, 128, 37, 64, 41, 32, 33,
+  0, 11, 11, 22, 12, 0, 255, 8, 0, 255, 224, 16, 0, 39, 192, 32,
+  128, 97, 0, 175, 224, 33, 0, 33, 0, 33, 0, 35, 0, 11, 11, 22,
+  12, 0, 255, 36, 0, 47, 224, 180, 0, 164, 128, 164, 160, 170, 192, 42,
+  128, 40, 128, 41, 64, 50, 64, 36, 32, 11, 11, 22, 12, 0, 255, 127,
+  224, 128, 0, 63, 192, 32, 64, 63, 192, 16, 0, 31, 192, 16, 64, 40,
+  128, 71, 0, 56, 224, 11, 11, 22, 12, 0, 255, 127, 224, 64, 0, 64,
+  0, 64, 0, 64, 0, 64, 0, 64, 0, 64, 0, 64, 0, 64, 0, 128,
+  0, 11, 11, 22, 12, 0, 255, 255, 224, 4, 0, 127, 192, 68, 64, 127,
+  192, 68, 64, 127, 192, 68, 0, 36, 0, 24, 0, 231, 224, 11, 11, 22,
+  12, 0, 255, 17, 224, 253, 0, 69, 0, 41, 224, 253, 64, 17, 64, 125,
+  64, 17, 64, 85, 64, 146, 64, 52, 64, 11, 11, 22, 12, 0, 255, 33,
+  0, 95, 224, 64, 0, 207, 192, 64, 0, 79, 192, 64, 0, 79, 192, 72,
+  64, 79, 192, 72, 64, 11, 11, 22, 12, 0, 255, 4, 0, 127, 192, 64,
+  64, 127, 192, 64, 64, 127, 192, 64, 64, 127, 192, 4, 64, 82, 32, 191,
+  160, 11, 11, 22, 12, 0, 255, 127, 192, 68, 64, 127, 192, 68, 64, 127,
+  192, 4, 0, 27, 0, 224, 224, 17, 0, 17, 0, 97, 0, 11, 11, 22,
+  12, 0, 255, 255, 224, 4, 0, 8, 0, 127, 224, 73, 32, 79, 32, 73,
+  32, 79, 32, 73, 32, 73, 32, 127, 224, 11, 11, 22, 12, 0, 255, 253,
+  224, 86, 64, 121, 64, 56, 128, 85, 64, 146, 32, 255, 224, 4, 0, 39,
+  192, 36, 0, 255, 224, 11, 11, 22, 12, 0, 255, 251, 128, 82, 0, 123,
+  224, 18, 64, 250, 64, 20, 64, 63, 128, 32, 128, 63, 128, 32, 128, 63,
+  128, 11, 11, 22, 12, 0, 255, 31, 224, 32, 0, 39, 192, 100, 64, 167,
+  192, 32, 0, 47, 224, 40, 32, 39, 192, 33, 0, 35, 0, 11, 11, 22,
+  12, 0, 255, 243, 224, 130, 32, 130, 32, 250, 32, 130, 32, 130, 32, 138,
+  32, 178, 32, 194, 224, 2, 0, 2, 0, 11, 11, 22, 12, 0, 255, 36,
+  128, 70, 160, 149, 192, 228, 128, 39, 224, 68, 128, 245, 192, 6, 160, 52,
+  128, 196, 128, 7, 224, 11, 11, 22, 12, 0, 255, 39, 192, 65, 0, 135,
+  224, 224, 32, 34, 128, 69, 128, 242, 128, 15, 224, 48, 128, 193, 64, 2,
+  32, 11, 11, 22, 12, 0, 255, 2, 0, 2, 0, 34, 0, 35, 192, 34,
+  0, 34, 0, 34, 0, 34, 0, 34, 0, 34, 0, 255, 224, 9, 11, 22,
+  12, 0, 255, 8, 0, 8, 0, 255, 128, 136, 128, 136, 128, 136, 128, 255,
+  128, 136, 128, 136, 128, 136, 128, 255, 128, 11, 11, 22, 12, 0, 255, 33,
+  0, 83, 160, 65, 0, 247, 224, 81, 0, 83, 192, 86, 64, 83, 192, 90,
+  64, 83, 192, 66, 64, 11, 11, 22, 12, 0, 255, 127, 192, 4, 0, 4,
+  0, 4, 0, 255, 224, 10, 0, 10, 0, 18, 0, 34, 32, 66, 32, 129,
+  224, 11, 11, 22, 12, 0, 255, 17, 0, 33, 0, 47, 224, 97, 0, 163,
+  128, 35, 128, 37, 64, 37, 64, 41, 32, 33, 0, 33, 0, 11, 11, 22,
+  12, 0, 255, 247, 224, 148, 32, 244, 32, 151, 224, 148, 128, 244, 128, 151,
+  224, 148, 128, 244, 160, 150, 96, 4, 32, 11, 11, 22, 12, 0, 255, 123,
+  224, 148, 128, 4, 0, 127, 192, 4, 0, 255, 224, 1, 0, 255, 224, 33,
+  0, 17, 0, 7, 0, 11, 11, 22, 12, 0, 255, 33, 0, 71, 192, 145,
+  0, 47, 224, 96, 128, 175, 224, 32, 128, 36, 128, 34, 128, 32, 128, 35,
+  128, 11, 11, 22, 12, 0, 255, 39, 192, 36, 64, 247, 192, 46, 224, 42,
+  160, 62, 224, 225, 0, 47, 224, 35, 128, 37, 64, 105, 32, 11, 11, 22,
+  12, 0, 255, 20, 0, 39, 224, 42, 0, 98, 0, 163, 192, 34, 0, 34,
+  0, 35, 224, 34, 0, 34, 0, 34, 0
+};

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_ISO10646_CZ.h

@@ -0,0 +1,192 @@
+/*
+  Fontname: ISO10646_CZ
+  Copyright: A. Hardtung, public domain
+  Modified for Czech accents by Petr Zahradnik, http://www.zahradniksebavi.cz
+  Capital A Height: 7, '1' Height: 7
+  Calculated Max Values w= 6 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
+  Font Bounding box     w= 6 h= 9 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
+  Pure Font   ascent = 7 descent=-1
+  X Font      ascent = 7 descent=-1
+  Max Font    ascent = 8 descent=-1
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t ISO10646_CZ[2832] U8G_SECTION(".progmem.ISO10646_CZ") = {
+  0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7,
+  255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
+  128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
+  0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
+  120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
+  64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
+  2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
+  64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
+  32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
+  5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
+  64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
+  192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
+  0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64,
+  192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
+  128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
+  5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
+  6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
+  112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
+  32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
+  112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5,
+  5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
+  192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
+  32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
+  0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
+  8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168,
+  168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,
+  7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,
+  0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240,
+  136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240,
+  128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,
+  5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,
+  6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,
+  128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,
+  16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,
+  136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,
+  7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,
+  0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,
+  136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,
+  128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,
+  7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,
+  0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,
+  32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,
+  136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,
+  5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,
+  6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
+  136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,
+  32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,
+  224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,
+  1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,
+  80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,
+  64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,
+  0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,
+  128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,
+  120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,
+  0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,
+  136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,
+  136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,
+  8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,
+  6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,
+  192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,
+  168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,
+  6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,
+  136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,
+  5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,
+  0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64,
+  64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5,
+  5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,
+  136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,
+  6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,
+  0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,
+  64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,
+  3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,
+  6,0,2,104,144,0,0,0,6,0,0,5,8,8,6,0,
+  0,16,32,112,136,136,248,136,136,5,8,8,6,0,0,8,
+  16,248,128,128,240,128,248,3,8,8,6,1,0,32,64,224,
+  64,64,64,64,224,5,8,8,6,0,0,16,32,112,136,136,
+  136,136,112,5,8,8,6,0,0,16,32,136,136,136,136,136,
+  112,5,8,8,6,0,0,16,32,136,136,80,32,32,32,5,
+  8,8,6,0,0,16,32,0,112,8,120,136,120,5,8,8,
+  6,0,0,16,32,0,112,136,248,128,112,2,8,8,6,2,
+  0,64,128,0,128,128,128,128,128,5,8,8,6,0,0,16,
+  32,0,112,136,136,136,112,5,8,8,6,0,0,16,32,0,
+  136,136,136,152,104,5,9,9,6,0,255,16,32,0,136,136,
+  136,120,8,112,5,8,8,6,0,0,80,32,112,136,128,128,
+  136,112,5,8,8,6,0,0,80,32,0,112,128,128,136,112,
+  5,8,8,6,0,0,80,32,240,136,136,136,136,240,6,8,
+  8,6,0,0,4,20,24,112,144,144,144,112,5,8,8,6,
+  0,0,80,32,248,128,128,240,128,248,5,8,8,6,0,0,
+  80,32,0,112,136,248,128,112,5,8,8,6,0,0,80,32,
+  136,200,168,152,136,136,5,8,8,6,0,0,80,32,0,176,
+  200,136,136,136,5,8,8,6,0,0,80,32,240,136,240,160,
+  144,136,5,8,8,6,0,0,80,32,0,176,200,128,128,128,
+  5,8,8,6,0,0,80,32,120,128,128,112,8,240,5,8,
+  8,6,0,0,80,32,0,112,128,112,8,240,5,8,8,6,
+  0,0,80,32,248,32,32,32,32,32,6,8,8,6,0,0,
+  4,68,72,224,64,64,64,48,5,8,8,6,0,0,32,80,
+  168,136,136,136,136,112,5,8,8,6,0,0,32,80,32,136,
+  136,136,152,104,5,8,8,6,0,0,80,32,248,8,48,64,
+  128,248,5,8,8,6,0,0,80,32,0,248,16,32,64,248,
+  0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,
+  0,0,1,7,7,6,2,0,128,0,128,128,128,128,128,5,
+  7,7,6,0,0,32,112,168,160,168,112,32,5,7,7,6,
+  0,0,48,64,64,224,64,80,168,5,5,5,6,0,0,136,
+  112,80,112,136,5,7,7,6,0,0,136,80,32,248,32,248,
+  32,1,7,7,6,2,0,128,128,128,0,128,128,128,5,8,
+  8,6,0,0,48,72,32,80,80,32,144,96,3,1,1,6,
+  1,7,160,5,7,7,6,0,0,248,136,184,184,184,136,248,
+  5,7,7,6,0,1,112,8,120,136,120,0,248,5,5,5,
+  6,0,1,40,80,160,80,40,5,3,3,6,0,1,248,8,
+  8,2,2,2,6,2,6,64,128,5,7,7,6,0,0,248,
+  136,168,136,152,168,248,5,1,1,6,0,6,248,4,4,4,
+  6,0,3,96,144,144,96,5,7,7,6,0,0,32,32,248,
+  32,32,0,248,4,5,5,6,0,3,96,144,32,64,240,3,
+  5,5,6,0,3,224,32,224,32,224,2,2,2,6,2,6,
+  64,128,5,8,8,6,0,255,136,136,136,136,152,232,128,128,
+  5,7,7,6,0,0,120,152,152,120,24,24,24,2,2,2,
+  6,2,2,192,192,2,2,2,6,2,255,64,128,3,5,5,
+  6,0,3,64,192,64,64,224,5,7,7,6,0,1,112,136,
+  136,136,112,0,248,5,5,5,6,0,1,160,80,40,80,160,
+  5,7,7,6,0,0,136,144,168,88,184,8,8,5,7,7,
+  6,0,0,136,144,184,72,152,32,56,5,8,8,6,0,0,
+  192,64,192,72,216,56,8,8,5,7,7,6,0,0,32,0,
+  32,64,128,136,112,5,8,8,6,0,0,64,32,0,112,136,
+  248,136,136,5,8,8,6,0,0,16,32,0,112,136,248,136,
+  136,5,8,8,6,0,0,32,80,0,112,136,248,136,136,5,
+  8,8,6,0,0,104,144,0,112,136,248,136,136,5,8,8,
+  6,0,0,80,0,112,136,136,248,136,136,5,8,8,6,0,
+  0,32,80,32,112,136,248,136,136,5,7,7,6,0,0,56,
+  96,160,184,224,160,184,5,8,8,6,0,255,112,136,128,128,
+  136,112,32,96,5,8,8,6,0,0,64,32,0,248,128,240,
+  128,248,5,8,8,6,0,0,8,16,0,248,128,240,128,248,
+  5,8,8,6,0,0,32,80,0,248,128,240,128,248,5,7,
+  7,6,0,0,80,0,248,128,240,128,248,3,8,8,6,1,
+  0,128,64,0,224,64,64,64,224,3,8,8,6,1,0,32,
+  64,0,224,64,64,64,224,3,8,8,6,1,0,64,160,0,
+  224,64,64,64,224,3,7,7,6,1,0,160,0,224,64,64,
+  64,224,5,9,9,6,0,255,80,32,112,136,128,184,136,136,
+  112,5,8,8,6,0,0,104,144,0,136,200,168,152,136,5,
+  8,8,6,0,0,64,32,112,136,136,136,136,112,5,8,8,
+  6,0,0,16,32,112,136,136,136,136,112,5,8,8,6,0,
+  0,32,80,0,112,136,136,136,112,5,8,8,6,0,0,104,
+  144,0,112,136,136,136,112,5,8,8,6,0,0,80,0,112,
+  136,136,136,136,112,5,5,5,6,0,1,136,80,32,80,136,
+  5,8,8,6,0,255,16,112,168,168,168,168,112,64,5,8,
+  8,6,0,0,64,32,136,136,136,136,136,112,5,8,8,6,
+  0,0,16,32,136,136,136,136,136,112,5,8,8,6,0,0,
+  32,80,0,136,136,136,136,112,5,8,8,6,0,0,80,0,
+  136,136,136,136,136,112,1,7,7,6,2,0,128,0,128,128,
+  128,128,128,5,9,9,6,0,255,120,128,128,112,8,8,240,
+  32,96,4,8,8,6,1,255,96,144,144,160,144,144,224,128,
+  5,8,8,6,0,0,64,32,0,112,8,120,136,120,5,8,
+  8,6,0,0,16,32,0,112,8,120,136,120,5,8,8,6,
+  0,0,32,80,0,112,8,120,136,120,5,8,8,6,0,0,
+  104,144,0,112,8,120,136,120,5,7,7,6,0,0,80,0,
+  112,8,120,136,120,5,8,8,6,0,0,32,80,32,112,8,
+  120,136,120,5,6,6,6,0,0,208,40,120,160,168,80,5,
+  7,7,6,0,255,112,128,128,136,112,32,96,5,8,8,6,
+  0,0,64,32,0,112,136,248,128,112,5,8,8,6,0,0,
+  16,32,0,112,136,248,128,112,5,8,8,6,0,0,32,80,
+  0,112,136,248,128,112,5,7,7,6,0,0,80,0,112,136,
+  248,128,112,3,8,8,6,1,0,128,64,0,64,192,64,64,
+  224,3,8,8,6,1,0,32,64,0,64,192,64,64,224,3,
+  8,8,6,1,0,64,160,0,64,192,64,64,224,3,7,7,
+  6,1,0,160,0,64,192,64,64,224,5,8,8,6,0,255,
+  80,32,112,136,136,120,8,112,5,8,8,6,0,0,104,144,
+  0,176,200,136,136,136,5,8,8,6,0,0,64,32,0,112,
+  136,136,136,112,5,8,8,6,0,0,16,32,0,112,136,136,
+  136,112,5,8,8,6,0,0,32,80,0,112,136,136,136,112,
+  5,8,8,6,0,0,104,144,0,112,136,136,136,112,5,7,
+  7,6,0,0,80,0,112,136,136,136,112,5,5,5,6,0,
+  1,32,0,248,0,32,5,7,7,6,0,255,16,112,168,168,
+  168,112,64,5,8,8,6,0,0,64,32,0,136,136,136,152,
+  104,5,8,8,6,0,0,16,32,0,136,136,136,152,104,5,
+  8,8,6,0,0,32,80,0,136,136,136,152,104,5,7,7,
+  6,0,0,80,0,136,136,136,152,104,1,5,5,6,2,0,
+  128,128,128,128,128,5,7,7,6,0,255,112,128,112,8,240,
+  32,96,5,8,8,6,0,255,80,0,136,136,136,120,8,112
+  };

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_ISO10646_Greek.h

@@ -0,0 +1,205 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/*
+  Fontname: ISO10646_4_Greek
+  Copyright: A. Hardtung, public domain
+  Capital A Height: 7, '1' Height: 7
+  Calculated Max Values w= 5 h= 9 x= 2 y= 6 dx= 6 dy= 0 ascent= 8 len= 9
+  Font Bounding box     w= 6 h= 9 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
+  Pure Font   ascent = 7 descent=-1
+  X Font      ascent = 7 descent=-1
+  Max Font    ascent = 8 descent=-1
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t ISO10646_Greek_5x7[2715] U8G_SECTION(".progmem.ISO10646_Greek_5x7") = {
+  0,6,9,0,254,7,1,145,3,32,32,255,255,8,255,7,
+  255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
+  128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
+  0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
+  120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
+  64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
+  2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
+  64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
+  32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
+  5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
+  64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
+  192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
+  0,0,112,136,152,168,200,136,112,3,7,7,6,1,0,64,
+  192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
+  128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
+  5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
+  6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
+  48,64,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
+  32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
+  112,5,7,7,6,0,0,112,136,136,120,8,16,96,2,5,
+  5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
+  192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
+  32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
+  0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
+  8,16,32,0,32,5,6,6,6,0,0,112,136,8,104,168,
+  112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,7,
+  7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,0,
+  0,112,136,128,128,128,136,112,5,7,7,6,0,0,224,144,
+  136,136,136,144,224,5,7,7,6,0,0,248,128,128,240,128,
+  128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,5,
+  7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,6,
+  0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,128,
+  128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,16,
+  16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,136,
+  5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,7,
+  6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,0,
+  136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,136,
+  136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,128,
+  128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,7,
+  7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,0,
+  0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,32,
+  32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,136,
+  136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,5,
+  7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,6,
+  0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,136,
+  136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,32,
+  64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,224,
+  5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,1,
+  0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,80,
+  136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,64,
+  5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,0,
+  0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,128,
+  128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,120,
+  5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,0,
+  0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,136,
+  136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,136,
+  136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,8,
+  8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,6,
+  0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,192,
+  64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,168,
+  168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,6,
+  0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,136,
+  240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,5,
+  5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,0,
+  112,128,112,8,240,5,7,7,6,0,0,64,64,224,64,64,
+  72,48,5,5,5,6,0,0,136,136,136,152,104,5,5,5,
+  6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,136,
+  168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,6,
+  6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,0,
+  248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,64,
+  64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,3,
+  7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,6,
+  0,3,104,144,0,0,0,6,0,0,0,0,0,6,0,0,
+  0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,
+  0,0,2,2,2,6,1,6,64,128,3,3,3,6,1,5,
+  32,64,160,5,8,8,6,0,0,64,160,80,80,136,248,136,
+  136,2,2,2,6,1,2,192,192,5,8,8,6,0,0,64,
+  128,248,128,240,128,128,248,5,8,8,6,0,0,64,128,136,
+  136,248,136,136,136,4,8,8,6,0,0,64,128,112,32,32,
+  32,32,112,0,0,0,6,0,0,5,8,8,6,0,0,64,
+  128,112,136,136,136,136,112,0,0,0,6,0,0,5,8,8,
+  6,0,0,64,128,8,136,112,32,32,32,5,8,8,6,0,
+  0,64,128,112,136,136,136,80,216,3,8,8,6,1,0,32,
+  64,160,0,64,64,64,32,5,7,7,6,0,0,32,80,136,
+  136,248,136,136,5,7,7,6,0,0,240,72,72,112,72,72,
+  240,5,7,7,6,0,0,248,128,128,128,128,128,128,5,6,
+  6,6,0,0,32,80,80,136,136,248,5,7,7,6,0,0,
+  248,128,128,240,128,128,248,5,7,7,6,0,0,248,8,16,
+  32,64,128,248,5,7,7,6,0,0,136,136,136,248,136,136,
+  136,5,7,7,6,0,0,112,136,136,168,136,136,112,3,7,
+  7,6,1,0,224,64,64,64,64,64,224,5,7,7,6,0,
+  0,136,144,160,192,160,144,136,5,7,7,6,0,0,32,80,
+  136,136,136,136,136,5,7,7,6,0,0,136,216,168,168,136,
+  136,136,5,7,7,6,0,0,136,200,200,168,152,152,136,5,
+  7,7,6,0,0,248,0,0,112,0,0,248,5,7,7,6,
+  0,0,112,136,136,136,136,136,112,5,7,7,6,0,0,248,
+  80,80,80,80,80,80,5,7,7,6,0,0,240,136,136,240,
+  128,128,128,0,0,0,6,0,0,5,7,7,6,0,0,248,
+  128,64,32,64,128,248,5,7,7,6,0,0,248,32,32,32,
+  32,32,32,5,7,7,6,0,0,136,136,80,32,32,32,32,
+  5,7,7,6,0,0,112,32,112,168,112,32,112,5,7,7,
+  6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
+  168,168,168,168,112,32,32,5,6,6,6,0,0,112,136,136,
+  80,80,216,3,8,8,6,1,0,160,0,224,64,64,64,64,
+  224,5,8,8,6,0,0,80,0,136,136,136,80,32,32,5,
+  8,8,6,0,0,32,64,8,104,152,144,144,104,5,8,8,
+  6,0,0,32,64,0,112,136,224,136,112,5,9,9,6,0,
+  255,32,64,0,112,136,136,136,136,8,2,8,8,6,1,0,
+  64,128,0,128,128,128,128,64,5,8,8,6,0,0,16,32,
+  80,0,136,136,136,112,5,6,6,6,0,0,8,104,152,144,
+  144,104,4,6,6,6,0,255,96,144,240,144,224,128,5,6,
+  6,6,0,255,136,72,80,32,32,64,5,6,6,6,0,0,
+  48,64,112,136,136,112,5,5,5,6,0,0,112,136,224,136,
+  112,5,8,8,6,0,255,128,112,64,128,128,112,8,112,5,
+  6,6,6,0,255,184,200,136,136,136,8,5,5,5,6,0,
+  0,112,136,248,136,112,3,5,5,6,1,0,128,128,128,128,
+  96,4,5,5,6,0,0,144,160,192,160,144,5,6,6,6,
+  0,0,64,32,32,80,80,136,5,6,6,6,0,255,136,136,
+  136,216,168,128,5,5,5,6,0,0,136,136,80,96,32,5,
+  9,9,6,0,255,128,224,128,112,32,64,240,8,112,5,5,
+  5,6,0,0,112,136,136,136,112,5,5,5,6,0,0,248,
+  80,80,80,80,5,6,6,6,0,255,112,136,136,200,176,128,
+  5,7,7,6,0,255,48,64,128,64,48,8,112,5,5,5,
+  6,0,0,104,144,144,144,96,4,5,5,6,0,0,240,64,
+  64,64,48,5,5,5,6,0,0,136,136,144,144,224,5,7,
+  7,6,0,255,32,168,168,168,112,32,32,5,6,6,6,0,
+  255,136,80,32,32,80,136,5,6,6,6,0,255,168,168,168,
+  168,112,32,5,5,5,6,0,0,80,136,136,168,112,4,7,
+  7,6,0,0,160,0,64,64,64,64,48,5,7,7,6,0,
+  0,80,0,136,136,144,144,224,4,8,8,6,0,0,32,64,
+  0,96,144,144,144,96,5,8,8,6,0,0,32,64,0,136,
+  136,144,144,96,5,8,8,6,0,0,32,64,0,80,136,136,
+  168,112,5,7,7,6,0,255,144,160,192,160,144,136,16,5,
+  8,8,6,0,0,96,144,160,128,240,136,136,112,5,7,7,
+  6,0,0,112,80,56,144,144,144,96,5,6,6,6,0,0,
+  152,80,32,32,32,32,5,8,8,6,0,0,64,128,152,80,
+  32,32,32,32,5,8,8,6,0,0,80,0,152,80,32,32,
+  32,32,5,7,7,6,0,255,48,168,168,168,168,112,32,5,
+  5,5,6,0,0,248,80,80,80,88,5,6,6,6,0,255,
+  136,80,112,80,136,16,5,7,7,6,0,255,112,136,136,136,
+  112,32,112,5,6,6,6,0,255,112,136,136,112,32,112,5,
+  6,6,6,0,0,112,136,128,112,32,112,5,7,7,6,0,
+  255,8,8,112,128,112,16,96,5,6,6,6,0,0,248,128,
+  128,240,128,128,4,5,5,6,0,0,240,128,224,128,128,5,
+  6,6,6,0,0,248,0,0,112,0,248,4,5,5,6,0,
+  0,64,128,240,16,32,5,7,7,6,0,0,224,80,40,40,
+  8,8,16,5,7,7,6,0,0,192,32,80,40,8,8,8,
+  5,7,7,6,0,255,168,168,168,168,88,8,112,5,6,6,
+  6,0,255,168,168,168,88,8,112,5,6,6,6,0,0,104,
+  136,136,120,8,8,5,6,6,6,0,255,104,136,136,120,8,
+  8,4,8,8,6,0,255,128,224,144,144,144,144,32,192,5,
+  5,5,6,0,0,104,144,112,16,224,5,6,6,6,0,0,
+  96,144,16,96,136,112,4,6,6,6,0,0,96,144,16,96,
+  128,112,5,6,6,6,0,0,136,80,32,80,136,248,5,5,
+  5,6,0,0,136,80,32,80,112,5,6,6,6,0,0,120,
+  128,240,136,136,112,4,5,5,6,0,0,240,128,224,144,96,
+  3,6,6,6,1,0,64,224,64,64,64,64,3,6,6,6,
+  1,255,64,224,64,64,64,128,5,5,5,6,0,0,136,80,
+  112,80,136,5,6,6,6,0,255,112,136,136,240,128,112,4,
+  5,5,6,0,0,112,128,128,128,112,2,8,8,6,1,255,
+  64,0,192,64,64,64,64,128,5,7,7,6,0,0,112,136,
+  136,248,136,136,112,4,5,5,6,0,0,112,128,224,128,112,
+  4,5,5,6,0,0,224,16,112,16,224,5,7,7,6,0,
+  0,128,240,136,136,136,240,128,4,7,7,6,0,255,128,224,
+  144,144,144,224,128,5,6,6,6,0,0,112,136,128,128,136,
+  112,5,6,6,6,0,0,136,216,168,136,136,136,5,6,6,
+  6,0,255,136,216,168,136,136,128,5,8,8,6,0,255,112,
+  136,136,136,112,64,224,64,5,6,6,6,0,0,112,136,8,
+  8,136,112,5,6,6,6,0,0,112,136,160,128,136,112,5,
+  6,6,6,0,0,112,136,40,8,136,112};

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_ISO10646_Kana.h

@@ -0,0 +1,192 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+  Fontname: ISO10646_Kana
+  Copyright: A. Hardtung, public domain
+  Capital A Height: 7, '1' Height: 7
+  Calculated Max Values w= 5 h= 8 x= 2 y= 5 dx= 6 dy= 0 ascent= 8 len= 8
+  Font Bounding box     w= 6 h= 9 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
+  Pure Font   ascent = 7 descent=-1
+  X Font      ascent = 7 descent=-1
+  Max Font    ascent = 8 descent=-1
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t ISO10646_Kana_5x7[2482] U8G_SECTION(".progmem.ISO10646_Kana_5x7") = {
+  0, 6, 9, 0, 254, 7, 1, 145, 3, 32, 32, 255, 255, 8, 255, 7,
+  255, 0, 0, 0, 6, 0, 0, 1, 7, 7, 6, 2, 0, 128, 128, 128,
+  128, 128, 0, 128, 3, 2, 2, 6, 1, 5, 160, 160, 5, 7, 7, 6,
+  0, 0, 80, 80, 248, 80, 248, 80, 80, 5, 7, 7, 6, 0, 0, 32,
+  120, 160, 112, 40, 240, 32, 5, 7, 7, 6, 0, 0, 192, 200, 16, 32,
+  64, 152, 24, 5, 7, 7, 6, 0, 0, 96, 144, 160, 64, 168, 144, 104,
+  2, 3, 3, 6, 1, 4, 192, 64, 128, 3, 7, 7, 6, 1, 0, 32,
+  64, 128, 128, 128, 64, 32, 3, 7, 7, 6, 1, 0, 128, 64, 32, 32,
+  32, 64, 128, 5, 5, 5, 6, 0, 1, 32, 168, 112, 168, 32, 5, 5,
+  5, 6, 0, 1, 32, 32, 248, 32, 32, 2, 3, 3, 6, 2, 255, 192,
+  64, 128, 5, 1, 1, 6, 0, 3, 248, 2, 2, 2, 6, 2, 0, 192,
+  192, 5, 5, 5, 6, 0, 1, 8, 16, 32, 64, 128, 5, 7, 7, 6,
+  0, 0, 112, 136, 152, 168, 200, 136, 112, 3, 7, 7, 6, 1, 0, 64,
+  192, 64, 64, 64, 64, 224, 5, 7, 7, 6, 0, 0, 112, 136, 8, 112,
+  128, 128, 248, 5, 7, 7, 6, 0, 0, 248, 16, 32, 16, 8, 8, 240,
+  5, 7, 7, 6, 0, 0, 16, 48, 80, 144, 248, 16, 16, 5, 7, 7,
+  6, 0, 0, 248, 128, 240, 8, 8, 136, 112, 5, 7, 7, 6, 0, 0,
+  48, 64, 128, 240, 136, 136, 112, 5, 7, 7, 6, 0, 0, 248, 8, 16,
+  32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 112, 136, 136, 112, 136, 136,
+  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 120, 8, 16, 96, 2, 5,
+  5, 6, 2, 0, 192, 192, 0, 192, 192, 2, 6, 6, 6, 2, 255, 192,
+  192, 0, 192, 64, 128, 4, 7, 7, 6, 0, 0, 16, 32, 64, 128, 64,
+  32, 16, 5, 3, 3, 6, 0, 2, 248, 0, 248, 4, 7, 7, 6, 1,
+  0, 128, 64, 32, 16, 32, 64, 128, 5, 7, 7, 6, 0, 0, 112, 136,
+  8, 16, 32, 0, 32, 5, 6, 6, 6, 0, 0, 112, 136, 8, 104, 168,
+  112, 5, 7, 7, 6, 0, 0, 112, 136, 136, 248, 136, 136, 136, 5, 7,
+  7, 6, 0, 0, 240, 136, 136, 240, 136, 136, 240, 5, 7, 7, 6, 0,
+  0, 112, 136, 128, 128, 128, 136, 112, 5, 7, 7, 6, 0, 0, 224, 144,
+  136, 136, 136, 144, 224, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128,
+  128, 248, 5, 7, 7, 6, 0, 0, 248, 128, 128, 240, 128, 128, 128, 5,
+  7, 7, 6, 0, 0, 112, 136, 128, 184, 136, 136, 112, 5, 7, 7, 6,
+  0, 0, 136, 136, 136, 248, 136, 136, 136, 1, 7, 7, 6, 2, 0, 128,
+  128, 128, 128, 128, 128, 128, 5, 7, 7, 6, 0, 0, 56, 16, 16, 16,
+  16, 144, 96, 5, 7, 7, 6, 0, 0, 136, 144, 160, 192, 160, 144, 136,
+  5, 7, 7, 6, 0, 0, 128, 128, 128, 128, 128, 128, 248, 5, 7, 7,
+  6, 0, 0, 136, 216, 168, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0,
+  136, 136, 200, 168, 152, 136, 136, 5, 7, 7, 6, 0, 0, 112, 136, 136,
+  136, 136, 136, 112, 5, 7, 7, 6, 0, 0, 240, 136, 136, 240, 128, 128,
+  128, 5, 7, 7, 6, 0, 0, 112, 136, 136, 136, 168, 144, 104, 5, 7,
+  7, 6, 0, 0, 240, 136, 136, 240, 160, 144, 136, 5, 7, 7, 6, 0,
+  0, 120, 128, 128, 112, 8, 8, 240, 5, 7, 7, 6, 0, 0, 248, 32,
+  32, 32, 32, 32, 32, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136,
+  136, 112, 5, 7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 80, 32, 5,
+  7, 7, 6, 0, 0, 136, 136, 136, 136, 136, 168, 80, 5, 7, 7, 6,
+  0, 0, 136, 136, 80, 32, 80, 136, 136, 5, 7, 7, 6, 0, 0, 136,
+  136, 136, 80, 32, 32, 32, 5, 7, 7, 6, 0, 0, 248, 8, 16, 32,
+  64, 128, 248, 3, 7, 7, 6, 1, 0, 224, 128, 128, 128, 128, 128, 224,
+  5, 5, 5, 6, 0, 1, 128, 64, 32, 16, 8, 3, 7, 7, 6, 1,
+  0, 224, 32, 32, 32, 32, 32, 224, 5, 3, 3, 6, 0, 4, 32, 80,
+  136, 5, 1, 1, 6, 0, 0, 248, 2, 2, 2, 6, 2, 5, 128, 64,
+  5, 5, 5, 6, 0, 0, 112, 8, 120, 136, 120, 5, 7, 7, 6, 0,
+  0, 128, 128, 176, 200, 136, 136, 240, 5, 5, 5, 6, 0, 0, 112, 128,
+  128, 136, 112, 5, 7, 7, 6, 0, 0, 8, 8, 104, 152, 136, 136, 120,
+  5, 5, 5, 6, 0, 0, 112, 136, 248, 128, 112, 5, 7, 7, 6, 0,
+  0, 48, 72, 224, 64, 64, 64, 64, 5, 6, 6, 6, 0, 255, 112, 136,
+  136, 120, 8, 112, 5, 7, 7, 6, 0, 0, 128, 128, 176, 200, 136, 136,
+  136, 1, 7, 7, 6, 2, 0, 128, 0, 128, 128, 128, 128, 128, 3, 8,
+  8, 6, 1, 255, 32, 0, 32, 32, 32, 32, 160, 64, 4, 7, 7, 6,
+  0, 0, 128, 128, 144, 160, 192, 160, 144, 3, 7, 7, 6, 1, 0, 192,
+  64, 64, 64, 64, 64, 224, 5, 5, 5, 6, 0, 0, 208, 168, 168, 168,
+  168, 5, 5, 5, 6, 0, 0, 176, 200, 136, 136, 136, 5, 5, 5, 6,
+  0, 0, 112, 136, 136, 136, 112, 5, 6, 6, 6, 0, 255, 240, 136, 136,
+  240, 128, 128, 5, 6, 6, 6, 0, 255, 120, 136, 136, 120, 8, 8, 5,
+  5, 5, 6, 0, 0, 176, 200, 128, 128, 128, 5, 5, 5, 6, 0, 0,
+  112, 128, 112, 8, 240, 5, 7, 7, 6, 0, 0, 64, 64, 224, 64, 64,
+  72, 48, 5, 5, 5, 6, 0, 0, 136, 136, 136, 152, 104, 5, 5, 5,
+  6, 0, 0, 136, 136, 136, 80, 32, 5, 5, 5, 6, 0, 0, 136, 136,
+  168, 168, 80, 5, 5, 5, 6, 0, 0, 136, 80, 32, 80, 136, 5, 6,
+  6, 6, 0, 255, 136, 136, 136, 120, 8, 112, 5, 5, 5, 6, 0, 0,
+  248, 16, 32, 64, 248, 3, 7, 7, 6, 1, 0, 32, 64, 64, 128, 64,
+  64, 32, 1, 7, 7, 6, 2, 0, 128, 128, 128, 128, 128, 128, 128, 3,
+  7, 7, 6, 1, 0, 128, 64, 64, 32, 64, 64, 128, 5, 2, 2, 6,
+  0, 3, 104, 144, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
+  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
+  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
+  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
+  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
+  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
+  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
+  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
+  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
+  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0,
+  0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6,
+  0, 0, 0, 0, 0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 0, 0,
+  0, 6, 0, 0, 0, 0, 0, 6, 0, 0, 5, 3, 3, 6, 0, 1,
+  248, 0, 248, 4, 4, 4, 6, 0, 0, 240, 16, 96, 64, 5, 6, 6,
+  6, 0, 0, 248, 8, 40, 48, 32, 64, 3, 4, 4, 6, 1, 0, 32,
+  64, 192, 64, 4, 6, 6, 6, 0, 0, 16, 32, 96, 160, 32, 32, 4,
+  4, 4, 6, 0, 0, 32, 240, 144, 32, 5, 6, 6, 6, 0, 0, 32,
+  248, 136, 8, 16, 32, 3, 4, 4, 6, 1, 0, 224, 64, 64, 224, 5,
+  5, 5, 6, 0, 0, 248, 32, 32, 32, 248, 4, 4, 4, 6, 0, 0,
+  32, 240, 96, 160, 5, 6, 6, 6, 0, 0, 16, 248, 48, 80, 144, 16,
+  5, 6, 6, 6, 0, 0, 64, 248, 72, 72, 72, 144, 5, 8, 8, 6,
+  0, 0, 40, 0, 64, 248, 72, 72, 72, 144, 5, 6, 6, 6, 0, 0,
+  32, 248, 32, 248, 32, 32, 5, 8, 8, 6, 0, 0, 40, 0, 32, 248,
+  32, 248, 32, 32, 4, 5, 5, 6, 0, 0, 112, 144, 16, 32, 192, 5,
+  7, 7, 6, 0, 0, 40, 0, 112, 144, 16, 32, 192, 5, 6, 6, 6,
+  0, 0, 64, 120, 144, 16, 16, 32, 5, 8, 8, 6, 0, 0, 40, 0,
+  64, 120, 144, 16, 16, 32, 5, 5, 5, 6, 0, 0, 248, 8, 8, 8,
+  248, 5, 7, 7, 6, 0, 0, 40, 0, 248, 8, 8, 8, 248, 5, 6,
+  6, 6, 0, 0, 80, 248, 80, 16, 32, 64, 5, 8, 8, 6, 0, 0,
+  40, 0, 80, 248, 80, 16, 32, 64, 5, 5, 5, 6, 0, 0, 192, 8,
+  200, 16, 224, 5, 7, 7, 6, 0, 0, 40, 0, 192, 8, 200, 16, 224,
+  5, 5, 5, 6, 0, 0, 248, 16, 32, 80, 136, 5, 7, 7, 6, 0,
+  0, 40, 0, 248, 16, 32, 80, 136, 5, 6, 6, 6, 0, 0, 64, 248,
+  72, 80, 64, 56, 5, 8, 8, 6, 0, 0, 40, 0, 64, 248, 72, 80,
+  64, 56, 5, 5, 5, 6, 0, 0, 136, 136, 72, 16, 96, 5, 7, 7,
+  6, 0, 0, 40, 0, 136, 136, 72, 16, 96, 5, 5, 5, 6, 0, 0,
+  120, 72, 168, 16, 96, 5, 7, 7, 6, 0, 0, 40, 0, 120, 72, 168,
+  16, 96, 5, 6, 6, 6, 0, 0, 16, 224, 32, 248, 32, 64, 5, 8,
+  8, 6, 0, 0, 40, 0, 16, 224, 32, 248, 32, 64, 5, 4, 4, 6,
+  0, 0, 168, 168, 8, 48, 5, 5, 5, 6, 0, 0, 168, 168, 8, 16,
+  32, 5, 7, 7, 6, 0, 0, 40, 0, 168, 168, 8, 16, 32, 5, 6,
+  6, 6, 0, 0, 112, 0, 248, 32, 32, 64, 5, 8, 8, 6, 0, 0,
+  40, 0, 112, 0, 248, 32, 32, 64, 3, 6, 6, 6, 1, 0, 128, 128,
+  192, 160, 128, 128, 4, 8, 8, 6, 1, 0, 80, 0, 128, 128, 192, 160,
+  128, 128, 5, 6, 6, 6, 0, 0, 32, 248, 32, 32, 64, 128, 5, 5,
+  5, 6, 0, 0, 112, 0, 0, 0, 248, 5, 5, 5, 6, 0, 0, 248,
+  8, 80, 32, 208, 5, 6, 6, 6, 0, 0, 32, 248, 16, 32, 112, 168,
+  3, 6, 6, 6, 1, 0, 32, 32, 32, 32, 64, 128, 5, 5, 5, 6,
+  0, 0, 16, 136, 136, 136, 136, 5, 7, 7, 6, 0, 0, 40, 0, 16,
+  136, 136, 136, 136, 5, 8, 8, 6, 0, 0, 24, 24, 0, 16, 136, 136,
+  136, 136, 5, 6, 6, 6, 0, 0, 128, 128, 248, 128, 128, 120, 5, 7,
+  7, 6, 0, 0, 40, 128, 128, 248, 128, 128, 120, 5, 7, 7, 6, 0,
+  0, 24, 152, 128, 248, 128, 128, 120, 5, 5, 5, 6, 0, 0, 248, 8,
+  8, 16, 96, 5, 7, 7, 6, 0, 0, 40, 0, 248, 8, 8, 16, 96,
+  5, 8, 8, 6, 0, 0, 24, 24, 0, 248, 8, 8, 16, 96, 5, 4,
+  4, 6, 0, 1, 64, 160, 16, 8, 5, 6, 6, 6, 0, 1, 40, 0,
+  64, 160, 16, 8, 5, 6, 6, 6, 0, 1, 24, 24, 64, 160, 16, 8,
+  5, 6, 6, 6, 0, 0, 32, 248, 32, 168, 168, 32, 5, 8, 8, 6,
+  0, 0, 40, 0, 32, 248, 32, 168, 168, 32, 5, 8, 8, 6, 0, 0,
+  24, 24, 32, 248, 32, 168, 168, 32, 5, 5, 5, 6, 0, 0, 248, 8,
+  80, 32, 16, 4, 5, 5, 6, 1, 0, 224, 0, 224, 0, 240, 5, 5,
+  5, 6, 0, 0, 32, 64, 136, 248, 8, 5, 5, 5, 6, 0, 0, 8,
+  40, 16, 40, 192, 5, 5, 5, 6, 0, 0, 248, 64, 248, 64, 56, 5,
+  4, 4, 6, 0, 0, 64, 248, 80, 64, 5, 6, 6, 6, 0, 0, 64,
+  248, 72, 80, 64, 64, 4, 4, 4, 6, 0, 0, 96, 32, 32, 240, 5,
+  5, 5, 6, 0, 0, 112, 16, 16, 16, 248, 4, 5, 5, 6, 0, 0,
+  240, 16, 240, 16, 240, 5, 5, 5, 6, 0, 0, 248, 8, 248, 8, 248,
+  5, 6, 6, 6, 0, 0, 112, 0, 248, 8, 16, 32, 4, 6, 6, 6,
+  0, 0, 144, 144, 144, 144, 16, 32, 5, 5, 5, 6, 0, 0, 32, 160,
+  168, 168, 176, 4, 5, 5, 6, 0, 0, 128, 128, 144, 160, 192, 5, 5,
+  5, 6, 0, 0, 248, 136, 136, 136, 248, 4, 4, 4, 6, 0, 0, 240,
+  144, 16, 32, 5, 5, 5, 6, 0, 0, 248, 136, 8, 16, 32, 5, 6,
+  6, 6, 0, 0, 16, 248, 80, 80, 248, 16, 5, 5, 5, 6, 0, 0,
+  248, 8, 48, 32, 248, 5, 5, 5, 6, 0, 0, 248, 8, 248, 8, 48,
+  5, 5, 5, 6, 0, 0, 192, 8, 8, 16, 224, 5, 8, 8, 6, 0,
+  0, 40, 0, 32, 248, 136, 8, 16, 32, 4, 4, 4, 6, 0, 0, 64,
+  240, 80, 160, 4, 4, 4, 6, 0, 0, 64, 240, 32, 64, 5, 7, 7,
+  6, 0, 0, 40, 0, 248, 136, 8, 16, 96, 5, 8, 8, 6, 0, 0,
+  40, 0, 16, 248, 80, 80, 248, 16, 5, 7, 7, 6, 0, 0, 40, 0,
+  248, 8, 48, 32, 248, 5, 7, 7, 6, 0, 0, 40, 0, 248, 8, 248,
+  8, 48, 2, 2, 2, 6, 2, 2, 192, 192, 5, 1, 1, 6, 0, 2,
+  248, 5, 4, 4, 6, 0, 1, 128, 96, 16, 8, 5, 5, 5, 6, 0,
+  1, 40, 128, 96, 16, 8, 5, 6, 6, 6, 0, 0, 248, 8, 8, 8,
+  8, 8
+};

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_ISO10646_SK.h

@@ -0,0 +1,151 @@
+/*
+  Fontname: ISO10646_SK
+  Copyright: A. Hardtung, modified by Roman Moravcik
+  Capital A Height: 7, '1' Height: 7
+  Calculated Max Values w= 6 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len= 9
+  Font Bounding box     w= 6 h= 9 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
+  Pure Font   ascent = 7 descent=-1
+  X Font      ascent = 7 descent=-1
+  Max Font    ascent = 8 descent=-1
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t ISO10646_SK[2203] U8G_SECTION(".progmem.ISO10646_SK") = {
+  0,6,9,0,254,7,1,146,3,33,32,255,255,8,255,7,
+  255,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
+  128,128,0,128,3,2,2,6,1,5,160,160,5,7,7,6,
+  0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,32,
+  120,160,112,40,240,32,5,7,7,6,0,0,192,200,16,32,
+  64,152,24,5,7,7,6,0,0,96,144,160,64,168,144,104,
+  2,3,3,6,1,4,192,64,128,3,7,7,6,1,0,32,
+  64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,32,
+  32,64,128,5,5,5,6,0,1,32,168,112,168,32,5,5,
+  5,6,0,1,32,32,248,32,32,2,3,3,6,2,255,192,
+  64,128,5,1,1,6,0,3,248,2,2,2,6,2,0,192,
+  192,5,5,5,6,0,1,8,16,32,64,128,5,7,7,6,
+  0,0,112,136,136,136,136,136,112,3,7,7,6,1,0,64,
+  192,64,64,64,64,224,5,7,7,6,0,0,112,136,8,112,
+  128,128,248,5,7,7,6,0,0,248,16,32,16,8,8,240,
+  5,7,7,6,0,0,16,48,80,144,248,16,16,5,7,7,
+  6,0,0,248,128,240,8,8,136,112,5,7,7,6,0,0,
+  112,128,128,240,136,136,112,5,7,7,6,0,0,248,8,16,
+  32,32,32,32,5,7,7,6,0,0,112,136,136,112,136,136,
+  112,5,7,7,6,0,0,112,136,136,120,8,8,112,2,5,
+  5,6,2,0,192,192,0,192,192,2,6,6,6,2,255,192,
+  192,0,192,64,128,4,7,7,6,0,0,16,32,64,128,64,
+  32,16,5,3,3,6,0,2,248,0,248,4,7,7,6,1,
+  0,128,64,32,16,32,64,128,5,7,7,6,0,0,112,136,
+  8,16,32,0,32,5,7,7,6,0,0,112,136,8,104,168,
+  168,112,5,7,7,6,0,0,112,136,136,248,136,136,136,5,
+  7,7,6,0,0,240,136,136,240,136,136,240,5,7,7,6,
+  0,0,112,136,128,128,128,136,112,5,7,7,6,0,0,240,
+  136,136,136,136,136,240,5,7,7,6,0,0,248,128,128,240,
+  128,128,248,5,7,7,6,0,0,248,128,128,240,128,128,128,
+  5,7,7,6,0,0,112,136,128,184,136,136,112,5,7,7,
+  6,0,0,136,136,136,248,136,136,136,1,7,7,6,2,0,
+  128,128,128,128,128,128,128,5,7,7,6,0,0,56,16,16,
+  16,16,144,96,5,7,7,6,0,0,136,144,160,192,160,144,
+  136,5,7,7,6,0,0,128,128,128,128,128,128,248,5,7,
+  7,6,0,0,136,216,168,136,136,136,136,5,7,7,6,0,
+  0,136,136,200,168,152,136,136,5,7,7,6,0,0,112,136,
+  136,136,136,136,112,5,7,7,6,0,0,240,136,136,240,128,
+  128,128,5,7,7,6,0,0,112,136,136,136,168,144,104,5,
+  7,7,6,0,0,240,136,136,240,160,144,136,5,7,7,6,
+  0,0,120,128,128,112,8,8,240,5,7,7,6,0,0,248,
+  32,32,32,32,32,32,5,7,7,6,0,0,136,136,136,136,
+  136,136,112,5,7,7,6,0,0,136,136,136,136,136,80,32,
+  5,7,7,6,0,0,136,136,136,136,136,168,80,5,7,7,
+  6,0,0,136,136,80,32,80,136,136,5,7,7,6,0,0,
+  136,136,136,80,32,32,32,5,7,7,6,0,0,248,8,16,
+  32,64,128,248,3,7,7,6,1,0,224,128,128,128,128,128,
+  224,5,5,5,6,0,1,128,64,32,16,8,3,7,7,6,
+  1,0,224,32,32,32,32,32,224,5,3,3,6,0,4,32,
+  80,136,5,1,1,6,0,0,248,2,2,2,6,2,5,128,
+  64,5,5,5,6,0,0,112,8,120,136,120,5,7,7,6,
+  0,0,128,128,176,200,136,136,240,5,5,5,6,0,0,112,
+  128,128,136,112,5,7,7,6,0,0,8,8,104,152,136,136,
+  120,5,5,5,6,0,0,112,136,248,128,112,5,7,7,6,
+  0,0,48,72,224,64,64,64,64,5,6,6,6,0,255,112,
+  136,136,120,8,112,5,7,7,6,0,0,128,128,176,200,136,
+  136,136,1,7,7,6,2,0,128,0,128,128,128,128,128,3,
+  8,8,6,1,255,32,0,32,32,32,32,160,64,4,7,7,
+  6,0,0,128,128,144,160,192,160,144,3,7,7,6,1,0,
+  192,64,64,64,64,64,224,5,5,5,6,0,0,208,168,168,
+  168,168,5,5,5,6,0,0,176,200,136,136,136,5,5,5,
+  6,0,0,112,136,136,136,112,5,6,6,6,0,255,240,136,
+  136,240,128,128,5,6,6,6,0,255,120,136,136,120,8,8,
+  5,5,5,6,0,0,176,200,128,128,128,5,5,5,6,0,
+  0,112,128,112,8,240,4,7,7,6,0,0,64,64,224,64,
+  64,64,48,5,5,5,6,0,0,136,136,136,152,104,5,5,
+  5,6,0,0,136,136,136,80,32,5,5,5,6,0,0,136,
+  136,168,168,80,5,5,5,6,0,0,136,80,32,80,136,5,
+  6,6,6,0,255,136,136,136,120,8,112,5,5,5,6,0,
+  0,248,16,32,64,248,3,7,7,6,1,0,32,64,64,128,
+  64,64,32,1,7,7,6,2,0,128,128,128,128,128,128,128,
+  3,7,7,6,1,0,128,64,64,32,64,64,128,5,2,2,
+  6,0,2,104,144,0,0,0,6,0,0,5,8,8,6,0,
+  0,16,32,112,136,136,248,136,136,5,8,8,6,0,0,80,
+  0,112,136,136,248,136,136,5,8,8,6,0,0,8,16,248,
+  128,128,240,128,248,3,8,8,6,1,0,32,64,224,64,64,
+  64,64,224,5,8,8,6,0,0,16,32,112,136,136,136,136,
+  112,5,8,8,6,0,0,32,80,112,136,136,136,136,112,5,
+  8,8,6,0,0,16,32,136,136,136,136,136,112,5,8,8,
+  6,0,0,16,32,136,136,80,32,32,32,5,8,8,6,0,
+  0,16,32,0,112,8,120,136,120,5,7,7,6,0,0,80,
+  0,112,8,120,136,120,5,8,8,6,0,0,16,32,0,112,
+  136,248,128,112,2,8,8,6,2,0,64,128,0,128,128,128,
+  128,128,5,8,8,6,0,0,16,32,0,112,136,136,136,112,
+  5,8,8,6,0,0,32,80,0,112,136,136,136,112,5,8,
+  8,6,0,0,16,32,0,136,136,136,152,104,5,9,9,6,
+  0,255,16,32,0,136,136,136,120,8,112,5,8,8,6,0,
+  0,80,32,112,136,128,128,136,112,5,8,8,6,0,0,80,
+  32,0,112,128,128,136,112,5,8,8,6,0,0,80,32,240,
+  136,136,136,136,240,6,8,8,6,0,0,4,20,24,112,144,
+  144,144,112,5,8,8,6,0,0,16,32,128,128,128,128,128,
+  248,3,8,8,6,1,0,32,64,0,192,64,64,64,224,5,
+  8,8,6,0,0,16,144,160,128,128,128,128,248,5,8,8,
+  6,1,0,8,200,80,64,64,64,64,224,5,8,8,6,0,
+  0,80,32,136,200,168,152,136,136,5,8,8,6,0,0,80,
+  32,0,176,200,136,136,136,5,8,8,6,0,0,16,32,240,
+  136,240,160,144,136,5,8,8,6,0,0,16,32,0,176,200,
+  128,128,128,5,8,8,6,0,0,80,32,120,128,128,112,8,
+  240,5,8,8,6,0,0,80,32,0,112,128,112,8,240,5,
+  8,8,6,0,0,80,32,248,32,32,32,32,32,6,8,8,
+  6,0,0,4,68,72,224,64,64,64,48,5,8,8,6,0,
+  0,80,32,248,8,48,64,128,248,5,8,8,6,0,0,80,
+  32,0,248,16,32,64,248,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0,0,0,0,6,0,
+  0,0,0,0,6,0,0,0,0,0,6,0,0,0,0,0,
+  6,0,0,0,0,0,6,0,0,0,0,0,6,0,0,0,
+  0,0,6,0,0,0,0,0,6,0,0};

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_Marlin_symbols.h

@@ -0,0 +1,45 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+  Fontname: Marlin_symbols
+  Copyright: Created with Fony 1.4.7
+  Capital A Height: 0, '1' Height: 0
+  Calculated Max Values w= 5 h=10 x= 0 y= 3 dx= 6 dy= 0 ascent= 8 len=10
+  Font Bounding box     w= 6 h= 9 x= 0 y=-2
+  Calculated Min Values           x= 0 y=-2 dx= 0 dy= 0
+  Pure Font   ascent = 0 descent= 0
+  X Font      ascent = 0 descent= 0
+  Max Font    ascent = 8 descent=-2
+*/
+#include <U8glib.h>
+const u8g_fntpgm_uint8_t Marlin_symbols[140] U8G_SECTION(".progmem.Marlin_symbols") = {
+  0, 6, 9, 0, 254, 0, 0, 0, 0, 0, 1, 9, 0, 8, 254, 0,
+  0, 5, 8, 8, 6, 0, 0, 64, 240, 200, 136, 136, 152, 120, 16, 5,
+  8, 8, 6, 0, 0, 192, 248, 136, 136, 136, 136, 136, 248, 5, 5, 5,
+  6, 0, 1, 32, 48, 248, 48, 32, 5, 8, 8, 6, 0, 0, 32, 112,
+  248, 32, 32, 32, 32, 224, 5, 9, 9, 6, 0, 255, 32, 112, 168, 168,
+  184, 136, 136, 112, 32, 5, 9, 9, 6, 0, 255, 224, 128, 192, 176, 168,
+  40, 48, 40, 40, 5, 9, 9, 6, 0, 255, 248, 168, 136, 136, 136, 136,
+  136, 168, 248, 5, 10, 10, 6, 0, 254, 32, 80, 80, 80, 80, 136, 168,
+  168, 136, 112, 3, 3, 3, 6, 0, 3, 64, 160, 64
+};

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_font_data_marlin.h

@@ -1,599 +0,0 @@
-/*
-  Fontname: -Misc-Fixed-Medium-R-Normal--9-90-75-75-C-60-ISO10646-1
-  Copyright: Public domain font.  Share and enjoy.
-  Capital A Height: 6, '1' Height: 6
-  Calculated Max Values w= 6 h= 9 x= 2 y= 7 dx= 6 dy= 0 ascent= 7 len= 9
-  Font Bounding box     w= 6 h= 9 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-2 dx= 0 dy= 0
-  Pure Font   ascent = 6 descent=-2
-  X Font      ascent = 6 descent=-2
-  Max Font    ascent = 7 descent=-2
-*/
-#include <utility/u8g.h>
-const u8g_fntpgm_uint8_t u8g_font_6x9[2300] U8G_SECTION(".progmem.u8g_font_6x9") = {
-  0,6,9,0,254,6,1,137,2,254,32,255,254,7,254,6,
-  254,0,0,0,6,0,7,1,6,6,6,2,0,128,128,128,
-  128,0,128,3,3,3,6,1,3,160,160,160,5,7,7,6,
-  0,255,80,80,248,80,248,80,80,5,9,9,6,0,254,32,
-  112,168,160,112,40,168,112,32,6,8,8,6,0,255,64,168,
-  72,16,32,72,84,8,5,7,7,6,0,255,96,144,144,96,
-  152,144,104,1,3,3,6,2,3,128,128,128,2,7,7,6,
-  2,255,64,128,128,128,128,128,64,2,7,7,6,2,255,128,
-  64,64,64,64,64,128,5,5,5,6,0,0,136,80,248,80,
-  136,5,5,5,6,0,0,32,32,248,32,32,2,4,4,6,
-  2,254,192,64,64,128,5,1,1,6,0,2,248,2,2,2,
-  6,2,0,192,192,4,6,6,6,1,0,16,16,32,64,128,
-  128,4,6,6,6,1,0,96,144,144,144,144,96,3,6,6,
-  6,1,0,64,192,64,64,64,224,4,6,6,6,1,0,96,
-  144,16,32,64,240,4,6,6,6,1,0,240,32,96,16,16,
-  224,5,6,6,6,0,0,16,48,80,144,248,16,4,6,6,
-  6,1,0,240,128,224,16,16,224,4,6,6,6,1,0,96,
-  128,224,144,144,96,4,6,6,6,1,0,240,16,16,32,64,
-  64,4,6,6,6,1,0,96,144,96,144,144,96,4,6,6,
-  6,1,0,96,144,144,112,16,96,2,5,5,6,2,0,192,
-  192,0,192,192,2,7,7,6,2,254,192,192,0,192,64,64,
-  128,5,5,5,6,0,0,24,96,128,96,24,5,3,3,6,
-  0,1,248,0,248,5,5,5,6,0,0,192,48,8,48,192,
-  4,7,7,6,1,0,96,144,16,96,64,0,64,5,6,6,
-  6,0,0,112,144,168,176,128,112,5,6,6,6,0,0,32,
-  80,136,248,136,136,5,6,6,6,0,0,240,136,240,136,136,
-  240,4,6,6,6,1,0,96,144,128,128,144,96,4,6,6,
-  6,1,0,224,144,144,144,144,224,4,6,6,6,1,0,240,
-  128,224,128,128,240,4,6,6,6,1,0,240,128,224,128,128,
-  128,4,6,6,6,1,0,96,144,128,176,144,96,4,6,6,
-  6,1,0,144,144,240,144,144,144,3,6,6,6,1,0,224,
-  64,64,64,64,224,5,6,6,6,0,0,56,16,16,16,144,
-  96,4,6,6,6,1,0,144,160,192,160,144,144,4,6,6,
-  6,1,0,128,128,128,128,128,240,5,6,6,6,0,0,136,
-  216,168,168,136,136,4,6,6,6,1,0,144,208,176,144,144,
-  144,5,6,6,6,0,0,112,136,136,136,136,112,4,6,6,
-  6,1,0,224,144,144,224,128,128,4,7,7,6,1,255,96,
-  144,144,208,176,96,16,4,6,6,6,1,0,224,144,144,224,
-  144,144,4,6,6,6,1,0,96,144,64,32,144,96,5,6,
-  6,6,0,0,248,32,32,32,32,32,4,6,6,6,1,0,
-  144,144,144,144,144,96,4,6,6,6,1,0,144,144,144,240,
-  96,96,5,6,6,6,0,0,136,136,168,168,216,136,5,6,
-  6,6,0,0,136,80,32,32,80,136,5,6,6,6,0,0,
-  136,136,80,32,32,32,4,6,6,6,1,0,240,16,32,64,
-  128,240,3,6,6,6,1,0,224,128,128,128,128,224,4,6,
-  6,6,1,0,128,128,64,32,16,16,3,6,6,6,1,0,
-  224,32,32,32,32,224,5,3,3,6,0,3,32,80,136,5,
-  1,1,6,0,254,248,2,2,2,6,2,4,128,64,4,4,
-  4,6,1,0,112,144,144,112,4,6,6,6,1,0,128,128,
-  224,144,144,224,4,4,4,6,1,0,112,128,128,112,4,6,
-  6,6,1,0,16,16,112,144,144,112,4,4,4,6,1,0,
-  96,176,192,112,4,6,6,6,1,0,32,80,64,224,64,64,
-  4,6,6,6,1,254,96,144,144,112,16,96,4,6,6,6,
-  1,0,128,128,224,144,144,144,3,6,6,6,1,0,64,0,
-  192,64,64,224,3,8,8,6,1,254,32,0,96,32,32,32,
-  160,64,4,6,6,6,1,0,128,128,160,192,160,144,3,6,
-  6,6,1,0,192,64,64,64,64,224,5,4,4,6,0,0,
-  208,168,168,136,4,4,4,6,1,0,224,144,144,144,4,4,
-  4,6,1,0,96,144,144,96,4,6,6,6,1,254,224,144,
-  144,224,128,128,4,6,6,6,1,254,112,144,144,112,16,16,
-  4,4,4,6,1,0,160,208,128,128,4,4,4,6,1,0,
-  112,192,48,224,4,6,6,6,1,0,64,64,224,64,80,32,
-  4,4,4,6,1,0,144,144,144,112,4,4,4,6,1,0,
-  144,144,96,96,5,4,4,6,0,0,136,168,168,80,4,4,
-  4,6,1,0,144,96,96,144,4,6,6,6,1,254,144,144,
-  144,112,144,96,4,4,4,6,1,0,240,32,64,240,3,7,
-  7,6,1,0,32,64,64,128,64,64,32,1,7,7,6,2,
-  255,128,128,128,128,128,128,128,3,7,7,6,1,0,128,64,
-  64,32,64,64,128,4,2,2,6,1,3,80,160,255,255,255,
-  255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,
-  255,255,255,255,255,255,255,255,255,255,255,255,255,255,0,0,
-  0,6,0,7,1,6,6,6,2,0,128,0,128,128,128,128,
-  4,6,6,6,1,255,32,112,160,160,112,32,5,7,7,6,
-  0,255,48,72,64,240,64,64,248,5,5,5,6,0,0,168,
-  80,136,80,168,5,6,6,6,0,0,136,80,248,32,248,32,
-  1,7,7,6,2,255,128,128,128,0,128,128,128,4,7,7,
-  6,1,255,112,128,96,144,96,16,224,3,1,1,6,1,5,
-  160,6,7,7,6,0,0,120,132,148,164,148,132,120,3,5,
-  5,6,1,1,96,160,96,0,224,5,5,5,6,0,0,40,
-  80,160,80,40,4,3,3,6,1,0,240,16,16,4,1,1,
-  6,1,2,240,6,7,7,6,0,0,120,132,180,164,164,132,
-  120,4,1,1,6,1,5,240,4,3,3,6,1,2,96,144,
-  96,5,7,7,6,0,255,32,32,248,32,32,0,248,3,5,
-  5,6,1,1,64,160,32,64,224,3,5,5,6,1,1,192,
-  32,64,32,192,2,2,2,6,2,4,64,128,4,5,5,6,
-  1,255,144,144,176,208,128,5,6,6,6,0,0,120,232,232,
-  104,40,40,1,1,1,6,2,2,128,2,2,2,6,2,254,
-  64,128,3,5,5,6,1,1,64,192,64,64,224,3,5,5,
-  6,1,1,64,160,64,0,224,5,5,5,6,0,0,160,80,
-  40,80,160,5,8,8,6,0,255,64,192,64,80,112,48,120,
-  16,5,8,8,6,0,255,64,192,64,80,104,8,16,56,5,
-  8,8,6,0,255,192,32,64,48,240,48,120,16,4,7,7,
-  6,1,0,32,0,32,96,128,144,96,5,7,7,6,0,0,
-  64,32,32,80,112,136,136,5,7,7,6,0,0,16,32,32,
-  80,112,136,136,5,7,7,6,0,0,32,80,32,80,112,136,
-  136,5,7,7,6,0,0,40,80,32,80,112,136,136,5,7,
-  7,6,0,0,80,0,32,80,112,136,136,5,7,7,6,0,
-  0,32,80,32,80,112,136,136,5,6,6,6,0,0,120,160,
-  240,160,160,184,4,8,8,6,1,254,96,144,128,128,144,96,
-  32,64,4,7,7,6,1,0,64,32,240,128,224,128,240,4,
-  7,7,6,1,0,32,64,240,128,224,128,240,4,7,7,6,
-  1,0,32,80,240,128,224,128,240,4,7,7,6,1,0,80,
-  0,240,128,224,128,240,3,7,7,6,1,0,128,64,224,64,
-  64,64,224,3,7,7,6,1,0,32,64,224,64,64,64,224,
-  3,7,7,6,1,0,64,160,224,64,64,64,224,3,7,7,
-  6,1,0,160,0,224,64,64,64,224,5,6,6,6,0,0,
-  112,72,232,72,72,112,4,7,7,6,1,0,80,160,144,208,
-  176,144,144,4,7,7,6,1,0,64,32,96,144,144,144,96,
-  4,7,7,6,1,0,32,64,96,144,144,144,96,4,7,7,
-  6,1,0,32,80,96,144,144,144,96,4,7,7,6,1,0,
-  80,160,96,144,144,144,96,4,7,7,6,1,0,80,0,96,
-  144,144,144,96,5,5,5,6,0,0,136,80,32,80,136,4,
-  8,8,6,1,255,16,112,176,176,208,208,224,128,4,7,7,
-  6,1,0,64,32,144,144,144,144,96,4,7,7,6,1,0,
-  32,64,144,144,144,144,96,4,7,7,6,1,0,32,80,144,
-  144,144,144,96,4,7,7,6,1,0,80,0,144,144,144,144,
-  96,5,7,7,6,0,0,16,32,136,80,32,32,32,4,6,
-  6,6,1,0,128,224,144,144,224,128,4,6,6,6,1,0,
-  96,144,160,160,144,160,4,7,7,6,1,0,64,32,0,112,
-  144,144,112,4,7,7,6,1,0,32,64,0,112,144,144,112,
-  4,7,7,6,1,0,32,80,0,112,144,144,112,4,7,7,
-  6,1,0,80,160,0,112,144,144,112,4,6,6,6,1,0,
-  80,0,112,144,144,112,4,7,7,6,1,0,32,80,32,112,
-  144,144,112,5,4,4,6,0,0,112,168,176,120,4,6,6,
-  6,1,254,112,128,128,112,32,64,4,7,7,6,1,0,64,
-  32,0,96,176,192,112,4,7,7,6,1,0,32,64,0,96,
-  176,192,112,4,7,7,6,1,0,32,80,0,96,176,192,112,
-  4,6,6,6,1,0,80,0,96,176,192,112,3,7,7,6,
-  1,0,128,64,0,192,64,64,224,3,7,7,6,1,0,32,
-  64,0,192,64,64,224,3,7,7,6,1,0,64,160,0,192,
-  64,64,224,3,6,6,6,1,0,160,0,192,64,64,224,4,
-  7,7,6,1,0,48,96,16,112,144,144,96,4,7,7,6,
-  1,0,80,160,0,224,144,144,144,4,7,7,6,1,0,64,
-  32,0,96,144,144,96,4,7,7,6,1,0,32,64,0,96,
-  144,144,96,4,7,7,6,1,0,32,80,0,96,144,144,96,
-  4,7,7,6,1,0,80,160,0,96,144,144,96,4,6,6,
-  6,1,0,80,0,96,144,144,96,5,5,5,6,0,0,32,
-  0,248,0,32,4,4,4,6,1,0,112,176,208,224,4,7,
-  7,6,1,0,64,32,0,144,144,144,112,4,7,7,6,1,
-  0,32,64,0,144,144,144,112,4,7,7,6,1,0,32,80,
-  0,144,144,144,112,4,6,6,6,1,0,80,0,144,144,144,
-  112,4,9,9,6,1,254,32,64,0,144,144,144,112,144,96,
-  4,8,8,6,1,254,128,128,224,144,144,224,128,128,4,8,
-  8,6,1,254,80,0,144,144,144,112,144,96};
-
-// STB Marlin
-/*
-  Fontname: u8g_font_6x10_marlin
-  Copyright: Public domain terminal emulator font.  Share and enjoy.
-  Capital A Height: 7, '1' Height: 7
-  Calculated Max Values w= 6 h=10 x= 2 y= 7 dx= 6 dy= 0 ascent= 8 len=10
-  Font Bounding box     w= 6 h= 9 x= 0 y=-2
-  Calculated Min Values           x= 0 y=-2 dx= 0 dy= 0
-  Pure Font   ascent = 7 descent=-2
-  X Font      ascent = 7 descent=-2
-  Max Font    ascent = 8 descent=-2
-*/
-#include <utility/u8g.h>
-const u8g_fntpgm_uint8_t u8g_font_6x10_marlin[2617] U8G_SECTION(".progmem.u8g_font_6x10_marlin") = {
-  0,6,9,0,254,7,1,153,3,43,32,255,254,8,254,7,
-  254,0,0,0,6,0,0,1,7,7,6,2,0,128,128,128,
-  128,128,0,128,3,3,3,6,1,4,160,160,160,5,7,7,
-  6,0,0,80,80,248,80,248,80,80,5,7,7,6,0,0,
-  32,112,160,112,40,112,32,5,7,7,6,0,0,72,168,80,
-  32,80,168,144,5,7,7,6,0,0,64,160,160,64,168,144,
-  104,1,3,3,6,2,4,128,128,128,3,7,7,6,1,0,
-  32,64,128,128,128,64,32,3,7,7,6,1,0,128,64,32,
-  32,32,64,128,5,5,5,6,0,1,136,80,248,80,136,5,
-  5,5,6,0,1,32,32,248,32,32,3,3,3,6,1,255,
-  96,64,128,5,1,1,6,0,3,248,3,3,3,6,1,255,
-  64,224,64,5,7,7,6,0,0,8,8,16,32,64,128,128,
-  5,7,7,6,0,0,32,80,136,136,136,80,32,5,7,7,
-  6,0,0,32,96,160,32,32,32,248,5,7,7,6,0,0,
-  112,136,8,48,64,128,248,5,7,7,6,0,0,248,8,16,
-  48,8,136,112,5,7,7,6,0,0,16,48,80,144,248,16,
-  16,5,7,7,6,0,0,248,128,176,200,8,136,112,5,7,
-  7,6,0,0,48,64,128,176,200,136,112,5,7,7,6,0,
-  0,248,8,16,16,32,64,64,5,7,7,6,0,0,112,136,
-  136,112,136,136,112,5,7,7,6,0,0,112,136,152,104,8,
-  16,96,3,7,7,6,1,255,64,224,64,0,64,224,64,3,
-  7,7,6,1,255,64,224,64,0,96,64,128,4,7,7,6,
-  1,0,16,32,64,128,64,32,16,5,3,3,6,0,2,248,
-  0,248,4,7,7,6,1,0,128,64,32,16,32,64,128,5,
-  7,7,6,0,0,112,136,16,32,32,0,32,5,7,7,6,
-  0,0,112,136,152,168,176,128,112,5,7,7,6,0,0,32,
-  80,136,136,248,136,136,5,7,7,6,0,0,240,72,72,112,
-  72,72,240,5,7,7,6,0,0,112,136,128,128,128,136,112,
-  5,7,7,6,0,0,240,72,72,72,72,72,240,5,7,7,
-  6,0,0,248,128,128,240,128,128,248,5,7,7,6,0,0,
-  248,128,128,240,128,128,128,5,7,7,6,0,0,112,136,128,
-  128,152,136,112,5,7,7,6,0,0,136,136,136,248,136,136,
-  136,3,7,7,6,1,0,224,64,64,64,64,64,224,5,7,
-  7,6,0,0,56,16,16,16,16,144,96,5,7,7,6,0,
-  0,136,144,160,192,160,144,136,5,7,7,6,0,0,128,128,
-  128,128,128,128,248,5,7,7,6,0,0,136,136,216,168,136,
-  136,136,5,7,7,6,0,0,136,136,200,168,152,136,136,5,
-  7,7,6,0,0,112,136,136,136,136,136,112,5,7,7,6,
-  0,0,240,136,136,240,128,128,128,5,8,8,6,0,255,112,
-  136,136,136,136,168,112,8,5,7,7,6,0,0,240,136,136,
-  240,160,144,136,5,7,7,6,0,0,112,136,128,112,8,136,
-  112,5,7,7,6,0,0,248,32,32,32,32,32,32,5,7,
-  7,6,0,0,136,136,136,136,136,136,112,5,7,7,6,0,
-  0,136,136,136,80,80,80,32,5,7,7,6,0,0,136,136,
-  136,168,168,216,136,5,7,7,6,0,0,136,136,80,32,80,
-  136,136,5,7,7,6,0,0,136,136,80,32,32,32,32,5,
-  7,7,6,0,0,248,8,16,32,64,128,248,3,7,7,6,
-  1,0,224,128,128,128,128,128,224,5,7,7,6,0,0,128,
-  128,64,32,16,8,8,3,7,7,6,1,0,224,32,32,32,
-  32,32,224,5,3,3,6,0,4,32,80,136,5,1,1,6,
-  0,255,248,2,2,2,6,2,6,128,64,5,5,5,6,0,
-  0,112,8,120,136,120,5,7,7,6,0,0,128,128,176,200,
-  136,200,176,5,5,5,6,0,0,112,136,128,136,112,5,7,
-  7,6,0,0,8,8,104,152,136,152,104,5,5,5,6,0,
-  0,112,136,248,128,112,5,7,7,6,0,0,48,72,64,240,
-  64,64,64,5,7,7,6,0,254,120,136,136,120,8,136,112,
-  5,7,7,6,0,0,128,128,176,200,136,136,136,3,7,7,
-  6,1,0,64,0,192,64,64,64,224,4,9,9,6,1,254,
-  16,0,48,16,16,16,144,144,96,5,7,7,6,0,0,128,
-  128,136,144,224,144,136,3,7,7,6,1,0,192,64,64,64,
-  64,64,224,5,5,5,6,0,0,208,168,168,168,136,5,5,
-  5,6,0,0,176,200,136,136,136,5,5,5,6,0,0,112,
-  136,136,136,112,5,7,7,6,0,254,176,200,136,200,176,128,
-  128,5,7,7,6,0,254,104,152,136,152,104,8,8,5,5,
-  5,6,0,0,176,200,128,128,128,5,5,5,6,0,0,112,
-  128,112,8,240,5,7,7,6,0,0,64,64,240,64,64,72,
-  48,5,5,5,6,0,0,136,136,136,152,104,5,5,5,6,
-  0,0,136,136,80,80,32,5,5,5,6,0,0,136,136,168,
-  168,80,5,5,5,6,0,0,136,80,32,80,136,5,7,7,
-  6,0,254,136,136,152,104,8,136,112,5,5,5,6,0,0,
-  248,16,32,64,248,4,7,7,6,1,0,48,64,32,192,32,
-  64,48,1,7,7,6,2,0,128,128,128,128,128,128,128,4,
-  7,7,6,1,0,192,32,64,48,64,32,192,5,3,3,6,
-  0,4,72,168,144,0,0,0,1,0,0,0,0,0,1,0,
-  0,0,0,0,1,0,0,0,0,0,1,0,0,0,0,0,
-  1,0,0,0,0,0,1,0,0,0,0,0,1,0,0,0,
-  0,0,1,0,0,0,0,0,1,0,0,0,0,0,1,0,
-  0,0,0,0,1,0,0,0,0,0,1,0,0,0,0,0,
-  1,0,0,0,0,0,1,0,0,0,0,0,1,0,0,0,
-  0,0,1,0,0,0,0,0,1,0,0,0,0,0,1,0,
-  0,0,0,0,1,0,0,0,0,0,1,0,0,0,0,0,
-  1,0,0,0,0,0,1,0,0,0,0,0,1,0,0,0,
-  0,0,1,0,0,0,0,0,1,0,0,0,0,0,1,0,
-  0,0,0,0,1,0,0,0,0,0,1,0,0,0,0,0,
-  1,0,0,0,0,0,1,0,0,0,0,0,1,0,0,0,
-  0,0,1,0,0,0,0,0,1,0,0,0,0,0,6,0,
-  0,1,7,7,6,2,0,128,0,128,128,128,128,128,5,7,
-  7,6,0,255,32,120,160,160,160,120,32,5,7,7,6,0,
-  0,48,72,64,224,64,72,176,5,5,5,6,0,0,136,112,
-  80,112,136,5,8,8,6,0,255,136,136,80,32,248,32,32,
-  32,1,7,7,6,2,0,128,128,128,0,128,128,128,5,8,
-  8,6,0,255,112,128,224,144,72,56,8,112,3,1,1,6,
-  1,7,160,5,7,7,6,0,0,112,136,168,200,168,136,112,
-  4,6,6,6,1,1,112,144,176,80,0,240,6,5,5,6,
-  0,0,36,72,144,72,36,4,2,2,6,1,2,240,16,4,
-  1,1,6,1,3,240,5,7,7,6,0,0,112,136,232,200,
-  200,136,112,5,1,1,6,0,7,248,3,3,3,6,1,4,
-  64,160,64,5,6,6,6,0,0,32,32,248,32,32,248,4,
-  5,5,6,1,3,96,144,32,64,240,4,5,5,6,1,3,
-  224,16,96,16,224,2,2,2,6,2,6,64,128,5,6,6,
-  6,0,255,136,136,136,200,176,128,5,7,7,6,0,0,120,
-  232,232,104,40,40,40,1,1,1,6,2,3,128,2,2,2,
-  6,2,254,64,128,3,5,5,6,1,3,64,192,64,64,224,
-  4,6,6,6,1,1,96,144,144,96,0,240,6,5,5,6,
-  0,0,144,72,36,72,144,6,9,9,6,0,255,64,192,64,
-  64,228,12,20,60,4,6,9,9,6,0,255,64,192,64,64,
-  232,20,4,8,28,5,9,9,6,0,255,192,32,64,32,200,
-  24,40,120,8,5,7,7,6,0,0,32,0,32,32,64,136,
-  112,5,8,8,6,0,0,64,32,112,136,136,248,136,136,5,
-  8,8,6,0,0,16,32,112,136,136,248,136,136,5,8,8,
-  6,0,0,32,80,112,136,136,248,136,136,5,8,8,6,0,
-  0,72,176,112,136,136,248,136,136,5,8,8,6,0,0,80,
-  0,112,136,136,248,136,136,5,8,8,6,0,0,32,80,112,
-  136,136,248,136,136,6,7,7,6,0,0,60,80,144,156,240,
-  144,156,5,9,9,6,0,254,112,136,128,128,128,136,112,32,
-  64,5,8,8,6,0,0,64,248,128,128,240,128,128,248,5,
-  8,8,6,0,0,16,248,128,128,240,128,128,248,5,8,8,
-  6,0,0,32,248,128,128,240,128,128,248,5,8,8,6,0,
-  0,80,248,128,128,240,128,128,248,3,8,8,6,1,0,128,
-  64,224,64,64,64,64,224,3,8,8,6,1,0,32,64,224,
-  64,64,64,64,224,3,8,8,6,1,0,64,160,224,64,64,
-  64,64,224,3,8,8,6,1,0,160,0,224,64,64,64,64,
-  224,5,7,7,6,0,0,240,72,72,232,72,72,240,5,8,
-  8,6,0,0,40,80,136,200,168,152,136,136,5,8,8,6,
-  0,0,64,32,112,136,136,136,136,112,5,8,8,6,0,0,
-  16,32,112,136,136,136,136,112,5,8,8,6,0,0,32,80,
-  112,136,136,136,136,112,5,8,8,6,0,0,40,80,112,136,
-  136,136,136,112,5,8,8,6,0,0,80,0,112,136,136,136,
-  136,112,5,5,5,6,0,0,136,80,32,80,136,5,7,7,
-  6,0,0,112,152,152,168,200,200,112,5,8,8,6,0,0,
-  64,32,136,136,136,136,136,112,5,8,8,6,0,0,16,32,
-  136,136,136,136,136,112,5,8,8,6,0,0,32,80,0,136,
-  136,136,136,112,5,8,8,6,0,0,80,0,136,136,136,136,
-  136,112,5,8,8,6,0,0,16,32,136,136,80,32,32,32,
-  5,7,7,6,0,0,128,240,136,240,128,128,128,5,7,7,
-  6,0,0,112,136,144,160,144,136,176,5,8,8,6,0,0,
-  64,32,0,112,8,120,136,120,5,8,8,6,0,0,16,32,
-  0,112,8,120,136,120,5,8,8,6,0,0,32,80,0,112,
-  8,120,136,120,5,8,8,6,0,0,40,80,0,112,8,120,
-  136,120,5,7,7,6,0,0,80,0,112,8,120,136,120,5,
-  8,8,6,0,0,32,80,32,112,8,120,136,120,6,5,5,
-  6,0,0,120,20,124,144,124,5,7,7,6,0,254,112,136,
-  128,136,112,32,64,5,8,8,6,0,0,64,32,0,112,136,
-  248,128,112,5,8,8,6,0,0,16,32,0,112,136,248,128,
-  112,5,8,8,6,0,0,32,80,0,112,136,248,128,112,5,
-  7,7,6,0,0,80,0,112,136,248,128,112,3,8,8,6,
-  1,0,128,64,0,192,64,64,64,224,3,8,8,6,1,0,
-  64,128,0,192,64,64,64,224,3,8,8,6,1,0,64,160,
-  0,192,64,64,64,224,6,10,10,6,0,254,164,168,0,252,
-  132,128,128,128,132,252,6,10,10,6,0,254,84,148,0,252,
-  132,4,4,4,132,252,5,8,8,6,0,0,40,80,0,176,
-  200,136,136,136,5,8,8,6,0,0,64,32,0,112,136,136,
-  136,112,4,10,10,6,2,254,48,64,128,144,144,144,144,144,
-  144,144,4,10,10,6,0,254,192,32,16,144,144,144,144,144,
-  144,144,6,7,7,6,0,1,68,140,140,132,128,64,60,6,
-  7,7,6,0,1,136,196,196,132,4,8,240,5,5,5,6,
-  0,1,32,0,248,0,32,5,8,8,6,0,0,64,240,200,
-  136,136,152,120,16,5,8,8,6,0,0,224,248,136,136,136,
-  136,136,248,5,5,5,6,0,1,32,48,248,48,32,5,8,
-  8,6,0,0,32,112,248,32,32,32,32,224,5,9,9,6,
-  0,255,32,112,168,168,184,136,136,80,32,5,9,9,6,0,
-  255,224,128,192,176,168,168,48,40,40,5,9,9,6,0,255,
-  248,168,136,136,136,136,136,168,248,5,10,10,6,0,254,32,
-  80,80,80,80,136,168,168,136,112};
-
-/*
-  Fontname: -Firefly-Firefly New Sung-Medium-R-Normal--11-110-75-75-P-109-ISO10646-1
-  Copyright: 
-  Capital A Height: 9, '1' Height: 9
-  Calculated Max Values w=11 h=11 x= 4 y= 6 dx=11 dy= 0 ascent=10 len=22
-  Font Bounding box     w=11 h=11 x= 0 y=-1
-  Calculated Min Values           x= 0 y=-1 dx= 0 dy= 0
-  Pure Font   ascent = 9 descent=-1
-  X Font      ascent = 9 descent=-1
-  Max Font    ascent =10 descent=-1
-  
-  Added By MakerLab.me for Chinese Support.
-*/
-
-#if LANGUAGE_CHOICE == 10
-
-#include "utility/u8g.h"
-
-const u8g_fntpgm_uint8_t chinese[3819] U8G_SECTION(".progmem.chinese") = {
-    0,11,11,0,255,9,1,207,3,158,32,255,255,10,255,9,
-  255,0,0,0,6,0,1,1,9,9,6,2,0,128,128,128,
-  128,128,128,0,0,128,5,3,3,6,0,6,216,72,144,6,
-  9,9,6,0,0,40,40,40,124,40,252,80,80,80,5,9,
-  9,6,0,0,32,112,168,160,112,40,168,112,32,6,10,10,
-  6,0,255,72,168,168,176,80,40,84,84,148,136,5,9,9,
-  6,0,0,32,80,80,80,96,168,144,144,104,2,3,3,6,
-  2,6,192,64,128,3,10,10,6,1,255,32,64,64,128,128,
-  128,128,64,64,32,3,10,10,6,1,255,128,64,64,32,32,
-  32,32,64,64,128,5,7,7,6,0,1,32,168,112,32,112,
-  168,32,5,7,7,6,0,1,32,32,32,248,32,32,32,2,
-  3,3,6,2,0,192,64,128,5,1,1,6,0,4,248,1,
-  2,2,6,2,0,128,128,5,10,10,6,0,255,8,8,16,
-  16,32,32,64,64,128,128,5,9,9,6,0,0,32,80,136,
-  136,136,136,136,80,32,3,9,9,6,1,0,64,192,64,64,
-  64,64,64,64,224,5,9,9,6,0,0,112,136,136,8,16,
-  32,64,136,248,5,9,9,6,0,0,112,136,8,8,48,8,
-  8,136,112,5,9,9,6,0,0,16,48,48,80,80,144,248,
-  16,56,5,9,9,6,0,0,120,64,64,64,112,8,8,136,
-  112,5,9,9,6,0,0,112,136,128,128,240,136,136,136,112,
-  5,9,9,6,0,0,248,136,8,16,16,32,32,32,32,5,
-  9,9,6,0,0,112,136,136,136,112,136,136,136,112,5,9,
-  9,6,0,0,112,136,136,136,120,8,8,136,112,1,7,7,
-  6,2,1,128,128,0,0,0,128,128,2,7,7,6,2,0,
-  192,192,0,0,192,64,128,5,10,10,6,0,255,8,16,32,
-  64,128,128,64,32,16,8,5,3,3,6,0,2,248,0,248,
-  5,10,10,6,0,255,128,64,32,16,8,8,16,32,64,128,
-  5,9,9,6,0,0,112,136,136,16,32,32,32,0,32,6,
-  10,10,6,0,255,48,72,180,212,212,212,212,168,128,120,5,
-  9,9,6,0,0,32,32,32,80,80,112,136,136,136,5,9,
-  9,6,0,0,240,136,136,136,240,136,136,136,240,5,9,9,
-  6,0,0,48,72,136,128,128,128,128,72,48,5,9,9,6,
-  0,0,224,144,136,136,136,136,136,144,224,5,9,9,6,0,
-  0,248,128,128,128,240,128,128,128,248,5,9,9,6,0,0,
-  248,128,128,128,240,128,128,128,128,5,9,9,6,0,0,48,
-  72,128,128,128,152,136,72,48,5,9,9,6,0,0,136,136,
-  136,136,248,136,136,136,136,3,9,9,6,1,0,224,64,64,
-  64,64,64,64,64,224,5,9,9,6,0,0,56,16,16,16,
-  16,16,16,144,96,5,9,9,6,0,0,136,136,144,160,224,
-  144,144,136,136,5,9,9,6,0,0,224,64,64,64,64,64,
-  64,72,248,5,9,9,6,0,0,136,136,216,216,168,168,168,
-  136,136,5,9,9,6,0,0,136,200,200,168,168,168,152,152,
-  136,5,9,9,6,0,0,112,136,136,136,136,136,136,136,112,
-  5,9,9,6,0,0,240,72,72,72,112,64,64,64,224,5,
-  9,9,6,0,0,112,136,136,136,136,232,152,112,8,5,9,
-  9,6,0,0,240,136,136,136,240,160,144,136,136,5,9,9,
-  6,0,0,112,136,136,128,112,8,136,136,112,5,9,9,6,
-  0,0,248,168,32,32,32,32,32,32,112,5,9,9,6,0,
-  0,136,136,136,136,136,136,136,136,112,5,9,9,6,0,0,
-  136,136,136,80,80,80,32,32,32,5,9,9,6,0,0,168,
-  168,168,168,248,80,80,80,80,5,9,9,6,0,0,136,136,
-  80,80,32,80,80,136,136,5,9,9,6,0,0,136,136,80,
-  80,32,32,32,32,32,5,9,9,6,0,0,248,136,16,16,
-  32,32,64,136,248,3,10,10,6,2,255,224,128,128,128,128,
-  128,128,128,128,224,5,10,10,6,0,255,128,128,64,64,32,
-  32,16,16,8,8,3,10,10,6,1,255,224,32,32,32,32,
-  32,32,32,32,224,5,3,3,6,0,6,32,80,136,5,1,
-  1,6,0,255,248,3,3,3,6,1,6,192,64,32,5,6,
-  6,6,0,0,224,16,112,144,144,104,5,9,9,6,0,0,
-  128,128,128,240,136,136,136,200,176,5,6,6,6,0,0,112,
-  136,128,128,136,112,5,9,9,6,0,0,8,8,8,120,136,
-  136,136,152,104,5,6,6,6,0,0,112,136,248,128,136,112,
-  5,9,9,6,0,0,48,72,64,240,64,64,64,64,224,5,
-  7,7,6,0,255,104,144,144,96,144,136,112,5,9,9,6,
-  0,0,128,128,128,176,200,136,136,136,136,3,9,9,6,1,
-  0,64,0,0,192,64,64,64,64,224,4,10,10,6,0,255,
-  16,0,0,48,16,16,16,16,144,96,5,9,9,6,0,0,
-  128,128,136,144,160,192,160,144,136,3,9,9,6,1,0,192,
-  64,64,64,64,64,64,64,224,5,6,6,6,0,0,208,168,
-  168,168,168,168,5,6,6,6,0,0,176,72,72,72,72,72,
-  5,6,6,6,0,0,112,136,136,136,136,112,5,7,7,6,
-  0,255,240,136,136,240,128,128,128,5,7,7,6,0,255,120,
-  136,136,136,120,8,8,5,6,6,6,0,0,208,104,64,64,
-  64,224,5,6,6,6,0,0,112,136,96,16,136,112,5,8,
-  8,6,0,0,64,64,240,64,64,64,72,48,5,6,6,6,
-  0,0,136,136,136,136,152,104,5,6,6,6,0,0,136,136,
-  80,80,32,32,5,6,6,6,0,0,168,168,168,80,80,80,
-  5,6,6,6,0,0,136,80,32,32,80,136,4,7,7,6,
-  1,255,144,144,80,80,32,32,192,5,6,6,6,0,0,248,
-  136,16,32,72,248,3,10,10,6,1,255,32,64,64,64,64,
-  128,64,64,64,32,1,11,11,6,2,255,128,128,128,128,128,
-  128,128,128,128,128,128,3,10,10,6,1,255,128,64,64,64,
-  64,32,64,64,64,128,4,2,2,6,1,4,80,160,10,10,
-  20,11,0,255,48,64,72,64,133,64,121,64,73,64,73,64,
-  89,64,64,64,68,64,61,192,10,10,20,11,0,255,4,0,
-  255,192,144,64,31,0,49,0,78,0,17,0,255,192,33,0,
-  63,0,9,10,20,11,1,255,8,0,255,128,160,128,24,0,
-  72,0,40,0,255,128,8,0,54,0,193,128,11,10,20,11,
-  0,255,113,0,99,0,164,192,175,128,240,0,18,64,89,128,
-  148,128,17,0,47,224,9,10,20,11,1,255,8,0,255,128,
-  128,128,127,0,34,0,125,0,8,0,127,0,8,0,255,128,
-  9,10,20,11,1,255,8,0,8,0,255,128,136,128,136,128,
-  255,128,136,128,8,0,8,0,8,0,10,10,20,11,0,255,
-  8,0,4,0,255,192,17,0,17,0,10,0,4,0,10,0,
-  49,192,192,128,9,10,20,11,1,255,8,0,255,128,8,0,
-  8,0,127,0,34,0,20,0,8,0,54,0,193,128,10,10,
-  20,11,0,255,33,0,39,192,241,0,47,192,48,128,111,192,
-  168,128,36,128,32,128,99,128,10,10,20,11,0,255,69,0,
-  47,192,9,0,25,0,47,192,41,0,207,192,73,0,73,0,
-  79,192,9,10,20,11,1,255,63,0,82,0,140,0,50,0,
-  193,128,127,0,73,0,127,0,73,0,127,0,10,10,20,11,
-  0,255,39,192,33,0,249,0,33,0,57,0,225,0,33,0,
-  41,0,231,0,66,0,10,10,20,11,0,255,123,192,66,64,
-  66,64,122,64,66,64,74,64,82,64,226,192,66,0,2,0,
-  9,10,20,11,1,255,16,0,255,128,16,0,47,128,97,0,
-  162,0,63,128,34,0,34,0,46,0,10,10,20,11,0,255,
-  97,0,87,192,65,64,247,192,81,0,83,192,86,64,91,192,
-  82,64,67,192,9,10,20,11,1,255,8,0,8,0,15,0,
-  8,0,255,128,8,0,12,0,10,0,9,0,8,0,9,10,
-  20,11,1,255,255,0,1,0,1,0,65,0,127,0,64,0,
-  64,0,64,128,64,128,63,128,10,10,20,11,0,255,33,192,
-  38,0,127,192,34,0,46,192,234,64,46,192,42,64,47,192,
-  104,64,9,10,20,11,1,255,48,0,8,0,8,0,8,0,
-  8,0,8,0,20,0,34,0,65,0,128,128,10,10,20,11,
-  1,255,69,0,68,0,255,128,72,0,105,0,205,0,86,0,
-  82,0,69,0,200,192,9,10,20,11,1,255,8,0,73,0,
-  73,0,73,0,127,0,8,0,136,128,136,128,136,128,255,128,
-  9,10,20,11,1,255,16,0,9,0,255,128,8,0,8,0,
-  127,0,8,0,8,0,9,0,255,128,10,10,20,11,0,255,
-  255,192,18,0,3,128,124,0,37,0,36,64,127,192,22,0,
-  37,128,68,64,9,10,20,11,1,255,34,0,20,0,127,0,
-  73,0,127,0,73,0,127,0,8,0,255,128,8,0,7,10,
-  10,11,2,255,48,32,254,130,254,130,254,130,254,130,10,10,
-  20,11,0,255,114,0,2,0,7,192,250,64,34,64,34,64,
-  66,64,74,64,252,64,9,128,9,10,20,11,1,255,255,128,
-  34,0,34,0,34,0,255,128,34,0,34,0,34,0,66,0,
-  130,0,10,10,20,11,0,255,33,0,34,0,252,64,87,192,
-  80,0,87,192,84,64,36,64,87,192,148,64,9,10,20,11,
-  1,255,34,0,20,0,127,0,8,0,8,0,255,128,8,0,
-  20,0,34,0,193,128,9,9,18,11,1,0,79,128,160,128,
-  132,128,190,128,140,128,148,128,164,128,196,128,129,128,10,10,
-  20,11,0,255,4,0,39,128,36,0,255,192,4,0,20,0,
-  36,128,65,0,6,0,120,0,10,10,20,11,0,255,68,128,
-  36,128,15,192,4,128,228,128,47,192,36,128,40,128,80,0,
-  143,192,11,10,20,11,0,255,119,192,84,0,86,0,165,128,
-  116,128,21,128,53,64,212,64,20,0,23,224,9,10,20,11,
-  1,255,255,128,128,128,190,128,162,128,162,128,190,128,162,128,
-  128,128,255,128,128,128,10,10,20,11,0,255,127,192,68,0,
-  95,128,80,128,95,128,80,128,95,128,85,0,164,128,204,64,
-  9,10,20,11,1,255,8,0,15,128,8,0,127,0,66,0,
-  66,0,126,0,0,0,144,128,18,0,10,10,20,11,1,255,
-  143,0,73,0,9,0,193,192,95,0,73,0,70,0,66,0,
-  77,0,16,192,10,10,20,11,0,255,4,0,127,192,64,64,
-  63,128,4,0,36,0,39,128,36,0,84,0,143,192,10,10,
-  20,11,0,255,119,192,18,0,39,192,157,64,117,64,37,64,
-  37,64,38,0,34,64,44,0,10,10,20,11,0,255,34,0,
-  250,0,39,128,50,128,230,128,35,192,100,64,18,128,73,64,
-  137,64,10,10,20,11,0,255,231,192,164,128,171,0,196,192,
-  169,0,175,192,165,0,239,192,129,0,129,0,10,10,20,11,
-  0,255,79,128,40,128,143,128,88,128,47,128,192,0,95,192,
-  85,64,85,64,127,192,10,10,20,11,0,255,8,0,255,128,
-  136,128,255,128,136,128,255,128,136,128,8,0,8,64,7,192,
-  10,10,20,11,0,255,95,192,49,0,151,192,84,64,55,192,
-  52,64,215,192,81,0,85,128,107,64,10,10,20,11,1,255,
-  66,0,95,128,234,0,70,0,77,192,217,0,73,0,73,0,
-  73,0,17,0,10,10,20,11,0,255,20,0,84,0,87,192,
-  84,128,92,128,82,128,114,128,209,0,18,128,20,64,10,10,
-  20,11,0,255,26,0,227,192,36,64,250,128,39,0,49,192,
-  110,64,162,128,33,0,46,0,10,10,20,11,0,255,1,0,
-  241,0,71,192,165,64,253,64,39,192,53,64,229,64,39,192,
-  36,64,10,10,20,11,0,255,130,0,95,192,2,0,15,128,
-  234,128,47,128,38,0,42,128,82,64,143,192,10,10,20,11,
-  0,255,4,0,127,192,73,0,127,192,73,0,95,128,73,0,
-  70,0,137,0,176,192,9,10,20,11,1,255,36,0,20,0,
-  68,0,36,0,4,0,255,128,8,0,20,0,34,0,193,128,
-  10,10,20,11,0,255,4,0,127,192,66,0,127,192,66,0,
-  75,0,82,128,82,128,162,64,162,64,10,10,20,11,0,255,
-  127,128,64,128,82,128,74,128,68,128,68,128,74,128,82,128,
-  64,128,128,64,9,9,18,11,1,255,127,128,127,128,64,0,
-  123,128,106,128,72,128,138,128,236,128,25,128,10,10,20,11,
-  0,255,34,0,47,192,248,64,37,0,40,128,112,64,175,128,
-  34,0,162,0,95,192,10,10,20,11,0,255,80,64,125,64,
-  145,64,127,64,17,64,125,64,85,64,84,64,92,64,17,192,
-  10,10,20,11,0,255,63,128,32,128,63,128,32,128,255,192,
-  72,0,123,192,74,64,253,128,10,64,9,10,20,11,1,255,
-  8,0,8,0,255,128,8,0,8,0,8,0,20,0,34,0,
-  65,0,128,128,10,10,20,11,0,255,4,0,4,0,4,0,
-  21,0,36,128,68,64,132,64,36,0,28,0,8,0,9,10,
-  20,11,1,255,255,128,136,128,136,128,255,128,136,128,136,128,
-  148,128,162,128,255,128,128,128,10,10,20,11,1,255,162,0,
-  52,0,251,192,180,128,4,128,243,0,83,0,113,0,34,128,
-  204,0,10,10,20,11,0,255,34,0,63,192,32,0,111,128,
-  160,0,47,128,32,0,47,128,40,128,47,128,10,10,20,11,
-  0,255,8,0,63,128,32,128,63,128,32,128,63,128,32,128,
-  63,128,84,128,159,64,9,10,20,11,1,255,127,0,73,0,
-  127,0,73,0,127,0,34,0,83,0,146,128,34,0,66,0,
-  10,10,20,11,0,255,255,192,8,0,127,128,82,128,94,128,
-  82,128,94,128,82,128,127,128,64,128,9,10,20,11,1,255,
-  127,0,8,0,8,0,255,128,20,0,20,0,20,0,36,128,
-  68,128,131,128,10,10,20,11,0,255,32,0,35,192,250,64,
-  42,64,42,64,42,64,42,64,42,64,75,192,146,64,10,11,
-  22,11,0,255,32,0,63,192,32,0,95,128,148,128,18,128,
-  255,192,36,128,63,192,0,128,3,0,10,10,20,11,0,255,
-  79,128,32,0,0,0,31,192,226,0,36,128,41,192,62,64,
-  80,0,143,192,10,10,20,11,0,255,47,128,40,128,40,128,
-  111,128,162,0,63,192,34,0,39,0,42,128,50,64,9,10,
-  20,11,1,255,34,0,127,0,17,0,255,128,42,0,209,128,
-  36,0,25,0,2,0,124,0,9,10,20,11,1,255,35,0,
-  250,128,255,128,66,0,250,128,171,0,249,0,41,0,243,128,
-  36,0,10,10,20,11,0,255,34,0,47,192,178,0,165,0,
-  169,64,53,128,37,0,35,0,36,128,40,64,9,10,20,11,
-  1,255,63,128,97,0,191,0,33,0,63,0,16,0,63,0,
-  82,0,140,0,115,128,10,10,20,11,0,255,127,192,64,0,
-  64,0,64,0,64,0,64,0,64,0,64,0,128,0,128,0,
-  10,10,20,11,0,255,124,64,69,64,125,64,81,64,125,64,
-  85,64,85,64,84,64,156,64,144,192,10,10,20,11,0,255,
-  35,192,250,0,82,0,251,192,34,128,250,128,34,128,114,128,
-  172,128,96,128,9,10,20,11,1,255,95,128,18,128,31,128,
-  210,128,87,128,87,128,117,128,87,128,32,128,1,128,10,10,
-  20,11,0,255,255,0,85,192,125,64,88,128,149,64,127,192,
-  4,0,39,128,36,0,255,192,11,10,20,11,0,255,251,192,
-  82,0,123,224,36,128,244,128,63,0,32,128,63,128,32,128,
-  63,128,10,10,20,11,0,255,34,0,47,192,32,0,103,128,
-  164,128,47,192,48,64,47,128,33,0,35,0,9,10,20,11,
-  1,255,82,0,186,128,182,0,223,128,146,0,211,0,30,128,
-  90,0,146,0,31,128,10,11,22,11,1,255,66,0,143,128,
-  162,0,191,192,200,128,134,0,170,0,223,192,20,0,231,128,
-  24,0,10,10,20,11,0,255,4,0,4,0,4,0,36,0,
-  39,128,36,0,36,0,36,0,36,128,255,192,9,10,20,11,
-  1,255,8,0,8,0,255,128,136,128,136,128,255,128,136,128,
-  136,128,255,128,128,128,10,10,20,11,0,255,18,0,18,0,
-  47,192,98,0,162,0,39,0,42,128,50,64,34,0,34,0,
-  10,10,20,11,1,255,239,128,168,128,175,128,234,128,170,0,
-  239,192,170,0,233,0,168,192,0,64,255,255,255,255,255,255,
-  255,255,255,255,6,10,10,11,3,0,32,16,0,0,120,136,
-  136,136,136,124,6,9,9,11,2,1,32,0,0,112,136,136,
-  136,136,124,255,255,255,255,255,255,5,10,10,11,3,0,64,
-  48,0,0,112,136,248,128,136,112,5,10,10,11,3,0,16,
-  32,0,0,112,136,248,128,136,112,5,9,9,11,3,1,112,
-  8,0,112,136,248,128,136,112,255,3,10,10,11,4,0,128,
-  64,0,0,192,64,64,64,64,224,3,10,10,11,4,0,64,
-  128,0,0,192,64,64,64,64,224,255,255,255,255,5,9,9,
-  11,3,0,64,32,0,112,136,136,136,136,112,5,10,10,11,
-  3,0,16,32,0,0,112,136,136,136,136,112,255,255,255,8,
-  7,7,11,1,1,24,24,0,255,0,24,24,255,6,9,9,
-  11,2,0,32,16,0,204,68,68,68,76,52,11,3,6,11,
-  0,3,0,128,255,224,0,192,3,11,11,11,4,255,64,64,
-  224,64,64,64,64,64,64,64,64,6,9,9,11,2,0,68,
-  0,0,204,68,68,68,76,52,255,255,255
-};
-
-#endif //LANGUAGE_CHOICE == 10
-  

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/dogm_lcd_implementation.h

@@ -1,648 +0,0 @@
-/**
- *dogm_lcd_implementation.h
- *
- *Graphics LCD implementation for 128x64 pixel LCDs by STB for ErikZalm/Marlin
- *Demonstrator: http://www.reprap.org/wiki/STB_Electronics
- *License: http://opensource.org/licenses/BSD-3-Clause
- *
- *With the use of:
- *u8glib by Oliver Kraus
- *http://code.google.com/p/u8glib/
- *License: http://opensource.org/licenses/BSD-3-Clause
- */
-
-
-#ifndef ULTRA_LCD_IMPLEMENTATION_DOGM_H
-#define ULTRA_LCD_IMPLEMENTATION_DOGM_H
-
-/**
-* Implementation of the LCD display routines for a DOGM128 graphic display. These are common LCD 128x64 pixel graphic displays.
-**/
-
-#ifdef ULTIPANEL
-#define BLEN_A 0
-#define BLEN_B 1
-#define BLEN_C 2
-#define EN_A (1<<BLEN_A)
-#define EN_B (1<<BLEN_B)
-#define EN_C (1<<BLEN_C)
-#define encrot0 0
-#define encrot1 2
-#define encrot2 3
-#define encrot3 1
-#define LCD_CLICKED (buttons&EN_C)
-#endif
-
-#include <U8glib.h>
-#include "DOGMbitmaps.h"
-#include "dogm_font_data_marlin.h"
-#include "ultralcd.h"
-#include "ultralcd_st7920_u8glib_rrd.h"
-
-
-/* Russian language not supported yet, needs custom font
-
-#if LANGUAGE_CHOICE == 6
-#include "LiquidCrystalRus.h"
-#define LCD_CLASS LiquidCrystalRus
-#else
-#include <LiquidCrystal.h>
-#define LCD_CLASS LiquidCrystal
-#endif
-*/
-#if LANGUAGE_CHOICE == 10
-// DOGM parameters (size in pixels)
-#define DOG_CHAR_WIDTH			11
-#define DOG_CHAR_HEIGHT			12
-#define DOG_CHAR_WIDTH_LARGE	11
-#define DOG_CHAR_HEIGHT_LARGE	12
-#else
-// DOGM parameters (size in pixels)
-#define DOG_CHAR_WIDTH			6
-#define DOG_CHAR_HEIGHT			12
-#define DOG_CHAR_WIDTH_LARGE	9
-#define DOG_CHAR_HEIGHT_LARGE	18
-#endif
-
-#define START_ROW				0
-
-
-/* Custom characters defined in font font_6x10_marlin.c */
-#define LCD_STR_BEDTEMP     "\xFE"
-#define LCD_STR_DEGREE      "\xB0"
-#define LCD_STR_THERMOMETER "\xFF"
-#define LCD_STR_UPLEVEL     "\xFB"
-#define LCD_STR_REFRESH     "\xF8"
-#define LCD_STR_FOLDER      "\xF9"
-#define LCD_STR_FEEDRATE    "\xFD"
-#define LCD_STR_CLOCK       "\xFC"
-#define LCD_STR_ARROW_RIGHT "\xFA"
-
-#define FONT_STATUSMENU	u8g_font_6x9
-
-int lcd_contrast;
-
-// LCD selection
-#ifdef U8GLIB_ST7920
-//U8GLIB_ST7920_128X64_RRD u8g(0,0,0);
-U8GLIB_ST7920_128X64_RRD u8g(0);
-#elif defined(MAKRPANEL)
-// The MaKrPanel display, ST7565 controller as well
-U8GLIB_NHD_C12864 u8g(DOGLCD_CS, DOGLCD_A0);
-#elif defined(MINIPANEL)
-// The MINIPanel display
-U8GLIB_MINI12864 u8g(DOGLCD_CS, DOGLCD_A0);
-#elif defined(MULTIPANEL)
-// The MULTIPanel OLED display
-U8GLIB_SSD1309_128X64 u8g(DOGLCD_CS, DOGLCD_A0);
-#else
-// for regular DOGM128 display with HW-SPI
-U8GLIB_DOGM128 u8g(DOGLCD_CS, DOGLCD_A0);	// HW-SPI Com: CS, A0
-#endif
-
-static void lcd_implementation_init()
-{
-#ifdef LCD_PIN_BL
-	pinMode(LCD_PIN_BL, OUTPUT);	// Enable LCD backlight
-	digitalWrite(LCD_PIN_BL, HIGH);
-#endif
-
-#ifndef MINIPANEL//setContrast not working for Mini Panel
-        u8g.setContrast(lcd_contrast);	
-#endif
-	//  Uncomment this if you have the first generation (V1.10) of STBs board
-	//  pinMode(17, OUTPUT);	// Enable LCD backlight
-	//  digitalWrite(17, HIGH);
-	
-	u8g.firstPage();
-	do {
-		u8g.setFont(u8g_font_6x10_marlin);
-		u8g.setColorIndex(1);
-		u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
-		u8g.setColorIndex(1);
-	   } while( u8g.nextPage() );
-
-#ifdef LCD_SCREEN_ROT_90
-	u8g.setRot90();	// Rotate screen by 90°
-#endif
-
-#ifdef LCD_SCREEN_ROT_180
-	u8g.setRot180();	// Rotate screen by 180°
-#endif
-
-#ifdef LCD_SCREEN_ROT_270
-	u8g.setRot270();	// Rotate screen by 270°
-#endif
-
-   
-	u8g.firstPage();
-	do {
-			// RepRap init bmp
-			u8g.drawBitmapP(0,0,START_BMPBYTEWIDTH,START_BMPHEIGHT,start_bmp);
-			// Welcome message
-	/*		u8g.setFont(u8g_font_6x10_marlin);
-			u8g.drawStr(62,10,"MARLIN"); 
-			u8g.setFont(u8g_font_5x8);
-			u8g.drawStr(62,19,"V1.0.0 RC2-mm");
-			u8g.setFont(u8g_font_6x10_marlin);
-			u8g.drawStr(62,28,"by ErikZalm");
-  #if LANGUAGE_CHOICE == 10
-      u8g.setFont(chinese);
-      u8g.drawStr(62,40,"\x84\x85\x86\x87 By");
-			u8g.drawStr(62,52,"\x7f\x80\x81\x82\x83");
-			u8g.drawStr(62,63,"MakerLab.me");
-  #else
-			u8g.drawStr(62,41,"DOGM128 LCD");
-			u8g.setFont(u8g_font_5x8);
-			u8g.drawStr(62,48,"enhancements");
-			u8g.setFont(u8g_font_5x8);
-			u8g.drawStr(62,55,"by STB, MM");
-			u8g.drawStr(62,61,"uses u");
-			u8g.drawStr90(92,57,"8");
-			u8g.drawStr(100,61,"glib");
-  #endif
-			//u8g.setFont(u8g_font_5x8);
-			//u8g.drawStr(62,61,"uses u");
-			//u8g.drawStr90(92,57,"8");
-			//u8g.drawStr(100,61,"glib");
-*/
-	   } while( u8g.nextPage() );
-}
-
-static void lcd_implementation_clear()
-{
-// NO NEED TO IMPLEMENT LIKE SO. Picture loop automatically clears the display.
-//
-// Check this article: http://arduino.cc/forum/index.php?topic=91395.25;wap2
-//
-//	u8g.firstPage();
-//	do {	
-//			u8g.setColorIndex(0);
-//			u8g.drawBox (0, 0, u8g.getWidth(), u8g.getHeight());
-//			u8g.setColorIndex(1);
-//		} while( u8g.nextPage() );
-}
-
-/* Arduino < 1.0.0 is missing a function to print PROGMEM strings, so we need to implement our own */
-static void lcd_printPGM(const char* str)
-{
-    char c;
-    while((c = pgm_read_byte(str++)) != '\0')
-    {
-			u8g.print(c);
-    }
-}
-
-
-static void lcd_implementation_status_screen()
-{
-
- static unsigned char fan_rot = 0;
- 
- u8g.setColorIndex(1);	// black on white
- 
- // Symbols menu graphics, animated fan
- if ((blink % 2) &&  fanSpeed )	u8g.drawBitmapP(0,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT,status_screen0_bmp);
-	else u8g.drawBitmapP(0,1,STATUS_SCREENBYTEWIDTH,STATUS_SCREENHEIGHT,status_screen1_bmp);
- 
- #ifdef SDSUPPORT
- //SD Card Symbol
- u8g.drawBox(42,42,8,7);
- u8g.drawBox(50,44,2,5);
- u8g.drawFrame(42,49,10,4);
- u8g.drawPixel(50,43);
- // Progress bar
- u8g.drawFrame(54,49,73,4);
- 
- // SD Card Progress bar and clock
- u8g.setFont(FONT_STATUSMENU);
- 
- if (IS_SD_PRINTING)
-   {
-	// Progress bar
-	u8g.drawBox(55,50, (unsigned int)( (71 * card.percentDone())/100) ,2);
-   }
-    else {
-			// do nothing
-		 }
- 
- u8g.setPrintPos(80,47);
- if(starttime != 0)
-    {
-        uint16_t time = millis()/60000 - starttime/60000;
-
-		u8g.print(itostr2(time/60));
-		u8g.print(':');
-		u8g.print(itostr2(time%60));
-    }else{
-			lcd_printPGM(PSTR("--:--"));
-		 }
- #endif
- 
- // Extruder 1
- u8g.setFont(FONT_STATUSMENU);
- u8g.setPrintPos(39,6);
- u8g.print(itostr3(int(degTargetHotend(0) + 0.5)));
- lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
- u8g.setPrintPos(38,27);
- u8g.print(itostr3(int(degHotend(0) + 0.5)));
- lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
- if (!isHeatingHotend(0)) u8g.drawBox(13+33,16,2,2);
-	else
-		{
-		 u8g.setColorIndex(0);	// white on black
-		 u8g.drawBox(13+33,16,2,2);
-		 u8g.setColorIndex(1);	// black on white
-		}
- 
- // Extruder 2
- /*u8g.setFont(FONT_STATUSMENU);
- #if EXTRUDERS > 1
- u8g.setPrintPos(31,6);
- u8g.print(itostr3(int(degTargetHotend(1) + 0.5)));
- lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
- u8g.setPrintPos(31,27);
- u8g.print(itostr3(int(degHotend(1) + 0.5)));
- lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
- if (!isHeatingHotend(1)) u8g.drawBox(38,17,2,2);
-	else
-		{
-		 u8g.setColorIndex(0);	// white on black
-		 u8g.drawBox(38,17,2,2);
-		 u8g.setColorIndex(1);	// black on white
-		}
- #else
- u8g.setPrintPos(31,27);
- u8g.print("---");
- #endif
- 
- // Extruder 3
- u8g.setFont(FONT_STATUSMENU);
- # if EXTRUDERS > 2
- u8g.setPrintPos(55,6);
- u8g.print(itostr3(int(degTargetHotend(2) + 0.5)));
- lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
- u8g.setPrintPos(55,27);
- u8g.print(itostr3(int(degHotend(2) + 0.5)));
- lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
- if (!isHeatingHotend(2)) u8g.drawBox(62,17,2,2);
-	else
-		{
-		 u8g.setColorIndex(0);	// white on black
-		 u8g.drawBox(62,17,2,2);
-		 u8g.setColorIndex(1);	// black on white
-		}
- #else
- u8g.setPrintPos(55,27);
- u8g.print("---");
- #endif
- */
- // Heatbed
- u8g.setFont(FONT_STATUSMENU);
- u8g.setPrintPos(81-9,6);
- u8g.print(itostr3(int(degTargetBed() + 0.5)));
- lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
- u8g.setPrintPos(81-9,27);
- u8g.print(itostr3(int(degBed() + 0.5)));
- lcd_printPGM(PSTR(LCD_STR_DEGREE " "));
- if (!isHeatingBed()) u8g.drawBox(88-9,18,2,2);
-	else
-		{
-		 u8g.setColorIndex(0);	// white on black
-		 u8g.drawBox(88-9,18,2,2);
-		 u8g.setColorIndex(1);	// black on white
-		}
- 
- // Fan
- u8g.setFont(FONT_STATUSMENU);
- u8g.setPrintPos(103,27);
- #if defined(FAN_PIN) && FAN_PIN > -1
- u8g.print(itostr3(int((fanSpeed*100)/256 + 1)));
- u8g.print("%");
- #else
- u8g.print("---");
- #endif
- 
- 
- // X, Y, Z-Coordinates
- u8g.setFont(FONT_STATUSMENU);
- u8g.drawBox(0,29,128,10);
- u8g.setColorIndex(0);	// white on black
- u8g.setPrintPos(2,37);
- u8g.print("X");
- u8g.drawPixel(8,33);
- u8g.drawPixel(8,35);
- u8g.setPrintPos(10,37);
- u8g.print(ftostr31ns(current_position[X_AXIS]));
- u8g.setPrintPos(43,37);
- lcd_printPGM(PSTR("Y"));
- u8g.drawPixel(49,33);
- u8g.drawPixel(49,35);
- u8g.setPrintPos(51,37);
- u8g.print(ftostr31ns(current_position[Y_AXIS]));
- u8g.setPrintPos(83,37);
- u8g.print("Z");
- u8g.drawPixel(89,33);
- u8g.drawPixel(89,35);
- u8g.setPrintPos(91,37);
- u8g.print(ftostr31(current_position[Z_AXIS]));
- u8g.setColorIndex(1);	// black on white
- 
- // Feedrate
- u8g.setFont(u8g_font_6x10_marlin);
- u8g.setPrintPos(3,49);
- u8g.print(LCD_STR_FEEDRATE[0]);
- u8g.setFont(FONT_STATUSMENU);
- u8g.setPrintPos(12,48);
- u8g.print(itostr3(feedmultiply));
- u8g.print('%');
-
- // Status line
-#if LANGUAGE_CHOICE == 10
- u8g.setFont(chinese);
- u8g.setPrintPos(0,63);
-#else
- u8g.setFont(FONT_STATUSMENU);
- u8g.setPrintPos(0,61);
-#endif
- u8g.print(lcd_status_message);
-
-}
-
-static void lcd_implementation_drawmenu_generic(uint8_t row, const char* pstr, char pre_char, char post_char)
-{
-    char c;
-    
-    uint8_t n = LCD_WIDTH - 1 - 2;
-		
-		if ((pre_char == '>') || (pre_char == LCD_STR_UPLEVEL[0] ))
-		   {
-			u8g.setColorIndex(1);		// black on white
-#if LANGUAGE_CHOICE == 10
-			u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 2, 128, DOG_CHAR_HEIGHT);
-#else
-			u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
-#endif
-			u8g.setColorIndex(0);		// following text must be white on black
-		   } else u8g.setColorIndex(1); // unmarked text is black on white
-		
-		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
-		if (pre_char != '>') u8g.print(pre_char); else u8g.print(' ');	// Row selector is obsolete
-
-
-    while( (c = pgm_read_byte(pstr)) != '\0' )
-    {
-		u8g.print(c);
-        pstr++;
-        n--;
-    }
-    while(n--){
-					u8g.print(' ');
-		}
-	   
-		u8g.print(post_char);
-		u8g.print(' ');
-		u8g.setColorIndex(1);		// restore settings to black on white
-}
-
-static void lcd_implementation_drawmenu_setting_edit_generic(uint8_t row, const char* pstr, char pre_char, char* data)
-{
-    static unsigned int fkt_cnt = 0;
-	char c;
-    uint8_t n = LCD_WIDTH - 1 - 2 - strlen(data);
-		
-		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
-		u8g.print(pre_char);
-	
-    while( (c = pgm_read_byte(pstr)) != '\0' )
-    {
-			u8g.print(c);
-		
-        pstr++;
-        n--;
-    }
-		u8g.print(':');
-
-    while(n--){
-					u8g.print(' ');
-			  }
-
-		u8g.print(data);
-}
-
-static void lcd_implementation_drawmenu_setting_edit_generic_P(uint8_t row, const char* pstr, char pre_char, const char* data)
-{
-    char c;
-    uint8_t n= LCD_WIDTH - 1 - 2 - strlen_P(data);
-
-		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
-		u8g.print(pre_char);
-	
-    while( (c = pgm_read_byte(pstr)) != '\0' )
-    {
-			u8g.print(c);
-		
-        pstr++;
-        n--;
-    }
-		u8g.print(':');
-	
-    while(n--){
-					u8g.print(' ');
-			  }
-
-		lcd_printPGM(data);
-}
-
-#define lcd_implementation_drawmenu_setting_edit_int3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_int3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float3_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float3(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float32_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float32(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float52_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float52(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float51_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_float51(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_long5_selected(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_long5(row, pstr, pstr2, data, minValue, maxValue) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_bool_selected(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
-#define lcd_implementation_drawmenu_setting_edit_bool(row, pstr, pstr2, data) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
-
-//Add version for callback functions
-#define lcd_implementation_drawmenu_setting_edit_callback_int3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', itostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_int3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', itostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float3_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float3(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr3(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float32_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr32(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float32(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr32(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float52_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr52(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float52(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr52(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float51_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr51(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_float51(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr51(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_long5_selected(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, '>', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_long5(row, pstr, pstr2, data, minValue, maxValue, callback) lcd_implementation_drawmenu_setting_edit_generic(row, pstr, ' ', ftostr5(*(data)))
-#define lcd_implementation_drawmenu_setting_edit_callback_bool_selected(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, '>', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
-#define lcd_implementation_drawmenu_setting_edit_callback_bool(row, pstr, pstr2, data, callback) lcd_implementation_drawmenu_setting_edit_generic_P(row, pstr, ' ', (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF))
-
-void lcd_implementation_drawedit(const char* pstr, char* value)
-{
-		u8g.setPrintPos(0 * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
-  #if LANGUAGE_CHOICE == 10 
-    u8g.setFont(chinese);
-  #else
-    u8g.setFont(u8g_font_9x18);
-  #endif
-		lcd_printPGM(pstr);
-		u8g.print(':');
-  #if LANGUAGE_CHOICE == 10 
-		u8g.setPrintPos((12 - strlen(value)) * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
-  #else
-		u8g.setPrintPos((14 - strlen(value)) * DOG_CHAR_WIDTH_LARGE, (u8g.getHeight() - 1 - DOG_CHAR_HEIGHT_LARGE) - (1 * DOG_CHAR_HEIGHT_LARGE) - START_ROW );
-  #endif
-		u8g.print(value);
-}
-
-static void lcd_implementation_drawmenu_sdfile_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
-{
-    char c;
-    uint8_t n = LCD_WIDTH - 1;
-
-    if (longFilename[0] != '\0')
-    {
-        filename = longFilename;
-        longFilename[LCD_WIDTH-1] = '\0';
-    }
-
-		u8g.setColorIndex(1);		// black on white
-		u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
-		u8g.setColorIndex(0);		// following text must be white on black
-		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
-		u8g.print(' ');	// Indent by 1 char
-	   
-    while((c = *filename) != '\0')
-    {
-		u8g.print(c);
-        filename++;
-        n--;
-    }
-    while(n--){
-					u8g.print(' ');
-			   }
-	u8g.setColorIndex(1);		// black on white
-}
-
-static void lcd_implementation_drawmenu_sdfile(uint8_t row, const char* pstr, const char* filename, char* longFilename)
-{
-    char c;
-    uint8_t n = LCD_WIDTH - 1;
-
-    if (longFilename[0] != '\0')
-    {
-        filename = longFilename;
-        longFilename[LCD_WIDTH-1] = '\0';
-    }
-
-		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
-		u8g.print(' ');
-		
-while((c = *filename) != '\0')
-    {
-			u8g.print(c);
-		
-        filename++;
-        n--;
-    }
-    while(n--){
-					u8g.print(' ');
-			   }
-
-}
-
-static void lcd_implementation_drawmenu_sddirectory_selected(uint8_t row, const char* pstr, const char* filename, char* longFilename)
-{
-    char c;
-    uint8_t n = LCD_WIDTH - 2;
-		
-    if (longFilename[0] != '\0')
-    {
-        filename = longFilename;
-        longFilename[LCD_WIDTH-2] = '\0';
-    }
-		u8g.setColorIndex(1);		// black on white
-		u8g.drawBox (0, row*DOG_CHAR_HEIGHT + 3, 128, DOG_CHAR_HEIGHT);
-		u8g.setColorIndex(0);		// following text must be white on black
-		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
-		u8g.print(' ');	// Indent by 1 char
-		u8g.print(LCD_STR_FOLDER[0]);		
-	   
-    while((c = *filename) != '\0')
-    {
-			u8g.print(c);
-		
-        filename++;
-        n--;
-    }
-    while(n--){
-					u8g.print(' ');
-			   }
-	u8g.setColorIndex(1);		// black on white
-}
-
-static void lcd_implementation_drawmenu_sddirectory(uint8_t row, const char* pstr, const char* filename, char* longFilename)
-{
-    char c;
-    uint8_t n = LCD_WIDTH - 2;
-
-    if (longFilename[0] != '\0')
-    {
-        filename = longFilename;
-        longFilename[LCD_WIDTH-2] = '\0';
-    }
-
-		u8g.setPrintPos(0 * DOG_CHAR_WIDTH, (row + 1) * DOG_CHAR_HEIGHT);
-		u8g.print(' ');
-		u8g.print(LCD_STR_FOLDER[0]);
-
-    while((c = *filename) != '\0')
-    {
-			u8g.print(c);
-		
-        filename++;
-        n--;
-    }
-    while(n--){
-					u8g.print(' ');
-			   }
-}
-
-#define lcd_implementation_drawmenu_back_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, LCD_STR_UPLEVEL[0], LCD_STR_UPLEVEL[0])
-#define lcd_implementation_drawmenu_back(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_UPLEVEL[0])
-#define lcd_implementation_drawmenu_submenu_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', LCD_STR_ARROW_RIGHT[0])
-#define lcd_implementation_drawmenu_submenu(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', LCD_STR_ARROW_RIGHT[0])
-#define lcd_implementation_drawmenu_gcode_selected(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
-#define lcd_implementation_drawmenu_gcode(row, pstr, gcode) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
-#define lcd_implementation_drawmenu_function_selected(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, '>', ' ')
-#define lcd_implementation_drawmenu_function(row, pstr, data) lcd_implementation_drawmenu_generic(row, pstr, ' ', ' ')
-
-static void lcd_implementation_quick_feedback()
-{
-
-#if BEEPER > -1
-    SET_OUTPUT(BEEPER);
-    for(int8_t i=0;i<10;i++)
-    {
-		WRITE(BEEPER,HIGH);
-		delay(3);
-		WRITE(BEEPER,LOW);
-		delay(3);
-    }
-#endif
-}
-#endif//ULTRA_LCD_IMPLEMENTATION_DOGM_H
-
-

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/duration_t.h

@@ -0,0 +1,167 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __DURATION_T__
+#define __DURATION_T__
+
+struct duration_t {
+  /**
+   * @brief Duration is stored in seconds
+   */
+  uint32_t value;
+
+  /**
+   * @brief Constructor
+   */
+  duration_t()
+    : duration_t(0) {};
+
+  /**
+   * @brief Constructor
+   *
+   * @param seconds The number of seconds
+   */
+  duration_t(uint32_t const &seconds) {
+    this->value = seconds;
+  }
+
+  /**
+   * @brief Equality comparison
+   * @details Overloads the equality comparison operator
+   *
+   * @param value The number of seconds to compare to
+   * @return True if both durations are equal
+   */
+  bool operator==(const uint32_t &value) const {
+    return (this->value == value);
+  }
+
+  /**
+   * @brief Inequality comparison
+   * @details Overloads the inequality comparison operator
+   *
+   * @param value The number of seconds to compare to
+   * @return False if both durations are equal
+   */
+  bool operator!=(const uint32_t &value) const {
+    return ! this->operator==(value);
+  }
+
+  /**
+   * @brief Formats the duration as years
+   * @return The number of years
+   */
+  inline uint8_t year() const {
+    return this->day() / 365;
+  }
+
+  /**
+   * @brief Formats the duration as days
+   * @return The number of days
+   */
+  inline uint16_t day() const {
+    return this->hour() / 24;
+  }
+
+  /**
+   * @brief Formats the duration as hours
+   * @return The number of hours
+   */
+  inline uint32_t hour() const {
+    return this->minute() / 60;
+  }
+
+  /**
+   * @brief Formats the duration as minutes
+   * @return The number of minutes
+   */
+  inline uint32_t minute() const {
+    return this->second() / 60;
+  }
+
+  /**
+   * @brief Formats the duration as seconds
+   * @return The number of seconds
+   */
+  inline uint32_t second() const {
+    return this->value;
+  }
+
+  /**
+   * @brief Formats the duration as a string
+   * @details String will be formated using a "full" representation of duration
+   *
+   * @param buffer The array pointed to must be able to accommodate 21 bytes
+   *
+   * Output examples:
+   *  123456789012345678901 (strlen)
+   *  135y 364d 23h 59m 59s
+   *  364d 23h 59m 59s
+   *  23h 59m 59s
+   *  59m 59s
+   *  59s
+   */
+  void toString(char *buffer) const {
+    int y = this->year(),
+        d = this->day() % 365,
+        h = this->hour() % 24,
+        m = this->minute() % 60,
+        s = this->second() % 60;
+
+    if (y) sprintf_P(buffer, PSTR("%iy %id %ih %im %is"), y, d, h, m, s);
+    else if (d) sprintf_P(buffer, PSTR("%id %ih %im %is"), d, h, m, s);
+    else if (h) sprintf_P(buffer, PSTR("%ih %im %is"), h, m, s);
+    else if (m) sprintf_P(buffer, PSTR("%im %is"), m, s);
+    else sprintf_P(buffer, PSTR("%is"), s);
+  }
+
+  /**
+   * @brief Formats the duration as a string
+   * @details String will be formated using a "digital" representation of duration
+   *
+   * @param buffer The array pointed to must be able to accommodate 10 bytes
+   *
+   * Output examples:
+   *  123456789 (strlen)
+   *  99:59
+   *  11d 12:33
+   */
+  uint8_t toDigital(char *buffer, bool with_days=false) const {
+    uint16_t h = uint16_t(this->hour()),
+             m = uint16_t(this->minute() % 60UL);
+    if (with_days) {
+      uint16_t d = this->day();
+      sprintf_P(buffer, PSTR("%ud %02u:%02u"), d, h % 24, m);
+      return d >= 10 ? 8 : 7;
+    }
+    else if (h < 100) {
+      sprintf_P(buffer, PSTR("%02u:%02u"), h % 24, m);
+      return 5;
+    }
+    else {
+      sprintf_P(buffer, PSTR("%u:%02u"), h, m);
+      return 6;
+    }
+  }
+};
+
+#endif // __DURATION_T__

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/endstop_interrupts.h

@@ -0,0 +1,206 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Endstop Interrupts
+ *
+ * Without endstop interrupts the endstop pins must be polled continually in
+ * the stepper-ISR via endstops.update(), most of the time finding no change.
+ * With this feature endstops.update() is called only when we know that at
+ * least one endstop has changed state, saving valuable CPU cycles.
+ *
+ * This feature only works when all used endstop pins can generate either an
+ * 'external interrupt' or a 'pin change interrupt'.
+ *
+ * Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
+ * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
+ */
+
+#ifndef _ENDSTOP_INTERRUPTS_H_
+#define _ENDSTOP_INTERRUPTS_H_
+
+#include "macros.h"
+
+/**
+ * Patch for pins_arduino.h (...\Arduino\hardware\arduino\avr\variants\mega\pins_arduino.h)
+ *
+ * These macros for the Arduino MEGA do not include the two connected pins on Port J (D13, D14).
+ * So we extend them here because these are the normal pins for Y_MIN and Y_MAX on RAMPS.
+ * There are more PCI-enabled processor pins on Port J, but they are not connected to Arduino MEGA.
+ */
+#if defined(ARDUINO_AVR_MEGA2560) || defined(ARDUINO_AVR_MEGA)
+  #undef  digitalPinToPCICR
+  #define digitalPinToPCICR(p)    ( WITHIN(p, 10, 15) || \
+                                    WITHIN(p, 50, 53) || \
+                                    WITHIN(p, 62, 69) ? &PCICR : (uint8_t*)0 )
+  #undef  digitalPinToPCICRbit
+  #define digitalPinToPCICRbit(p) ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? 0 : \
+                                    WITHIN(p, 14, 15) ? 1 : \
+                                    WITHIN(p, 62, 69) ? 2 : \
+                                    0 )
+  #undef  digitalPinToPCMSK
+  #define digitalPinToPCMSK(p)    ( WITHIN(p, 10, 13) || WITHIN(p, 50, 53) ? &PCMSK0 : \
+                                    WITHIN(p, 14, 15) ? &PCMSK1 : \
+                                    WITHIN(p, 62, 69) ? &PCMSK2 : \
+                                    (uint8_t *)0 )
+  #undef  digitalPinToPCMSKbit
+  #define digitalPinToPCMSKbit(p) ( WITHIN(p, 10, 13) ? ((p) - 6) : \
+                                    (p) == 14 || (p) == 51 ? 2 : \
+                                    (p) == 15 || (p) == 52 ? 1 : \
+                                    (p) == 50 ? 3 : \
+                                    (p) == 53 ? 0 : \
+                                    WITHIN(p, 62, 69) ? ((p) - 62) : \
+                                    0 )
+#endif
+
+volatile uint8_t e_hit = 0; // Different from 0 when the endstops should be tested in detail.
+                            // Must be reset to 0 by the test function when finished.
+
+// Install Pin change interrupt for a pin. Can be called multiple times.
+void pciSetup(byte pin) {
+  SBI(*digitalPinToPCMSK(pin), digitalPinToPCMSKbit(pin));  // enable pin
+  SBI(PCIFR, digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
+  SBI(PCICR, digitalPinToPCICRbit(pin)); // enable interrupt for the group
+}
+
+// This is what is really done inside the interrupts.
+FORCE_INLINE void endstop_ISR_worker( void ) {
+  e_hit = 2; // Because the detection of a e-stop hit has a 1 step debouncer it has to be called at least twice.
+}
+
+// Use one Routine to handle each group
+// One ISR for all EXT-Interrupts
+void endstop_ISR(void) { endstop_ISR_worker(); }
+
+// Handlers for pin change interrupts
+#ifdef PCINT0_vect
+  ISR(PCINT0_vect) { endstop_ISR_worker(); }
+#endif
+
+#ifdef PCINT1_vect
+  ISR(PCINT1_vect) { endstop_ISR_worker(); }
+#endif
+
+#ifdef PCINT2_vect
+  ISR(PCINT2_vect) { endstop_ISR_worker(); }
+#endif
+
+#ifdef PCINT3_vect
+  ISR(PCINT3_vect) { endstop_ISR_worker(); }
+#endif
+
+void setup_endstop_interrupts( void ) {
+
+  #if HAS_X_MAX
+    #if (digitalPinToInterrupt(X_MAX_PIN) != NOT_AN_INTERRUPT) // if pin has an external interrupt
+      attachInterrupt(digitalPinToInterrupt(X_MAX_PIN), endstop_ISR, CHANGE); // assign it
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(X_MAX_PIN) != NULL, "X_MAX_PIN is not interrupt-capable"); // if pin has no pin change interrupt - error
+      pciSetup(X_MAX_PIN);                                                            // assign it
+    #endif
+  #endif
+
+  #if HAS_X_MIN
+    #if (digitalPinToInterrupt(X_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(X_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "X_MIN_PIN is not interrupt-capable");
+      pciSetup(X_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_Y_MAX
+    #if (digitalPinToInterrupt(Y_MAX_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Y_MAX_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Y_MAX_PIN) != NULL, "Y_MAX_PIN is not interrupt-capable");
+      pciSetup(Y_MAX_PIN);
+    #endif
+  #endif
+
+  #if HAS_Y_MIN
+    #if (digitalPinToInterrupt(Y_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Y_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Y_MIN_PIN) != NULL, "Y_MIN_PIN is not interrupt-capable");
+      pciSetup(Y_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z_MAX
+    #if (digitalPinToInterrupt(Z_MAX_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z_MAX_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z_MAX_PIN) != NULL, "Z_MAX_PIN is not interrupt-capable");
+      pciSetup(Z_MAX_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z_MIN
+    #if (digitalPinToInterrupt(Z_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z_MIN_PIN) != NULL, "Z_MIN_PIN is not interrupt-capable");
+      pciSetup(Z_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z2_MAX
+    #if (digitalPinToInterrupt(Z2_MAX_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z2_MAX_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z2_MAX_PIN) != NULL, "Z2_MAX_PIN is not interrupt-capable");
+      pciSetup(Z2_MAX_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z2_MIN
+    #if (digitalPinToInterrupt(Z2_MIN_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z2_MIN_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z2_MIN_PIN) != NULL, "Z2_MIN_PIN is not interrupt-capable");
+      pciSetup(Z2_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z_MIN_PROBE_PIN
+    #if (digitalPinToInterrupt(Z_MIN_PROBE_PIN) != NOT_AN_INTERRUPT)
+      attachInterrupt(digitalPinToInterrupt(Z_MIN_PROBE_PIN), endstop_ISR, CHANGE);
+    #else
+      // Not all used endstop/probe -pins can raise interrupts. Please deactivate ENDSTOP_INTERRUPTS or change the pin configuration!
+      static_assert(digitalPinToPCICR(Z_MIN_PROBE_PIN) != NULL, "Z_MIN_PROBE_PIN is not interrupt-capable");
+      pciSetup(Z_MIN_PROBE_PIN);
+    #endif
+  #endif
+
+  // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
+}
+
+#endif // _ENDSTOP_INTERRUPTS_H_

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/endstops.cpp

@@ -0,0 +1,451 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * endstops.cpp - A singleton object to manage endstops
+ */
+
+#include "Marlin.h"
+#include "cardreader.h"
+#include "endstops.h"
+#include "temperature.h"
+#include "stepper.h"
+#include "ultralcd.h"
+
+// TEST_ENDSTOP: test the old and the current status of an endstop
+#define TEST_ENDSTOP(ENDSTOP) (TEST(current_endstop_bits & old_endstop_bits, ENDSTOP))
+
+Endstops endstops;
+
+// public:
+
+bool Endstops::enabled, Endstops::enabled_globally; // Initialized by settings.load()
+volatile char Endstops::endstop_hit_bits; // use X_MIN, Y_MIN, Z_MIN and Z_MIN_PROBE as BIT value
+
+#if ENABLED(Z_DUAL_ENDSTOPS)
+  uint16_t
+#else
+  byte
+#endif
+    Endstops::current_endstop_bits = 0,
+    Endstops::old_endstop_bits = 0;
+
+#if HAS_BED_PROBE
+  volatile bool Endstops::z_probe_enabled = false;
+#endif
+
+/**
+ * Class and Instance Methods
+ */
+
+void Endstops::init() {
+
+  #if HAS_X_MIN
+    #if ENABLED(ENDSTOPPULLUP_XMIN)
+      SET_INPUT_PULLUP(X_MIN_PIN);
+    #else
+      SET_INPUT(X_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_Y_MIN
+    #if ENABLED(ENDSTOPPULLUP_YMIN)
+      SET_INPUT_PULLUP(Y_MIN_PIN);
+    #else
+      SET_INPUT(Y_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z_MIN
+    #if ENABLED(ENDSTOPPULLUP_ZMIN)
+      SET_INPUT_PULLUP(Z_MIN_PIN);
+    #else
+      SET_INPUT(Z_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z2_MIN
+    #if ENABLED(ENDSTOPPULLUP_ZMIN)
+      SET_INPUT_PULLUP(Z2_MIN_PIN);
+    #else
+      SET_INPUT(Z2_MIN_PIN);
+    #endif
+  #endif
+
+  #if HAS_X_MAX
+    #if ENABLED(ENDSTOPPULLUP_XMAX)
+      SET_INPUT_PULLUP(X_MAX_PIN);
+    #else
+      SET_INPUT(X_MAX_PIN);
+    #endif
+  #endif
+
+  #if HAS_Y_MAX
+    #if ENABLED(ENDSTOPPULLUP_YMAX)
+      SET_INPUT_PULLUP(Y_MAX_PIN);
+    #else
+      SET_INPUT(Y_MAX_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z_MAX
+    #if ENABLED(ENDSTOPPULLUP_ZMAX)
+      SET_INPUT_PULLUP(Z_MAX_PIN);
+    #else
+      SET_INPUT(Z_MAX_PIN);
+    #endif
+  #endif
+
+  #if HAS_Z2_MAX
+    #if ENABLED(ENDSTOPPULLUP_ZMAX)
+      SET_INPUT_PULLUP(Z2_MAX_PIN);
+    #else
+      SET_INPUT(Z2_MAX_PIN);
+    #endif
+  #endif
+
+  #if ENABLED(Z_MIN_PROBE_ENDSTOP)
+    #if ENABLED(ENDSTOPPULLUP_ZMIN_PROBE)
+      SET_INPUT_PULLUP(Z_MIN_PROBE_PIN);
+    #else
+      SET_INPUT(Z_MIN_PROBE_PIN);
+    #endif
+  #endif
+
+} // Endstops::init
+
+void Endstops::report_state() {
+  if (endstop_hit_bits) {
+    #if ENABLED(ULTRA_LCD)
+      char chrX = ' ', chrY = ' ', chrZ = ' ', chrP = ' ';
+      #define _SET_STOP_CHAR(A,C) (chr## A = C)
+    #else
+      #define _SET_STOP_CHAR(A,C) ;
+    #endif
+
+    #define _ENDSTOP_HIT_ECHO(A,C) do{ \
+      SERIAL_ECHOPAIR(" " STRINGIFY(A) ":", stepper.triggered_position_mm(A ##_AXIS)); \
+      _SET_STOP_CHAR(A,C); }while(0)
+
+    #define _ENDSTOP_HIT_TEST(A,C) \
+      if (TEST(endstop_hit_bits, A ##_MIN) || TEST(endstop_hit_bits, A ##_MAX)) \
+        _ENDSTOP_HIT_ECHO(A,C)
+
+    #define ENDSTOP_HIT_TEST_X() _ENDSTOP_HIT_TEST(X,'X')
+    #define ENDSTOP_HIT_TEST_Y() _ENDSTOP_HIT_TEST(Y,'Y')
+    #define ENDSTOP_HIT_TEST_Z() _ENDSTOP_HIT_TEST(Z,'Z')
+
+    SERIAL_ECHO_START();
+    SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
+    ENDSTOP_HIT_TEST_X();
+    ENDSTOP_HIT_TEST_Y();
+    ENDSTOP_HIT_TEST_Z();
+
+    #if ENABLED(Z_MIN_PROBE_ENDSTOP)
+      #define P_AXIS Z_AXIS
+      if (TEST(endstop_hit_bits, Z_MIN_PROBE)) _ENDSTOP_HIT_ECHO(P, 'P');
+    #endif
+    SERIAL_EOL();
+
+    #if ENABLED(ULTRA_LCD)
+      lcd_status_printf_P(0, PSTR(MSG_LCD_ENDSTOPS " %c %c %c %c"), chrX, chrY, chrZ, chrP);
+    #endif
+
+    hit_on_purpose();
+
+    #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT)
+      if (stepper.abort_on_endstop_hit) {
+        card.sdprinting = false;
+        card.closefile();
+        quickstop_stepper();
+        thermalManager.disable_all_heaters(); // switch off all heaters.
+      }
+    #endif
+  }
+} // Endstops::report_state
+
+void Endstops::M119() {
+  SERIAL_PROTOCOLLNPGM(MSG_M119_REPORT);
+  #if HAS_X_MIN
+    SERIAL_PROTOCOLPGM(MSG_X_MIN);
+    SERIAL_PROTOCOLLN(((READ(X_MIN_PIN)^X_MIN_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
+  #endif
+  #if HAS_X_MAX
+    SERIAL_PROTOCOLPGM(MSG_X_MAX);
+    SERIAL_PROTOCOLLN(((READ(X_MAX_PIN)^X_MAX_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
+  #endif
+  #if HAS_Y_MIN
+    SERIAL_PROTOCOLPGM(MSG_Y_MIN);
+    SERIAL_PROTOCOLLN(((READ(Y_MIN_PIN)^Y_MIN_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
+  #endif
+  #if HAS_Y_MAX
+    SERIAL_PROTOCOLPGM(MSG_Y_MAX);
+    SERIAL_PROTOCOLLN(((READ(Y_MAX_PIN)^Y_MAX_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
+  #endif
+  #if HAS_Z_MIN
+    SERIAL_PROTOCOLPGM(MSG_Z_MIN);
+    SERIAL_PROTOCOLLN(((READ(Z_MIN_PIN)^Z_MIN_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
+  #endif
+  #if HAS_Z2_MIN
+    SERIAL_PROTOCOLPGM(MSG_Z2_MIN);
+    SERIAL_PROTOCOLLN(((READ(Z2_MIN_PIN)^Z2_MIN_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
+  #endif
+  #if HAS_Z_MAX
+    SERIAL_PROTOCOLPGM(MSG_Z_MAX);
+    SERIAL_PROTOCOLLN(((READ(Z_MAX_PIN)^Z_MAX_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
+  #endif
+  #if HAS_Z2_MAX
+    SERIAL_PROTOCOLPGM(MSG_Z2_MAX);
+    SERIAL_PROTOCOLLN(((READ(Z2_MAX_PIN)^Z2_MAX_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
+  #endif
+  #if ENABLED(Z_MIN_PROBE_ENDSTOP)
+    SERIAL_PROTOCOLPGM(MSG_Z_PROBE);
+    SERIAL_PROTOCOLLN(((READ(Z_MIN_PROBE_PIN)^Z_MIN_PROBE_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
+  #endif
+  #if ENABLED(FILAMENT_RUNOUT_SENSOR)
+    SERIAL_PROTOCOLPGM(MSG_FILAMENT_RUNOUT_SENSOR);
+    SERIAL_PROTOCOLLN(((READ(FIL_RUNOUT_PIN)^FIL_RUNOUT_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN));
+  #endif
+} // Endstops::M119
+
+#if ENABLED(Z_DUAL_ENDSTOPS)
+
+  // Pass the result of the endstop test
+  void Endstops::test_dual_z_endstops(const EndstopEnum es1, const EndstopEnum es2) {
+    byte z_test = TEST_ENDSTOP(es1) | (TEST_ENDSTOP(es2) << 1); // bit 0 for Z, bit 1 for Z2
+    if (z_test && stepper.current_block->steps[Z_AXIS] > 0) {
+      SBI(endstop_hit_bits, Z_MIN);
+      if (!stepper.performing_homing || (z_test == 0x3))  //if not performing home or if both endstops were trigged during homing...
+        stepper.kill_current_block();
+    }
+  }
+
+#endif
+
+// Check endstops - Called from ISR!
+void Endstops::update() {
+
+  #define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX
+  #define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN
+  #define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING
+  #define _ENDSTOP_HIT(AXIS, MINMAX) SBI(endstop_hit_bits, _ENDSTOP(AXIS, MINMAX))
+
+  // UPDATE_ENDSTOP_BIT: set the current endstop bits for an endstop to its status
+  #define UPDATE_ENDSTOP_BIT(AXIS, MINMAX) SET_BIT(current_endstop_bits, _ENDSTOP(AXIS, MINMAX), (READ(_ENDSTOP_PIN(AXIS, MINMAX)) != _ENDSTOP_INVERTING(AXIS, MINMAX)))
+  // COPY_BIT: copy the value of SRC_BIT to DST_BIT in DST
+  #define COPY_BIT(DST, SRC_BIT, DST_BIT) SET_BIT(DST, DST_BIT, TEST(DST, SRC_BIT))
+
+  #define UPDATE_ENDSTOP(AXIS,MINMAX) do { \
+      UPDATE_ENDSTOP_BIT(AXIS, MINMAX); \
+      if (TEST_ENDSTOP(_ENDSTOP(AXIS, MINMAX)) && stepper.current_block->steps[_AXIS(AXIS)] > 0) { \
+        _ENDSTOP_HIT(AXIS, MINMAX); \
+        stepper.endstop_triggered(_AXIS(AXIS)); \
+      } \
+    } while(0)
+
+  #if ENABLED(G38_PROBE_TARGET) && PIN_EXISTS(Z_MIN_PROBE) && !(CORE_IS_XY || CORE_IS_XZ)
+    // If G38 command is active check Z_MIN_PROBE for ALL movement
+    if (G38_move) {
+      UPDATE_ENDSTOP_BIT(Z, MIN_PROBE);
+      if (TEST_ENDSTOP(_ENDSTOP(Z, MIN_PROBE))) {
+        if      (stepper.current_block->steps[_AXIS(X)] > 0) { _ENDSTOP_HIT(X, MIN); stepper.endstop_triggered(_AXIS(X)); }
+        else if (stepper.current_block->steps[_AXIS(Y)] > 0) { _ENDSTOP_HIT(Y, MIN); stepper.endstop_triggered(_AXIS(Y)); }
+        else if (stepper.current_block->steps[_AXIS(Z)] > 0) { _ENDSTOP_HIT(Z, MIN); stepper.endstop_triggered(_AXIS(Z)); }
+        G38_endstop_hit = true;
+      }
+    }
+  #endif
+
+  /**
+   * Define conditions for checking endstops
+   */
+
+  #if IS_CORE
+    #define S_(N) stepper.current_block->steps[CORE_AXIS_##N]
+    #define D_(N) stepper.motor_direction(CORE_AXIS_##N)
+  #endif
+
+  #if CORE_IS_XY || CORE_IS_XZ
+    /**
+     * Head direction in -X axis for CoreXY and CoreXZ bots.
+     *
+     * If steps differ, both axes are moving.
+     * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Y or Z, handled below)
+     * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X)
+     */
+    #if ENABLED(COREXY) || ENABLED(COREXZ)
+      #define X_CMP ==
+    #else
+      #define X_CMP !=
+    #endif
+    #define X_MOVE_TEST ( S_(1) != S_(2) || (S_(1) > 0 && D_(1) X_CMP D_(2)) )
+    #define X_AXIS_HEAD X_HEAD
+  #else
+    #define X_MOVE_TEST stepper.current_block->steps[X_AXIS] > 0
+    #define X_AXIS_HEAD X_AXIS
+  #endif
+
+  #if CORE_IS_XY || CORE_IS_YZ
+    /**
+     * Head direction in -Y axis for CoreXY / CoreYZ bots.
+     *
+     * If steps differ, both axes are moving
+     * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X or Y)
+     * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Y or Z)
+     */
+    #if ENABLED(COREYX) || ENABLED(COREYZ)
+      #define Y_CMP ==
+    #else
+      #define Y_CMP !=
+    #endif
+    #define Y_MOVE_TEST ( S_(1) != S_(2) || (S_(1) > 0 && D_(1) Y_CMP D_(2)) )
+    #define Y_AXIS_HEAD Y_HEAD
+  #else
+    #define Y_MOVE_TEST stepper.current_block->steps[Y_AXIS] > 0
+    #define Y_AXIS_HEAD Y_AXIS
+  #endif
+
+  #if CORE_IS_XZ || CORE_IS_YZ
+    /**
+     * Head direction in -Z axis for CoreXZ or CoreYZ bots.
+     *
+     * If steps differ, both axes are moving
+     * If DeltaA ==  DeltaB, the movement is only in the 1st axis (X or Y, already handled above)
+     * If DeltaA == -DeltaB, the movement is only in the 2nd axis (Z)
+     */
+    #if ENABLED(COREZX) || ENABLED(COREZY)
+      #define Z_CMP ==
+    #else
+      #define Z_CMP !=
+    #endif
+    #define Z_MOVE_TEST ( S_(1) != S_(2) || (S_(1) > 0 && D_(1) Z_CMP D_(2)) )
+    #define Z_AXIS_HEAD Z_HEAD
+  #else
+    #define Z_MOVE_TEST stepper.current_block->steps[Z_AXIS] > 0
+    #define Z_AXIS_HEAD Z_AXIS
+  #endif
+
+  // With Dual X, endstops are only checked in the homing direction for the active extruder
+  #if ENABLED(DUAL_X_CARRIAGE)
+    #define E0_ACTIVE stepper.current_block->active_extruder == 0
+    #define X_MIN_TEST ((X_HOME_DIR < 0 && E0_ACTIVE) || (X2_HOME_DIR < 0 && !E0_ACTIVE))
+    #define X_MAX_TEST ((X_HOME_DIR > 0 && E0_ACTIVE) || (X2_HOME_DIR > 0 && !E0_ACTIVE))
+  #else
+    #define X_MIN_TEST true
+    #define X_MAX_TEST true
+  #endif
+
+  /**
+   * Check and update endstops according to conditions
+   */
+
+  if (X_MOVE_TEST) {
+    if (stepper.motor_direction(X_AXIS_HEAD)) {
+      if (X_MIN_TEST) { // -direction
+        #if HAS_X_MIN
+          UPDATE_ENDSTOP(X, MIN);
+        #endif
+      }
+    }
+    else if (X_MAX_TEST) { // +direction
+      #if HAS_X_MAX
+        UPDATE_ENDSTOP(X, MAX);
+      #endif
+    }
+  }
+
+  if (Y_MOVE_TEST) {
+    if (stepper.motor_direction(Y_AXIS_HEAD)) { // -direction
+      #if HAS_Y_MIN
+        UPDATE_ENDSTOP(Y, MIN);
+      #endif
+    }
+    else { // +direction
+      #if HAS_Y_MAX
+        UPDATE_ENDSTOP(Y, MAX);
+      #endif
+    }
+  }
+
+  if (Z_MOVE_TEST) {
+    if (stepper.motor_direction(Z_AXIS_HEAD)) { // Z -direction. Gantry down, bed up.
+      #if HAS_Z_MIN
+        #if ENABLED(Z_DUAL_ENDSTOPS)
+
+          UPDATE_ENDSTOP_BIT(Z, MIN);
+          #if HAS_Z2_MIN
+            UPDATE_ENDSTOP_BIT(Z2, MIN);
+          #else
+            COPY_BIT(current_endstop_bits, Z_MIN, Z2_MIN);
+          #endif
+
+          test_dual_z_endstops(Z_MIN, Z2_MIN);
+
+        #else // !Z_DUAL_ENDSTOPS
+
+          #if ENABLED(Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN)
+            if (z_probe_enabled) UPDATE_ENDSTOP(Z, MIN);
+          #else
+            UPDATE_ENDSTOP(Z, MIN);
+          #endif
+
+        #endif // !Z_DUAL_ENDSTOPS
+
+      #endif // HAS_Z_MIN
+
+      // When closing the gap check the enabled probe
+      #if ENABLED(Z_MIN_PROBE_ENDSTOP)
+        if (z_probe_enabled) {
+          UPDATE_ENDSTOP(Z, MIN_PROBE);
+          if (TEST_ENDSTOP(Z_MIN_PROBE)) SBI(endstop_hit_bits, Z_MIN_PROBE);
+        }
+      #endif
+    }
+    else { // Z +direction. Gantry up, bed down.
+      #if HAS_Z_MAX
+
+        // Check both Z dual endstops
+        #if ENABLED(Z_DUAL_ENDSTOPS)
+
+          UPDATE_ENDSTOP_BIT(Z, MAX);
+          #if HAS_Z2_MAX
+            UPDATE_ENDSTOP_BIT(Z2, MAX);
+          #else
+            COPY_BIT(current_endstop_bits, Z_MAX, Z2_MAX);
+          #endif
+
+          test_dual_z_endstops(Z_MAX, Z2_MAX);
+
+        // If this pin is not hijacked for the bed probe
+        // then it belongs to the Z endstop
+        #elif DISABLED(Z_MIN_PROBE_ENDSTOP) || Z_MAX_PIN != Z_MIN_PROBE_PIN
+
+          UPDATE_ENDSTOP(Z, MAX);
+
+        #endif // !Z_MIN_PROBE_PIN...
+      #endif // Z_MAX_PIN
+    }
+  }
+
+  old_endstop_bits = current_endstop_bits;
+
+} // Endstops::update()

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/endstops.h

@@ -0,0 +1,102 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ *  endstops.h - manages endstops
+ */
+
+#ifndef ENDSTOPS_H
+#define ENDSTOPS_H
+
+#include "enum.h"
+
+class Endstops {
+
+  public:
+
+    static bool enabled, enabled_globally;
+    static volatile char endstop_hit_bits; // use X_MIN, Y_MIN, Z_MIN and Z_MIN_PROBE as BIT value
+
+    #if ENABLED(Z_DUAL_ENDSTOPS)
+      static uint16_t
+    #else
+      static byte
+    #endif
+        current_endstop_bits, old_endstop_bits;
+
+    Endstops() {};
+
+    /**
+     * Initialize the endstop pins
+     */
+    void init();
+
+    /**
+     * Update the endstops bits from the pins
+     */
+    static void update();
+
+    /**
+     * Print an error message reporting the position when the endstops were last hit.
+     */
+    static void report_state(); //call from somewhere to create an serial error message with the locations the endstops where hit, in case they were triggered
+
+    /**
+     * Report endstop positions in response to M119
+     */
+    static void M119();
+
+    // Enable / disable endstop checking globally
+    static void enable_globally(bool onoff=true) { enabled_globally = enabled = onoff; }
+
+    // Enable / disable endstop checking
+    static void enable(bool onoff=true) { enabled = onoff; }
+
+    // Disable / Enable endstops based on ENSTOPS_ONLY_FOR_HOMING and global enable
+    static void not_homing() { enabled = enabled_globally; }
+
+    // Clear endstops (i.e., they were hit intentionally) to suppress the report
+    static void hit_on_purpose() { endstop_hit_bits = 0; }
+
+    // Enable / disable endstop z-probe checking
+    #if HAS_BED_PROBE
+      static volatile bool z_probe_enabled;
+      static void enable_z_probe(bool onoff=true) { z_probe_enabled = onoff; }
+    #endif
+
+  private:
+
+    #if ENABLED(Z_DUAL_ENDSTOPS)
+      static void test_dual_z_endstops(const EndstopEnum es1, const EndstopEnum es2);
+    #endif
+};
+
+extern Endstops endstops;
+
+#if HAS_BED_PROBE
+  #define ENDSTOPS_ENABLED  (endstops.enabled || endstops.z_probe_enabled)
+#else
+  #define ENDSTOPS_ENABLED  endstops.enabled
+#endif
+
+
+#endif // ENDSTOPS_H

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/enum.h

@@ -0,0 +1,189 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef __ENUM_H__
+#define __ENUM_H__
+
+#include "MarlinConfig.h"
+
+/**
+ * Axis indices as enumerated constants
+ *
+ * Special axis:
+ *  - A_AXIS and B_AXIS are used by COREXY printers
+ *  - X_HEAD and Y_HEAD is used for systems that don't have a 1:1 relationship
+ *    between X_AXIS and X Head movement, like CoreXY bots
+ */
+enum AxisEnum {
+  NO_AXIS   = -1,
+  X_AXIS    = 0,
+  A_AXIS    = 0,
+  Y_AXIS    = 1,
+  B_AXIS    = 1,
+  Z_AXIS    = 2,
+  C_AXIS    = 2,
+  E_AXIS    = 3,
+  X_HEAD    = 4,
+  Y_HEAD    = 5,
+  Z_HEAD    = 6,
+  ALL_AXES  = 100
+};
+
+#define LOOP_S_LE_N(VAR, S, N) for (uint8_t VAR=S; VAR<=N; VAR++)
+#define LOOP_S_L_N(VAR, S, N) for (uint8_t VAR=S; VAR<N; VAR++)
+#define LOOP_LE_N(VAR, N) LOOP_S_LE_N(VAR, 0, N)
+#define LOOP_L_N(VAR, N) LOOP_S_L_N(VAR, 0, N)
+
+#define LOOP_NA(VAR) LOOP_L_N(VAR, NUM_AXIS)
+#define LOOP_XYZ(VAR) LOOP_S_LE_N(VAR, X_AXIS, Z_AXIS)
+#define LOOP_XYZE(VAR) LOOP_S_LE_N(VAR, X_AXIS, E_AXIS)
+#define LOOP_XYZE_N(VAR) LOOP_S_L_N(VAR, X_AXIS, XYZE_N)
+
+typedef enum {
+  LINEARUNIT_MM,
+  LINEARUNIT_INCH
+} LinearUnit;
+
+typedef enum {
+  TEMPUNIT_C,
+  TEMPUNIT_K,
+  TEMPUNIT_F
+} TempUnit;
+
+/**
+ * Debug flags
+ * Not yet widely applied
+ */
+enum DebugFlags {
+  DEBUG_NONE          = 0,
+  DEBUG_ECHO          = _BV(0), ///< Echo commands in order as they are processed
+  DEBUG_INFO          = _BV(1), ///< Print messages for code that has debug output
+  DEBUG_ERRORS        = _BV(2), ///< Not implemented
+  DEBUG_DRYRUN        = _BV(3), ///< Ignore temperature setting and E movement commands
+  DEBUG_COMMUNICATION = _BV(4), ///< Not implemented
+  DEBUG_LEVELING      = _BV(5), ///< Print detailed output for homing and leveling
+  DEBUG_MESH_ADJUST   = _BV(6), ///< UBL bed leveling
+  DEBUG_ALL           = 0xFF
+};
+
+enum EndstopEnum {
+  X_MIN,
+  Y_MIN,
+  Z_MIN,
+  Z_MIN_PROBE,
+  X_MAX,
+  Y_MAX,
+  Z_MAX,
+  Z2_MIN,
+  Z2_MAX
+};
+
+#if ENABLED(EMERGENCY_PARSER)
+  enum e_parser_state {
+    state_RESET,
+    state_N,
+    state_M,
+    state_M1,
+    state_M10,
+    state_M108,
+    state_M11,
+    state_M112,
+    state_M4,
+    state_M41,
+    state_M410,
+    state_IGNORE // to '\n'
+  };
+#endif
+
+#if ENABLED(ADVANCED_PAUSE_FEATURE)
+  enum AdvancedPauseMenuResponse {
+    ADVANCED_PAUSE_RESPONSE_WAIT_FOR,
+    ADVANCED_PAUSE_RESPONSE_EXTRUDE_MORE,
+    ADVANCED_PAUSE_RESPONSE_RESUME_PRINT
+  };
+
+  #if ENABLED(ULTIPANEL)
+    enum AdvancedPauseMessage {
+      ADVANCED_PAUSE_MESSAGE_INIT,
+      ADVANCED_PAUSE_MESSAGE_UNLOAD,
+      ADVANCED_PAUSE_MESSAGE_INSERT,
+      ADVANCED_PAUSE_MESSAGE_LOAD,
+      ADVANCED_PAUSE_MESSAGE_EXTRUDE,
+      ADVANCED_PAUSE_MESSAGE_OPTION,
+      ADVANCED_PAUSE_MESSAGE_RESUME,
+      ADVANCED_PAUSE_MESSAGE_STATUS,
+      ADVANCED_PAUSE_MESSAGE_CLICK_TO_HEAT_NOZZLE,
+      ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT
+    };
+  #endif
+#endif
+
+/**
+ * States for managing Marlin and host communication
+ * Marlin sends messages if blocked or busy
+ */
+#if ENABLED(HOST_KEEPALIVE_FEATURE)
+  enum MarlinBusyState {
+    NOT_BUSY,           // Not in a handler
+    IN_HANDLER,         // Processing a GCode
+    IN_PROCESS,         // Known to be blocking command input (as in G29)
+    PAUSED_FOR_USER,    // Blocking pending any input
+    PAUSED_FOR_INPUT    // Blocking pending text input (concept)
+  };
+#endif
+
+/**
+ * SD Card
+ */
+enum LsAction { LS_SerialPrint, LS_Count, LS_GetFilename };
+
+/**
+ * Ultra LCD
+ */
+enum LCDViewAction {
+  LCDVIEW_NONE,
+  LCDVIEW_REDRAW_NOW,
+  LCDVIEW_CALL_REDRAW_NEXT,
+  LCDVIEW_CLEAR_CALL_REDRAW,
+  LCDVIEW_CALL_NO_REDRAW
+};
+
+/**
+ * Dual X Carriage modes. A Dual Nozzle can also do duplication.
+ */
+#if ENABLED(DUAL_X_CARRIAGE) || ENABLED(DUAL_NOZZLE_DUPLICATION_MODE)
+  enum DualXMode {
+    DXC_FULL_CONTROL_MODE,  // DUAL_X_CARRIAGE only
+    DXC_AUTO_PARK_MODE,     // DUAL_X_CARRIAGE only
+    DXC_DUPLICATION_MODE
+  };
+#endif
+
+/**
+ * Workspace planes only apply to G2/G3 moves
+ * (and "canned cycles" - not a current feature)
+ */
+#if ENABLED(CNC_WORKSPACE_PLANES)
+  enum WorkspacePlane { PLANE_XY, PLANE_ZX, PLANE_YZ };
+#endif
+
+#endif // __ENUM_H__

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/example_configurations/AliExpress/CL-260/README.txt

@@ -0,0 +1,15 @@
+This is an example configuration for the CL-260 Ultimaker 2 clone.
+Change Z_MAX_POS to 300 for the CL-260MAX.
+
+(The printer is available on AliExpress; be aware that this is not a beginner's
+printer -- it needs tweaking and some parts replaced before being decent.)
+
+The printer comes with a quite old Marlin, the sources are available here:
+http://www.thingiverse.com/thing:1635830/ and I recommend replacing them.
+
+The setting "works" for my printer and the extruder using my calibration value.
+You might want to tweak some settings, e.g enable EEPROM, increase default Z speed, adjust homing speeds,...
+
+Have fun!
+--
+tobi

Ender-3 Firmware (Marlin)/Ender-3 (includes power failure resume- English)/Marlin/example_configurations/BQ/Hephestos_2/README.md

@@ -0,0 +1,22 @@
+# Example Configuration for BQ [Hephestos 2](http://www.bq.com/uk/hephestos-2)
+This configuration file is based on the original configuration file shipped with the heavily modified Marlin fork by BQ. The original firmware and configuration file can be found at [BQ Github repository](https://github.com/bq/Marlin).
+
+NOTE: The look and feel of the Hephestos 2 while navigating the LCD menu will change by using the original Marlin firmware.
+
+## Changelog
+ * 2016/03/01 - Initial release
+
+ * 2016/03/21 - Activated 4-point auto leveling by default
+                Updated miscellaneous z-probe values
+
+ * 2016/06/21 - Disabled hot bed related options
+                Activated software endstops
+                SD printing now disables the heater when finished
+
+ * 2016/07/13 - Update the `DEFAULT_AXIS_STEPS_PER_UNIT` for the Z axis
+                Increased the `DEFAULT_XYJERK`
+
+ * 2016/12/13 - Configuration updated.
+
+ * 2017/07/06 - Configuration updated to the latest Marlin version.
+                Added support for the official BQ heated bed kit.